Commit graph

1611 commits

Author SHA1 Message Date
Luka Perkov
d81a8ad523 kernel: update 3.14 to 3.14.32
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44302
2015-02-07 17:48:33 +00:00
Imre Kaloz
b361a9d59a generic: allow ubi autoattach to run on NOR flash
Some devices out there only have a NOR flash to store the rootfs on.

While using UBI is arguable on this kind of flash, this is something that should
be supported.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44260
2015-02-05 11:21:31 +00:00
John Crispin
baaef42952 ar71xx: Revert "added board support for compex wpj558"
This reverts commit f7873071561d82e75ba2dc46433a2982fef8ac6f.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44245
2015-02-02 10:32:04 +00:00
John Crispin
bc906ca59e added board support for compex wpj558
Signed-off-by: Christian Mehlis <christian@m3hlis.de>

SVN-Revision: 44237
2015-02-02 09:00:21 +00:00
Rafał Miłecki
4dd3c05af2 kernel: disable bcma's usage of OF API in kernel 3.10
It fails to build because of missing of_irq_parse_raw and incompatible
irq_create_of_mapping.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44230
2015-01-31 16:43:13 +00:00
Jo-Philipp Wich
9d7651b528 linux: fix mips boot decompressor build
Replace the now defunct 062-mips_decompressor_build_fix.patch with another
patch that simply undefines the arch memset and memcpy defines to avoid
syntax errors in the redeclaration.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44223
2015-01-30 10:04:23 +00:00
John Crispin
31fd66f808 ar71xx: add Netgear WNR1000v2/WNR1000v2-VC support (#18633)
The board is already supported by OpenWrt. WNR1000v2/WNR1000v2-VC are
pretty much the same as WNR2000v3/WNR612v2, therefore the same
initialization code and flash layout is used.

Signed-off-by: Ștefan Rusu <saltwaterc@gmail.com>
Tested-by: Douglas Fraser <1dsfraser@gmail.com>

SVN-Revision: 44221
2015-01-30 08:06:40 +00:00
Rafał Miłecki
5ecce85db7 kernel: bcm47xxpart: support T_Meter partitions
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44185
2015-01-28 21:26:31 +00:00
Jo-Philipp Wich
e25e6df2cf linux: add upstream patch to allow building dwc2 as module on 3.18
Also add the required config symbols to usb.mk

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44181
2015-01-28 13:45:06 +00:00
John Crispin
dcac85d7d8 kernel: add LZ4 decompressors to kconfig hack
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 44168
2015-01-28 12:06:35 +00:00
Luka Perkov
a9568263f6 kernel: update 3.14 to 3.14.30
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44158
2015-01-28 01:00:08 +00:00
Rafał Miłecki
3579379dba kernel: bcm47xxpart: support boart_data partition on Xiaomi
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44157
2015-01-27 22:13:18 +00:00
Rafał Miłecki
6296b8ca9f kernel: backport queued bcm47xxpart changes
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44156
2015-01-27 22:08:14 +00:00
Jo-Philipp Wich
3483c76084 kernel: add missing symbol to generic 3.18 config
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44150
2015-01-25 23:36:09 +00:00
Imre Kaloz
11a2a6b220 generic/3.19: fixup the value of IFF_NO_IP_ALIGN
Reported-by: Stephen Walker <stephendwalker+openwrt@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44139
2015-01-25 18:14:18 +00:00
Luka Perkov
ee3eade285 kernel: update 3.14 to 3.14.29
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44137
2015-01-25 17:29:41 +00:00
Jo-Philipp Wich
08dad3f429 xburst: fix kernel build
Changeset r43049 removed the "062-mips_decompressor_build_fix.patch" which is
still required to properly build the xburst kernel.

Fix the syntax error in the preprocessed code by explicitely undefining the
"memcpy" and "memset" macros prior to declaring the replacements functions.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44133
2015-01-25 15:55:03 +00:00
Imre Kaloz
d26694243a generic: add preliminary 3.19 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44126
2015-01-25 15:20:39 +00:00
Imre Kaloz
53c7248554 generic/3.18: update to 3.18.3
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44121
2015-01-25 11:39:30 +00:00
Felix Fietkau
186db26d05 kernel: remove linux 3.3 patches and config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44109
2015-01-24 20:02:02 +00:00
Felix Fietkau
f7ece95303 ar8216: prefix mii_xxx functions to avoid kernel namespace pollution
Prefix the exported mii_xxx32 functions with ar8xxx_
to avoid kernel namespace pollution.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44105
2015-01-24 19:42:12 +00:00
Felix Fietkau
3a313a3e11 ar8216: add swconfig attribute to display ARL table on AR8327/AR8337
Add global read-only swconfig attribute "arl_table" to display the
address resolution table.
So far the chip-specific part is implemented for AR8327/AR8337 only
as I don't have the datasheets for the other AR8XXX chips.

