openwrtv4

Author	SHA1	Message	Date
Florian Fainelli	47ccbaaa91	remove frequency from /proc/cpuinfo This is not the place to expose it and duplicates code reading the system frequency. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34551	2012-12-06 22:39:57 +00:00
Florian Fainelli	e37f6fb458	provide a system clock to be used by the MIPS timer Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34550	2012-12-06 22:39:52 +00:00
Florian Fainelli	79c2ce01b7	get rid of the UART defines Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34549	2012-12-06 22:39:47 +00:00
Florian Fainelli	afc2b07be1	get rid of the specific UART driver and use AMBA PL010 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34548	2012-12-06 22:39:43 +00:00
Florian Fainelli	2dee2133c5	implement early_printk without an early_console Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34547	2012-12-06 22:39:33 +00:00
Florian Fainelli	f85115efd8	simplify IRQ controller code Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34546	2012-12-06 22:39:27 +00:00
Florian Fainelli	50303d52e2	use platform_add_devices Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34545	2012-12-06 22:39:22 +00:00
Florian Fainelli	192c1e90bc	move time related functions to their own file Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34544	2012-12-06 22:39:18 +00:00
Florian Fainelli	1f939889ca	move setup-related functions to their own file Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34543	2012-12-06 22:39:08 +00:00
Felix Fietkau	abc03de599	kernel: add missing config symbols SVN-Revision: 34532	2012-12-06 14:11:16 +00:00
Felix Fietkau	a3843e7ec7	kernel 3.6+: nuke obsolete patches that are messing up oprofile builds SVN-Revision: 34506	2012-12-05 16:49:48 +00:00
Florian Fainelli	512baafc6b	kernel/3.3: move OHCI and EHCI platform drivers to generic These patches are not specific to bcm47xx and will be used on other platforms as well. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34501	2012-12-05 14:18:05 +00:00
Florian Fainelli	822ee5053e	cns3xxx: fix dwc_otg driver compat with udc-core function. This removes those from the dwc_otg driver and removes the patch that comments out the linkage of udc-core so that the dwc_otg driver can co-exist happily with other USB Device Controllers. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34475	2012-12-04 16:19:18 +00:00
Florian Fainelli	fd0729f35c	cns3xxx: advertise pcie usb usbgadget features Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34474	2012-12-04 16:19:12 +00:00
Florian Fainelli	d9d0814fc2	Fix Comtrend AR-5381u Power LED Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34471	2012-12-04 15:19:50 +00:00
Florian Fainelli	d3cda51994	do no longer rename amba-pl010 serial devices names Back in the days when we could not override /etc/inittab, it made a lot of sense to rename ttyAM to ttyS since this was the only supported serial device(s), we can now just put in an appropriate /etc/inittab file now. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34469	2012-12-03 16:18:40 +00:00
Felix Fietkau	a7220cd9f8	kernel: disable more pci quirks to save space on platforms that don't need them SVN-Revision: 34467	2012-12-03 10:33:47 +00:00
Felix Fietkau	ec885796c0	kernel 3.6+: switch to a crc32 implementation that is more suitable for small caches. reduces kernel image size by ~22 KiB on mips SVN-Revision: 34461	2012-12-02 18:37:41 +00:00
Felix Fietkau	24b31c9428	kernel: fix stripping symbol exports SVN-Revision: 34458	2012-12-02 17:42:17 +00:00
Hauke Mehrtens	2ac9ac5163	brcm47xx: read sprom vars without prefix for boardrev and boardtype if the prefixed one is not available. SVN-Revision: 34454	2012-12-02 16:11:39 +00:00
Felix Fietkau	38d3b8d0ea	kernel: patch in a working copy of elf.h instead of using relative path based hackery in #include statements SVN-Revision: 34449	2012-12-02 15:26:19 +00:00
Gabor Juhos	e0e43655ce	ramips: fix serial console for Belkin F5D8235 v1/v2 Based on a patch from #12533. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34445	2012-12-02 14:16:12 +00:00
Gabor Juhos	890f83dfb3	Update linux-atm fixes to reflect the final upstream pull request [juhosg: refresh the patches with quilt] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34443	2012-12-02 13:04:04 +00:00
Jo-Philipp Wich	476ea2bcb4	imagebuilder: use file_copy to deploy files/ in the image generation phase SVN-Revision: 34439	2012-12-02 12:20:43 +00:00
Florian Fainelli	4a1e2123eb	kernel: remove references to TARGET_ubicom32 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34431	2012-11-30 10:53:51 +00:00
Florian Fainelli	527afd0e9a	remove target This target is unused, does not support any off the shelf hardware and has been a maintenance burden for quite some time now. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34430	2012-11-30 10:53:47 +00:00
Florian Fainelli	c830644d97	remove Linux 3.3 support Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34426	2012-11-29 21:43:02 +00:00
Florian Fainelli	763f780553	use a default kernel command-line to mount squashfs and jffs2 This fixes bug #9055. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34424	2012-11-29 21:42:53 +00:00
Gabor Juhos	7cde0281f4	kernel: Fix 8139cp ring buffer initialisation, tx timeout recovery, add BQL Patches queued upstream in net-next.git Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34415	2012-11-29 17:58:28 +00:00
Gabor Juhos	4f5defdc3b	ar71xx: switch to 3.6.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34414	2012-11-29 17:53:42 +00:00
Gabor Juhos	ea17e36482	kernel: Update Geos to 3.6.8 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34411	2012-11-29 17:37:19 +00:00
Gabor Juhos	543c2c27d1	kernel: Add ATM fixes pending upstream merge (queue reduction, race fixes) Patches about to go into net-next.git Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34410	2012-11-29 17:37:18 +00:00
Gabor Juhos	df6727639a	kernel: Add missing CONFIG_BATTERY_DS2781 option to generic 3.6 config Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34409	2012-11-29 17:37:16 +00:00
Gabor Juhos	44131bd785	ramips: rt305x: add profile and build image for the Asus RT-N13U Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34407	2012-11-29 17:37:14 +00:00
Gabor Juhos	d3994b7408	ramips: rt305x: add user-space support for the Asus RT-N13U Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34406	2012-11-29 17:37:13 +00:00
Gabor Juhos	0ec59e6235	ramips: rt305x: add kernel support for the Asus RT-N13U Wireless-N300 Router The work has been backported from openwrt-dreambox with some modifications & code cleanup. * updated config-3.3 * updated config-3.6 * renamed rt-n13 to rt-n13u * fixed mach-rt-n13u.c [juhosg: move user-space support and image generation into separate patches] Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34405	2012-11-29 17:37:11 +00:00
Gabor Juhos	c2f018fca2	remove common symbols from 3.6 configs The removed symbols are present in the generic configuration. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34404	2012-11-29 15:21:41 +00:00
Gabor Juhos	1f516235ea	remove common symbols from 3.3 configs The removed symbols are present in the generic configuration. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34403	2012-11-29 15:21:35 +00:00
Gabor Juhos	3a4d0ebd5c	kernel: update linux 3.6 to 3.6.8 Also refresh the affected patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34402	2012-11-29 07:42:19 +00:00
Florian Fainelli	ee16e144bb	use physmap-flash part_probe_types Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34398	2012-11-27 18:42:49 +00:00
Florian Fainelli	0588d13a3e	Fix typo in 96338GW power LED. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34396	2012-11-27 18:42:42 +00:00
Florian Fainelli	dd852e242d	add AudioCodes AC495 SoC Found in the AudioCodes Tulip AC494 ATA. Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34395	2012-11-27 18:42:39 +00:00
Florian Fainelli	d59ba20030	do not call clk_put() on the timer clock We don't support disabling the clock, but this is actually what it would do. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34394	2012-11-27 18:42:36 +00:00
Florian Fainelli	5d6208f34d	do not list specific board compatible strings The general practice is to use the general SoC compatible string in both the DTS and the board specific .c file. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34393	2012-11-27 18:42:32 +00:00
Florian Fainelli	94b7be6dd7	remove unused variables from Makefile.boot Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34392	2012-11-27 18:42:28 +00:00
Hauke Mehrtens	efd00e6240	brcm47xx: fix title of Bcm4705-wl profile SVN-Revision: 34378	2012-11-25 16:41:00 +00:00
Hauke Mehrtens	a3d976aff5	brcm47xx: add profile for bcm4705 with wl driver SVN-Revision: 34336	2012-11-25 16:15:27 +00:00
Gabor Juhos	57b7879a4e	ramips: ramips_eth: use Kconfig definition to enable debug The Kconfig identifier to enable debugging in the driver was different from the actually used one. Fix that. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34332	2012-11-25 14:25:54 +00:00
Gabor Juhos	21d5df8700	ramips: add DIR-615 D userspace support Commit 7c8edac25f23c4fc14239fdc293caa1317649944 introduced new machine and Makefile changes to build images for this target. However, without the userspace bits a ramips machine can't use wifi as the necessary "eeprom" data is to be extracted by a hotplug script; also, sysupgrade support and default led configuration are missing. An IRC user reported these changes allowed him to use wifi on his hardware. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34331	2012-11-25 14:25:27 +00:00
Hauke Mehrtens	608efcdbd0	kernel: add CONFIG_BCMA_POSSIBLE=y to generic config as it is set in most of the target configs. SVN-Revision: 34330	2012-11-25 14:14:17 +00:00
Hauke Mehrtens	aa8e887a46	brcm47xx: whitespace cleanups SVN-Revision: 34329	2012-11-25 14:03:51 +00:00
Hauke Mehrtens	be77f9951c	brcm47xx: fix cpu clock detection on ASUS WL-520gU The ASUS WL-520gU and some other similar Asus devices have a BCM5354 running at 200MHZ and not at 240 which is the default for this SoC. This fixes #4083. SVN-Revision: 34325	2012-11-24 20:28:06 +00:00
Hauke Mehrtens	264873b3c5	brcm47xx: watchdog: deactivate NOWAYOUT. In the old configuration the SoC issued a reboot if the watchdog was killed also if it was kill with TERM and not KILL. This will fix #11724. SVN-Revision: 34324	2012-11-24 20:24:27 +00:00
Hauke Mehrtens	c62d86ecb8	brcm47xx: update watchdog driver This watchdog driver should work with SoC having a PMU. This fixes #11720. SVN-Revision: 34323	2012-11-24 20:07:25 +00:00
