Commit graph

2508 commits

Author SHA1 Message Date
Felix Fietkau
5b07e8731b ath9k: remove gpio chip owner field to fix module unloading
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-11 15:46:42 +02:00
Felix Fietkau
5ce2341a03 mac80211: fix a powersave issue in the intermediate queueing code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-11 15:46:35 +02:00
Felix Fietkau
4f106d6c07 Revert "ath9k: switch to using mac80211 intermediate software queues"
This reverts commit 31e5ed4152.
I've noticed some weird powersave related issues with this commit.
Revert until they've been fixed.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-11 14:55:22 +02:00
Felix Fietkau
31e5ed4152 ath9k: switch to using mac80211 intermediate software queues
Provides a nice latency reduction under load, due to mac80211's fq_codel
support.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-11 10:16:49 +02:00
Felix Fietkau
916aebb300 ath10k: fix a compiler warning
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-09 19:42:26 +02:00
Felix Fietkau
73dd59546b ath10k: fix #if vs #ifdef in led trigger patch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-09 19:42:22 +02:00
Felix Fietkau
78ae53ff2f mac80211: make package ath9k-common hidden
It cannot be selected independently of ath9k and ath9k-htc

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-09 19:38:49 +02:00
Álvaro Fernández Rojas
f4293e476d brcm2708-gpu-fw: update to latest version
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-07-09 16:29:19 +02:00
Rafał Miłecki
c729fe0269 mac80211: backport brcmfmac changes from 2016-07-08
To work correctly hostapd requires wireless driver to allow interfaces
removal. It was working with brcmfmac only partially. Firmware for
BCM43602 got some special hack (feature?) that allowed removing all
interfaces by disabling mbss mode. It wasn't working with BCM4366
firmware and remaining interfaces were preventing hostapd from starting
again.

Those patches add support for "interface_remove" firmware method which
works with BCM4366 firmware and they make it finally possible to use
BCM4366 & brcmfmac & multiple interfaces.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-08 18:21:04 +02:00
Felix Fietkau
d98409edbc mt76: update to the latest version, fixes powersave issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-08 10:41:45 +02:00
Gabe Rodriguez
07e8cfed8a mwlwifi: Update to latest version
Signed-off-by: Gabe Rodriguez <lifehacksback@gmail.com>
2016-07-07 10:57:45 +02:00
Rafał Miłecki
8d95b665e8 mac80211: backport brcmfmac changes from 2016-06-29
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-06 10:34:19 +02:00
Zoltan HERPAI
df2889c709 packages: fix bmp085-spi typo
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2016-07-05 13:36:36 +02:00
Felix Fietkau
92d856f50a ath9k: add beacon related stability fixes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-05 10:45:17 +02:00
Felix Fietkau
f5088dc13f kernel: fix duplicate drivers for the PC speaker in one package
Only use the ALSA capable one, it supports regular beeps as well

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-03 19:35:43 +02:00
Felix Fietkau
f226d5879e mac80211: move include statements for skb_get_hash_perturb() to prevent issues with newer kernels
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-03 18:13:11 +02:00
Felix Fietkau
b174832159 mac80211: backport skb_get_hash_perturb() for 4.1 and older
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-03 17:56:53 +02:00
Martin Blumenstingl
70afc0bdd1 kernel: mac80211: set the parent of the ath9k gpio_chip
This allows gpiolib to re-use ath9k's devicetree node as GPIO
controller.
Example:

ath9k: ath9k@0 {
	#gpio-cells = <2>;
	gpio-controller;
}

Now the ath9k node can be used just like any other GPIO controller:
	gpios = <&ath9k 1 GPIO_ACTIVE_HIGH>;

