Commit graph

1142 commits

Author SHA1 Message Date
Christian Lamparter
7783f31359 base-files: nand: use CI_KERNPART whenever the kernel volume is needed
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.

To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
This patch is in continuation of: commit 93aa860405
"procd: nand: make it possible to configure kernel and ubi partition"

The $CI_KERNPART variable should be used in place
of the fixed "kernel" partition name. This allows
targets to specifiy alternate names for the kernel
partition.

Cc: Chris Blake <chrisrblake93@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
2017-05-31 09:55:01 +02:00
Matthias Schiffer
a5428244d9
base-files: add support for staged sysupgrades from failsafe mode
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:33 +02:00
Matthias Schiffer
b2adb9a7b5
base-files: sysupgrade cleanup
Some functions only used by stage2 are moved there from common.sh.

One piece that could still use more cleanup is platform_pre_upgrade: many
targets reference files from there are aren't available in the ramfs, so
we need to evaluate it before the switch; conversely, flash writes happen
in that function on some targets. Targets that do the latter should be
fixed eventually to use platform_do_upgrade for that purpose.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:33 +02:00
Matthias Schiffer
30f61a34b4
base-files: always use staged sysupgrade
Support for the -d and -p options is dropped; it may be added again at some
point by adding these flags to the ubus sysupgrade call.

A downside of this is that we get a lot less information about the progress
of the upgrade: as soon as the actual upgrade starts, all shell sessions
are killed to allow unmounting the root filesystem.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:32 +02:00
Matthias Schiffer
393817df5d
procd: remove procd-nand package
We always want to support staged upgrades now, so it's better to include
upgraded into the main package. /lib/upgrade/nand.sh is moved to
base-files.

The procd-nand-firstboot package is removed for now, it may return later
as a separate package.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:32 +02:00
Jo-Philipp Wich
361c8b4ee4 Revert "sysupgrade: run only one instance at a time."
This reverts commit e96a9a9af8.

The change breaks sysupgrade through LuCI and two-stage sysupgrade on
NAND targets. There is also a mismatch of file paths in lock and unlock
operations.

This commit was apparently neither properly tested, nor reviewed, so
drop it for now.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-26 14:49:08 +02:00
Kenneth Johansson
e96a9a9af8 sysupgrade: run only one instance at a time.
Things do not work well if running multiple instances of
upgrade at the same time.

Signed-off-by: Kenneth Johansson <kenneth.johansson@inteno.se>
2017-05-25 09:22:43 +02:00
Alexandru Ardelean
c7ee30d53a base-files: fix default procd reload
Bug introduced with 6713694.

I did not count on procd handling reload as mentioned
in this doc:
https://wiki.openwrt.org/inbox/procd-init-scripts

```
procd_set_param file /var/etc/your_service.conf # /etc/init.d/your_service reload will restart the daemon if these files have changed
procd_set_param netdev dev # likewise, except if dev's ifindex changes.
procd_set_param data name=value ... # likewise, except if this data changes.
```

The service would be restarted regardless of any of those params.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2017-05-20 20:43:45 +02:00
Alberto Bursi
4242ddf8f2 base-files: add led functions to uci-defaults.sh
uci_set_leds_ataport() allows to set a led to show activity
on a specific (s)ata port, which is needed for devices that have
a Sata led for each sata port.
The led trigger is from the 834-ledtrig-libata.patch LEDE kernel patch.

uci_set_leds_usbhost() allows to set a led to show total usb activity.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
[Jo-Philipp Wich: use a single underscore to denote private functions]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-14 21:45:50 +02:00
Alberto Bursi
b06a286a48 base-files: cleanup led functions in uci-defaults.sh
create a function with code common to all led functions,
create another function with code common to functions setting
a simple led trigger, restore alphabetical order in function names.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
[Jo-Philipp Wich: use a single underscore to denote private functions]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-14 21:45:50 +02:00
Jo-Philipp Wich
65de093c18 base-files: implement ucidef_set_hostname(), ucidef_set_ntpserver()
Commit 2036ae4 (base-files: support hostname and ntp servers through board.d)
was supposed to implement these procedures but lacked the required changes
to uci-defaults.sh.

Add the missing procedures now to fix config generation on targets relying
on hostname or NTP server presetting.

Fixes FS#754.

Reported-by: Cristian Morales Vega <cristian@samknows.com>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-03 13:47:57 +02:00
Alexandru Ardelean
6713694fe4 base-files: use restart if no reload hook for service
This was also working before, with a slightly
different semantic.