Jonas Gorski	60e0e0d6e6	bcm63xx: Add a fixup for rt2x00 devices. This patch adds support for defining rt2x00 eeprom data. This eeprom data can be extracted from flash or loaded directly from a firmware file. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 34322	2012-11-24 14:19:22 +00:00
Jonas Gorski	746b4cec06	bcm63xx: Enable LED pin support for ath9k pci fixup. Some boards need specifying LED pin in order to get it working. For example, in board HW556 (Huawei HG556a) "led_pin" must be "2". By default led_pin is "0", so dsl_274xb_rev_f is changed to "-1". Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 34321	2012-11-24 14:19:16 +00:00
Jonas Gorski	1baeede939	bcm63xx: fix spi transfer handling * Accept transfers without bits_per_word set. * Work around the inability of the hardware of keeping CS asserted. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 34320	2012-11-24 14:19:09 +00:00
Gabor Juhos	b0b994cf76	ar71xx: set pad6 cfg for AR8327 on the AP136 board Also override the pll_1000 value. Without these settings ethernet suffers from packet loss. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34316	2012-11-23 20:55:34 +00:00
Gabor Juhos	49d4b5581d	generic: ar8216: set delay values for SGMII mode on AR8327 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34315	2012-11-23 20:55:26 +00:00
Florian Fainelli	6b63716262	add preliminary support for musl Musl is an alternative C-library, see http://www.musl-libc.org for more infos. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34314	2012-11-23 20:02:29 +00:00
Jo-Philipp Wich	b73f22de1e	imagebuilder: merge r25078 to align files/ handling with current buildroot SVN-Revision: 34301	2012-11-22 19:46:54 +00:00
Gabor Juhos	3205b52d1c	generic: ar8216: introduce ar8216_mib_op helper The ar8216_mib_{capture,flush} functions are similar. Move the common code into a helper and use that from the original functions. This change also fixes a lockdep warning in ar8216_mib_flush. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34297	2012-11-22 10:33:03 +00:00
Gabor Juhos	10d30f2d2d	swconfig: make it compatible with 3.7 swconfig does not compile with 3.7 because struct netlink_notify->pid has been renamed to struct netlink_notify->portid and struct genl_info->snd_pid has been renamed to struct genl_info->snd_portid Use the new names and add compatibility patches to 3.3 and 3.6. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34288	2012-11-21 17:38:11 +00:00
John Crispin	f7ead0a2d5	adds proper package selection for dgn3500 SVN-Revision: 34286	2012-11-21 06:06:48 +00:00
Gabor Juhos	e20a0baa04	cns21xx: add support for 3.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34285	2012-11-20 21:37:53 +00:00
Gabor Juhos	5c740aa23c	generic: add some missing symbols for 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34284	2012-11-20 21:34:43 +00:00
Gabor Juhos	2a792f32b5	generic: ar8216: fix port number check in 'ar8xxx_mib_work_func' Also add a WARN_ON to 'ar8216_mib_fetch_port_stat' Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34283	2012-11-20 20:40:04 +00:00
Gabor Juhos	258b2f2dc2	generic: ar8216: remove an unblanced mutex_unlock call Fixes the following warning: [ 94.080000] [ 94.080000] ===================================== [ 94.080000] [ BUG: bad unlock balance detected! ] [ 94.080000] 3.3.8 #2 Tainted: G O [ 94.080000] ------------------------------------- [ 94.080000] swconfig/1220 is trying to release lock (&priv->mib_lock) at: [ 94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c [ 94.080000] but there are no more locks to release! [ 94.080000] [ 94.080000] other info that might help us debug this: [ 94.080000] 2 locks held by swconfig/1220: [ 94.080000] #0: (genl_mutex){+.+...}, at: [<80222430>] genl_rcv+0x14/0x34 [ 94.080000] #1: (&dev->sw_mutex){+.+...}, at: [<801da018>] swconfig_get_dev+0x88/0xb4 [ 94.080000] [ 94.080000] stack backtrace: [ 94.080000] Call Trace: [ 94.080000] [<8028dc58>] dump_stack+0x8/0x34 [ 94.080000] [<800a5128>] print_unlock_inbalance_bug+0xe0/0xfc [ 94.080000] [<800a82c0>] lock_release+0x18c/0x1c8 [ 94.080000] [<80292074>] __mutex_unlock_slowpath+0xd8/0x17c [ 94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c [ 94.080000] [<801db688>] swconfig_get_attr+0xbc/0x394 [ 94.080000] [<8022261c>] genl_rcv_msg+0x1cc/0x214 [ 94.080000] [<80221a18>] netlink_rcv_skb+0x6c/0xe8 [ 94.080000] [<80222440>] genl_rcv+0x24/0x34 [ 94.080000] [<80221370>] netlink_unicast+0x15c/0x22c [ 94.080000] [<8022175c>] netlink_sendmsg+0x240/0x2d0 [ 94.080000] [<801ef544>] sock_sendmsg+0x84/0x9c [ 94.080000] [<801f0648>] __sys_sendmsg+0x1cc/0x270 [ 94.080000] [<801f207c>] sys_sendmsg+0x48/0x7c [ 94.080000] [<8006ad78>] stack_done+0x20/0x40 [ 94.080000] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34282	2012-11-20 20:40:03 +00:00
Gabor Juhos	82b57b0c28	generic: ar8216: add missing locking calls Fixes the following lockdep warning: [ 19.160000] ------------[ cut here ]------------ [ 19.160000] WARNING: at drivers/net/phy/ar8216.c:322 ar8216_rmw+0x54/0xa4() [ 19.170000] Modules linked in: nf_defrag_ipv4 nf_conntrack ehci_hcd sd_mod pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multip ort xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) at h9k_hw(O) ath(O) mac80211(O) usbcore usb_common scsi_mod nls_base crc7 crc_itu_t crc_ccitt cfg80211(O) compat(O) arc4 aes_generic cry pto_blkcipher cryptomgr aead crypto_hash crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O) [ 19.210000] Call Trace: [ 19.220000] [<8028dc38>] dump_stack+0x8/0x34 [ 19.220000] [<80072da0>] warn_slowpath_common+0x78/0xa4 [ 19.230000] [<80072de4>] warn_slowpath_null+0x18/0x24 [ 19.230000] [<801de820>] ar8216_rmw+0x54/0xa4 [ 19.240000] [<801df460>] ar8216_mib_capture+0x70/0xd0 [ 19.240000] [<801df944>] ar8xxx_mib_work_func+0x34/0x98 [ 19.250000] [<80089a7c>] process_one_work+0x28c/0x460 [ 19.250000] [<8008a630>] worker_thread+0x22c/0x334 [ 19.260000] [<8008e544>] kthread+0x88/0x90 [ 19.260000] [<80065020>] kernel_thread_helper+0x10/0x18 [ 19.270000] [ 19.270000] ---[ end trace 22e9d696adfa6a08 ]--- Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34281	2012-11-20 20:40:00 +00:00
Gabor Juhos	c0f73ac607	generic: convert yaffs to use kuid_t and kgid_t on 3.6+ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34280	2012-11-20 17:45:24 +00:00
Gabor Juhos	188908e885	ar71xx: make rb750_nand driver compatible with 3.7 Also add compatibility patches for the currently supported kernels. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34279	2012-11-20 16:29:43 +00:00
Gabor Juhos	8194237789	ar71xx: make ar934x_nfc driver compatible with 3.7 Also add compatibility patches for the currently supported kernels. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34278	2012-11-20 16:29:42 +00:00
Gabor Juhos	4468fd7ae4	ar71xx: refresh rb4xx_nand patch Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34277	2012-11-20 15:53:17 +00:00
Gabor Juhos	46a3b818b9	ar71xx: remove buffer verification reference from rb4xx_nand.c It is a dead code. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34276	2012-11-20 14:40:22 +00:00
Gabor Juhos	674b91ce0e	ar71xx: fix GPIO function selection for AR934x Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34275	2012-11-20 14:27:17 +00:00
Gabor Juhos	d833ca527d	ar71xx: restore rb4xx kernel partition size to the original value The new lzma compressed elf kernel image fits into that, even on devices with large page NAND chips. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34274	2012-11-20 12:17:45 +00:00
Gabor Juhos	33a99ce46b	ar71xx: install lzma compressed elf kernel image from wget2nand Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34273	2012-11-20 12:17:44 +00:00
Gabor Juhos	68b5aa2fdf	ar71xx/image: provide lzma compressed elf kernel image This will be used on the RB4xx/RB7xx/RB2011 boards. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34272	2012-11-20 12:17:43 +00:00
Gabor Juhos	97867f8717	ar71xx/image: relink loader.elf image to LOADADDR This allows to load the resulting image directly from RouterBOOT. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34271	2012-11-20 12:17:41 +00:00
Gabor Juhos	dd092fd10c	ramips: set clk_is_20mhz for rt2x00 on RT3352/RT5350 Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34270	2012-11-20 07:19:10 +00:00
Gabor Juhos	6c1fbb2d5c	mac80211/rt2x00: add rf_vals for Rt3352 with Xtal=20MHz [juhosg: move ramips specific stuff into a followup patch] Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34269	2012-11-20 07:19:09 +00:00
Gabor Juhos	8e4cefc7f8	refresh all kernel configurations Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34267	2012-11-20 07:19:06 +00:00
Jonas Gorski	8dc72c5c4d	Revert "target specific patches have nothing to do in generic.." This reverts commit r34230, as it is causing build failures: make[3] -C package/mtd compile imagetag.c:35:32: fatal error: linux/bcm963xx_tag.h: No such file or directory compilation terminated. make[4]: *** [imagetag.o] Error 1 Any patches modifying exported kernel headers need to reside in generic as toolchain/kernel-headers only applies generic patches. SVN-Revision: 34255	2012-11-19 12:38:26 +00:00
Imre Kaloz	4c043300fc	fix 820-usb_add_usb_find_device_by_name.patch SVN-Revision: 34254	2012-11-19 10:56:09 +00:00
Hauke Mehrtens	4fa5781a95	kernel: refresh patches SVN-Revision: 34253	2012-11-18 21:40:30 +00:00
Hauke Mehrtens	86cc79ac98	brcm47xx: add support for kernel 3.6 This is based on the patch by Peter Wagner. SVN-Revision: 34252	2012-11-18 21:27:00 +00:00
Hauke Mehrtens	db763080f4	kernel: add missing generic config options for 3.6+ SVN-Revision: 34250	2012-11-18 20:54:53 +00:00
Hauke Mehrtens	c159c7a462	kernel: add CONFIG_XZ_DEC=y to generic CONFIG_SQUASHFS_XZ selects CONFIG_XZ_DEC so this could also be moved. SVN-Revision: 34249	2012-11-18 20:48:53 +00:00
Gabor Juhos	d577d69838	ar71xx: use custom LZMA dictionary size for WNDR3700 images Based on a patch by Hannu Nyman. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34248	2012-11-18 20:25:13 +00:00
Imre Kaloz	935ca3f3eb	add 3.7-rc6 support (patch 820 still has to be fixed) SVN-Revision: 34247	2012-11-18 18:52:38 +00:00
Gabor Juhos	863657d040	generic: ar8216: add MIB counter support for the AR8216 switch as well Thanks to Jonas Gorski for the reference URL. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34245	2012-11-18 16:21:00 +00:00
Gabor Juhos	98f30aac8e	generic: ar8216: rename AR8216__STATS_ defines The names are misleading, those are only valid from AR8236. The AR8216 chip uses different offsets. Thanks to Jonas Gorski for the report. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34244	2012-11-18 16:20:56 +00:00