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-07-02 19:34:50 +02:00
Martin Blumenstingl
7b7ea91e24 kernel: mac80211: enable the gpio controller for all ath9k devices
This enables ath9k's built-in GPIO controller for all chip versions
(instead of an explicit whitelist). This also allows us to get rid of
some duplicate code between hw.c and gpio.c because hw.c already
determines the number of GPIOs.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-07-02 19:34:50 +02:00
Martin Blumenstingl
3ce71eaedd kernel: mac80211: fold the AR9280 GPIO patch into the ath9k GPIO patch
This folds 550-ath9k_add_ar9280_gpio_chip.patch into
548-ath9k_enable_gpio_chip.patch because the former patch only extends
code which is introduced in the latter.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-07-02 19:34:50 +02:00
Mathias Kresin
cbfeb7796e mac80211: refresh patches
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-07-02 19:34:50 +02:00
Felix Fietkau
76d09dcb01 ath10k: fix tx performance regression on older chipsets
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 19:34:50 +02:00
Felix Fietkau
d002aee42c mac80211: enable STBC and LDPC for VHT rates
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 19:34:50 +02:00
Felix Fietkau
67a7daa938 mac80211: update to wireless-testing 2016-06-20
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 19:34:50 +02:00
Stephen Walker
66b67b743f kernel: other.mk: add pps-ldisc support
The pps-ldisc kernel module supports Pulse-Per-Second connected with the CD (Carrier Detect) pin.

Signed-off-by: Stephen Walker <stephendwalker+github@gmail.com>
2016-06-30 22:48:39 +02:00
Daniel Dickinson
3ee278c5c9 package/kernel: Enable XATTR by default
OpenWrt enables XATTR support pretty much universally, therefore
for filesystems that a loaded as modules also enable XATTR support
so that there are no unexpected missing capabilities.

Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
2016-06-30 22:48:39 +02:00
Hauke Mehrtens
ffcae8b494 prism54-firmware: add also other p54 firmware to own package
Extract the other p54 firmware files into the prism54-firmware package.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
2016-06-30 19:42:59 +02:00
Hauke Mehrtens
37fa64a6c5 firmware: extract prism54-firmware into own package
Instead of downloading the firmware for prism54 devices in the
wireless.mk do it in an extra package Makefile. To ship the complete
source code Intel ships our modified OpenWrt/LEDE + the content of the
dl directory. We do not want to have any files in the dl/ directory
which are not needed to build our images. The prism54 gets downloaded
every time independently of building kmod-net-prism54 or not. When it
is in a own package it only gets downloaded when the firmware package
is selected.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
2016-06-30 19:21:02 +02:00
Kevin Darbyshire-Bryant
0b208a7de1 kmod-sched-cake: Switch to COBALT algorithm
COBALT is a hybrid codel/blue algo combining best elements of both.
Exhibits improved behaviour in presence of abuse from unresponsive flows
handled by 'blue', whereas responsive flows are still handled by codel.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-06-30 00:43:03 +02:00
Alexander Couzens
19aae09f5f kmod-bmp085: add dependency on !LINUX_3_18 !LINUX_4_1
93d5629a introduced a build failure on older platforms (<4.4)
because bmp085 is a boolean and not a tristate.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-29 02:46:48 +02:00
Dirk Neukirchen
93d5629a27 modules: add BMP085 pressure sensor
add BMP085 and BMP180 pressure sensors
this driver supports the SPI and I2C and
older chips (BMP280 is supported by iio subsystem)

issue found when cleaning up omap/config

found while writing this patch that a
similar patch was submitted in June/July 2014 but not integrated

only compile tested

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-06-29 00:42:19 +02:00
Jo-Philipp Wich
1e03998e2b mac80211: fix skb size calculation in 4addr mode (FS#24)
The PDU length of incoming LLC frames is set to the total skb payload size
in __ieee80211_data_to_8023() of net/wireless/util.c which incorrectly
includes the length of the IEEE 802.11 header.

The resulting LLC frame header has a too large PDU length, causing the
llc_fixup_skb() function of net/llc/llc_input.c to reject the incoming
skb, effectively breaking STP.

Solve the problem by properly substracting the IEEE 802.11 frame header size
from the PDU length, allowing the LLC processor to pick up the incoming
control messages.

Special thanks to Gerry Rozema for tracking down the regression and proposing
a suitable patch.

Fixes FS#24.