[ Original semantic ]
If no reload hooks was implemented, the default one would
kick in, it would return fail, and restart would happen.

This would happen also in the case where a reload hook
would be implemented, it would fail, and it would restart
the service.

[ New semantic ]
The default reload hook calls restart.
Services can implement their own reload.

If reload fails, then the '/etc/init.d/<service> reload'
would return a non-zero code, and the caller can choose
a way to handle this.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2017-04-12 09:54:21 +02:00
Felix Fietkau
ec99142474 base-files: add generic board_name function to functions.sh
This will be used to replace all those nasty board specific scripts
that do basically the same thing

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-22 11:43:21 +01:00
Vitaly Chekryzhev
01337ba472 build: add devel option to store build config in firmware
Store config.seed in firmware /etc/build.config

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
2017-03-18 12:08:04 +01:00
Mathias Kresin
0f01253b25 base-files: always set proto passed to _ucidef_set_interface()
Overwrite an already set proto if a new one is passed to
_ucidef_set_interface() similar to what is done for the interface.

It is required when using ""ucidef_set_interface_wan 'ptm0' 'pppoe'"
after some initial wan interface configuration is already done by
ucidef_add_switch.

The "json_is_a protocol string" guard is meant to not reset an earlier
set interface proto in case something like
"ucidef_set_interface_lan 'eth0'" is used afterwards.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 13:45:00 +01:00
Lucian Cristian
8e75efc0fb base-files: add submission service port
prevent postfix start failure fatal: 0.0.0.0:submission: Unrecognized service

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2017-03-11 05:53:33 +01:00
Felix Fietkau
9dcb921d90 build: add buildbot specific config option for setting defaults
This can be used to tweak the buildbot behavior without having to change
buildbot's configuration.
It will also allow us to add more aggressive clean steps (e.g. on
toolchain changes), which would break developers' workflows if enable
by default.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-14 14:18:35 +01:00
David Pinilla Caparrós
a896611acd base-files: Added a deprecation notice on wifi detect
When running wifi detect, the user will be told on error output that
wifi detect is deprecated, that wifi config must be used instead. Also
the commit that changes it is referenced for further info.

Signed-off-by: David Pinilla Caparrós <dpinitux@gmail.com>
2017-02-13 10:24:32 +01:00
David Pinilla Caparrós
f6d3ea8c8a base-files: Add wifi config to wifi command usage
Since commit 5f8f8a3661 wifi detect does
not longer work and wifi config it's used to configure not yet
configured wireless devices.

This commit changes command usage to reflect that change.

Signed-off-by: David Pinilla Caparrós <dpinitux@gmail.com>
2017-02-13 10:24:32 +01:00
Jo-Philipp Wich
73d923ed6b base-files: emit tagged switch configuration by default
Instead of only using tagged CPU port configurations when more than one VLAN
is present on the switch, always emit tagged configurations unless a board
explicitely opts out of this behaviour by using the previously introduced
[0-9]u@netdev syntax.

Emitting default tagged configurations has the following benefits:

 - Relation of switch vlans to netdevs is easier to understand, especially
   for multi-cpu-port switches

 - Adding additional VLANs (e.g. to break out a LAN port for other purposes)
   becomes easier as users are not forced to change the existing untagged
   VLAN to tagged and the existing ifname notation from ethX to ethX.Y
   anymore, drastly reducing the likelyhood of soft-bricks.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-02 00:13:49 +01:00
Mathias Kresin
60fce1258c base-files: don't overwrite model name set by target
The condition is always true due to the literal string followed the
-n test parameter. A model name set by target scripts always gets
overwritten this way.

Change the condition to check for an already existing destination file
as it was before 5e85ae9 ("base-files: fix error message during boot").

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-30 08:55:41 +01:00
Yousong Zhou
034bed3707 base-files: uppercase default hostname: LEDE
The name will appear in shell prompt and LuCI page title.  Uppercase
letters seem to be more vigorous

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-26 18:10:10 +01:00
Matthias Schiffer
86ccaf4c18
base-files: fix user creation on sysupgrade with few opkg control files
If only a single opkg control file exists (which can happen with
CONFIG_CLEAN_IPKG), grep would not print the file name by default. Instead
of forcing it using -H, we just switch to -l (print only file names) and
get rid of the cut.