Gabor Juhos	9abd8cd004	generic ar8216: allow to read/reset MIB counters via swconfig Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34243	2012-11-18 12:26:35 +00:00
Gabor Juhos	4b17323b51	generic: ar8216: use dynamically allocated private data in ar8216_probe Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34242	2012-11-18 12:26:34 +00:00
Gabor Juhos	169e596268	ar71xx: add user-space support for the RB435G board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34240	2012-11-18 10:18:02 +00:00
Gabor Juhos	d44d954dec	ar71xx: add kernel support for the RB435G board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34239	2012-11-18 10:18:01 +00:00
Gabor Juhos	d62bddc620	ar71xx: update PCI IRQ map for RB4xx devices Should fix #12269. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34238	2012-11-18 09:51:04 +00:00
Gabor Juhos	31881357af	ar71xx: create profile and build image for the OpenMesh MR600 board Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34237	2012-11-18 09:32:41 +00:00
Gabor Juhos	9da2c85b67	ar71xx: enable sysupgrade for the OpenMesh MR600 Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34235	2012-11-18 09:32:39 +00:00
Gabor Juhos	6380301d01	ar71xx: rename om2p.sh upgrade script to openmesh.sh It will be used on other boards as well. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34234	2012-11-18 09:32:37 +00:00
Gabor Juhos	d325e622d2	scripts/om-fwupgradecfg-gen.sh: add support for the MR600 Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34233	2012-11-18 09:32:36 +00:00
Gabor Juhos	c3174179b7	ar71xx: add user-space support for the OpenMesh MR600 board Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34232	2012-11-18 09:32:35 +00:00
Gabor Juhos	8d4857d677	ar71xx: add kernel support for the OpenMesh MR600 board Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34231	2012-11-18 09:32:33 +00:00
Imre Kaloz	b220071cd2	target specific patches have nothing to do in generic.. SVN-Revision: 34230	2012-11-18 09:22:38 +00:00
Gabor Juhos	c90128ce31	generic: remove temporary config file introduced in r34227 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34229	2012-11-18 08:51:56 +00:00
Gabor Juhos	ff1e854511	kernel: update linux 3.6 to 3.6.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34227	2012-11-18 08:41:31 +00:00
Florian Fainelli	a4c205011b	move patches to patches-2.6.36 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34220	2012-11-16 16:32:55 +00:00
Florian Fainelli	974b9f5c9a	remove broken flag The SPARC qemu target works like a charm with the following qemu command-line: qemu-system-sparc64 -M sun4u -L /home/florian/dev/qemu/pc-bios -kernel build_dir/linux-sparc/linux-3.6.6/vmlinux -nographic Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34219	2012-11-16 16:32:52 +00:00
Florian Fainelli	5261a171e9	update to kernel 3.6.6 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34218	2012-11-16 16:32:49 +00:00
Florian Fainelli	7e199fcc06	add missing framebuffer config symbol Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34217	2012-11-16 16:32:45 +00:00
Florian Fainelli	b7f2f14801	advertise jffs2, squashfs and ext4 features Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34216	2012-11-16 16:32:42 +00:00
Florian Fainelli	c6d9304d17	resync kernel configuration with 3.6 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34215	2012-11-16 16:32:39 +00:00
Florian Fainelli	dd70319e6d	build root filesystems and install them in $(BIN_DIR) Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34214	2012-11-16 16:32:36 +00:00
Florian Fainelli	8ad0b56ba5	do not build crashlog on sparc too This is crashing the kernel in crashlog_init_fs(), until fixed, disable it for SPARC too. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34213	2012-11-16 16:32:33 +00:00
Florian Fainelli	19811eddb4	switch to kernel 3.6.6 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34212	2012-11-16 16:32:29 +00:00
Florian Fainelli	f98ac68e0e	add support for 3.6 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34211	2012-11-16 16:32:26 +00:00
Florian Fainelli	c555479127	move acx-mac80211 to the ar7 generic target None of the AC49x boards that we support actually have Wi-Fi. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34208	2012-11-16 13:00:55 +00:00
Florian Fainelli	b763d47bfe	3.6: add some framebuffer related config symbols Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34207	2012-11-16 13:00:51 +00:00
Florian Fainelli	bc73cf5345	push atm, br2684ctl and kmod-pppoa down the DSL Profile Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34206	2012-11-16 13:00:48 +00:00
Hauke Mehrtens	485f9573f8	brcm47xx: revert r33935: check for .ELF header in partition parser For sysupgrade the generic image should be used and the special image for the wgt634u is just needed for initial flashing over CFE. russell reported that with this patch sysupgrdae did not worked for him any more and he could not reproduce the error described in #11420. With the patch the linux partition also contained the loader which is in the first 128KB. SVN-Revision: 34201	2012-11-15 16:39:45 +00:00
Gabor Juhos	7da001d068	scripts: rename om2p-fwupgradecfg-gen.sh to more generic om-fwupgradecfg-gen.sh It will be used for non OM2P boards as well. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34200	2012-11-14 14:18:33 +00:00
Gabor Juhos	ee94ed4597	ar71xx: add profile and build image for the Ubiquiti UniFi AP-Outdoor board Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34198	2012-11-13 20:57:19 +00:00
Gabor Juhos	9c5c079329	ar71xx: add user-space support for the Ubiquiti UniFi AP-Outdoor board Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34197	2012-11-13 20:57:18 +00:00
Gabor Juhos	75c1d3ccc2	ar71xx: add support for the Ubiquiti UniFi AP-Outdoor device [juhosg: - rename and refresh 660-MIPS-ath79-ubnt-xm-add-unifi-outdoor patches - wrap long lines in mach-ubnt-xm - remove default network config, set it from uci-defaults/network instead - remove user-space, and image generation stuff] Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34196	2012-11-13 20:57:17 +00:00
Gabor Juhos	7ab0e1566f	ar71xx: add profiles and build images for old PowerCloud System devices [juhosg: - use 'PowerCloud Systems' instead of 'PCS' in the profiles - sort SingleProfile instances in image/Makefile] Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34195	2012-11-13 20:57:15 +00:00
Gabor Juhos	f6c3a8ddd6	generic: refresh 3.6 patches SVN-Revision: 34194	2012-11-13 20:57:13 +00:00
Florian Fainelli	e7f77f2742	fix badly named patch file SVN-Revision: 34193	2012-11-13 17:39:44 +00:00
Florian Fainelli	857456aef8	switch to kernel 3.6.6 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34192	2012-11-13 17:20:19 +00:00
Florian Fainelli	390b8eb864	fix CBUS UART registration Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34191	2012-11-13 17:20:14 +00:00
Gabor Juhos	62c8ff19ad	ar71xx: add profile and build image for the TL-WA7510N board [juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch] Signed-off-by: Stefan Helmert <helst_listen@aol.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34190	2012-11-13 14:48:03 +00:00
Gabor Juhos	165b7d2173	ar71xx: user space support for the TL-WA7510N [juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch] Signed-off-by: Stefan Helmert <helst_listen@aol.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34188	2012-11-13 14:48:01 +00:00
Gabor Juhos	91bab828aa	ar71xx: add support for TP-Link TL-WA7510N It is mostly the same as TL-WA901N. WLAN and LAN are working. LAN LED is working. WLAN signal strength LEDs are not working yet. http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n [juhosg: - cleanup commit message - move non kernel related stuff into separate changes - rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch - merge WA7510N support into the mach-tl-wa901nd.c file - add 3.6 support] Signed-off-by: Stefan Helmert <helst_listen@aol.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34187	2012-11-13 14:48:00 +00:00
Gabor Juhos	ce9d4fadfa	ar71xx: refresh patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34186	2012-11-13 14:47:58 +00:00
John Crispin	3b419e506c	fixes ar9 / dgn3500 support SVN-Revision: 34180	2012-11-13 08:54:14 +00:00
John Crispin	dd8c625424	previous commit pushed 1 file too many ;) SVN-Revision: 34179	2012-11-12 21:36:23 +00:00
John Crispin	ced0cf3a94	move ethernet hw init to init/uninit functions This should fix the stalled irq problem seen by several people. This is not the real fix, but rather moves the bug to the un/init patch of the driver. The real bug still needs to be fixed, but this workaround should be suffcient to make the ethernet stable. SVN-Revision: 34177	2012-11-12 21:35:01 +00:00
Hauke Mehrtens	31541f81c3	brcm47xx: remove double definition of kmod-tg3 added in r34150 SVN-Revision: 34176	2012-11-12 21:34:00 +00:00
Hauke Mehrtens	bac93bdd8e	brcm47xx: fix cfe config detection on WGT634U broken in r33920 Thanks Russell Senior for reporting this. SVN-Revision: 34175	2012-11-12 21:32:33 +00:00
Luka Perkov	00243027dd	cns3xxx: merge gpio patches SVN-Revision: 34174	2012-11-12 19:27:30 +00:00
Luka Perkov	fb9b572f0a	cns3xxx: fix build failure after r34168 SVN-Revision: 34173	2012-11-12 19:27:29 +00:00
Florian Fainelli	a8c492dbb3	MIPS: add a build fix for arch/mips/boot/compressed/decompress.c And get rid of the AR7 patch because at least the Alchemy SoC also needs it Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34170	2012-11-12 12:49:47 +00:00
Imre Kaloz	5cddb170cd	reorder, rename and refresh patches SVN-Revision: 34169	2012-11-12 09:18:00 +00:00
Imre Kaloz	77504ac06f	split spi patch, follow mainline file naming SVN-Revision: 34168	2012-11-12 08:22:14 +00:00
Imre Kaloz	9a780e0328	split the i2c patch, merge the retry fixup SVN-Revision: 34167	2012-11-12 08:21:38 +00:00
John Crispin	5f30fe31b6	move redboot boardconfig patch into target folder SVN-Revision: 34166	2012-11-12 07:56:37 +00:00
Imre Kaloz	527c473674	add support for the Tonze AP-422/425 SVN-Revision: 34165	2012-11-11 21:04:30 +00:00
Imre Kaloz	ee9e3bf82e	refresh patch SVN-Revision: 34164	2012-11-11 21:03:52 +00:00
Imre Kaloz	dcfd6cd5a4	generate single images for tftp flashing as well as sysupgrade images for boards with old u-boot SVN-Revision: 34163	2012-11-11 20:57:04 +00:00
Luka Perkov	16275bdd15	cns3xxx: convert dwc_otg patches to files SVN-Revision: 34162	2012-11-11 20:03:58 +00:00
Luka Perkov	e38adfc912	cns3xxx: convert ethernet patches to files SVN-Revision: 34161	2012-11-11 20:03:56 +00:00
Jonas Gorski	306894b88f	bcm63xx: switch to 3.6.6 SVN-Revision: 34160	2012-11-11 19:57:17 +00:00
