KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
33381 commits 3 branches 0 tags 154 MiB
Commit graph

33381 commits

This branch
This branch
All branches
Author SHA1 Message Date
Felix Fietkau
cbb1227c4c iw: add VHT80 support for 802.11s 
Support next to the non-HT/HT channel widths like HT20 or NOHT also VHT80
channels during the mesh join

    iw dev mesh0 mesh join "meshnet" freq 5180 80MHz

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 47782
 2015-12-05 09:52:18 +00:00
Felix Fietkau
028666e75f mac80211: Allow to select VHT80 in IBSS mode 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 47781
 2015-12-05 09:52:10 +00:00
Felix Fietkau
5425d27339 iw: add VHT80 support for IBSS 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 47780
 2015-12-05 09:52:02 +00:00
Felix Fietkau
9dd65e5493 iw: display interface TX power if available 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 47779
 2015-12-05 09:51:53 +00:00
Felix Fietkau
c9cb3f4d1c iw: sync nl80211.h with compat-wireless 2015-10-26 
Fix the id of NL80211_ATTR_WIPHY_ANTENNA_GAIN for antenna_gain command when
using compat-wireless 2015-10-26.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 47778
 2015-12-05 09:51:48 +00:00
Felix Fietkau
a86a5699d9 iw: update to version 4.3 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 47777
 2015-12-05 09:51:39 +00:00
Felix Fietkau
8d580cd7f2 mac80211: Allow enabling tracing for the drivers that support it 
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 47776
 2015-12-05 09:51:35 +00:00
Felix Fietkau
9ca1080e92 busybox: Update config for 1.24.1 
r47288 updated to Busybox 1.24.1 but did not update the configuration.

The configuration is updated by running

cd config
../convert_menuconfig.pl .../build_dir/target-*/busybox-1.24.1
cd ..
./convert_defaults.pl < .../build_dir/target-*/busybox-1.24.1/.config > \
    Config-defaults.in

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 47775
 2015-12-05 09:51:30 +00:00
Felix Fietkau
fff859a1f6 lantiq: remove 3.18 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47774
 2015-12-05 09:51:25 +00:00
Felix Fietkau
ba0ba1e1f5 mac80211: enable build with linux 4.4 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47772
 2015-12-04 22:40:38 +00:00
Felix Fietkau
70ac77f869 mac80211: update to 2015-12-03 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47771
 2015-12-04 22:39:37 +00:00
Felix Fietkau
8b30afb005 lantiq: fix a race condition in the SPI driver leading to rx FIFO overflows (and subsequent timeouts) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47770
 2015-12-04 20:26:22 +00:00
Felix Fietkau
7516989383 lantiq: debloat the ltq-vdsl-app binary 
Use the 'typical' compile configuration instead of 'full', which most
notably excludes the soap support.

/sbin/vdsl_cpe_control shrinks down to ~50%, from 178kb(!) to 90kb.

Signed-off-by: Andre Heider <a.heider@gmail.com>

SVN-Revision: 47769
 2015-12-04 20:26:17 +00:00
Felix Fietkau
9330296932 lantiq: re-enable spi-xway for TD-W89X0 now that it is fixed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47768
 2015-12-04 18:35:20 +00:00
Felix Fietkau
b963cec01c lantiq: fix xway spi driver timeout issues 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47767
 2015-12-04 18:35:12 +00:00
Felix Fietkau
ae10274239 lantiq: clean up the xrx200 ethernet driver and fix stability issues 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47766
 2015-12-04 17:44:06 +00:00
Felix Fietkau
1d1265b40b br2684ctl: convert init script to procd, add hotplug/reload support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47765
 2015-12-04 17:44:00 +00:00
Felix Fietkau
435e7fb295 lantiq: move esi calls to dsl_cpe_control scripts to fix ordering wrt. loading vr9 drivers 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47764
 2015-12-04 17:42:51 +00:00
Jo-Philipp Wich
cc59f31e44 ar71xx: convert gpio switch config to board.d 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47763
 2015-12-04 15:02:42 +00:00
Jo-Philipp Wich
08078df83d board.d: add support for gpio_switch sections 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47762
 2015-12-04 15:02:32 +00:00
Jo-Philipp Wich
ba8a44995f mcs814x: switch from uci-defaults to board.d 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47761
 2015-12-04 15:02:13 +00:00
Jo-Philipp Wich
8298dfef5c sunxi: fix board.d permissions 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47760
 2015-12-04 14:39:20 +00:00
Jo-Philipp Wich
2f042b452e orion: convert initial network configuration to board.d 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47759
 2015-12-04 14:39:14 +00:00
Jo-Philipp Wich
b6a9c5c400 sunxi: switch from uci-defaults to board.d 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47758
 2015-12-04 14:32:52 +00:00
Jo-Philipp Wich
ca00bd2be4 ar7: switch from uci-defaults to board.d 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47757
 2015-12-04 14:27:47 +00:00
Jo-Philipp Wich
1e4478e83a ath25: switch from uci-defaults to board.d 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47756
 2015-12-04 14:15:09 +00:00
Jo-Philipp Wich
5ebc5de49d lantiq: switch from uci-defaults to board.d 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47755
 2015-12-04 12:32:44 +00:00
Jo-Philipp Wich
708c0212e7 brcm63xx: switch from uci-defaults to board.d 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Acked-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 47754
 2015-12-04 12:32:36 +00:00
Jo-Philipp Wich
08848936dd all: remove redundant board.d/00_model files 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47753
 2015-12-04 11:07:06 +00:00
Jo-Philipp Wich
61a99da4f9 base-files: board.d: auto-set model id and name if /tmp/sysinfo is available 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47752
 2015-12-04 11:06:57 +00:00
Jonas Gorski
f961a3826e kernel: drop bridge hack for removing ipv6 dependency 
Now that IPV6 isn't build as a module anymore, we don't need to decouple
bridge from ipv6 anymore.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 47751
 2015-12-04 10:06:03 +00:00
Jo-Philipp Wich
6c8daa6ba3 base-files: board.d: support dsl modems, atm bridges and pppoe protocol 
This adds support for specifying the dsl modem, atm bridge configs and setting
the pppoe protocol for wan.

