Commit graph

373 commits

Author SHA1 Message Date
Felix Fietkau
7304510392 base-files: save /bin/mknod for sysupgrade
It is used on NAND devices in case hotplug is too slow

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-06 15:34:14 +01:00
Yousong Zhou
6f61d8511e base-files: export x86 platform upgrade functions to common.sh
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-05 11:09:14 +01:00
Rafał Miłecki
b522292405 base-files: add support for overlaying rootfs content
This adds support for install-overlay define. When used in package it
allows installing files to a special directory that gets copied to the
root when installing it.
It allows overwriting files provided by other packages.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-20 09:35:36 +01:00
Felix Fietkau
81b5e8e5d2 base-files: add a hint in sysupgrade that shows what to do when the image metadata check fails
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-04 11:41:49 +01:00
Jonas Gorski
48cfc826eb base-files: ignore failure of stopping services on removal
Packages that do a killall <cmd> with the same name as the init script
will fail the prerm step when the service isn't running. Do make them
removable without having to restart the service, ignore the return code.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
2016-11-21 18:40:15 +01:00
Jonas Gorski
afaa34ccd7 base-files: don't modify enabled state of service on upgrade
Properly stop/start services on upgrade, but don't change the enabled
state.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
2016-11-21 18:40:15 +01:00
Felix Fietkau
cc853810a4 base-files: validate metadata of sysupgrade images
Use fwtool to extract it, only require metadata to be present if the
platform sysupgrade script sets REQUIRE_IMAGE_METADATA=1

Image metadata is in JSON format and contains a list of supported
devices, along with version information that could be displayed by a UI
later before the actual upgrade happens.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-19 11:24:09 +01:00
Jo-Philipp Wich
5e0441aaf0 base-files: uci-defaults: support requesting untagged switch port configuration
Introduce support for a new [0-9]u@netdev syntax to ucidev_add_switch() to let
board.d network files request default network switch configurations which do
not use tagged CPU ports.

This commit itself has no effect on generated configurations at the moment
since we still emit untagged configurations by default but it allows boards to
opt-out from default tagged configs in case we start emitting tagged settings
by default.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-02 01:06:29 +01:00
André Valentin
783875f18b package/basefiles: add mkfs.ext4 and losetup binaries to ramfs list
mkfs.ext4 und losetup are needed for sysupgrade support on mmc devices
with automatic rootfs split (loopback device usage).

Signed-off-by: André Valentin <avalentin@marcant.net>
2016-10-26 12:37:47 +02:00
Rafał Miłecki
2187f57db6 base-files: add ucidef_set_led_usbport for full usbport support
This helper allows using usbport trigger directly. It requires usbport
compatible syntax and supports specifying multiple USB ports, e.g.:
ucidef_set_led_usbport "usb" "USB" "devicename:colour:function" "usb1-port1" "usb2-port1"

This adds a proper object to the board.json, e.g.
"usb": {
	"name": "USB",
	"type": "usbport",
	"sysfs": "devicename:colour:function",
	"ports": [
		"usb1-port1",
		"usb2-port1"
	]
}
and supports translating it into uci section.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-22 11:16:01 +02:00
Matthias Schiffer
26b4216f95
base-files: make default_prerm work offline
IPKG_INSTROOT must be respected for offline removal (used for per-device
rootfs).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-09-26 17:57:57 +02:00
Jonas Gorski
30352e72ff base-files: set pi_ifname in board.d case to fix deconfig
Due to an empty pi_ifname in the generic failsafe setup, the deconfig
never removed the failsafe networking interface, causing broken
networking later on.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-14 23:10:17 +02:00
Jonas Gorski
6c9588ddf5 base-files: configure switch in failsafe
Also configure the switch based on the failsafe config, and create the
failsafe interface as tagged if necessary.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-13 15:50:15 +02:00
Jonas Gorski
072cf26729 base-files: allow failsafe to configure vlans
In preparation of properly setting up vlans and switches, add
support for configuring failsafe on a vlan tagged interface.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-13 15:50:06 +02:00
Jonas Gorski
c18edcec45 base-files: add preinit ifname detection based on board.json
Make use of the existing board.d to autodetect lan ifname in a generic way.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-13 15:50:00 +02:00
Jonas Gorski
0f1ae840c9 base-files: split out preinit interface config
Move preinit interface and ip config to its own function to allow
calling it from more than one place.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-13 15:49:56 +02:00
Jonas Gorski
780ccbf9f1 base-files: board_detect: allow specifying the generated file
Allow passing a filename to change the location of the generated
board.json.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-13 15:49:51 +02:00
Felix Fietkau
577f873daf kernel: remove unused morse led trigger driver
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-04 20:53:02 +02:00
Mathias Kresin
3004298e62 sysupgrade: unmount filesystems before reboot
sysupgrade immediately reboots after flashing an image and doesn't
allow to unmount filesystems. At least in case the image used for
sysupgrade is stored on a FAT formatted usb flash drive, the following
warning is printed during the next mount of the flash drive:

FAT-fs (sda1): Volume was not properly unmounted. Some data may be
corrupt. Please run fsck.

