KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
30610 commits 3 branches 0 tags 154 MiB
Commit graph

13563 commits

Author SHA1 Message Date
Felix Fietkau
75e828c117 ar71xx: fix a double dereference in the unaligned access patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44885
 2015-03-19 11:58:30 +00:00
Felix Fietkau
2077b18e6b x86_64: remove unused patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44884
 2015-03-19 11:58:22 +00:00
Imre Kaloz
e3d19988cf mvebu: add Linux 4.0 support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44882
 2015-03-19 10:25:44 +00:00
Imre Kaloz
05bf6e0f2e generic/4.0: fix ubi EOF marker patch 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44881
 2015-03-19 10:13:21 +00:00
Imre Kaloz
0d8d48641d generic/4.0: add missing symbols 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44880
 2015-03-19 10:11:20 +00:00
Felix Fietkau
b011293d0b kernel: replace GRO optimization patch with a new one that supports VLANs/bridges with different MAC addresses 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44877
 2015-03-18 18:22:41 +00:00
Felix Fietkau
17afb853ee kernel: bump to 3.14.35, 3.18.9, 3.19.1 and 4.0-rc4 
also refresh generic patches for 3.14, 3.18, 3.19 and 4.0
targets might need a minor refresh as well, however, it looks
like everything still applies cleanly with occasional small
offsets.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44876
 2015-03-18 18:21:08 +00:00
Jonas Gorski
87568ebeac b53: reverse duplex bit meaning for IMP state override register 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44875
 2015-03-18 10:44:15 +00:00
Felix Fietkau
f30358d41a kernel: remove the netfilter optimization that skips the filter table, it has caused too many issues 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44873
 2015-03-17 17:14:48 +00:00
John Crispin
553528371b ralink: fix mt7621 i2c name 
Signed-off-by: zouxf <fl.service@t-firefly.com>

SVN-Revision: 44868
 2015-03-17 09:44:14 +00:00
John Crispin
29cf72ac07 lantiq/xrx200: cleanup default packages 
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44867
 2015-03-17 09:44:06 +00:00
John Crispin
55a71c1374 ar71xx: adjust OM5P profile for the OpenMesh OM5P-AN board 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 44866
 2015-03-17 09:43:56 +00:00
John Crispin
10c5a44017 ar71xx: enable sysupgrade for the OpenMesh OM5P-AN 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 44863
 2015-03-17 09:43:37 +00:00
John Crispin
85cceb5dd0 ar71xx: add user-space support for the OpenMesh OM5P-AN 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 44862
 2015-03-17 09:43:31 +00:00
John Crispin
17a1e18ee2 ar71xx: add kernel support for the OpenMesh OM5P-AN board 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 44861
 2015-03-17 09:43:19 +00:00
John Crispin
2a0fcc029f ar71xx: detect GL.iNet model 
There are two versions of the GL.iNet, the 6408A and the 6416A. The only
difference is the flash size.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 44860
 2015-03-17 09:43:13 +00:00
John Crispin
986af9e64e lantiq: make xrx200 targets use the upstream dwc2 driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44857
 2015-03-17 09:42:56 +00:00
Felix Fietkau
caf94290ce kernel: add a few more missing config symbols 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44856
 2015-03-17 07:24:51 +00:00
Rafał Miłecki
76811de003 brcm47xx: support SPROM/NVRAM prefixes 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44855
 2015-03-17 07:07:17 +00:00
Rafał Miłecki
917fb76321 brcm47xx: rename (and refresh) MTD patch for safety "nvram" partition 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44854
 2015-03-17 07:07:00 +00:00
Rafał Miłecki
8f63c1405f brcm47xx: switch to 3.18 
Tested on BCM5357B0, BCM47186B0 and BCM4706.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44853
 2015-03-16 23:05:43 +00:00
Rafał Miłecki
7c6f7b716b bcm53xx: switch to 3.18 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44852
 2015-03-16 22:24:56 +00:00
Felix Fietkau
768cf6821f x86: refresh kvm_guest kernel config 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44851
 2015-03-16 21:17:45 +00:00
Felix Fietkau
06cb90f8a2 kernel: add missing config symbol 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44850
 2015-03-16 21:17:41 +00:00
Felix Fietkau
6c42f140a0 x86: enable rtl8139 ethernet support for geode by default 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44849
 2015-03-16 21:00:14 +00:00
Florian Fainelli
1488ed7c2c brcm63xx: switch maintainer 
Make Jonas the maintainer of brcm63xx.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 44848
 2015-03-16 19:51:17 +00:00
Felix Fietkau
2777b525c6 geode: set target to Geode GX1 to support older chips 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44847
 2015-03-16 18:10:17 +00:00
Jonas Gorski
343ec8d645 brcm63xx: use consistent gpio chip labeling for OF/non-OF 
Ensure gpio chips are always labeled the same; this allows simplifying
any arch setup gpio lookups.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44846
 2015-03-16 13:37:38 +00:00
Jonas Gorski
81e51681e7 brcm63xx: switch to 3.18 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44841
 2015-03-16 11:53:22 +00:00
Jonas Gorski
5d0e2d1b41 brcm63xx: call brcm63xx_detect explicitly 
Now that we have converted all users of global variables to use
brcm63xx_board_name, we can savely convert the implicit call to detect
in brcm63xx.sh to a single, explicit call in preinit.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44840
 2015-03-16 11:53:14 +00:00
Jonas Gorski
020e5733f9 brcm63xx: move preinit ifname detection to the preinit script 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44839
 2015-03-16 11:53:06 +00:00
Jonas Gorski
90da308e3b brcm63xx: remove obsolete brcm63xx_has_reset_button 
r37000 made button kmods loaded from generic code, so we don't use
it anymore for deciding to load them.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44838
 2015-03-16 11:52:57 +00:00
Jonas Gorski
f0badcb769 brcm63xx: set status leds from within diag.sh 
Instead of setting them up on invocation of brcm63xx_detect, set them
when calling diag.sh based.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44837
 2015-03-16 11:52:49 +00:00
Jonas Gorski
098377af25 brcm63xx: switch to board_name based configuration 
Board IDs are not unique, so in preparation for depricating them, always
use board_name for any (default) configuration decisions.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44836
 2015-03-16 11:52:42 +00:00
Jonas Gorski
52ffc6faa7 brcm63xx: add missing board_ids to legacy_detect 
These boards do not have a corresponding dts file yet.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44835
 2015-03-16 11:52:35 +00:00
Jonas Gorski
906c9ef952 brcm63xx: add device tree based board detection 
Use the device tree model property for detecting the board instead
of board id from nvram if present.

