Commit graph

28440 commits

Author SHA1 Message Date
Luka Perkov
7be0ed78e7 kernel: remove unused versions
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42462
2014-09-10 13:57:48 +00:00
Felix Fietkau
c772d71d05 atheros: enable the low_mem flag to better deal with 16M RAM devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42460
2014-09-10 13:50:10 +00:00
Felix Fietkau
96b74d4eef hostapd: add ubus bindings for wps
With this patch WPS discovery can be started or canceled over ubus if
WPS is enabled in wireless configuration. This is equivalent of
'hostapd_cli wps_pbc' and 'hostapd_cli wps_cancel' commands.

Signed-off-by: Petar Koretic <petar.koretic@sartura.hr>

SVN-Revision: 42459
2014-09-10 13:01:53 +00:00
Felix Fietkau
1961f8cdb7 ar71xx: ack completed tx descriptors only after the full frame has been completed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42457
2014-09-10 12:56:24 +00:00
Felix Fietkau
2dabf3a775 procd: allow adding empty strings to arrays
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42456
2014-09-10 12:56:19 +00:00
Luka Perkov
9ccacbaa40 imx6: fix image build for Generic profile.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 42455
2014-09-09 21:15:49 +00:00
Felix Fietkau
4ba3d616be ath9k: fix pll clock initialization on newer soc devices (fixes #14916)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42453
2014-09-09 08:03:00 +00:00
Hauke Mehrtens
54cd991725 kernel: drop 3.9 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42452
2014-09-08 19:55:36 +00:00
Hauke Mehrtens
eea3a89a6a gemini: drop kernel 3.9 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42451
2014-09-08 19:55:00 +00:00
Hauke Mehrtens
d0d537a039 gemini: switch to kernel 3.10
This switches to kernel 3.10 that was prepared by Hauke in r41531 :
    gemini: add support for kernel 3.10

    This is compile tested only, please run test and report back.

I've simply checked if it still compiles, unfortunately we didn't get
any feedback for this target.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42450
2014-09-08 19:54:22 +00:00
Hauke Mehrtens
a446681bc6 omap: add kernel 3.14 support
It has been compile-tested only so far. Please give it a try.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42449
2014-09-08 19:53:01 +00:00
Hauke Mehrtens
8313b329c6 kernel: add bcma patches sent upstream but not pushed yet
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42448
2014-09-08 19:50:53 +00:00
Hauke Mehrtens
e030c50502 kernel: update bcma to the version from wireless-testing master-2014-09-04 tag
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42447
2014-09-08 19:50:11 +00:00
John Crispin
4662c3b847 ralink: dwc_otg->dwc2
the old dwc_otg driver is starting to fall apart and fails on newer 3g
modems and some storage devices. switch to the upstream dwc2 driver which
is no longer in staging/.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42446
2014-09-08 17:33:16 +00:00
John Crispin
bdba024c7b ralink: add dwc2 device_reset() call
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42445
2014-09-08 17:32:52 +00:00
Felix Fietkau
3c5412e6c3 ath9k: add some ani related stability / performance fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42443
2014-09-08 16:45:30 +00:00
Felix Fietkau
76ca87a060 tools: fix mtools/dosfstools related build system warnings
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42442
2014-09-08 16:09:57 +00:00
Steven Barth
bd74df01b1 netifd: work-around kernel IPv6 on-link route issue
SVN-Revision: 42439
2014-09-08 14:45:56 +00:00
John Crispin
a4eae94a9c lantiq: add ath9k led pin support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42437
2014-09-08 14:29:18 +00:00
Zoltan Herpai
d4a2aa4f92 sunxi: re-add lradc driver in 3.14
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42436
2014-09-08 07:50:03 +00:00
Zoltan Herpai
d932a2bd62 tools: build dosfstools and mtools for sunxi
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42435
2014-09-07 23:38:03 +00:00
Felix Fietkau
60b81acd60 ath79: dev-eth: Don't advertise 1gbit in link code word on ar9331
While the AR9331 has a gigabit MAC towards the internal switch, the
integrated PHYs however are only 100-base-tx capable.  The existing code
however advertieses gigabit capability in the link status word.  If you
attach such a PHY to a gigabit capable switch on the remote end, with
some probability it attempts to negotiate gigabit and fails, falling
baco to the AR9331 assuming a 10mbit half-duplex link.  This has been
observed quite frequently with the Carambola2 and gigabit capable
switches.