Successfully tested on TL-WDR4300 (AR8327rev2)
and TL-WDR4900 (AR8327rev4).

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44104
2015-01-24 19:42:06 +00:00
Felix Fietkau
6ce848f622 ar8216: decrease page switch wait time
Until a few years ago the page switch wait time was set to msleep(1)
what was changed to usleep_range(1000, 2000) later.

I can not imagine that a low-level operation like switching page
on register level takes so much time.
Most likely the value of 1ms was initially set to check whether
it fixes an issue and then remained w/o further checking whether
also a smaller value would be sufficient.

Now the wait time is set to 5us and I successfully tested this on
AR8327. IMHO 5us should be plenty of time for all supported chips.
However I couldn't test this due to missing hardware.

If other chips should need a longer wait time we can add the
wait time as a parameter to the ar8xxx_chip struct.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44103
2015-01-24 19:42:01 +00:00
Felix Fietkau
a1fba9dfbe ar8216: add link change detection for switch ports
Check for switch port link changes and
- flush ATU in case of a change
- report link change via syslog

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44102
2015-01-24 19:41:55 +00:00
Felix Fietkau
74146c62c0 ar8216: fix ATU flushing
The functionality to flush the address translation table contains two bugs
which luckily compensate each other.
1. Just setting the operation is not sufficient to perform the flushing.
   The "active" bit needs to be set to actually trigger an action.
   For the vtu operations this is implemented correctly.
2. ar8xxx_phy_read_status is called every 2s by the phy state machine
   to check for link changes. This would have caused an ATU flush
   every 2s.

Fix the chip-specific ATU flush functions and remove the ATU flush call
from ar8xxx_phy_read_status.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44101
2015-01-24 19:41:51 +00:00
Zoltan Herpai
91260ad6ef kernel: add missing config symbol for 3.18
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 44034
2015-01-18 14:28:13 +00:00
John Crispin
90ef62c78f kernel: preserve bootloader command line on MIPS
Somewhere in the conversion of the MIPS architecture code to Device Tree
usage, there's been a failure to keep the separate variables holding the
kernel command line reconciled between the tree and the bootloader. This
patch restores previous functionality that broke.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 44030
2015-01-18 09:40:53 +00:00
Felix Fietkau
a0849e6439 kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44026
2015-01-18 09:25:38 +00:00
Felix Fietkau
216100edb4 kernel: backport upstream commit to fix MIPS cache shift with secondary cache enabled
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44024
2015-01-18 09:25:27 +00:00
Felix Fietkau
6dfea16ab9 ar8216: display flow control info in swconfig get_link in case of autonegatiation too
The swconfig get_link attribute (at least) on AR8327/AR8337 doesn't
consider the autonegotiated flow control.
AR8327/AR8337 provide the info about autonegotiated rx/tx flow control
in bits 10 and 11 of the port status register.
Use these values to display info about autonegotiated rx/tx flow
control as part of the get_link attribute.

Successfully tested on TL-WDR4900 (AR8327 rev.4) and
TL-WDR4300 (AR8327 rev.2).

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44023
2015-01-18 00:54:06 +00:00
Felix Fietkau
53c0c6054f ar8216: add 802.3az EEE info to swconfig get_link attribute
AR8327/AR8337 allow to read the result of EEE autonegotiation.
If EEE is autonegotiated between the link partners, display
this as part of the swconfig get_link attribute.

eee100:  100MBit EEE supported by both link partners
eee1000: 1GBit EEE supported by both link partners

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44022
2015-01-18 00:53:59 +00:00
Felix Fietkau
bdc0750191 ar8216: introduce enable_eee swconfig attribute to control 802.3az EEE per port
Users reported network issues with AR8327 which turned out to be caused
by EEE not working correctly with certain link partners (ticket 14597).
The workaround was to disable EEE on all ports (changeset 41577).

The issue was with certain link partners only, therefore this patch
allows to control usage of EEE per port via swconfig.
Still the default is to initially disable EEE on all ports.