Since we can now directly detect the DVA-G3810BN, we can remove the
extra check for it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44834
 2015-03-16 11:52:26 +00:00
Jonas Gorski
844e92e188 brcm63xx: populate /tmp/sysinfo 
Take full board name from devicetree, if present. Provide a method
for retrieving the board name.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44833
 2015-03-16 11:52:20 +00:00
Jonas Gorski
9c53e344c0 brcm63xx: base-files: rename board_name to board_id 
Rename board_name to board_id to prepare for using board_name as a
proper name for the board.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44832
 2015-03-16 11:52:16 +00:00
Jonas Gorski
ca7f6d28c8 brcm63xx: Add DGND3700 v1 / DGND3800B support 
This adds support for the Netgear DGND3700 v1 and DGND3800B.

DGND3700 v1 and DGND3800B are exactly the same router, only one difference,
the factory firmware. This patch produces two factory firmwares for each router.

The router includes an onboard NAND flash for extra storage. NAND is currently
not supported in bcm63xx, so no code added for this part. The NOR flash (32MB)
is enough for storing an openwrt firmware.

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: Add back commit message from v1]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44831
 2015-03-16 11:52:10 +00:00
John Crispin
4fdb66373f netlogic: bump to 3.18 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44829
 2015-03-16 10:58:43 +00:00
Felix Fietkau
298d67ec7b mvebu: drop linux 3.14 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44828
 2015-03-16 08:29:42 +00:00
John Crispin
d6b3eba475 kernel: add missing MTD_SPLIT_FIT_FW symbol 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44827
 2015-03-16 08:05:42 +00:00
John Crispin
c0a15a57bd sunxi: drop 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44824
 2015-03-16 07:41:24 +00:00
John Crispin
eb396d6569 adm5120: drop 3.8 and 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44823
 2015-03-16 07:41:19 +00:00
John Crispin
46f01fec7f ar7: drop 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44822
 2015-03-16 07:41:10 +00:00
John Crispin
4d11bb0d23 ixp4xx: drop 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44821
 2015-03-16 07:41:05 +00:00
John Crispin
cc8b6c6d5b octeon: drop 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44820
 2015-03-16 07:40:59 +00:00
John Crispin
a992489e4b oxnas: drop 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44819
 2015-03-16 07:40:54 +00:00
John Crispin
fe33c185bd mpc85xx: drop 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44818
 2015-03-16 07:40:47 +00:00
John Crispin
518d9fd2a0 cns3xxx: drop 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44817
 2015-03-16 07:40:41 +00:00