Commit graph

5807 commits

Author SHA1 Message Date
Michael Büsch
65f47378d7 omap24xx: Update to 2.6.36-rc6
SVN-Revision: 23157
2010-09-30 09:50:04 +00:00
Alexandros C. Couloumbis
d328e72247 linux/ixp4xx: fix an embracing mistake on commit r23150 (thank you KanjiMonster)
SVN-Revision: 23153
2010-09-29 15:09:07 +00:00
Alexandros C. Couloumbis
76e0ff33de linux/ixp4xx: sync 2.6.36 patches to 2.6.36-rc6
SVN-Revision: 23150
2010-09-29 13:50:16 +00:00
Felix Fietkau
8511c6b16c AP96: Fix LAN/WAN setup
LAN (eth0) is behind a switch and the fixed speed/duplex was
supposed to be for it, not WAN (eth1).

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

SVN-Revision: 23147
2010-09-28 22:55:14 +00:00
Lars-Peter Clausen
8314ce02cc Fix mv_cesa module dependencies and .ko file location Thanks KanjiMonster & Memphiz
SVN-Revision: 23145
2010-09-28 16:32:08 +00:00
Gabor Juhos
2fdc8aea04 ar71xx: build firmware image for the TL-MR3420 v1 board
SVN-Revision: 23138
2010-09-27 14:54:04 +00:00
Gabor Juhos
32d12d5e5c ar71xx: add support for the TL-MR3420 v1 board
SVN-Revision: 23136
2010-09-27 14:53:59 +00:00
Gabor Juhos
b831ebdde9 ar71xx: AR724[12] requires different USB setup
SVN-Revision: 23135
2010-09-27 14:53:57 +00:00
Gabor Juhos
ef54e93712 ar71xx: build firmware image for the TL-WR841N v7
SVN-Revision: 23134
2010-09-27 14:53:54 +00:00
Gabor Juhos
cda8655910 ar71xx: use the MDIO interface of the 2nd MAC on the ar7241
SVN-Revision: 23132
2010-09-27 14:53:49 +00:00
Gabor Juhos
b445943cdf ar71xx: move ath9k specific PCI fixup into a separate file
SVN-Revision: 23131
2010-09-27 14:53:46 +00:00
Gabor Juhos
4ae167959b ar71xx: use different address in ap91_pci_fixup for the AR724[012] SoCs
With this change ath9k can handle the wireless chip on the TL-WR841N v7
board which is based on the AR7241 SoC.

SVN-Revision: 23130
2010-09-27 14:53:43 +00:00
Gabor Juhos
e5b081335e ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)
The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).

Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>

SVN-Revision: 23129
2010-09-27 14:43:34 +00:00
Gabor Juhos
39c57eeb31 ramips: allow USB
The current defaults for ramips rt305x does not allow the USB
subsystem to be selected/built.

This patch is just a small step in that direction.

Signed-off-by: Luis Correia <luis.f.correia@gmail.com>

SVN-Revision: 23128
2010-09-27 14:42:07 +00:00
Gabor Juhos
dc4df4ca65 generic: RTL8366S/RB: Fix autonegotiation for the WAN port.
The RTL8366S/RB support connecting a second mac to it and using the 5th
port as an independent phy. Therefore we need to handle autonegotiation
changes for phy 4 like on a single phy device.

This fixes #7980, verified on a WNDR3700.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 23127
2010-09-27 14:42:05 +00:00
Gabor Juhos
5721f06fe1 generic: add rtl8366rb switch port rate, port and qos enable/disable support
Patch-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 23126
2010-09-27 14:41:54 +00:00
Felix Fietkau
a7bb7dd99e Add support for Atheros AP96 reference board
This is still preliminary and not really tested much. Anyway, this
version seems to be enough to get both wired and wireless
interfaces working. Buttons and leds are also working.

mach-ap96.c is based on mach-wndr3700.c.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

SVN-Revision: 23125
2010-09-27 08:59:53 +00:00
Michael Büsch
a41b1df07b omap24xx fb: Do not omit init
SVN-Revision: 23123
2010-09-26 22:03:18 +00:00
Michael Büsch
da53a6d635 omap24xx: Upgrade to linux-2.6.36-rc5
SVN-Revision: 23121
2010-09-26 12:53:23 +00:00
Michael Büsch
cde47c9958 omap24xx: Export certain n8x0 GPIO switches as input device
SVN-Revision: 23120
2010-09-26 12:50:53 +00:00
Felix Fietkau
19723d09c2 x86: turn on optimizations for net5501 (patch by Philip A. Prindeville)
SVN-Revision: 23104
2010-09-20 22:14:07 +00:00
Michael Büsch
a2ca27e237 omap24xx cbus: fix ioctls
SVN-Revision: 23083
2010-09-18 18:14:17 +00:00
Michael Büsch
1e3c230596 omap24xx: Add n8x0 specific GPIO switch code
SVN-Revision: 23082
2010-09-18 17:58:30 +00:00
Michael Büsch
581f65334b omap24xx: Add support for GPIO switches on the n810
SVN-Revision: 23081
2010-09-18 17:31:00 +00:00
Michael Büsch
ab5d942622 omap24xx: Update 2.6.36 config
SVN-Revision: 23074
2010-09-15 19:15:52 +00:00
Michael Büsch
e4e278d82a omap24xx: Add 2.6.36 support
SVN-Revision: 23072
2010-09-15 17:45:10 +00:00
Gabor Juhos
a07788ae63 generic: add support for the EON EN25F32 flash chip
* based on a patch by laigor <laigor@mail.ru> from #7882