Although a data corruption during read operations is unlikely, there is
no need to scare the users.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-04 18:19:46 +02:00
Conn O'Griofa
e1406cd31a base-files: sysupgrade: fix pseudobridge upgrades
Treat 'relayd' as an essential service to avoid connection interruptions during sysupgrade on devices configured as a pseudobridge.

Signed-off-by: Conn O'Griofa <connogriofa@gmail.com>
2016-07-24 06:54:40 +02:00
Etienne CHAMPETIER
3946a55291 base-files: seed /dev/urandom
This commit:
1) seed /dev/urandom with the saved seeds as early as possible
   (see /lib/preinit/81_urandom_seed)
2) save a seed at /etc/urandom.seed if it doesn't exists
3) save a new seed each boot at "system.@system[0].urandom_seed"
   (see /etc/init.d/urandom_seed)

We use getrandom() so we are sure /dev/urandom pool is initialized

Seed size is 512 bytes (ie /proc/sys/kernel/random/poolsize / 8)
it's the same size as in ubuntu 14.04 and all systemd systems

Seeding /dev/urandom doesn't change entropy estimation, so we still have
"random: ubus urandom read with 4 bits of entropy available"
messages in the logs, but we can now ignore them if
after "urandom-seed: Seeding with ..." message

Saving a new seed on each boot is disabled by default to avoid too much
writes without user consent

v2: log preinit messages to /dev/kmsg
v3: use non generic function name for logging, as /lib/preinit/ files
    are all sourced together in /etc/preinit
v4: after a lot of discussion on the ML, use a uci config param
v5: config param is now the path of the seed

Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
2016-06-30 22:48:39 +02:00
Jo-Philipp Wich
07f03d0833 base-files: support port_state LED types in board.d
Add support for handling port_state LEDs as used by ADM5120.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-08 00:31:09 +02:00
Jo-Philipp Wich
7f69458296 base-files: rework postinstall uci-defaults handling
Some package postinstall operations, e.g. those emitted by the LuCI build
system, source and delete the uci-defaults themselves upon package insteall,
causing the generic defaults apply code to trigger shell errors like:

    .../luci-app-ddns.postinst: .: line 130: can't open './40_luci-ddns'

Rework the generic apply code to check the existence of the uci-defaults
script before trying to source it, use sed to prefilter the list of entries
from the control file and perform the directory change in a subshell,
avoiding the need for cd $OLDPWD.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-27 10:27:45 +02:00
Jo-Philipp Wich
1012701014 x86: generalize partition discovery for sysupgrade
Generalize the partition discovery in sysupgrade in order to fix sysupgrade
and config backup/recovery on MMC block devices which use a different naming
scheme compared to mtdblock or sd* devices.

The change also adds the find applet to the ramdisk utilities so that upgrade
code can rely on it.

The commit is based on the initial submission by Russell Senior at
http://patchwork.ozlabs.org/patch/625440/ .

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-24 13:30:58 +02:00
John Crispin
a39ac242cc base-files: fix some failsafe issues
* if the shell was closed booting continued

Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 11:03:25 +02:00
Daniel Golle
9b9c78e071 base-files: evaluate uci-defaults on run-time installations
Packages may install scripts into /etc/uci-defaults to be executed once
after installation, usually at the first boot of the target. This works
fine if the package was installed to the rootfs during build or using
the ImageBuilder.
If the package is installed using opkg during run-time uci-defaults
were applied only after a reboot of the device. Avoid the need to
reboot by evaluting the package's uci-defaults in default-postinst.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-05-04 14:24:37 +01:00
John Crispin
ed07ef1601 base-files: split user/group addition code into a function
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-29 04:15:34 +02:00
John Crispin
b4e33a1c08 base-files: Allow to disable failsafe mode
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
2016-04-19 10:07:35 +02:00
John Crispin
5e85ae9e4c base-files: fix error message during boot
preinit spews out this message

"cat: can't open '/proc/device-tree/model': No such file or directory"

Signed-off-by: John Crispin <john@phrozen.org>
2016-04-11 11:58:57 +02:00
John Crispin
fa69553900 branding: add LEDE branding
Signed-off-by: John Crispin <blogic@openwrt.org>
2016-03-24 22:40:13 +01:00
John Crispin
63c9caaa91 base-files: add function ucidef_set_interface_raw to enable default configuration on interfaces other than lan and wan.
Signed-off-by: Micke Prag <micke.prag@telldus.se>

SVN-Revision: 48976
2016-03-10 19:07:17 +00:00
Felix Fietkau
4ac99abeb3 lantiq: do not set default firmware file
We are now shipping a DSL firmware, do not set it by default to some
file name.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48941
2016-03-07 11:03:18 +00:00
Jo-Philipp Wich
eced3b3a35 base-files: support passing mode to ucidef_set_led_netdev()
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48806
2016-02-26 14:49:17 +00:00
Felix Fietkau
285d9e364e base-files: add support for speed mask to switch config init scripts
This patch adds extra parameter to switch LED trigger initialization
functions.  New functionality maintains backward compatibility, so
calling functions without setting new speed_mask parameter works
as expected.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48776
2016-02-25 13:31:29 +00:00
John Crispin
c0c3f2d4c9 leds: support oneshot as well as timer triggers
oneshot and timer have the same configuration options, just a different
trigger name.