Imre Kaloz	4658e463d9	move fixed mapping of internal devices into vmalloc region SVN-Revision: 34158	2012-11-11 19:29:27 +00:00
Florian Fainelli	9760644af4	advertise squashfs feature Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34157	2012-11-11 19:26:54 +00:00
Florian Fainelli	dd541cbefa	add support for Linux 3.6 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34156	2012-11-11 19:26:50 +00:00
Florian Fainelli	f7fcb3c845	split kernel config between generic, au1500 and au1550 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34155	2012-11-11 19:26:44 +00:00
Florian Fainelli	b363a7e491	add support for Linux 3.6 SVN-Revision: 34154	2012-11-11 18:41:09 +00:00
Florian Fainelli	854c504781	move files directory to files-3.3 SVN-Revision: 34153	2012-11-11 18:40:48 +00:00
Hauke Mehrtens	cadd36a303	brcm47xx: remove ssb-gige package CONFIG_SSB_DRIVER_GIGE is set in the target config of the brcm47xx target, so it will always be activated and the kmod-ssb-gige is not needed any more. The kmod-ssb-gige package is not generated in an build as it does not contain any files and the makes the image builder fail when generating a image integrating this package. SVN-Revision: 34150	2012-11-11 17:30:33 +00:00
Florian Fainelli	62c9156af6	generate image for AC49x Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34149	2012-11-11 16:11:39 +00:00
Florian Fainelli	9c7d221d47	create AC49x subtarget Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34148	2012-11-11 16:11:34 +00:00
Florian Fainelli	668234c109	create generic subtarget Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34147	2012-11-11 16:11:29 +00:00
Florian Fainelli	4891549bcd	detect AC49x flash partitions Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34146	2012-11-11 16:11:22 +00:00
Florian Fainelli	feb968d964	support AC49x bootloader environment Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34145	2012-11-11 16:11:14 +00:00
Florian Fainelli	7d09c61d65	add AudioCodes AC49x platform support to kernel Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34144	2012-11-11 16:11:09 +00:00
Florian Fainelli	d9b89db380	free memory below kernel offset Some bootloaders (e.g. PSPBoot on AC49x) have a load-offset, this frees that memory region so it is usable for Linux. Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34143	2012-11-11 16:11:00 +00:00
Jo-Philipp Wich	298a8e2300	x86/generic: don't disable usbfs (#12452 ) SVN-Revision: 34139	2012-11-10 23:28:58 +00:00
Jonas Gorski	c54fa281b1	bcm63xx: fix compilation with kmod-ohci enabled with 3.6 Fixes the following error: drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start': drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration] Reported-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 34138	2012-11-10 22:10:47 +00:00
Jonas Gorski	15519bec9c	bcm63xx: add two missing usb patches to 3.6 SVN-Revision: 34137	2012-11-10 19:59:16 +00:00
Jonas Gorski	06ad6ffe16	bcm63xx: fix Ethernet DMA for 636x and 6328 for 3.6 SVN-Revision: 34136	2012-11-10 19:59:07 +00:00
Imre Kaloz	f3f3f52259	cns3xxx: clean up pcie patches Combine two pcie patches (2nd patch undid the 1st patch) together and refresh the other affected patches Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 34132	2012-11-09 21:37:54 +00:00
John Crispin	71ddec8091	add more profiles SVN-Revision: 34131	2012-11-09 19:26:58 +00:00
John Crispin	88e4d93802	a few more dts files (WIP) SVN-Revision: 34130	2012-11-09 19:26:43 +00:00
John Crispin	a30b3066ce	add mtd split and atm patch SVN-Revision: 34129	2012-11-09 19:26:30 +00:00
Felix Fietkau	46288bf98e	x86: use $(strip) for the at_keyboard check SVN-Revision: 34127	2012-11-09 10:53:36 +00:00
Felix Fietkau	0a9e05fb0e	x86: only enable at_keyboard for the generic and kvm_guest subtargets to avoid hangs on alix2 and others (thx, russell) SVN-Revision: 34126	2012-11-09 10:19:51 +00:00
Gabor Juhos	502661f685	generic: sanitize deps_initramfs list If any filename in the intramfs dependency list contains a colon, that causes a kernel build error like this: /devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: * multiple target patterns. Stop. make[5]: * [usr] Error 2 Fix it by removing such filenames from the deps_initramfs list. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34125	2012-11-09 09:07:29 +00:00
Luka Perkov	965c190444	cns3xxx: exit from laguna late_initcall if not running on laguna board SVN-Revision: 34120	2012-11-08 11:31:56 +00:00
Imre Kaloz	0da0dc0f2b	cns3xxx: add PPS support for laguna Many Laguna products have on-board GPS with Pulse-per-second (PPS) support. This patch adds kernel support (statically) and adds the platform data in laguna board support. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 34115	2012-11-08 05:42:31 +00:00
Imre Kaloz	efcdc21824	fixup symbol selection SMP already selects HAVE_ARM_TWD and HAVE_ARM_SCU, ARCH_CNS3XXX already selects MIGHT_HAVE_PCI SVN-Revision: 34114	2012-11-08 05:40:34 +00:00
Luka Perkov	4d66b749de	cns3xxx: fix coding style in board script SVN-Revision: 34113	2012-11-07 23:12:06 +00:00
John Crispin	6090ddc896	adds fon20n profile SVN-Revision: 34112	2012-11-07 20:26:31 +00:00
John Crispin	3991526989	ramips: use kernel 3.6.6 ## Booting image at 80800000 ... Image Name: MIPS OpenWrt Linux-3.6.6 Created: 2012-11-06 14:19:54 UTC System Control Status = 0x20440000 Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 3560768 Bytes = 3.4 MB Load Address: 80000000 Entry Point: 80000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80000000) ... ## Giving linux memsize in MB, 32 Starting kernel ... [ 0.000000] Linux version 3.6.6 (daniel@localhost.localdomain) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 0001964c (MIPS 24KEc) [ 0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x01ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x01ffffff] [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Writing ErrCtl register=0000c388 [ 0.000000] Readback ErrCtl register=0000c388 [ 0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem) [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:48 [ 0.000000] console [ttyS1] enabled, bootconsole disabled [ 0.000000] console [ttyS1] enabled, bootconsole disabled [ 0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952) [ 0.090000] pid_max: default: 32768 minimum: 301 [ 0.100000] Mount-cache hash table entries: 512 [ 0.110000] NET: Registered protocol family 16 [ 0.120000] MIPS: machine is Allnet ALL0239-3G [ 0.140000] bio: create slab <bio-0> at 0 [ 0.150000] Switching to clocksource MIPS [ 0.160000] NET: Registered protocol family 2 [ 0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [ 0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.200000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.210000] TCP: reno registered [ 0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.240000] NET: Registered protocol family 1 [ 5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 5.490000] msgmni has been set to 52 [ 5.500000] io scheduler noop registered [ 5.510000] io scheduler deadline registered (default) [ 5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A [ 5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A [ 5.560000] physmap platform flash device: 00800000 at bf000000 [ 5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000 [ 5.600000] Amd/Fujitsu Extended Query Table at 0x0040 [ 5.610000] Amd/Fujitsu Extended Query version 1.3. [ 5.620000] number of CFI chips: 1 [ 5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0 [ 5.640000] Creating 6 MTD partitions on "physmap-flash.0": [ 5.650000] 0x000000000000-0x000000030000 : "u-boot" [ 5.660000] 0x000000030000-0x000000040000 : "u-boot-env" [ 5.680000] 0x000000040000-0x000000050000 : "factory" [ 5.690000] 0x000000050000-0x000000130000 : "kernel" [ 5.700000] 0x000000130000-0x000000800000 : "rootfs" [ 5.710000] mtd: partition "rootfs" set to be root filesystem [ 5.730000] split_squashfs: error occured while reading from "physmap-flash.0" [ 5.740000] 0x000000050000-0x000000800000 : "firmware" [ 5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33 [ 5.780000] TCP: cubic registered [ 5.780000] NET: Registered protocol family 17 [ 5.790000] 8021q: 802.1Q VLAN Support v1.8 [ 5.820000] Freeing unused kernel memory: 2676k freed [ 6.490000] Button Hotplug driver version 0.4.1 - preinit - Press the [f] key and hit [enter] to enter failsafe mode - regular preinit - - init - Please press Enter to activate this console. [ 10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993 [ 10.170000] Backport based on wireless-testing.git master-2012-09-07 [ 10.180000] compat.git: wireless-testing.git [ 10.210000] cfg80211: Calling CRDA to update world regulatory domain [ 10.230000] cfg80211: World regulatory domain updated: [ 10.240000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.250000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.270000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.280000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.300000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.310000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.430000] NET: Registered protocol family 10 [ 10.760000] PPP generic driver version 2.4.2 [ 10.820000] l2tp_core: L2TP core driver, V2.0 [ 10.840000] l2tp_netlink: L2TP netlink interface [ 10.870000] sit: IPv6 over IPv4 tunneling driver [ 10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.060000] NET: Registered protocol family 24 [ 11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max) [ 11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 14.510000] device eth0.1 entered promiscuous mode [ 14.520000] device eth0 entered promiscuous mode [ 14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready [ 14.550000] br-lan: port 1(eth0.1) entered forwarding state [ 14.560000] br-lan: port 1(eth0.1) entered forwarding state [ 16.560000] br-lan: port 1(eth0.1) entered forwarding state [ 16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33 BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __ \| \|.-----.-----.-----.\| \| \| \|.----.\| \|_ \| - \|\| _ \| -__\| \|\| \| \| \|\| _\|\| _\| \|_______\|\| __\|_____\|__\|__\|\|________\|\|__\| \|____\| \|__\| W I R E L E S S F R E E D O M ----------------------------------------------------- BARRIER BREAKER (Bleeding Edge, r34079) ----------------------------------------------------- * 1/2 oz Galliano Pour all ingredients into * 4 oz cold Coffee an irish coffee mug filled * 1 1/2 oz Dark Rum with crushed ice. Stir. * 2 tsp. Creme de Cacao ----------------------------------------------------- root@OpenWrt:/# SVN-Revision: 34111	2012-11-07 20:26:21 +00:00