In ath79_register_eth(), "pdata->has_gbit = 1;" is set unconditionally
for both AR9331 ethernet ports. This is most likely wrong. Despite the
two MAC IP cores being gigabit MACs, the MAC for eth1 is connected to a
100base-T PHY via MII. The has_gbit attribute is used in the ethernet
driver to determine the supported link modes.

So either pdata->has_gbit is not set to 1 anymore, or the ethernet
driver needs to be modified to determine the advertised link code word
on another criteria than pdata->has_gbit.  This patch implements the
former solution.

Signed-off-by: Harald Welte <laforge@gnumonks.org>

SVN-Revision: 42432
2014-09-07 09:45:32 +00:00
Jonas Gorski
288e50a79c mac80211: enable DFS support for ath9k/10k by default
The DFS pattern detector now supports all three regions; ETSI, FCC and
JP, so there is no reason to not have it enabled anymore.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42431
2014-09-07 09:38:13 +00:00
Jonas Gorski
68fcb15f90 toolchain/binutils: do not install host libiberty.a into target lib dir
Binutils target build will pick it up and break build on e.g. arm:

libtool: link: arm-openwrt-linux-uclibcgnueabi-gcc -shared  .libs/archive.o .libs/archures.o .libs/bfd.o .libs/bfdio.o .libs/bfdwin.o .libs/cache.o .libs/coffgen.o .libs/corefile.o .libs/format.o .libs/init.o .libs/libbfd.o .libs/opncls.o .libs/reloc.o .libs/section.o .libs/syms.o .libs/targets.o .libs/hash.o .libs/linker.o .libs/srec.o .libs/binary.o .libs/tekhex.o .libs/ihex.o .libs/stabs.o .libs/stab-syms.o .libs/merge.o .libs/dwarf2.o .libs/simple.o .libs/compress.o .libs/verilog.o .libs/elf32-arm.o .libs/elf32.o .libs/elf-nacl.o .libs/elf-vxworks.o .libs/elf.o .libs/elflink.o .libs/elf-attrs.o .libs/elf-strtab.o .libs/elf-eh-frame.o .libs/dwarf1.o .libs/elf32-gen.o .libs/cpu-arm.o   -L/mnt/dl/slave/at91/build/staging_dir/target-arm_arm926ej-s_uClibc-0.9.33.2_eabi/usr/lib -L/mnt/dl/slave/at91/build/staging_dir/target-arm_arm926ej-s_uClibc-0.9.33.2_eabi/lib -L/mnt/dl/slave/at91/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/usr/lib -L/mnt/dl/slave/at91/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/lib -L/mnt/dl/slave/at91/build/build_dir/target-arm_arm926ej-s_uClibc-0.9.33.2_eabi/binutils-2.24/bfd/../libiberty/pic -liberty -lz  -march=armv5te -mtune=arm926ej-s -mfloat-abi=soft -Wl,-lc -Wl,--as-needed -Wl,-lm -Wl,--no-as-needed   -Wl,-soname -Wl,libbfd-2.24.so -o .libs/libbfd-2.24.so
/mnt/dl/slave/at91/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/lib/libiberty.a: could not read symbols: File format not recognized

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42430
2014-09-07 09:38:10 +00:00
Felix Fietkau
60eeadd0ba ar71xx: re-enable descriptor splitting on ar716x after the previous bugfixes (#13072)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42429
2014-09-06 17:51:48 +00:00
Felix Fietkau
2da2317fed ar71xx: fix off-by-one error in packet descriptor splitting (patch from #13072)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42428
2014-09-06 17:51:44 +00:00
Felix Fietkau
05dd36a980 ar71xx: on ar716x, split ethernet packets in 512 byte chunks instead of 256 (improves performance) (patch from #13072)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42427
2014-09-06 17:51:39 +00:00
Felix Fietkau
efa2159e17 atheros: remove linux 3.10
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42426
2014-09-06 17:51:35 +00:00
Zoltan Herpai
044bf28357 sunxi: bump kernel to 3.14.16
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42425
2014-09-06 15:59:06 +00:00
Zoltan Herpai
b217763e41 sunxi: update pcDuino3 profile to the new u-boot
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42424
2014-09-06 15:57:08 +00:00
Zoltan Herpai
6833e90f0c sunxi: update Bananapi profile to the new u-boot
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42423
2014-09-06 15:23:30 +00:00
Zoltan Herpai
14cf28b284 uboot-sunxi: bump to 2014.04
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42422
2014-09-06 15:18:40 +00:00
Nicolas Thill
4ea085316e uml: bump to 3.14.16
Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 42421
2014-09-05 22:02:09 +00:00
Felix Fietkau
c329f79dd4 uclient: update to the latest version, fixes some crash issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42419
2014-09-04 11:25:04 +00:00
Florian Fainelli
d2a420fa22 at91: build images for AT91SAMA5D3XPLAINED
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42418
2014-09-03 03:11:25 +00:00
Florian Fainelli
7175e520e1 at91: add SAMA5D3 subtarget
Add a subtarget for Atmel's SAMA5D3 Cortex-A5 based SoCs.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42417
2014-09-03 03:11:11 +00:00
Florian Fainelli
00c0f4f27a at91: move legacy Kconfig options to subtarget
Some Kconfig options are only relevant for the legacy platforms, move
them where they belong