Signed-off-by: Karl Palsson <karlp@etactica.com>

SVN-Revision: 48770
2016-02-25 10:14:16 +00:00
Jo-Philipp Wich
4aeeead303 x86: preserve partition table on sysupgrade
With this patch sysupgrade will write directly to the partitions
instead of to the main disk.  The UUID is copied from the image
to the MBR as well.  This prevents the mbr from being completely
overwritten and losing the partition table.  The -p option has
been added to maintain the original behavior and overwite the
entire disk with the new image.  Tests have been added to ensure
that the image partitions match up with the active partitions.

Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>

SVN-Revision: 48682
2016-02-09 12:33:17 +00:00
Felix Fietkau
b7ab6c66cc base-files: fix sysupgrade 'wget' handling for uclient-fetch
change 48451 tried to add support for uclient-fetch by moving
/usr/bin/wget to /bin/wget, but this change kept the symbolic
link to /bin/busybox as install_bin creates links to param 1

the desired fix is to link to uclient-fetch to wget:
  install_bin /bin/uclient-fetch /bin/wget

Signed-off-by: John Clark <inindev@gmail.com>

SVN-Revision: 48483
2016-01-25 12:35:21 +00:00
Felix Fietkau
f57419d26e base-files: fix sysupgrade 'wget' handling
with r48379 and r48386 the path of wget changed.
respect that and adjust the dirname.

this fixes #21680

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 48451
2016-01-22 09:41:58 +00:00
Felix Fietkau
0936f5b0e0 base-files: cleanup mtd_get_mac_binary hexdump
Remove usage of dd, as per request from Yousong Zhou.
<https://lists.openwrt.org/pipermail/openwrt-devel/2015-December/037743.html>

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47949
2015-12-19 11:28:42 +00:00
Felix Fietkau
c74a690661 ar71xx: scan nand ubi partition for ath9k eeprom files
The MR18 stores the ath9k eeprom values on the NAND.
This patch makes it possible to retrieve the images
from there.

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47948
2015-12-19 11:28:36 +00:00
Jo-Philipp Wich
67e1c87012 all: drop old uci-defaults.sh
Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one
and update all users accordingly.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47867
2015-12-11 15:26:06 +00:00
Jo-Philipp Wich
08078df83d board.d: add support for gpio_switch sections
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47762
2015-12-04 15:02:32 +00:00
Jo-Philipp Wich
61a99da4f9 base-files: board.d: auto-set model id and name if /tmp/sysinfo is available
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47752
2015-12-04 11:06:57 +00:00
Jo-Philipp Wich
6c8daa6ba3 base-files: board.d: support dsl modems, atm bridges and pppoe protocol
This adds support for specifying the dsl modem, atm bridge configs and setting
the pppoe protocol for wan.

These additions are required to port the Lantiq target to board.d.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47750
2015-12-04 09:56:55 +00:00
Jo-Philipp Wich
527ec2af59 all: remove dummy ucidef_set_interface_loopback() from board.d
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47744
2015-12-03 23:13:00 +00:00
Jo-Philipp Wich
f611358870 base-files: board.d: support specifiying the protocol of lan and wan
Some boards, e.g. the Sheeva Plug, require the lan interface to be set
to DHCP instead of a static address, therfore support that.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47732
2015-12-03 22:27:06 +00:00
Jo-Philipp Wich
ac9bed4bc0 base-files: board.d: support timer leds
Add ucidef_set_led_timer() and handling for it to config_generate.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47731
2015-12-03 22:27:02 +00:00
Jo-Philipp Wich
b3f8340a5e base-files: board.d: support ide leds
Add ucidef_set_led_ide() to define "ide-disk" triggered leds.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47729
2015-12-03 21:12:56 +00:00
Jo-Philipp Wich
734ae1bd17 base-files: uci-defaults-new.sh: fix for handling multiple ifnames
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47728
2015-12-03 21:12:51 +00:00
Jo-Philipp Wich
9b02e73188 board.d: merge ucidef_add_switch() and ucidef_add_switch_ports()
This changes uci-defaults-new.sh, config_generate and all relevant board.d
files in order combine ucidef_add_switch() and ucidef_add_switch_ports() into
a single function.

Also removes now superfluous enable and reset arguments.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47721
2015-12-03 17:30:24 +00:00