John Crispin	480892226d	ramips: add HAVE_CLK to Kconfig on all ramips socs Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 34110	2012-11-07 20:26:04 +00:00
John Crispin	feb31be6af	ramips: add linux-3.6 configuration for ramips socs Signed-off-by: Daniel Golle <dgolle@allnet.de> create mode 100644 target/linux/ramips/rt288x/config-3.6 create mode 100644 target/linux/ramips/rt305x/config-3.6 create mode 100644 target/linux/ramips/rt3883/config-3.6 SVN-Revision: 34109	2012-11-07 20:25:55 +00:00
John Crispin	ca1fcaed5b	ramips: port patches to linux-3.6 Signed-off-by: Daniel Golle <dgolle@allnet.de> create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch SVN-Revision: 34108	2012-11-07 20:25:34 +00:00
Jonas Gorski	f2bb7754f5	bcm63xx: Enable endian check support for ath9k pci fixup. Some ath9k caldatas need to be "endian checked". This patch allows selecting wether to enable endian check or not. Endian check is disabled by default. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 34105	2012-11-07 09:01:03 +00:00
Imre Kaloz	f2b75b517b	fixup typos in the compex patch SVN-Revision: 34104	2012-11-07 07:51:24 +00:00
Jonas Gorski	a50d121d8e	linux: export bcm963xx_tag.h to userspace Export bcm963xx_tag.h so mtd can use it without using kernel includes. Signed-off-by: Catalin Patulea <cat@vv.carleton.ca> [jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header from original location, refresh patches, use a more matching patch number, port to 3.6] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 34103	2012-11-06 15:21:46 +00:00
Luka Perkov	865933a0ec	cns3xxx: refresh kernel config file SVN-Revision: 34102	2012-11-06 11:16:43 +00:00
Luka Perkov	9a5c26d4ef	cns3xxx: use files directory SVN-Revision: 34101	2012-11-06 11:16:41 +00:00
John Crispin	7404e59bbd	add OWRTDTB marker patch SVN-Revision: 34100	2012-11-06 10:39:43 +00:00
John Crispin	3a1851964e	add support for arv7525 SVN-Revision: 34097	2012-11-06 07:38:24 +00:00
Imre Kaloz	e141cbb0f9	refresh patches SVN-Revision: 34095	2012-11-06 05:45:12 +00:00
Imre Kaloz	1a9dfd566e	add default packages SVN-Revision: 34094	2012-11-06 05:39:08 +00:00
Jonas Gorski	0722fd9c63	linux: generic: fix split_squashfs for 3.6 _read expects the retlen to be initialized to zero, which the mtd_read helper does. So fix it by using mtd_read instead of calling _read directly. SVN-Revision: 34093	2012-11-06 00:48:21 +00:00
Jonas Gorski	5bc7d81a20	bcm63xx: fix SPW303V images SPW303V also needs its CRC fixed up since increasing the image size to 4MB to prevent the dual image mode of CFE. SVN-Revision: 34091	2012-11-05 22:50:29 +00:00
Gabor Juhos	e92da5e7ae	ar71xx: nuke ath79_set_usb_power_gpio helper It is no longer used. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34088	2012-11-05 13:23:28 +00:00
Gabor Juhos	f2528b1792	ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34087	2012-11-05 13:23:27 +00:00
Gabor Juhos	e8669729bc	kernel: update linux 3.6 to 3.6.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34086	2012-11-05 13:22:09 +00:00
Imre Kaloz	d822ecfdf8	use the mainline machname for the compex boards SVN-Revision: 34083	2012-11-05 11:38:23 +00:00
Gabor Juhos	a0dd47bbed	ramips: enable USB power on the DIR-645 Closes #12422. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34082	2012-11-05 11:04:45 +00:00
Gabor Juhos	5e43b934fd	linux/3.3: backport an upstream GPIO patch The backported patch introduces new flags to automatically export GPIOs when using the convenience unctions gpio_request_one() or gpio_request_array(). This will be used by ar71xx/ramips platforms. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34081	2012-11-05 11:04:43 +00:00
Gabor Juhos	829aaedcbf	ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 34078	2012-11-05 06:58:53 +00:00
Gabor Juhos	ed35253f4c	ar71xx: don't use the unknown LED on the ZCN-1523-5 board According to #12421, GPIO 1 controls the power output on the unused lines of the LAN2 port. Remove the LED definition in order to prevent possible permanent hardware damage. If someone needs that, the power-out feature can be controlled via the GPIO sysfs interface. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34076	2012-11-04 22:08:54 +00:00
Gabor Juhos	1b744e1ca5	ar71xx: include mtd layout in the command line for ZCN-1523H-* boards Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34074	2012-11-04 21:12:20 +00:00
Gabor Juhos	b78a736dc2	ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards Also add the missing ATH79_MACH_ZCN_1523H_5 symbol. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34072	2012-11-04 20:15:18 +00:00
Felix Fietkau	6040b1d29a	linux-3.6: fix portability of some includes files in tools/ used on the host SVN-Revision: 34068	2012-11-04 17:01:15 +00:00
John Crispin	05fbb370dc	3.6 is not the default yet SVN-Revision: 34065	2012-11-03 13:29:44 +00:00
John Crispin	a9ad36b7f1	adds dts files and make devicetree images buildable SVN-Revision: 34064	2012-11-02 20:07:47 +00:00
John Crispin	c8ae6dac56	update ase target for 3.6 SVN-Revision: 34063	2012-11-02 20:07:41 +00:00
John Crispin	dc8641f7fa	add subtarget, as of 3.6 we dont seperate xway SoC SVN-Revision: 34062	2012-11-02 20:07:36 +00:00
John Crispin	dd619da4fc	adds 3.6 files, patches and config SVN-Revision: 34061	2012-11-02 20:07:26 +00:00
John Crispin	736835343c	move files/ -> files-3.3/ SVN-Revision: 34060	2012-11-02 20:07:02 +00:00
John Crispin	fa316620a7	prepare Makefile for 3.6 SVN-Revision: 34059	2012-11-02 20:06:51 +00:00
Gabor Juhos	0005762690	generic: make yaffs work on 3.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34054	2012-11-01 11:07:23 +00:00
Gabor Juhos	ffcb4b0fe1	generic: rename jffs2 patches Make room for the upcoming yaffs patches. No functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34053	2012-11-01 11:07:16 +00:00
Daniel Dickinson	7e0f8049fa	Fix feeds.conf.default when no SVN info present SVN-Revision: 34051	2012-11-01 07:15:49 +00:00
Gabor Juhos	6c8c3ee77d	generic: use mtd_* helpers in the yaffs code Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34046	2012-10-31 21:17:30 +00:00
Imre Kaloz	3c12bad276	move PCIe init to subsys init call ARM Linux PCI/PCIe hardware intialization needs to occur before device_init as it does not support hotplug. I have modeled the cns3xxx PCIe init after other ARM platforms. Registering it early resolves resource issues occuring during bus enumeration that occur when a device driver is linked static in the kernel. Instead of passing in a bitmask to enable the 2 available ports, link detect is used to enable ports that have a valid link. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 34044	2012-10-31 20:16:53 +00:00
Gabor Juhos	07a762c4c5	kernel: update linux 3.6 to 3.6.5 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34042	2012-10-31 20:09:39 +00:00
Gabor Juhos	a4126685c6	generic: split yaffs-3.2-fix patch Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34041	2012-10-31 19:33:12 +00:00
Gabor Juhos	4baeb543f0	generic: replace yaffs-2.6.39 patch Use backported upstream patches instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34032	2012-10-31 15:12:45 +00:00
Gabor Juhos	b888c2deab	generic: replace yaffs mutex_fix patch Use a backported patch instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34021	2012-10-30 21:16:24 +00:00
Gabor Juhos	d54782d01a	generic: replace yaffs symlink fix patch Use a backported patch instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34020	2012-10-30 21:16:23 +00:00
Gabor Juhos	9a8ccc1a08	generic: rename yaffs patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34019	2012-10-30 21:16:21 +00:00
Florian Fainelli	e14e4306c9	set earlyprintk UART to be the default Realview UART SVN-Revision: 34015	2012-10-30 16:56:10 +00:00
Gabor Juhos	449f88df0f	generic: fold yaffs_git_2010_10_20 patch to generic/files Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34013	2012-10-30 14:58:17 +00:00
Gabor Juhos	56190ed0fc	generic: fold yaffs_cvs_2009_04_24 patch to generic/files Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34012	2012-10-30 14:58:13 +00:00
Gabor Juhos	7228a91a3b	ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards The default pll_1000 value had to be changed in order to make it working. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33993	2012-10-29 17:24:30 +00:00
Gabor Juhos	e91dc2e5b3	target: refresh all target configs with kconfig.pl Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33987	2012-10-29 10:11:05 +00:00
Imre Kaloz	c0c69c974f	add missing 3.6 symbols SVN-Revision: 33986	2012-10-29 10:00:02 +00:00
Imre Kaloz	8e49dfe68a	the uImage's filename will hardly change SVN-Revision: 33985	2012-10-29 09:55:20 +00:00
Gabor Juhos	f7b2089704	generic: add more symbols for 3.6 Also refresh the config file with kconfig.pl. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33984	2012-10-29 09:08:59 +00:00
Gabor Juhos	e4db63fd64	ar71xx: add initial support for 3.6 The nand subtarget is not working yet. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33983	2012-10-28 19:52:02 +00:00
Gabor Juhos	87186c5ed4	kernel: update linux 3.6 to 3.6.4 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33982	2012-10-28 18:59:39 +00:00
Gabor Juhos	a6549ac1cb	ar71xx: remove NO_AUTOINCR flag from the NAND drivers The flag is not present in 3.6. Also add compatibility patches for 3.3. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33971	2012-10-28 12:21:15 +00:00
Gabor Juhos	9a37cf7ec6	generic: fix crashlog patch for 3.6 kmsg_dump() uses an iterator to receive log buffer content since 3.5. Change the 'crashlog_do_dump' function in order to make it compatible with the new version. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33970	2012-10-28 09:50:50 +00:00
Gabor Juhos	e2ec99889e	ar71xx: ag71xx: fix build_skb arguments for 3.6 Also add a compatibility patch for 3.3 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33969	2012-10-27 17:11:06 +00:00