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42416
2014-09-03 03:10:59 +00:00
Florian Fainelli
640579bf49 at91: switch to 3.14
We need a new kernel version to support Cortex-A5 based platforms such
as SAMA5GD3.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42415
2014-09-03 03:10:47 +00:00
Florian Fainelli
892d571d07 at91: add 3.14 support
Add support for Linux 3.14 for the Atmel's AT91 platform.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42414
2014-09-03 03:10:18 +00:00
Florian Fainelli
035f68e858 at91: move 3.10 specific files and patches
In preparation for adding 3.14 kernel support, move files and patches to
a separate per-version directory since some of them will have
incompatible changes (e.g: dts)

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42413
2014-09-03 03:09:51 +00:00
Florian Fainelli
132676f1ac at91: add Kconfig symbol for CONFIG_USB_ATMEL_USBA
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42412
2014-09-03 03:09:36 +00:00
Florian Fainelli
5b0e7947e3 at91: add CONFIG_USB_OHCI_HCD_AT91 to usb-ohci
The at91 OHCI driver has a separate Kconfig symbol with newer kernels,
include it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42411
2014-09-03 03:09:24 +00:00
Florian Fainelli
5efbc41cbb at91: fix typo on Calao
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42410
2014-09-03 03:09:14 +00:00
Florian Fainelli
eb9730ddac include: add Cortex-A5 CPU_TYPE
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42409
2014-09-03 03:09:03 +00:00
Florian Fainelli
c2b92f9ef4 at91: create a legacy subtarget
In preparation for adding SAMA5D3 support, move the legacy ARMv5 based
platforms to a separate subtarget.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42408
2014-09-03 03:08:51 +00:00
John Crispin
f769949e72 mdns: update to latest git head
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42407
2014-09-02 21:39:40 +00:00
Felix Fietkau
833c5aab7e mtd: disable trx_check() for ar71xx, fixes a regression introduced in r42403
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42405
2014-09-02 21:06:35 +00:00
Felix Fietkau
766dff7445 mtd: Fix trx check after partition rename ("linux" to "firmware")
On brcm47xx (Huawei E970), I noticed that sysupgrade now tries to flash trx images which don't fit into the flash, resulting in non-booting system.

I found that mtd does trx size checking only when flashing to a partition called "linux". This patch changes this to be "firmware".

This matches the following patch which changed partition name in bcm47xxpart.c driver to "firmware":

commit 86b4d5ef68ca77ff6724ebb9bddd6b93239c87fc
Author: hauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73>
 Date:   Sun Dec 1 16:32:32 2013 +0000

    brcm47xx: use "firmware" partition name
    ...
    Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

    SVN-Revision: 38973

Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>

SVN-Revision: 42403
2014-09-02 17:13:42 +00:00
Felix Fietkau
366007c3d8 omap: remove 3.12 kernel patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42401
2014-09-02 17:00:46 +00:00
Felix Fietkau
1839d1b912 cns3xxx: support isolated PCI interrupts on newer Laguna PCBs
The cns3xxx uses irq61 for pcie0_intr which in the case of a PCIe-to-PCI
bridge ends up combining INTA/B/C/D on a single ARM CPU interrupt. This is
not optimal when you have multiple cores. To overcome this limitation an
enhancement was made on newer Laguna PCB's that support miniPCI cards
to route the INTA/B/C/D signals to unique external ARM CPU interrupts which
can help balance CPU core utilization and in some cases increase overall
system performance or responsiveness.

For more details see:
 http://trac.gateworks.com/wiki/multicoreprocessing#PCIInterruptsteering

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42400
2014-09-02 16:44:40 +00:00