References:
https://bugs.lede-project.org/index.php?do=details&task_id=24

Reported-by: Gerry Rozema <gerryr@rozeware.com>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-28 22:43:22 +02:00
Hauke Mehrtens
2ca4fa5feb rtl8192su-firmware: move firmware to own package
Instead of downloading the firmware from some website take it from
linux-firmware package and do not download it separately any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-06-25 19:20:16 +02:00
Hauke Mehrtens
3f38356893 packages: prefer http over git for git protocol
In company networks everything except the http and https protocol is
often causes problems, because the network administrators try to block
everything else. To make it easier to use LEDE in company networks use
the https/http protocol for git access when possible.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-06-22 19:32:06 +02:00
Mathias Kresin
ac1cc30cdf lantiq: ltq-atm: fix xrx200 depends
This one was missed by abc346db0e.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-06-20 11:45:44 +02:00
Felix Fietkau
240137a744 mt76: update to the latest version, fixes a SMPS handling issue
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-17 14:51:11 +02:00
Felix Fietkau
4bab4dee84 ath10k: merge some more pending upstream fixes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-17 14:12:44 +02:00
Felix Fietkau
70bb22037a hostap-driver: mark as broken, it causes extra bloat in hostapd and is probably not used anymore
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-15 18:27:44 +02:00
Felix Fietkau
c2ec43733a mt76: update to latest version, adds survey support for mt76x2
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-15 17:50:51 +02:00
Felix Fietkau
8e70655f35 mt76: update to the latest version, fixes a monitor mode injection crash
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-15 15:00:14 +02:00
John Crispin
abc346db0e package/lantiq: make lantiq kernel modules work with xway_legacy
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:43 +02:00
Adrian Panella
c354591d1b mac80211: ath10k fix otp check patch
Fix patch to match new updated package version

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:41 +02:00
Felix Fietkau
df7af9317b ath10k: merge some pending stability fixes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:51:23 +02:00
Scott Shambarger
4b8f0a2d26 mac80211: fix calculation of VHT capability values
- Fix calculation of `$vht_cap` bit field
 - Replace wrong reference to `$tx_stbc` variable with proper `$tx_stbc_2by1` one
 - Emit proper `RX-STBC-{1,12,123,1234}` tokens for the VHT capability list

See https://dev.openwrt.org/ticket/22535 for reference.

Signed-off-by: Scott Shambarger <devel@shambarger.net>
2016-06-10 18:08:30 +02:00
Álvaro Fernández Rojas
c17f02d2f2 brcm2708-gpu-fw: update to latest version
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-08 19:09:58 +02:00
Jo-Philipp Wich
24a7ccb056 treewide: replace jow@openwrt.org with jo@mein.io
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-07 11:42:52 +02:00
Felix Fietkau
7eeb254cc4 treewide: replace nbd@openwrt.org with nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-07 08:58:42 +02:00
Hannu Nyman
1a3c56f832 kmod-sched-cake: Add support for cake qdisc
Add 'cake' qdisc kernel module package.

V2 - KDB Small update to base on latest cake tc changes (wash option
deprecated)
V3 - KDB Move kmod-sched-cake package to kernel as is kernel related
V4 - KDB Split into individual patches, kmod & tc

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Acked-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-06-06 14:58:11 +02:00
Dirk Neukirchen
34a3ec9c63 modules: add missing module to ipsec description
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-06-06 14:58:11 +02:00
Daniel Golle
3ec4803932 mac80211: respect user-set regulatory domain by default
It turns out most device vendors don't set the correct country code
in their devices' on-flash-EEPROM sections as they apparently rather
provide a complete per-target-market firmware with patched drivers
instead of just setting the country code.
This results in the driver to incorrectly assume the value stored in
the on-flash-EERPOM (usually US or China) being the regulatory domain
inside which the device is being used.
To work around this issue, OpenWrt introduced the ATH_USER_REGD config
variable to decide during build whether or not to allow the user to
override the regulatory domain setting. This option, however, is not
enabled by default and thus ends up being disabled for snapshots builds
and released binaries.
As we know for a long time that most devices got borked regulatory
domain values set in their EEPROMs we should allow our users to respect
their local law (instead of just assume US or China laws).
Note that also the current default has great potential of users not
ever setting their regulatory domain and thus using inapproriate and
potentially illegal frequencies and/or tx-power settings

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-06-05 13:37:55 +02:00