Gabor Juhos	7640a7cc24	generic: fix tcp_window_check patch for 3.6 Move the new entry to the end of the tcp_sysctl_table array to fix the following error: [ 7.670000] sysctl table check failed: net/netfilter/nf_conntrack_tcp_max_retrans No data [ 7.680000] Call Trace: [ 7.680000] [<80273bc4>] dump_stack+0x8/0x34 [ 7.680000] [<80128710>] __register_sysctl_table+0x374/0x3a8 [ 7.690000] [<868d5034>] nf_conntrack_l4proto_unregister+0x158/0x1a0[nf_conntrack] [ 7.700000] [<868d50e4>] nf_conntrack_l4proto_register+0x68/0x21c[nf_conntrack] [ 7.710000] [<868b237c>] need_ipv4_conntrack+0x35c/0xb60[nf_conntrack_ipv4] [ 7.710000] [ 7.720000] nf_conntrack_l4proto_tcp4 :protocol register failed [ 7.720000] nf_conntrack_ipv4: can't register pernet ops [ 7.780000] nf_nat: Unknown symbol nf_nat_seq_adjust_hook (err 0) [ 7.790000] nf_nat: Unknown symbol need_ipv4_conntrack (err 0) [ 7.800000] iptable_nat: Unknown symbol nf_nat_packet (err 0) [ 7.810000] iptable_nat: Unknown symbol nf_nat_setup_info (err 0) [ 7.820000] iptable_nat: Unknown symbol nf_nat_icmp_reply_translation (err 0) [ 7.820000] iptable_nat: Unknown symbol need_ipv4_conntrack (err 0) [ 7.840000] ipt_MASQUERADE: Unknown symbol nf_nat_setup_info (err 0) [ 7.860000] nf_nat_ftp: Unknown symbol nf_nat_follow_master (err 0) [ 7.870000] nf_nat_ftp: Unknown symbol __nf_nat_mangle_tcp_packet (err 0) [ 7.890000] nf_nat_irc: Unknown symbol nf_nat_follow_master (err 0) [ 7.900000] nf_nat_irc: Unknown symbol __nf_nat_mangle_tcp_packet (err 0) Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33968	2012-10-27 15:42:25 +00:00
Imre Kaloz	50be09e1f7	instead of updating the whole file, just add the additional boards SVN-Revision: 33966	2012-10-27 13:29:36 +00:00
Imre Kaloz	1a4f117398	rename erase size variables SVN-Revision: 33964	2012-10-27 10:50:55 +00:00
Imre Kaloz	549d5a6e34	add support for Netgear WN802T SVN-Revision: 33963	2012-10-27 10:48:22 +00:00
Imre Kaloz	cf7aed0a76	don't enforce rootfs location SVN-Revision: 33962	2012-10-27 10:43:47 +00:00
Imre Kaloz	702fd5cdb5	generate images for the D-Link DWL-3150 as well SVN-Revision: 33961	2012-10-27 09:42:58 +00:00
Gabor Juhos	3a86affcdd	ar71xx: enable sysupgrade for the CAP4200AG board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33960	2012-10-27 08:55:42 +00:00
Gabor Juhos	e99d557c08	ar71xx: add profile and build image for the CAP4200AG Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33958	2012-10-27 08:55:40 +00:00
Gabor Juhos	9287e0c863	ar71xx: add user-space part for the CAP4200AG Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33957	2012-10-27 08:55:39 +00:00
Gabor Juhos	d54c9653e9	ar71xx: add support for the Senao CAP4200AG board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33956	2012-10-27 08:55:38 +00:00
Gabor Juhos	3b7cb4eb4a	ar71xx: add ath79_wmac_disable_[25]ghz helpers Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33955	2012-10-27 08:55:37 +00:00
Gabor Juhos	e8fc46b7c5	generic: allow to disable [25]GHz support in ath9k via platform data Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33954	2012-10-27 08:55:36 +00:00
Gabor Juhos	c92998f9d9	generic: use mtd_read in myloader parser Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33952	2012-10-27 07:57:59 +00:00
Gabor Juhos	269872fe1e	ar71xx: use mtd_read in wrt160nl_part Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33951	2012-10-27 07:57:58 +00:00
Gabor Juhos	973eda6077	ar71xx: use mtd_read in tplinkpart Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33950	2012-10-27 07:57:57 +00:00
Gabor Juhos	28f3adc2ed	ar71xx: generate 4,8,16M images for the WPE72 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33949	2012-10-27 07:57:55 +00:00
Gabor Juhos	ee9376d153	generic: swconfig: use led_set_brightness in LED control code The 'led_brightness_set' function has been renamed to 'led_set_brightness' in recent ernels. Use the new name and add a compatibility patch for 3.3. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33946	2012-10-26 18:58:18 +00:00
Gabor Juhos	1127781d40	generic: add missing symbols for 3.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33945	2012-10-26 18:58:15 +00:00
Gabor Juhos	ff481a5518	ar71xx: reject TP-Link images containing a bootloader The original TP-Link firmware images can be flashed via the sysupgrade command, however those may contain a bootloader. Flashing such an image via sysupgrade bricks the board, and it can't be recovered without a serial console. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33944	2012-10-26 18:58:13 +00:00
Gabor Juhos	db5eea6acd	ramips: use correct key code for the RFKILL switch on the TEW-691GR Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33943	2012-10-26 18:53:44 +00:00
Florian Fainelli	c691d165c7	add 3.6 kernel configuration SVN-Revision: 33942	2012-10-26 15:24:19 +00:00
Florian Fainelli	9af90aa80c	add missing 6345 clock bits patch to 3.6 patches SVN-Revision: 33941	2012-10-26 15:24:14 +00:00
Florian Fainelli	fad6afdf06	add some more 3.6 config symbols SVN-Revision: 33940	2012-10-26 15:24:10 +00:00
Florian Fainelli	8d69af7c9f	add preliminary support for 3.6 kernel SVN-Revision: 33936	2012-10-25 21:16:51 +00:00
Hauke Mehrtens	6a699a8ae8	brcm47xx: check for .ELF header in partition parser The image format for the wgt634u is different from the normal format. Without this patch the partition parser detects a 128kb bigger partition after every update. This closes #11420 Thank you b.sander for the patch. SVN-Revision: 33935	2012-10-25 19:49:20 +00:00
Hauke Mehrtens	d4ef5de604	kernel: add PCI id 14e4:4350 to ssb * 14e4:4350 is found on a Broadcom BCM43222. * remove some warnings when using a BCM43222. SVN-Revision: 33929	2012-10-25 15:50:47 +00:00
Felix Fietkau	1e2962e63c	kernel: add a few missing config symbols for x86. added to generic config because of dependencies, so that kernel_menuconfig does not remove them again SVN-Revision: 33923	2012-10-25 15:11:45 +00:00
Felix Fietkau	5591188ac3	kernel: refresh config files using kconfig.pl SVN-Revision: 33922	2012-10-25 15:11:40 +00:00
Hauke Mehrtens	dca633f1c8	kernel: update bcma and ssb to master-2012-10-18 from wireless-testing * update the flash driver for bcm47xx to use the stubs already in bcma * do some misc enhancements to the flash drivers for bcm47xx SVN-Revision: 33920	2012-10-25 14:33:47 +00:00
Florian Fainelli	dea2da55df	fix Ethernet DMA for 636x and 6328 after r33916 SVN-Revision: 33918	2012-10-25 11:54:41 +00:00
Florian Fainelli	917670922b	add support for the Dynalink RTA770BW board This board id is used by the Siemens Gigaset SE515 router. SVN-Revision: 33917	2012-10-24 21:25:22 +00:00
Florian Fainelli	bdfcbb8bee	make BCM6345 Ethernet DMA changes runtime checks The semantics of the DMA engine are identical, we just have a couple of special case handling. SVN-Revision: 33916	2012-10-24 21:25:10 +00:00
Florian Fainelli	df6f9072ab	ARM: fix XZ decompressor stub build failure on strstr() SVN-Revision: 33915	2012-10-24 15:57:31 +00:00
Florian Fainelli	b5c27880ee	fixup generic 3.6 kernel config It was not meant to be committed as-is in r33911 SVN-Revision: 33914	2012-10-24 15:57:24 +00:00
Florian Fainelli	a6bfca90b0	fix IFF_NO_IP_ALIGN bitmask to contain only 1 bit set This issue got introduced while porting the patch over 3.6 in r33897 SVN-Revision: 33913	2012-10-24 13:23:20 +00:00
Florian Fainelli	7e856e5a97	make all 3.6 patches apply and build SVN-Revision: 33911	2012-10-24 13:05:22 +00:00
Florian Fainelli	4afb91a12f	swconfig: get rid of the NLA_PUT_* macros Upstream kernel 3.6 has removed this usage, use the plain functions directly as intended. SVN-Revision: 33906	2012-10-24 13:05:04 +00:00
Jo-Philipp Wich	f600ec5b3b	x86: allow both old and new grub signatures in sysupgrade SVN-Revision: 33898	2012-10-23 16:34:00 +00:00
Imre Kaloz	949b46d13d	linux 3.6 support (work in progress) SVN-Revision: 33897	2012-10-23 12:21:34 +00:00
Jonas Gorski	0d2cf5f9e3	kernel: move the bcma fallback sprom fix to generic bcm63xx needs the bcma fallback sprom fix, too. SVN-Revision: 33896	2012-10-23 10:57:49 +00:00
Jonas Gorski	0cc4bed41c	add support for Comtrend AR5381u. Router: Comtrend AR5381u. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: fix subject, indentation in patch] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 33895	2012-10-23 10:57:47 +00:00
Jonas Gorski	d73871fb18	add support for Comtrend AR5387un. Router: Comtrend AR5387un. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: fix subject, indentation in patch] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 33894	2012-10-23 10:57:44 +00:00
Jonas Gorski	e93725a743	add support for HomeStation ADB P.DG A4001N. Router: HomeStation ADB P.DG A4001N. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: fix subject, indentation in patch] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 33893	2012-10-23 10:57:39 +00:00
Felix Fietkau	95e642632a	x86: correct image magic for grub2 images Sysupgrade broke on x86 when grub2 superceded grub. This patch corrects tha magic_word to be expected in grub2 combined images. Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 33890	2012-10-22 16:06:29 +00:00
Florian Fainelli	61686a1514	add back support for BCM6345 Ethernet DMA engine SVN-Revision: 33889	2012-10-22 12:57:22 +00:00
Florian Fainelli	eeed82c04e	fix clocks bits for BCM6345 SVN-Revision: 33888	2012-10-22 12:57:14 +00:00
Florian Fainelli	ca25e61c6c	refresh 3.3 patches SVN-Revision: 33887	2012-10-21 21:30:30 +00:00
Jonas Gorski	e6171dfb2c	Add F@ST2604 board support. Add Sagem F@ST2604 board support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 33886	2012-10-21 14:35:06 +00:00
Gabor Juhos	f1f388d527	ar71xx: rw2458n - fix flash parts See #12338. Redwave rw2458 has uboot, not redboot. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33867	2012-10-19 18:32:49 +00:00
Gabor Juhos	b530d9d2b3	ramips: disable 5GHz on the built in wireless mac of the TEW-69{1,2}GR Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33864	2012-10-19 17:42:22 +00:00
Gabor Juhos	6ca2970e4b	ramips: add profile and build image for the TEW-691GR board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33852	2012-10-18 07:23:13 +00:00
Gabor Juhos	21180e29f7	ramips: add user-space support for TEW-691GR Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33851	2012-10-18 07:23:12 +00:00
Gabor Juhos	25d53c4c28	ramips: rt3883: add initial support for the TRENDnet TEW-691GR board No wireless support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33850	2012-10-18 07:23:11 +00:00
Gabor Juhos	462a53c367	ramips: add profile and build image for the TEW-692GR board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33849	2012-10-18 07:23:10 +00:00
Gabor Juhos	d3c368c324	ramips: add user-space support for the TEW-692GR board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33847	2012-10-18 07:23:07 +00:00
Gabor Juhos	7f8b7207c9	ramips: rt3883: add initial support for TRENDnet TEW-692GR board No wireless support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33846	2012-10-18 07:23:06 +00:00
Gabor Juhos	bf9ae9432b	ramips: add profile and build image for the DIR-645 board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33845	2012-10-18 07:23:04 +00:00
Gabor Juhos	06edafd079	ramips: add user space support for the DIR-645 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33844	2012-10-18 07:23:03 +00:00
