Commit graph

38692 commits

Author SHA1 Message Date
Jo-Philipp Wich
3c3f7cfe4d ipq806x: fix EA8500 switch configuration
Do not assign the CPU port twice, this confuses LuCI and possible other
programs relying on topology information in board.json.

Ref: https://github.com/openwrt/luci/issues/1086

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-03 14:15:34 +02:00
Nick Lowe
ed62d91f4b hostapd: add legacy_rates option to disable 802.11b data rates.
Setting legacy_rates to 0 disables 802.11b data rates.
Setting legacy_rates to 1 enables 802.11b data rates. (Default)

The basic_rate option and supported_rates option are filtered based on this.

The rationale for the change, stronger now than in 2014, can be found in:

https://mentor.ieee.org/802.11/dcn/14/11-14-0099-00-000m-renewing-2-4ghz-band.pptx

The balance of equities between compatibility with b clients and the
detriment to the 2.4 GHz ecosystem as a whole strongly favors disabling b
rates by default.

Signed-off-by: Nick Lowe <nick.lowe@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup, defaults change]
2017-05-03 13:58:23 +02:00
Abhilash Tuse
41feba8c4a hostapd: fix reload frequency change patch
When sta is configured, hostapd receives 'stop' and 'update' command from
wpa_supplicant. In the update command, hostapd gets sta parameters with
which it configures ap.

Problem is, with the default wireless configuration:
mode:11g freq:2.4GHz channel:1
If sta is connected to 5GHz network, then ap does not work. Ideally with
340-reload_freq_change.patch hostapd should reload the frequency changes
and start ap in 5GHz, but ap becomes invisible in the network.

This issue can be reproduced with following /etc/config/wireless:
config wifi-device  radio0
        option type     mac80211
        option channel  1
        option hwmode   11g
        option path     'virtual/uccp420/uccwlan'
        option htmode   'none'

config wifi-iface 'ap'
        option device 'radio0'
        option encryption 'none'
        option mode 'ap'
        option network 'ap'
        option ssid 'MyTestNet'
        option encryption none

config wifi-iface 'sta'
       option device radio0
       option network sta
       option mode sta
       option ssid TestNet-5G
       option encryption psk2
       option key 12345

This change updates current_mode structure based on configured hw_mode
received from wpa_supplicant. Also prepare rates table after frequency
selection.

Signed-off-by: Abhilash Tuse <Abhilash.Tuse@imgtec.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup, patch refresh]
2017-05-03 13:58:23 +02:00
Jo-Philipp Wich
65de093c18 base-files: implement ucidef_set_hostname(), ucidef_set_ntpserver()
Commit 2036ae4 (base-files: support hostname and ntp servers through board.d)
was supposed to implement these procedures but lacked the required changes
to uci-defaults.sh.

Add the missing procedures now to fix config generation on targets relying
on hostname or NTP server presetting.

Fixes FS#754.

Reported-by: Cristian Morales Vega <cristian@samknows.com>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-03 13:47:57 +02:00
Yousong Zhou
0c3fe281e3 opkg: alternatives: use ERROR level for symlink failure
Changes since last version

    04e279e pkg_alternatives: use ERROR level for symlink failure

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-05-03 17:40:47 +08:00
Yousong Zhou
cf75fb5e14 busybox: alternatives: accomodate CONFIG_BUSYBOX_CUSTOM=y
When busybox customisation is enabled, we should depend on config
symbols CONFIG_BUSYBOX_CONFIG_xxx to form alternatives specs

Reported-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-05-03 17:40:47 +08:00
Yousong Zhou
7842ccecc0 build: reset ALTERNATIVES field in Package/Default
Otherwise ipkg packages may wrongly take on alternatives specs of
another package sharing the same package Makefile

Fixes FS#753

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-05-03 17:40:46 +08:00
John Crispin
1ff71ccd5e mediatek: fix sysupgrade on eMMC boards
Signed-off-by: John Crispin <john@phrozen.org>
2017-05-03 10:31:55 +02:00
Kevin Darbyshire-Bryant
b65c619d02 dnsmasq: bump to 2.77test5
A number of small tweaks & improvements on the way to a final release.
Most notable:

Improve DHCPv4 address-in-use check.
Remove the recently introduced RFC-6842 (Client-ids in DHCP replies)
support as it turns out some clients are getting upset.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2017-05-02 22:32:14 +02:00
Yousong Zhou
fa3649d97e busybox: add alternatives specs for those also provided by procps-ng
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-05-03 00:53:44 +08:00
Yousong Zhou
9b4c41524f iproute2: bump PKG_RELEASE
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-05-02 22:45:42 +08:00
Yousong Zhou
cfa5865187 iproute2: add ip-tiny, ip-full as alternatives of /sbin/ip
They will not be in conflict anymore ;)