Add -s to suppress an error message when no control files exist.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-01-24 19:08:41 +01:00
Hans Dedecker
5f7a081553 base-files: add /etc/iproute2/rt_protos
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-01-18 13:15:28 +01:00
Matthias Schiffer
b9a408c2b4
base-files: add ARCH_PACKAGES to openwrt_release and os-release
Knowing the package architecture at runtime can be useful, e.g. to
configure opkg repository URLs. The value of ARCH_PACKAGES ("%A" in
VERSION_SED) as added to openwrt_release (as DISTRIB_ARCH) and os-release
(as LEDE_ARCH).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-01-16 13:29:47 +01:00
Felix Fietkau
9cdf852ae0 opkg: drop S/MIME support
It has never been used by default (due to being too bloated), and it is
properly replaced by usign (which has been the default for a long time
now).

Remove this feature to simplify the build system

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 13:44:25 +01:00
Felix Fietkau
7304510392 base-files: save /bin/mknod for sysupgrade
It is used on NAND devices in case hotplug is too slow

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-06 15:34:14 +01:00
Yousong Zhou
6f61d8511e base-files: export x86 platform upgrade functions to common.sh
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-05 11:09:14 +01:00
Felix Fietkau
84bd74057f build: use mkhash to replace various quirky md5sum/openssl calls
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-05 11:09:12 +01:00
Alberto Bursi
8496659eb4 base-files: fix message of initscript wrapper
currently (after blogic's edit to my commit) it prints like this:

root@lede:/# service aa
aa does not exist. the following services are available :adblock       dnsmasq       gpio_switch   rpcd          system
boot          done          led           sqm           uhttpd
crelay        dropbear      log           sysctl        umount
cron          firewall      network       sysfixtime    urandom_seed
ddns          fstab         odhcpd        sysntpd

which looks pretty bad, and is even worse if someone writes only "service" without arguments, as it will print " does not exist. " which is confusing.

with this commit it looks like this:

root@lede:/# service
service "" not found, the following services are available:
adblock       dnsmasq       gpio_switch   rpcd          system
boot          done          led           sqm           uhttpd
crelay        dropbear      log           sysctl        umount
cron          firewall      network       sysfixtime    urandom_seed
ddns          fstab         odhcpd        sysntpd

Yes there is some play with " and ', it is to display "name" or just "" if no service name is entered (like in the example).

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-01-02 16:47:59 +01:00
Rafał Miłecki
b522292405 base-files: add support for overlaying rootfs content
This adds support for install-overlay define. When used in package it
allows installing files to a special directory that gets copied to the
root when installing it.
It allows overwriting files provided by other packages.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-20 09:35:36 +01:00
Jo-Philipp Wich
e0b8b24cfb base-files: fix CONFIG_VERSION_DIST default
Fix the default value of CONFIG_VERSION_DIST to use uppercase "LEDE".

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-14 19:55:20 +01:00
Jo-Philipp Wich
a4232cd4bf build: use SNAPSHOT instead of CURRENT to designate untagged branch builds
Calling a build ##.##-CURRENT might mislead users into thinking that this
build is the most current release of a branch.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-14 18:43:49 +01:00
Julian Labus
b0ac825884 base-files: Changed UCI variable name for GPIO value from 'default' to 'value'
This changes the UCI variable for the GPIO value from system.$cfg.default back
to system.$cfg.value as it was before the change from uci-defaults [1] to board.d.
/etc/init.d/gpio_switch [2] still expects the value to be in system.$cfg.value.

[1] d65916047b/package/base-files/files/lib/functions/uci-defaults.sh (L197)
[2] https://github.com/lede-project/source/blob/master/package/base-files/files/etc/init.d/gpio_switch#L17

Signed-off-by: Julian Labus <julian@labus-online.de>
2016-12-12 09:57:40 +01:00
Jo-Philipp Wich
9791fb2ac2 build: support adding version code to file names (FS#323)
Now that the VERSION_NUMBER variable holds the human friendly name and not
the commit ID anymore, we need to support adding the revision ID as well.

Introduce a new config variable CONFIG_VERSION_CODE_FILENAMES which, if set,
causes the resulting file names to contain a commit ID designation as printed
by scripts/getver.sh.

Also sanitize the input variables to ensure that the resulting strings are
lowercased and no not contain spaces.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-09 17:16:43 +01:00
Felix Fietkau
81b5e8e5d2 base-files: add a hint in sysupgrade that shows what to do when the image metadata check fails
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-04 11:41:49 +01:00
Jo-Philipp Wich
5f3c96c285 build: adjust version number handling
Move the revision info to the VERSION_CODE variable and default VERSION_NUMBER
to CURRENT for master branch builds.

