Add a Image/BuildDTB command that takes the path to an dts file and
applies the CPP using the default include directories, then uses dtc
to compile the dts as the specified output file.
Additional CPP and DTC flags can be supplied as additional arguments.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46389
To improve reproducibility, prevent the inclusion of timestamps
in the gzip header.
Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>
SVN-Revision: 46361
We do not support old kernel versions not generating modules.builtin
anymore, so assume it will always be present and check for modules
to be built in first.
This prevents old modules being packages up after changing the kernel
config to include them in the kernel without cleaning the kernel tree.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46182
Boot tested: http://pastebin.com/L6aAb9xj
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo:
update to 4.1 final
add patches added since submission
delete patches applied in later rcs
restore commit messages in 220-gc-sections and 304-mips_disable_fpu
fix 050-backport_netfilter_rtcache to match new API
update inlined dma ops with upstream changes
add missing config symbols
enabled CONFIG_MULTIUSER
update kmod defintions for 4.1
]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46112
ntf_redir_ipvX is part of NAT support, so they should be in the
appropriate nft-nat kmods. Since they depend on nf_nat_redirect,
nf_nat_redirect should be part of nf-nat, not ipt-nat.
Fixes nft-core gaining a missing dependency on nf_nat_redirect.ko.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46109
Make musl provide libssp_nonshared.a and make GCC link it unconditionally
if musl is used. This should be a no-op if SSP is disabled and seems to be
the only reliable way of dealing with SSP over all packages due to the mess
that is linkerflags handling in packages.
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46108
Hello,
I found out that in some rare cases grep can treat Makefile as a binary file. That happened to me on UTF-8 Gentoo if Makefile contained a character which was from extended ASCII table.
Without this patch the output of the grep command in the $(FILELIST) target is not valid (contains line "Binary file matches") and following commands fail to create feed index file.
Best Regards,
Martin Strbacka
Signed-off-by: Martin Strbacka <martin.strbacka@nic.cz>
SVN-Revision: 45966
Some kernel images need to be wrapped in a loader, which cannot be built
without a working toolchain.
Also, this speeds up the image builder run.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45836
This introduces a common macro to assemble the correct url templates to
avoid code duplication and have the feed config handling in a central place.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45799
Update kernel sources and refresh some patches.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45761
This is required to allow packages to ship libraries with a different API.
Previously the linker would favor the old shared libraries in STAGING_DIR
instead of the just compiled ones in PKG_BUILD_DIR.
Avoid that problem by clearing the package staging files right after
prepare.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45759
Output warnings through stderr to allow them to be easilier spotted
when building with V=w.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45746
As mkits.sh makes the -d argument optional, we'll make this same
argument optional in the MkFIT function as well.
With this change, MkFIT can be used both to generate FIT images with DT,
and without DT.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 45660
Most of the time, we want to make sure OpenWrt has been configured and
setup before start running make. However, in case of package/symlinks,
forcing prereq as a dependency creates multiple issues:
*when executed on a clean workspace, it will prompt for user input
and open a menuconfig window before executing the feeds command
*the only way around that is to provide a .config. However, the "prereq"
target would then run a "make defconfig", which will remove all the
packages in the .config but from external feeds, as feeds have not been
installed yet.
The only way to currently work around this, is to generate a fake config
by running "make defconfig", then "make package/symlinks", copy the real
config (which at this point disregards the previously generated config),
and run make defconfig again. Something like this:
make defconfig
make package/symlinks
cp real.config .config
make defconfig
This change is removing the need for the first defconfig, making the
process more logical for OpenWrt users using the package/symlinks target.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 45657
Linux 4.0 was released on 2014-04-12
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45559
it has been non-functional for years and caused numerous memleaks and
crashes for people that tried to enable it.
it has no maintained upstream source, and it does not look like it's
going to be fixed any time soon
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45423
CMAKE_ASM_COMPILER is automatically set to CMAKE_C_COMPILER by CMake, but
CMAKE_C_COMPILER_ARG1 is lost. This causes assembly builds to fail when ccache
is enabled (for example the package fastd on x86).
Fix this by explicitly defining CMAKE_ASM_COMPILER and CMAKE_ASM_COMPILER_ARG1.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 45119
Set it to the filesystem which is build. mktplinkfw need to know which filesystem
is used.
FILESYSTEM can be squashfs, jffs2-64k, ...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 44997
set DISABLE_NLS only if CONFIG_BUILD_NLS NOT set.
like DISABLE_IPV6 which depends on CONFIG_IPV6
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
SVN-Revision: 44930
Defining STAMP_CONFIGURED statically caused it not to reflect changes to
PKG_CONFIG_DEPENDS made after including package.mk, like the additional options
added by feeds.mk for all packages.
Furthermore, as STAMP_CONFIGURED_WILDCARD was already defined recursively, the
patsubst in its definition would never match, and in consequence, the stamps
were never removed. This caused packages not to be rebuilt when they should have
been.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44927
When enabling SSP_SUPPORT, a lot of packages fail during compile phase
with the following error:
Package X is missing dependencies for the following libraries:
libssp.so.0
This can be solved by adding an optional dependency on libssp to all
those packages, but as there are quite a few packages both in OpenWrt
core and in the package repository, it might make sense to add this
optional dependency to all non-kernel packages, instead of polluting
lots of package dependency lines with it.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 44911
also refresh generic patches for 3.14, 3.18, 3.19 and 4.0
targets might need a minor refresh as well, however, it looks
like everything still applies cleanly with occasional small
offsets.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44876
Split out kmods from ALL to make it easier to create local builds that
are compatible kmod-wise with releases.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44830
It's the eglibc packaging with a bit of spit-polishing. And testing. :-)
[blogic: merged glibc and eglibc into 1 and made eglibc a glibc variant]
Signed-off-by: Jeff Waugh <jdub@bethesignal.org>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44701