Gabor Juhos	d1a253a2fd	ramips: rt3883: add inital support for the DIR-645 board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33843	2012-10-18 07:23:02 +00:00
Gabor Juhos	e962c16a88	ramips: use get_magic_long in sysupgrade image check Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33842	2012-10-18 07:23:00 +00:00
Gabor Juhos	0045449b1b	generic: add driver for the the RTL8367R{B,-VB} switches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33839	2012-10-18 07:22:56 +00:00
Felix Fietkau	96fa602499	ixp4xx: add sysupgrade support Signed-off-by: Tim Harvey <tharvey@gateworks.com> target/linux/ixp4xx/base-files/lib/ixp4xx.sh \| 25 ++ target/linux/ixp4xx/base-files/lib/upgrade/platform.sh \| 156 +++++++++++++++++ target/linux/ixp4xx/image/Makefile \| 11 + 3 files changed, 192 insertions(+) SVN-Revision: 33828	2012-10-17 22:03:46 +00:00
Felix Fietkau	879b7a7a9b	cns3xxx: update FIQ header file and disable RWFO Update header file appropriately and disable read for ownership Note that the FIQ support implements a workaround that provides a performance boost over the traditional upstream workaround which ensures cache lines are exclusive on driver CPU using 'read for ownership'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> target/linux/cns3xxx/config-3.3 \| 2 +- target/linux/cns3xxx/patches-3.3/460-cns3xxx_fiq_support.patch \| 9 ++++----- 2 files changed, 5 insertions(+), 6 deletions(-) SVN-Revision: 33827	2012-10-17 22:03:37 +00:00
John Crispin	6993e19532	drop GPIODEV platform code SVN-Revision: 33825	2012-10-17 21:53:37 +00:00
Gabor Juhos	7a72f01a72	ar71xx: merge machine support patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33820	2012-10-17 18:27:50 +00:00
Gabor Juhos	2e1bc1e15b	ar71xx: also use the ath79_set_ar934x_eth_cfg helper for DB120 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33819	2012-10-17 18:27:48 +00:00
Gabor Juhos	31387947c8	ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33818	2012-10-17 18:27:47 +00:00
Gabor Juhos	5ffc08e3dc	ar71xx: add a helper function for setting up ETH_CFG register on AR934x Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33817	2012-10-17 18:27:45 +00:00
Gabor Juhos	35a91a4fe8	ar71xx: OM2P-HS sysupgrade support Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33803	2012-10-17 08:26:05 +00:00
Gabor Juhos	c5a32cfc92	ar71xx: add support for the OpenMesh OM2P-HS board Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33800	2012-10-17 08:26:01 +00:00
Florian Fainelli	254d851d8a	nuport-mac: various fixes - properly check for the link up condition in the phylib adjust callback - do not assign skb->dev, eth_type_trans() already does it - handle skb allocation failures in the refill path SVN-Revision: 33780	2012-10-15 21:03:57 +00:00
Florian Fainelli	60ecd5fe04	merge the RDC R-321x target as a subtarget of x86 SVN-Revision: 33779	2012-10-15 18:54:34 +00:00
Gabor Juhos	f1283d8583	ar71xx: fix sysupgrade for jjPlus JWAP003 [juhosg: change commit message] Signed-off-by: Artur Wronowski <arteqw@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33769	2012-10-14 16:24:26 +00:00
Gabor Juhos	1944f7b916	ar71xx: ew-dorin: added ethernet switch configuration Signed-off-by: embedded wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33768	2012-10-14 16:24:25 +00:00
Gabor Juhos	62ab2b0da6	ar71xx: unbreak building images for OpenMesh OM2P/OM2P-LC Commit r33248 introduced a regression by passing the board name plus 'board=' in the third argument. The board name string has to be put into the image as identifier of the image type. [juhosg: fix OpenMesh template instead of use of string substitution] Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33767	2012-10-14 16:24:22 +00:00
Florian Fainelli	e4bebad4f7	add Actiontec PK5000 LEDs Also share them between the GT701 and the PK5000. Patch from Daniel Gimpelevich. SVN-Revision: 33756	2012-10-13 17:47:45 +00:00
Florian Fainelli	d78371f5c0	vlynq: rework probing and clocking setup Handle the different vlynq device versions, and make the vlynq code more in line with the original vlynq implementation. Patch from Daniel Gimpelevich. SVN-Revision: 33755	2012-10-13 17:47:36 +00:00
Florian Fainelli	0f04f7479c	remove the squashfs alignement define Patch from Daniel Gimpelevich. SVN-Revision: 33754	2012-10-13 17:47:30 +00:00
Florian Fainelli	ec4e61e558	handle LOADER_MAGIC2 in ar7part This is required for Actiontec PK5000 devices. Path from Daniel Gimpelevich. SVN-Revision: 33753	2012-10-13 17:47:25 +00:00
Florian Fainelli	e5a65db1b5	increase the flash resource size to its maximum value CFI detection will reduce the resource size to its real value. Patch from Daniel Gimpelevich. SVN-Revision: 33752	2012-10-13 17:47:20 +00:00
Florian Fainelli	7205421c5b	reinstate the fixed PHY fallback for devices with undetectable switches At least devices without a switch present on the MDIO bus still get a valid link and work as expected (such as the Linksys WAG54Gv2). SVN-Revision: 33751	2012-10-13 17:47:14 +00:00
Florian Fainelli	3794a6a9dd	enable mvswitch driver And fix the default network configuration to create the required VLANs. Patch from Daniel Gimpelevich. SVN-Revision: 33750	2012-10-13 17:47:09 +00:00
Florian Fainelli	99598d2473	use the second available LED to encore mode boot states Patch from Daniel Gimpelevich. SVN-Revision: 33749	2012-10-13 17:47:04 +00:00
Florian Fainelli	31c324f451	use wpad-mini instead of hostapd SVN-Revision: 33744	2012-10-13 17:46:32 +00:00
Imre Kaloz	c24df51736	add support for new Option modules (GTM66xxWFS/GTM67xxWFS) Add new device ID's for the hso driver as well as usb storage Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33743	2012-10-13 06:58:42 +00:00
Jo-Philipp Wich	4cfd3dc8ed	x86/kvm_guest: enable PCIE support SVN-Revision: 33741	2012-10-12 16:51:31 +00:00
Florian Fainelli	e7b2a4170c	copy initramfs kernel to bin directory SVN-Revision: 33726	2012-10-11 15:45:24 +00:00
John Crispin	ba6751058b	gpiodev/gpioctl RIP SVN-Revision: 33725	2012-10-11 11:58:09 +00:00
Imre Kaloz	88a740ff80	fix (really this time) laguna UART config Properly terminate the correct platform resource for laguna UARTs Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33721	2012-10-11 09:51:35 +00:00
Imre Kaloz	9b22ca8042	The Gateworks System Controller (GSC) is an i2c device that provides system level monitoring and control of Gateworks boards. It is used on several product families spanning several different target architectures (ixp4xx, cns3xxx, davinci). Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33720	2012-10-11 07:59:06 +00:00
Imre Kaloz	31c2f1a4d2	fix non terminated uart resources for laguna Resolves crashes when probing multiple serial devices Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33719	2012-10-11 07:47:27 +00:00
Florian Fainelli	bc3b111cfd	generate vmlinux.srec and vmlinux.bin from srec2bin Useful for loading the kernel into RAM using ADAM2/PSPBoot. SVN-Revision: 33718	2012-10-11 06:45:07 +00:00
Felix Fietkau	d0ec348ded	kernel: fq_codel: dont reinit flow state Keep fq_codel flow state around after queue empty. SVN-Revision: 33687	2012-10-10 11:54:31 +00:00
Felix Fietkau	f933719138	kernel: dont delay acks after ECN CE Bugfix from linux head - don't delay acks from ECN congestion experienced in some situations. SVN-Revision: 33686	2012-10-10 11:54:27 +00:00
Felix Fietkau	85871f283a	cns3xxx: Fix GPIO configuration for Gateworks Laguna boards The Laguna boards do not use all the same pins for SDHCI as the Cavium reference board. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33684	2012-10-10 11:39:02 +00:00
Felix Fietkau	6bb7409e5a	cns3xxx: Fix laguna arm11mpcore watchdog The ARM11MPCore Timer/Watchdog registers start at offset 0x600 which is where all mpcore-wdt boards point the driver base too. I believe this is wrong because 0x600 is aliased to the timer/watchdog of the 'current CPU' where 0x700 is CPU0's timer/watchdog, and 0x800 is CPU1's timer/watchdog. Thus if your timer/watchdog application is switching between CPU's it can end up writing to the wrong CPU's registers which results in random board resets from watchdog timeouts etc. This patch forces the timer/watchdog driver to use CPU0's registers always. Its my opinion that other mpcore-wdt boards should be doing the same thing. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33683	2012-10-10 11:38:58 +00:00
Felix Fietkau	f570c806ef	mtd: allow partial block unlock This allows sysupgrade for devices such as the Gateworks Avila/Cambria product families based on the ixp4xx using the redboot bootloader with combined FIS directory and RedBoot config partitions on larger FLASH devices with larger eraseblocks. This second iteration of this patch addresses previous issues: - whitespace breakage fixed - unlock in all scenarios - simplification and fix logic bug Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33681	2012-10-10 11:38:44 +00:00
Felix Fietkau	cae6f4ddb4	ixp4xx: enable OPTIMIZE_FOR_SIZE Enabling OPTIMIZE_FOR_SIZE cuts the kernel binary down by 50K which is critical for some small-footprint boards. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33679	2012-10-10 11:38:28 +00:00
Felix Fietkau	f14b8d43f2	ixp4xx: add missing reboot handlers (fixes #11577 ) SVN-Revision: 33672	2012-10-09 15:38:55 +00:00
Felix Fietkau	856fba88d9	x86: remove the reboot=bios command line parameter (#12193 ) SVN-Revision: 33671	2012-10-09 15:20:11 +00:00
Jonas Gorski	fbe0af3237	bcm63xx: remove bcm_tag usage in kernel Fixes #12292. SVN-Revision: 33670	2012-10-09 08:08:49 +00:00
Jonas Gorski	6a000ba37a	bcm63xx: fix 963281TAN image names it's a 6328, not a 6348. SVN-Revision: 33665	2012-10-08 13:08:40 +00:00
Jonas Gorski	997ace7e5e	firmware-utils: move bcm_tag.h here Since there is only one user of bcm_tag.h left, we can safely move it into the firmware-utils directory, replacing the symlink. SVN-Revision: 33655	2012-10-08 09:59:50 +00:00
Jonas Gorski	f16ea6be3f	bcm63xx: fix entering failsafe through button gpio_keys_polled needs to be loaded in preinit for buttons to work for entering failsafe. SVN-Revision: 33653	2012-10-08 09:59:44 +00:00
Felix Fietkau	e5bb1a1bc7	cns3xxx: add sysupgrade support Signed-off-by: Tim Harvey <tharvey@gateworks.com> target/linux/cns3xxx/base-files/lib/cns3xxx.sh \| 22 ++ target/linux/cns3xxx/base-files/lib/upgrade/platform.sh \| 122 ++++++++++++++++ target/linux/cns3xxx/image/Makefile \| 19 +- 3 files changed, 159 insertions(+), 4 deletions(-) SVN-Revision: 33650	2012-10-07 23:24:02 +00:00