Also introduce a new menuconfig option CONFIG_VERSION_CODE which allows users
to override the revision value put into VERSION_CODE and adjust the template
files used by the base-files package to accomodate for the changed semantics.

While we're at it, also adjust the various URLs to match the current web site.

After this commit, the relevent files will look like the examples given below:

    # cat /etc/openwrt_version
    r2398+1

    # cat /etc/openwrt_release
    DISTRIB_ID='LEDE'
    DISTRIB_RELEASE='CURRENT'
    DISTRIB_REVISION='r2398+1'
    DISTRIB_CODENAME='reboot'
    DISTRIB_TARGET='x86/64'
    DISTRIB_DESCRIPTION='LEDE Reboot CURRENT r2398+1'
    DISTRIB_TAINTS='no-all override'

    # cat /usr/lib/os-release
    NAME="LEDE"
    VERSION="CURRENT, Reboot"
    ID="lede"
    ID_LIKE="lede openwrt"
    PRETTY_NAME="LEDE Reboot CURRENT"
    VERSION_ID="current"
    HOME_URL="http://lede-project.org/"
    BUG_URL="http://bugs.lede-project.org/"
    SUPPORT_URL="http://forum.lede-project.org/"
    BUILD_ID="r2398+1"
    LEDE_BOARD="x86/64"
    LEDE_TAINTS="no-all override"
    LEDE_DEVICE_MANUFACTURER="LEDE"
    LEDE_DEVICE_MANUFACTURER_URL="http://lede-project.org/"
    LEDE_DEVICE_PRODUCT="Generic"
    LEDE_DEVICE_REVISION="v0"
    LEDE_RELEASE="LEDE Reboot CURRENT r2398+1"

On a release branch, those files would look like:

    # cat /etc/openwrt_version
    r2399

    # cat /etc/openwrt_release
    DISTRIB_ID='LEDE'
    DISTRIB_RELEASE='16.12-CURRENT'
    DISTRIB_REVISION='r2399'
    DISTRIB_CODENAME='test_release'
    DISTRIB_TARGET='x86/64'
    DISTRIB_DESCRIPTION='LEDE Test Release 16.12-CURRENT r2399'
    DISTRIB_TAINTS='no-all override'

    # cat /usr/lib/os-release
    NAME="LEDE"
    VERSION="16.12-CURRENT, Test Release"
    ID="lede"
    ID_LIKE="lede openwrt"
    PRETTY_NAME="LEDE Test Release 16.12-CURRENT"
    VERSION_ID="16.12-current"
    HOME_URL="http://lede-project.org/"
    BUG_URL="http://bugs.lede-project.org/"
    SUPPORT_URL="http://forum.lede-project.org/"
    BUILD_ID="r2399"
    LEDE_BOARD="x86/64"
    LEDE_TAINTS="no-all override"
    LEDE_DEVICE_MANUFACTURER="LEDE"
    LEDE_DEVICE_MANUFACTURER_URL="http://lede-project.org/"
    LEDE_DEVICE_PRODUCT="Generic"
    LEDE_DEVICE_REVISION="v0"
    LEDE_RELEASE="LEDE Test Release 16.12-CURRENT r2399"

On a release tag, those files would look like:

    # cat /etc/openwrt_version
    r2500

    # cat /etc/openwrt_release
    DISTRIB_ID='LEDE'
    DISTRIB_RELEASE='17.02.1'
    DISTRIB_REVISION='r2500'
    DISTRIB_CODENAME='mighty_unicorn'
    DISTRIB_TARGET='x86/64'
    DISTRIB_DESCRIPTION='LEDE Mighty Unicorn 17.02.1 r2500'
    DISTRIB_TAINTS='no-all override'

    # cat /usr/lib/os-release
    NAME="LEDE"
    VERSION="17.02.1, Mighty Unicorn"
    ID="lede"
    ID_LIKE="lede openwrt"
    PRETTY_NAME="LEDE Mighty Unicorn 17.02.1"
    VERSION_ID="17.02.1"
    HOME_URL="http://lede-project.org/"
    BUG_URL="http://bugs.lede-project.org/"
    SUPPORT_URL="http://forum.lede-project.org/"
    BUILD_ID="r2500"
    LEDE_BOARD="x86/64"
    LEDE_TAINTS="no-all override"
    LEDE_DEVICE_MANUFACTURER="LEDE"
    LEDE_DEVICE_MANUFACTURER_URL="http://lede-project.org/"
    LEDE_DEVICE_PRODUCT="Generic"
    LEDE_DEVICE_REVISION="v0"
    LEDE_RELEASE="LEDE Mighty Unicorn 17.02.1 r2500"