SVN-Revision: 23058
2010-09-14 12:03:01 +00:00
Jo-Philipp Wich
7ec18378a7 add kvm_guest to subtarget list
SVN-Revision: 23056
2010-09-13 17:00:37 +00:00
Florian Fainelli
bbca651e1b remove wpa-supplicant and iw from the Tecom GW6x00 profile
SVN-Revision: 23051
2010-09-13 08:30:35 +00:00
Alexandros C. Couloumbis
a9f54bfd51 linux/generic: update patches for 2.6.36-rc4
SVN-Revision: 23047
2010-09-13 07:24:53 +00:00
Alexandros C. Couloumbis
7328f794bb linux/generic: update mini_fo evict_inode migration
SVN-Revision: 23046
2010-09-13 07:22:39 +00:00
Alexandros C. Couloumbis
6a5618187e linux/generic: semi-revert squashfs 2.6.36 changes until lzma code gets ready for mainlin inclusion
SVN-Revision: 23045
2010-09-13 07:21:38 +00:00
Florian Fainelli
d3e206ad96 default to using 2.6.35
SVN-Revision: 23038
2010-09-12 21:23:53 +00:00
Florian Fainelli
dc1302fdf9 remove 2.6.33 support
SVN-Revision: 23037
2010-09-12 21:23:47 +00:00
Florian Fainelli
327ac42dca change the Tecom GW6x00 profile to use wl instead of b43
SVN-Revision: 23036
2010-09-12 21:23:41 +00:00
Florian Fainelli
f4f789f211 register udc and spi devices at the correct init level
SVN-Revision: 23035
2010-09-12 21:23:35 +00:00
Florian Fainelli
fab2e77357 refresh 2.6.35 patches
SVN-Revision: 23034
2010-09-12 21:23:29 +00:00
Florian Fainelli
ed008fe1e8 refresh 2.6.35 patches
SVN-Revision: 23033
2010-09-12 21:23:15 +00:00
Jo-Philipp Wich
21fe52a736 override ARCH_PACKAGES
SVN-Revision: 23031
2010-09-12 20:50:53 +00:00
Jo-Philipp Wich
af800676d5 override ARCH_PACKAGES
SVN-Revision: 23030
2010-09-12 20:50:38 +00:00
Michael Büsch
4b7536d3c7 omap24xx: Add default network config
SVN-Revision: 23004
2010-09-11 15:21:03 +00:00
Michael Büsch
f0813cd0f5 omap24xx: Add pointercal file
SVN-Revision: 23003
2010-09-11 15:04:21 +00:00
Michael Büsch
9b4aafb87e Refresh patch
SVN-Revision: 23000
2010-09-10 21:41:06 +00:00
Michael Büsch
7751eaf871 Allow receiving input events even if the X-server grabbed the device.
SVN-Revision: 22999
2010-09-10 21:40:12 +00:00
Jo-Philipp Wich
1cd4b50164 fix Dockstart default rdate interface in system config, reformat
SVN-Revision: 22975
2010-09-07 21:26:12 +00:00
John Crispin
72d4242263 extracted firmware files were generated with an incorrect umask
SVN-Revision: 22957
2010-09-06 16:34:45 +00:00
Hamish Guthrie
54f4dd5612 add package python-cjson to gumstix profile
SVN-Revision: 22956
2010-09-06 13:56:43 +00:00
Jo-Philipp Wich
7d045509fd adjust image defaults for KVM
SVN-Revision: 22950
2010-09-06 02:31:37 +00:00
Jo-Philipp Wich
8ce034b36a x86: add kvm_guest subtarget Add a KVM guest subtarget to the x86 target. Since VirtIO is the preferred I/O virtualization platform for kvm, this target expects it's root device to be /dev/vda.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 22944
2010-09-05 23:18:51 +00:00
Felix Fietkau
0c6653c6e2 ar71xx: select AR71XX_DEV_DSA when AR71XX_DEV_AP91_ETH is selected, do not select AR71XX_DEV_AP91_ETH for TL-WA901ND and TL-WR741ND
SVN-Revision: 22935
2010-09-05 16:17:06 +00:00