Successfully tested on a TL-WDR4900 (AR8327 rev.4)

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44021
2015-01-18 00:53:53 +00:00
John Crispin
64ccdb98fb ar8216: introduce ar8xxx_reg_clear complementing ar8xxx_reg_set
Introduce ar8xxx_reg_clear complementing ar8xxx_reg_set.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44004
2015-01-17 14:24:56 +00:00
John Crispin
0fb39e6f4b ar8216: replace ar8xxx_rmw with ar8xxx_reg_set where appropriate
Replace ar8xxx_rmw with ar8xxx_reg_set where appropriate.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44003
2015-01-17 14:24:47 +00:00
John Crispin
1cb2596f19 ar8216: define all switch_addr structs as const
Define all switch_addr structs as const.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44002
2015-01-17 14:24:40 +00:00
Felix Fietkau
4f2fe5d7fa kernel: fix disable_irq() on MIPS CPU IRQs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43973
2015-01-15 12:19:12 +00:00
Luka Perkov
9db3df9d6b mvsw61xx: track and set per-VLAN port state in STU
Since the driver doesn't know anything about (M)STP
we just hard-set the ports to be enabled if they are
part of the VLAN.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43938
2015-01-11 17:20:16 +00:00
Luka Perkov
0b2cbeca7a mvsw61xx: clean up and expand register definitions
- eliminate MV_CPUPORT; not necessary since we define
  the CPU port(s) via Device Tree

- add STU and expand VTU operations

- update register names to match those of 88E61xx rather than
  mvswitch's 88E6060

- use more consistent formatting

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43937
2015-01-11 17:20:06 +00:00
Luka Perkov
1e39f3aef8 mvsw61xx: rework chip recognition
Recognizes 88E6171/6172/6176 at the moment.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43936
2015-01-11 17:20:03 +00:00
Luka Perkov
a1872182bb mvsw6171: rename to 'mvsw61xx'
In preparation for properly supporting switches
beyond the 88E6171.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43935
2015-01-11 17:19:58 +00:00
Luka Perkov
b78cddafcc kernel: update 3.14 to 3.14.28
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43929
2015-01-11 01:28:32 +00:00
Zoltan Herpai
3db73fc350 kernel: add missing config symbols for 3.18
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43912
2015-01-10 17:23:55 +00:00
Imre Kaloz
182bbf60b7 upgrade to 3.18.2
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43892
2015-01-09 12:35:19 +00:00
John Crispin
baad87ae3d kernel: add SECCOMP to menuconfig
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43888
2015-01-08 21:23:18 +00:00
Felix Fietkau
1cbf0fbcb4 ar8216: factor out AR8327/AR8337-specific driver code into ar8327.c
Move all AR8327/AR8337-specific driver code into a separate source file
ar8327.c and adjust patches so that ar8327.c is compiled if
CONFIG_AR8216_PHY is set.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43845
2015-01-05 13:03:07 +00:00
Felix Fietkau
cc02d4c72d ar8216: move definitions from ar8216.c to ar8216.h and introduce ar8327.h
Move several structure definitions and #defines from ar8216.c
to ar8216.h and move AR8327/AR8337 header stuff into a new
header file ar8327.h.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43844
2015-01-05 13:02:57 +00:00
Felix Fietkau
7cc5b6f9e9 all targets: remove all =m kernel config symbols
modules build during the kernel compile phase are ignored anyway,
all modules should be built using KernelPackage in
package/kernel/linux/modules/*
selecting the appropriate config symbols there rather than in
target/linux/*/config-*

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43842
2015-01-05 13:02:44 +00:00
Felix Fietkau
2b9379052e kernel: bridge: multicast: backport a few more fixes for 3.10
The following patches unfortunately didn't hit the kernel stable
branches yet, therefore cherrypicking them for OpenWRT here:

* bridge: fix netfilter/NF_BR_LOCAL_OUT for own, locally generated queries
* bridge: multicast: enable snooping on general queries only
* bridge: multicast: add sanity check for general query destination

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>

SVN-Revision: 43841
2015-01-05 13:02:31 +00:00
Luka Perkov
deb35ad4ac kernel: update 3.18 to 3.18.1
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43821
2015-01-03 22:59:47 +00:00
Luka Perkov
9c8422a09b kernel: update 3.14 to 3.14.27
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43820
2015-01-03 22:59:43 +00:00