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Acked-by: Felix Fietkau <nbd@nbd.name>
2016-12-02 16:02:02 +01:00
Alberto Bursi
d52676d1ea base-files: add a wrapper for init scripts in profile
"service" is a simple wrapper that will allow to call init.d scripts

current method:     #  /etc/init.d/network reload
with the wrapper:   #  service network reload

If the wrapper is called without arguments or with a wrong init script name, it will print an error and list the content of /etc/init.d/ folder

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-11-29 21:12:08 +01:00
Jonas Gorski
48cfc826eb base-files: ignore failure of stopping services on removal
Packages that do a killall <cmd> with the same name as the init script
will fail the prerm step when the service isn't running. Do make them
removable without having to restart the service, ignore the return code.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
2016-11-21 18:40:15 +01:00
Jonas Gorski
afaa34ccd7 base-files: don't modify enabled state of service on upgrade
Properly stop/start services on upgrade, but don't change the enabled
state.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
2016-11-21 18:40:15 +01:00
Felix Fietkau
cc853810a4 base-files: validate metadata of sysupgrade images
Use fwtool to extract it, only require metadata to be present if the
platform sysupgrade script sets REQUIRE_IMAGE_METADATA=1

Image metadata is in JSON format and contains a list of supported
devices, along with version information that could be displayed by a UI
later before the actual upgrade happens.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-19 11:24:09 +01:00
Marek Lindner
9978a3e2ca base-files: Prefer busybox arp over /proc/net/arp alias
A firmware compiled with BUSYBOX_CONFIG_ARP should also use by default the
arp binary from busybox. Otherwise the extra functionality the user
requested can only be used when running arp with the path to the binary.

Signed-off-by: Marek Lindner <marek.lindner@open-mesh.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-11-10 16:12:52 +01:00
Christian Lamparter
5f8f8a3661 base-files, mac80211, broadcom-wl: wifi detection and configuration
Currently, the wifi detection script is executed as part of
the (early) boot process. Pluggable wifi USB devices, which
are inserted at a later time are not automatically
detected and therefore they don't show up in LuCI.

A user has to deal with wifi detection manually, or restart
the router.

However, the current "sleep 1" window - which the boot
process waits for wifi devices to "settle down" - is too
short to detect wifi devices for some routers anyway.

For example, this can happen with USB WLAN devices on the
WNDR4700. This is because the usb controller needs to load
its firmware from UBI and initialize, before it can operate.

The issue can be seen on a BT HomeHub 5A as well as soon as
the caldata are on an ubi volume. This is because the ath9k
card has to be initialized by owl-loader first. Which has to
wait for the firmware extraction script to retrieve the pci
initialization values inside the caldata.

This patch moves the wifi configuration to hotplug scripts.
For mac80211, the wifi configuration will now automatically
run any time a "ieee80211" device is added. Likewise
broadcom-wl's script checks for new "net" devices which
have the "wl$NUMBER" moniker.

Issues with spawning multiple interface configuration - in
case the detection script is run concurrently - have been
resolved by using a named section for the initial
configuration. Concurrent configuration scripts will now
simply overwrite the same existing configuration.

A workaround which preserves the "sleep 1" window for just
the first boot has been added. This allows the existing
brcm47xx boot and mvebu uci-default scripts to correctly
setup the initial mac addresses and regulatory domain.

And finally, the patch renames the "wifi detect" into
"wifi config". As the script no longer produces any output
that has to be redirected or appended to the configuration
file.

Thanks to Martin Blumenstingl for helping with the implementation
and testing of the patch.

Acked-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-03 11:08:01 +01:00
Christian Lamparter
5e35b4562f base-files, mac80211, broadcom-wl: use uci to populate wireless config
Previously, wifi detect simply dumped its generated wireless
configuration to STDOUT. A second step was needed to append
the configuration to /etc/config/wireless (or create it, if
it didn't exist).

With this patch, The wifi detection script will now use uci
to update the wireless configuration directly.

This patch also makes the initially created wifi-iface a
named section ('default_radio$X' for mac80211 and
'default_wl$X' for broadcom). With this change, uci will
not print the cfgHASH to STDOUT (which would now corrupt
the wireless configuration). It will also prevent adding
duplicated wifi interface configurations, if the wifi
configuration is run concurrently.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-11-03 11:08:01 +01:00
Mathias Kresin
ba3540db62 base-files: generate /etc/config/wireless, if it doesn't exist
This patch adds a check in "wifi detect" to test if the wireless
configuration file does exist. If it doesn't exist, an empty
/etc/config/wireless file will be created.