Felix Fietkau	68449e2e01	cns3xxx: add GW2383 board support Add GPIO/LED support for Gateworks GW2383 Signed-off-by: Tim Harvey <tharvey@gateworks.com> target/linux/cns3xxx/patches-3.3/300-laguna_support.patch \| 18 +++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) SVN-Revision: 33649	2012-10-07 23:23:58 +00:00
Felix Fietkau	6b778f57aa	cns3xxx: fix gpio access and add gpio IRQ support Signed-off-by: Tim Harvey <tharvey@gateworks.com> target/linux/cns3xxx/patches-3.3/470-gpio_irq.patch \| 536 ++++++++++++++++++++ 1 file changed, 536 insertions(+) SVN-Revision: 33648	2012-10-07 23:23:52 +00:00
Felix Fietkau	bca070dfbe	ixp4xx: update Gateworks Avila board support Several new features for newer boards: - add additional UARTs present on some boards - add additional LEDs present on some boards - add HSS audio device codec present on some boards - add support for GSC present on some boards - add per model setup support for newer boards - set FLASH window per-model for boards with larger FLASH Some fixes: - add IRQ mapping for additional PCI devices (USB Host) Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33647	2012-10-07 23:23:47 +00:00
Felix Fietkau	22b86fec7c	ixp4xx: patch cleanup roll all avila patches into a single patch (no code changes) Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33646	2012-10-07 23:23:43 +00:00
Felix Fietkau	d660734a1b	ixp4xx: Add HSS audio driver for Avila product family Add ixp4xx HSS audio driver for Avila Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33645	2012-10-07 23:23:39 +00:00
Felix Fietkau	ce692ed043	ixp4xx: update Gateworks Cambria board support Several new features for newer boards: - add irq mapping for additional devices - add platform data for i2c bus to SFP modules - add additional UARTs present on some boards - increased R/W delay for expansion bus UARTs - add additional LEDs present on some boards - add GPIO exports and configuration - add ENET switch config present on some boards - add support for GSC present on some boards - added per model setup support for newer boards Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33644	2012-10-07 23:23:34 +00:00
Felix Fietkau	21d182b9e5	ixp4xx: patch cleanup roll all cambria patches into a single patch (no code changes) Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33643	2012-10-07 23:23:29 +00:00
Felix Fietkau	d3567cc886	ixp4xx: split out new UART I/O to its own patch This is being done for general cleanup Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33642	2012-10-07 23:23:25 +00:00
Felix Fietkau	1abbe676d1	x86: rename the iso file to openwrt-x86-generic.iso SVN-Revision: 33641	2012-10-07 23:05:39 +00:00
Felix Fietkau	0dd7644ec7	x86: remove grub-legacy SVN-Revision: 33640	2012-10-07 23:01:56 +00:00
Felix Fietkau	a1bcd25082	x86: add grub2 iso support SVN-Revision: 33639	2012-10-07 23:01:52 +00:00
Felix Fietkau	53cc34e517	x86/generic: enable cdrom + iso9660 support SVN-Revision: 33638	2012-10-07 23:01:47 +00:00
Gabor Juhos	befb648642	ar71xx: build image for the TL-WR841N/ND v8 SVN-Revision: 33623	2012-10-04 20:16:06 +00:00
Gabor Juhos	02a85dfd85	ar71xx: user-space support for TL-WR841N/ND v8 SVN-Revision: 33622	2012-10-04 20:16:05 +00:00
Gabor Juhos	196c6c5b45	ar71xx: add support for the TL-WR841N/ND v8 board SVN-Revision: 33621	2012-10-04 20:16:03 +00:00
Hauke Mehrtens	07234dc8bd	bcma: do not initialize deactivated PCIe cores Before it was tried to initialize the deactivated PCIe core in client mode, but this causes the SoC to hang. Just do not initialize it at all and ignore the core it is not working and nothing is connected to it when the specific bit is set in the boardflags. SVN-Revision: 33620	2012-10-04 15:45:54 +00:00
Hauke Mehrtens	2819890839	use memcmp in mem size detection as suggested by blogic SVN-Revision: 33619	2012-10-04 15:42:12 +00:00
Florian Fainelli	5e0df9582b	fix typo in 05_set_ether_mac_rdc preinit script (#11166 ) SVN-Revision: 33618	2012-10-04 12:36:50 +00:00
Gabor Juhos	d832cd11f8	ramips: add image for ALL0256N-8M The new version of the ALL0256N now got 8MB SPI NOR flash instead of 4MB. In order to expose the whole amount of flash, add another image which contains the corresponding GENERIC_8M mtdparts. [juhosg: change suffix from '8m' to '8M'] Patch by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33614	2012-10-04 06:34:09 +00:00
Florian Fainelli	47c5c4df1c	add Default and Gumstix PXA profiles Gumstix builds a fake flash image for usage in qemu SVN-Revision: 33609	2012-10-03 16:15:05 +00:00
Florian Fainelli	48daf407a6	advertise jffs2 feature SVN-Revision: 33607	2012-10-03 16:12:57 +00:00
Florian Fainelli	bb7ac8ae7d	remove broken flag SVN-Revision: 33606	2012-10-03 16:12:39 +00:00
Florian Fainelli	8f44ba1ae2	fix build with latest gpiolib changes SVN-Revision: 33605	2012-10-03 16:12:03 +00:00
Florian Fainelli	d504b6251c	more convertions to {read,write}_relaxed I/O accessors SVN-Revision: 33604	2012-10-03 16:10:47 +00:00
Felix Fietkau	a2e1dce829	cns3xxx: add missing kernel config symbol SVN-Revision: 33603	2012-09-30 15:31:34 +00:00
Hauke Mehrtens	9f083117d1	refresh patches SVN-Revision: 33602	2012-09-30 11:45:53 +00:00
Hauke Mehrtens	642fe7f10a	bcma: use fallback sprom if sprom on card was not valid Sometimes the PCIe card indicates that it has a sprom somewhere and we are able to read the memory region, but it is empty and not valid. In these cases we should try to use the fallback sprom as a last chance. SVN-Revision: 33601	2012-09-30 11:45:31 +00:00
Hauke Mehrtens	42952fd94f	bcma: initialize sprom earlier The chip common and the PCIe code are accessing the sprom struct which is not filled when these cores are initialized. Fix this by adding an early initialize and fill the sprom struct before accessing it in other code. SVN-Revision: 33600	2012-09-30 11:44:44 +00:00
Hauke Mehrtens	2d40590a23	run make kernel_oldconfig SVN-Revision: 33599	2012-09-30 11:44:04 +00:00
Hauke Mehrtens	e5eefed084	ignore the last page on bcma based SoCs SVN-Revision: 33598	2012-09-30 11:43:40 +00:00
Hauke Mehrtens	c9feffc332	Fix reading sprom from nvram without a prefix The bcma based SoCs with a ieee80211 core on the SoC and an other connected via PCIe or USB store the sprom for the SoC with a sb/1/ prefix. The SoC with just one wifi core do not use prefixes. The BCM4706 do not use a prefix for the SoC part at all, because the prefix is the path to the ieee80211 core and there is non on the BCM4706. SVN-Revision: 33597	2012-09-30 11:43:13 +00:00
Hauke Mehrtens	4d5c75a54e	improve the check for the memory size This will hopefully fix bug #9360 and #9097 in trunk. SVN-Revision: 33596	2012-09-30 11:42:16 +00:00
John Crispin	f3cab53f27	dont explicitly select wireless-tools. rely on the drivers that need them to have the right dependency SVN-Revision: 33593	2012-09-28 21:54:31 +00:00
John Crispin	0afc7b9b6d	add support for adm6996 phy SVN-Revision: 33592	2012-09-28 21:38:02 +00:00
John Crispin	9dc218f88f	tapi was not registeredproperly for most arcadyan boards SVN-Revision: 33591	2012-09-28 20:57:06 +00:00
Imre Kaloz	c53936bb4b	Add FIQ support for cns3xxx Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33581	2012-09-28 17:35:35 +00:00
Imre Kaloz	2f2115c436	Update board support for Gateworks Laguna Product family Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33580	2012-09-28 17:34:18 +00:00
Imre Kaloz	70729bb4a5	USB iso mode fixes Resolves an issue where isochronouse USB would cause the driver to hang as well as scheduling issues. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33579	2012-09-28 17:31:22 +00:00
Gabor Juhos	170cd7a19a	ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac SVN-Revision: 33575	2012-09-27 20:05:42 +00:00
Gabor Juhos	a0df3fa315	generic: enable CONFIG_USB_EHCI_TT_NEWSCHED This feature was experimental in old kernels but that flag has been removed in 2.6.36. Additionally, the option is enabled by default since then. See: http://www.spinics.net/lists/linux-usb/msg31993.html SVN-Revision: 33574	2012-09-27 20:05:39 +00:00
Gabor Juhos	e3bcbeb427	ramips: add memory detection code for RT5350 SVN-Revision: 33571	2012-09-27 10:18:15 +00:00
Gabor Juhos	80d2da9f0f	ramips: allow to use custom code for memory size detection SVN-Revision: 33570	2012-09-27 10:18:14 +00:00
Florian Fainelli	4ea68a13e3	include sys/resource.h in arch/um/os-Linux/start_up.c (#12155 ) Required for recent (e)glibc systems SVN-Revision: 33569	2012-09-27 09:21:01 +00:00
Imre Kaloz	68f8db6731	fix ncores for single-core systems. For cns3xxx SCU_CONFIGURATION always shows multipe cores but SCU_CPU_STATUS shows which ones are active. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33566	2012-09-27 08:07:17 +00:00
Imre Kaloz	9ace6ace8f	add i2c retries Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33565	2012-09-27 08:06:13 +00:00
Imre Kaloz	7dd6b04c28	fix pcie abort handling Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33564	2012-09-27 08:05:19 +00:00
Florian Fainelli	caf900f0e4	remove kmod-spi-bitbang This is no longer a dependency of kmod-spi-bcm63xx SVN-Revision: 33562	2012-09-26 20:11:37 +00:00
Gabor Juhos	579e9cded8	generic: add upstream commit id to codel patches and refresh those SVN-Revision: 33560	2012-09-26 14:17:17 +00:00
Florian Fainelli	eb97933e2a	backport the upstream entropy changes (#11951 ) SVN-Revision: 33559	2012-09-26 12:54:01 +00:00
Florian Fainelli	4a67ccb163	get rid of the IRQF_SAMPLE_RANDOM flag SVN-Revision: 33558	2012-09-26 12:53:58 +00:00
Florian Fainelli	c27c0d1ff0	add wmbus-repeater to the dLAN USB Extender profile SVN-Revision: 33556	2012-09-25 20:56:50 +00:00
Florian Fainelli	c7cf4def64	enable multicast and advanced ip routers configs SVN-Revision: 33555	2012-09-25 20:53:34 +00:00
Florian Fainelli	d95f612340	add kmod-usb-serial-ftdi to the dLAN USB Extender profile SVN-Revision: 33554	2012-09-25 20:50:20 +00:00
John Crispin	d8c04821c3	make uci-defaults switch detection work on rt5350 SVN-Revision: 33549	2012-09-25 14:47:18 +00:00
John Crispin	34d57ebd8b	add ethernet support for rt5350 SVN-Revision: 33548	2012-09-25 14:47:08 +00:00
John Crispin	af0cd76937	make ramips ethernet use a register mapping table SVN-Revision: 33547	2012-09-25 14:46:58 +00:00
Hauke Mehrtens	0818180715	activate failsafe on all ports of the switch and not just port 0. Sometimes the port 0 was the WAN port or there could be some device where the port 0 is not wired to an actual Ethernet port. Now telnet in failsafe will listen on all ports of the switch so user do not have to search for the correct port any more. This change will make the switch leak traffic between the WAN and the LAN port, but you should not use failsafe while connected to a untrusted network. SVN-Revision: 33544	2012-09-25 14:04:59 +00:00

... 6 7 8 9 10 ...

9655 commits