These additions are required to port the Lantiq target to board.d.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47750
 2015-12-04 09:56:55 +00:00
Jonas Gorski
813227d992 kernel: mvswitch: merge 3.10+ compile fix into the code 
The lowest we support is 3.18, so no need to keep it as a separate
patch.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 47749
 2015-12-04 09:45:07 +00:00
Rafał Miłecki
304c3411ba kernel: drop unneeded modification of mtd_add_partition function 
In old days mtd_add_partition was checking for partitions overlapping
which was breaking our splitting feature. We had to modify this function
by adding an extra bool dup_check parameter. Upstream commit:
3a434f66e6da ("mtd: part: Remove partition overlap checks")
removed that check so we don't need our modification anymore.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47748
 2015-12-04 09:33:08 +00:00
Rafał Miłecki
416243107b kernel: drop old uimage splitter from 4.4 
For a long time we have a dedicated firmware splitter for uimage as a
replacement for the one builtin into mtd subsystem. For a year we got a
proper warning for users sticking to the old one (r43700). It should be
really safe to drop it now, especially since we do it for 4.4 only.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47747
 2015-12-04 09:33:04 +00:00
Jo-Philipp Wich
03292739e0 malta: board.d: fix typo 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47746
 2015-12-04 09:05:43 +00:00
Jo-Philipp Wich
296212c301 kirkwood: add missing board_config_flush(), remove dead code 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47745
 2015-12-03 23:13:04 +00:00
Jo-Philipp Wich
527ec2af59 all: remove dummy ucidef_set_interface_loopback() from board.d 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47744
 2015-12-03 23:13:00 +00:00
Jo-Philipp Wich
3348308afd arc770: switch from uci-defaults to board.d 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47743
 2015-12-03 23:08:02 +00:00
Jo-Philipp Wich
dc4b0037ab mxs: convert from uci-defaults to board.d 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47742
 2015-12-03 23:07:53 +00:00
Jo-Philipp Wich
60dbff6a5f malta: switch from uci-defaults to board.d 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47741
 2015-12-03 23:07:46 +00:00
Jo-Philipp Wich
81f1ccbf96 at91: switch from uci-defaults to board.d 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47740
 2015-12-03 23:07:38 +00:00
Jo-Philipp Wich
adbe47380e realview: switch from uci-defaults to board.d 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47739
 2015-12-03 23:07:30 +00:00
Jo-Philipp Wich
7cf1ff8a75 imx6: switch from uci-defaults to board.d 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47738
 2015-12-03 23:07:20 +00:00
Jo-Philipp Wich
57014a284f netlogic: fix typo, copyright in board.d script 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47737
 2015-12-03 23:06:57 +00:00
Jo-Philipp Wich
99cf19dfc2 netlogic: switch from uci-defaults to board.d 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47736
 2015-12-03 22:46:54 +00:00
Jo-Philipp Wich
80a3e65a9d kirkwood, ipq806x: fix board.d script permissions 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47735
 2015-12-03 22:42:13 +00:00
Jo-Philipp Wich
21ea086bd3 octeon: switch from uci-defaults to board.d 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47734
 2015-12-03 22:42:09 +00:00
Jo-Philipp Wich
7514b6d73b kirkwood: switch from uci-defaults to board.d 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47733
 2015-12-03 22:27:18 +00:00
Jo-Philipp Wich
f611358870 base-files: board.d: support specifiying the protocol of lan and wan 
Some boards, e.g. the Sheeva Plug, require the lan interface to be set
to DHCP instead of a static address, therfore support that.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47732
 2015-12-03 22:27:06 +00:00