This is necessary because uci doesn't create new files,
instead the tool just exits with "uci: Entry not found".

Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-11-03 11:08:01 +01:00
Jo-Philipp Wich
5e0441aaf0 base-files: uci-defaults: support requesting untagged switch port configuration
Introduce support for a new [0-9]u@netdev syntax to ucidev_add_switch() to let
board.d network files request default network switch configurations which do
not use tagged CPU ports.

This commit itself has no effect on generated configurations at the moment
since we still emit untagged configurations by default but it allows boards to
opt-out from default tagged configs in case we start emitting tagged settings
by default.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-02 01:06:29 +01:00
Petr Štetiar
9e8e8b7253 base-files: sysfixtime: Keep RTC time in UTC timezone
We need to tell hwclock with -u commandline option, that we would like
to keep our RTC clock in UTC timezone. Linux kernel expects RTC in UTC
timezone anyway.

In current state of things, we don't tell hwclock to load/store time
from/to RTC in UTC timezone so it uses the timezone from the system
time. If it's set to different timezone then UTC, sysfixtime is going to
screw the time in RTC.

I've following in the setup script:

  uci set system.@system[0].timezone='CET-1CEST,M3.5.0,M10.5.0/3'
  uci set system.@system[0].zonename='Europe/Prague'

I've this RTC setup (rtc1 is RTC on i.MX6 SoC, rtc0 is battery backed RTC mcp7941x):

  rtc-ds1307 3-006f: rtc core: registered mcp7941x as rtc0
  snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1

Then we can experience following (current time is 10:15am):

	$ date
	Fri Oct 21 10:15:07 CEST 2016

	$ hwclock -r -f /dev/rtc0
	Fri Oct 21 08:14:46 2016  0.000000 seconds

	$ hwclock -u -r -f /dev/rtc0
	Fri Oct 21 10:14:46 2016  0.000000 seconds

And after current broken sysfixtime:

	$ /etc/init.d/sysfixtime stop

	$ date
	Fri Oct 21 10:15:25 CEST 2016

	$ hwclock -r -f /dev/rtc0
	Fri Oct 21 10:15:31 2016  0.000000 seconds

Now we've time in our battery backed RTC in CEST timezone instead of
UTC.  Then once again, but with this patch applied to sysfixtime, where
hwclock is using correctly the -u parameter:

	$ /etc/init.d/sysfixtime stop

	$ date
	Fri Oct 21 10:15:53 CEST 2016

	$ hwclock -r -f /dev/rtc0
	Fri Oct 21 08:15:55 2016  0.000000 seconds

Signed-off-by: Petr Štetiar <ynezz@true.cz>
Acked-by: Jo-Philipp Wich <jo@mein.io>
2016-10-31 16:33:19 +01:00
Chris Blake
b745bfa6dc base-files: Ensure reset only works if an overlay exists
Currently the reset script will try to run jffs2reset on boards that are
running a rw rootfs, such as ext4. This will cause jffs2reset to fail
and the board to never reboot while the LED blinks until a manual
reboot.

This commit does two different things:
1. Disables reset on boards that do not have an overlay mount
2. Disables the Blinking LED after 5 seconds if the board does not
support reset

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-10-27 12:45:05 +02:00
André Valentin
783875f18b package/basefiles: add mkfs.ext4 and losetup binaries to ramfs list
mkfs.ext4 und losetup are needed for sysupgrade support on mmc devices
with automatic rootfs split (loopback device usage).

Signed-off-by: André Valentin <avalentin@marcant.net>
2016-10-26 12:37:47 +02:00
Rafał Miłecki
2187f57db6 base-files: add ucidef_set_led_usbport for full usbport support
This helper allows using usbport trigger directly. It requires usbport
compatible syntax and supports specifying multiple USB ports, e.g.:
ucidef_set_led_usbport "usb" "USB" "devicename:colour:function" "usb1-port1" "usb2-port1"

This adds a proper object to the board.json, e.g.
"usb": {
	"name": "USB",
	"type": "usbport",
	"sysfs": "devicename:colour:function",
	"ports": [
		"usb1-port1",
		"usb2-port1"
	]
}
and supports translating it into uci section.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-22 11:16:01 +02:00