KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
19225 commits 3 branches 0 tags 154 MiB
Commit graph

7549 commits

Author SHA1 Message Date
Gabor Juhos
72019009c7 ar71xx: fix network configuration for the TL-WA901N/ND boards 
SVN-Revision: 29654
 2012-01-04 17:30:52 +00:00
Gabor Juhos
90bfef9ec9 ar71xx: allow to use LAN LED on the TL-WA901N/ND boards 
SVN-Revision: 29653
 2012-01-04 17:30:50 +00:00
Gabor Juhos
5eb502d9c1 ar71xx: add default LED configuration for the TL-MR3020 
Also use the system LED for diagnostic.

SVN-Revision: 29652
 2012-01-04 17:30:49 +00:00
Gabor Juhos
1045c83527 ar71xx: add support for TP-Link TL-MR3020 
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29651
 2012-01-04 17:30:47 +00:00
Gabor Juhos
88223f87d1 ar71xx: use the new om-watchdog package for OM2P 
Signed-off-by: Antonio Quartulli <ordex@autistici.org>

SVN-Revision: 29648
 2012-01-04 17:30:41 +00:00
Jo-Philipp Wich
a788f199c9 remove current RTSP support 
SVN-Revision: 29643
 2012-01-04 00:29:29 +00:00
Jo-Philipp Wich
237282ae8c backport upstream commit e1738bd9cecc5c867b0e2996470c1ff20f66ba79 to affected kernels (#9802) commit 8efa88540635 (sch_sfq: avoid giving spurious NET_XMIT_CN signals) forgot to call qdisc_tree_decrease_qlen() to signal upper levels that a packet (from another flow) was dropped, leading to various problems. 
SVN-Revision: 29642
 2012-01-03 23:08:15 +00:00
Gabor Juhos
8854c90119 ar71xx: add profile and build factory image for the Hornet-UB board 
SVN-Revision: 29637
 2012-01-01 19:30:29 +00:00
Gabor Juhos
1d3de89f3c ar71xx: build images for the ALFA Network N2/N5 boards 
SVN-Revision: 29636
 2012-01-01 19:30:28 +00:00
Gabor Juhos
1e68f10b87 ar71xx: add support for the ALFA Network N2/N5 boards 
SVN-Revision: 29635
 2012-01-01 19:30:25 +00:00
Gabor Juhos
5c067db8a7 ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards 
SVN-Revision: 29631
 2011-12-31 15:02:46 +00:00
Gabor Juhos
fff02e6ea8 ar71xx: enable SWCONFIG_LEDS 
SVN-Revision: 29630
 2011-12-31 15:02:40 +00:00
Gabor Juhos
5fa65cba6e kernel: swconfig: introduce a generic switch LED trigger 
SVN-Revision: 29627
 2011-12-31 15:02:30 +00:00
Gabor Juhos
8c2482f76e ar71xx: ag71xx: implement get_port_{link,stats} callbacks 
SVN-Revision: 29626
 2011-12-31 15:02:26 +00:00
Gabor Juhos
975355a2b1 kernel: swconfig: add get_port_{link,stats} callbacks 
SVN-Revision: 29625
 2011-12-31 15:02:24 +00:00
Gabor Juhos
557009bbdb ar71xx: fix LEDs on the WRT400N 
SVN-Revision: 29624
 2011-12-31 13:54:11 +00:00
Gabor Juhos
244c322d25 ramips: rt288x: add support for the Belkin F5D8235-4 v1 board 
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29617
 2011-12-28 08:43:43 +00:00
Gabor Juhos
f50b02b559 ramips: rt288x: change base address and window size of flash bank 0 
SVN-Revision: 29616
 2011-12-28 08:43:36 +00:00
Gabor Juhos
98437278c4 ramips: rt305x: add support for the ALFA Networks W502U (R36) board 
SVN-Revision: 29615
 2011-12-28 08:43:32 +00:00
Gabor Juhos
76dacee995 ar71xx: enable sysupgrade support for airrouter 
Works for me! ;-)

Patch-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 29614
 2011-12-27 16:59:43 +00:00
Gabor Juhos
c6ee919b2a ar71xx: fix sysupgrade on PB42/PB44 boards 
SVN-Revision: 29613
 2011-12-27 16:57:01 +00:00
Gabor Juhos
723d8dd74f ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board 
SVN-Revision: 29612
 2011-12-27 16:56:30 +00:00
Jo-Philipp Wich
9fa33ceee2 add missing config symbol 
SVN-Revision: 29610
 2011-12-25 13:33:18 +00:00
Hauke Mehrtens
11125d68ed brcm47xx: fix usb on more recent bcma based devices. 
SVN-Revision: 29605
 2011-12-23 17:21:52 +00:00
Gabor Juhos
7b1e525b56 ramips: initial support for Sitecom WL-351 v1 002 
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.

Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.

With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.

The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated

But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 29604
 2011-12-23 14:27:16 +00:00
Gabor Juhos
2cb946f5b4 ramips: add support for the Senao/EnGenius ESR-9753 board 
Signed-off-by: Artur Wronowski <arteqw@gmail.com>

SVN-Revision: 29603
 2011-12-23 14:27:10 +00:00
Gabor Juhos
03bce34384 ramips: define firmware partition for Omnima MiniEMBWiFi 
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>

SVN-Revision: 29602
 2011-12-23 14:27:05 +00:00
Felix Fietkau
db0a1db257 ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547) 
SVN-Revision: 29598
 2011-12-22 05:43:53 +00:00
Jonas Gorski
8799627ef0 ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H 
Thanks netprince for reporting and testing.

SVN-Revision: 29595
 2011-12-21 19:32:40 +00:00
Jo-Philipp Wich
ebefe1eb3a the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649) 
SVN-Revision: 29593
 2011-12-21 01:27:48 +00:00
Hauke Mehrtens
0cd03df3b1 brcm47xx: remove patch starting adding brcm4716 to ssb 
brcm4716 is supported by bcma now we do not need this patch

SVN-Revision: 29576
 2011-12-19 23:55:20 +00:00
Hauke Mehrtens
5b8686c303 brcm47xx: add new usb driver for bcma bus and replace ssb usb driver. 
This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more.

SVN-Revision: 29575
 2011-12-19 23:39:13 +00:00
Hauke Mehrtens
1aa5a61754 kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing 
SVN-Revision: 29574
 2011-12-19 23:33:03 +00:00
Hauke Mehrtens
91d0ef6f19 brcm47xx: remove support for kernel 2.6.39 
There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches.

SVN-Revision: 29573
 2011-12-19 23:26:15 +00:00
Felix Fietkau
11013ad947 ar71xx: add missing wireless led changes for wzr-hp-g300nh2 
SVN-Revision: 29568
 2011-12-19 09:04:15 +00:00
Felix Fietkau
0cc056cb7e ar71xx: add support for the wzr-hp-g300nh2 
Signed-off-by: Mark Deneen <mdeneen@gmail.com>

SVN-Revision: 29567
 2011-12-18 22:20:17 +00:00
Gabor Juhos
5a0a2b2f1b ar71xx: use 64kraw template on more TP-Link boards 
SVN-Revision: 29561
 2011-12-17 18:49:55 +00:00
Gabor Juhos
67c7980290 ar71xx: connect GMAC0 to the internal switch on DB120 
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.

SVN-Revision: 29557
 2011-12-15 22:25:38 +00:00
Gabor Juhos
5bbd416e38 ar71xx: add defines for the AR934X GMAC interface 
SVN-Revision: 29556
 2011-12-15 22:25:36 +00:00
Gabor Juhos
e47a8c2bb2 ar71xx: fix GMAC1 interface speed on the DB120 board 
SVN-Revision: 29555
 2011-12-15 22:25:35 +00:00
Gabor Juhos
36bc2c2c80 ar71xx: ag71xx: fix switch port setup for AR934X 
SVN-Revision: 29554
 2011-12-15 22:25:32 +00:00
Gabor Juhos
00667c3846 ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X 
SVN-Revision: 29553
 2011-12-15 22:25:30 +00:00
Gabor Juhos
0540970345 ar71xx: ag71xx: setup switch interface mode on AR934X 
SVN-Revision: 29552
 2011-12-15 22:25:29 +00:00
Gabor Juhos
44014110b8 ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs 
SVN-Revision: 29551
 2011-12-15 22:25:28 +00:00
Gabor Juhos
e2a546d475 ar71xx: allow to attach the internal switch for AR934x 
SVN-Revision: 29550
 2011-12-15 22:25:22 +00:00
Gabor Juhos
9ae65588d8 ar71xx: introduce ar71xx_switch_data 
SVN-Revision: 29549
 2011-12-15 22:25:11 +00:00
Gabor Juhos
bfe747b7d9 ar71xx: build images for TL-WR741N/ND v2 
SVN-Revision: 29548
 2011-12-15 22:03:48 +00:00
Gabor Juhos
aefff26624 ar71x: use raw squashfs images for TP-Link boards 
SVN-Revision: 29547
 2011-12-15 22:03:46 +00:00
Gabor Juhos
d5bd28ffae ar71xx: create a template for using unpadded squashfs images 
SVN-Revision: 29546
 2011-12-15 22:03:45 +00:00
Gabor Juhos
dbc4fa4b5b ar71xx: put squash image right after the kernel on TP-Link boards 
SVN-Revision: 29545
 2011-12-15 22:03:44 +00:00