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-05-02 22:42:36 +08:00
Yousong Zhou
8b1b094fef busybox: add as an alternative of /sbin/ip
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-05-02 22:42:36 +08:00
Yousong Zhou
fc9361e60e opkg: alternatives support
Changes since last version

    546bc72 pkg: alternatives support
    7a96972 libbb: xreadlink: fix memory leak on failure case
    3f13edd pkg_run_script: use pkg->dest in half installed case

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-05-02 22:42:35 +08:00
Yousong Zhou
73bc636aba build: ipkg: new field Alternatives
It's a list of specs of the following form seprated by commas to
describe alternatives provided by this package

    <prio>:<path>:<altpath>

<path> will be a symbolic link to <altpath> of the highest <prio>

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-05-02 22:10:51 +08:00
Yousong Zhou
dac629f710 build: cleanup tmp/ dir of target rootfs
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-05-02 22:10:50 +08:00
Felix Fietkau
60081f9a00 imx6: remove linux 4.4 support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-05-02 15:17:30 +02:00
Alexey Brodkin
491abe8c99 target/arc770: switch to 4.9 kernel
With update of ARC tools to arc-2016.09 based on GCC v6.x
we have to bump Linux kernel version so both toolchain and
the kernel use the same ARC ABIv4.

Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
2017-05-02 15:17:30 +02:00
Alexey Brodkin
d73045826a target/archs38: switch to 4.9 kernel
With update of ARC tools to arc-2016.09 based on GCC v6.x
we have to bump Linux kernel version so both toolchain and
the kernel use the same ARC ABIv4.

Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
2017-05-02 15:17:30 +02:00
Alexey Brodkin
34e8393019 toolchain/arc: update to the most recent release arc-2016.09
arc-2016.09 is the most recent toolchain for ARC cores and
it is based on top of upstream Binutils 2.27 and GCC 6.2.1.

With updated major version of GCC we copied all GCC 6.x patches
for ARC as well as Bintils 2.27 patches.

Note that toochain sports ARCv4 ABI and so must be used
with 4.8+ Linux kernels. Even though it will build v4.4 kernel
perfectly fine on attempt to run user-space apps they won't
work with older kernel. That said previuosly sent RFC patches with
Linux kernel update are required:
 [1] https://patchwork.ozlabs.org/patch/726686/
 [2] https://patchwork.ozlabs.org/patch/726687/

Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
2017-05-02 15:17:30 +02:00
Alexey Brodkin
2b27e62e74 linux-4.9: Fix building of DWC3 module
DWC3 driver uses of_usb_get_phy_mode() which is
implemented in drivers/usb/phy/of.c and in bare minimal
configuration it might not be pulled in kernel binary.

In case of ARC or ARM this could be easily reproduced with
"allnodefconfig" +CONFIG_USB=m +CONFIG_USB_DWC3=m.

On building all ends-up with:
---------------------->8------------------
  Kernel: arch/arm/boot/Image is ready
  Kernel: arch/arm/boot/zImage is ready
  Building modules, stage 2.
  MODPOST 5 modules
ERROR: "of_usb_get_phy_mode" [drivers/usb/dwc3/dwc3.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
---------------------->8------------------

This was affecting Lede in case of CONFIG_ALL_KMODS=y.

The patch is already scheduled for v4.12 and once it is backported to
4.9.y it must be removed from here.

Note this patch makes sense not only for ARC instead it fixes
a generic issue which may affect more arches and platforms thus
putting it in "generic/" folder.

Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [patch rename]
2017-05-02 15:17:30 +02:00
Felix Fietkau
c13f943d2a perf: disable build for ARC, it is currently broken
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-05-02 15:17:29 +02:00
Alexandru Ardelean
3bdeaa5f0d target: mpc85xx: make kernel_menuconfig
It's the best method I know (so far) to refresh
the kernel config to a default state.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2017-05-02 14:33:59 +02:00
Alexandru Ardelean
2512741c9a target: mpc85xx: tl_wdr4900_v1: drop 'fsl_rstcr_restart' hook
Since commit:
7120438e5d

Seems that fsl_rstcr_restart() has been converted
to a reset handler and dropped as hook/callback.

Apply the same to the `tl_wdr4900_v1` target.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2017-05-02 14:33:59 +02:00
Alexandru Ardelean
e57d783185 target: mpc85xx: refresh kernel patches
Re-applied patches:
001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch
100-powerpc-85xx-tl-wdr4900-v1-support.patch

Dropped patch:
200-spi-fsl-espi-preallocate-local-buffer.patch
now part of kernel upstream hash
1423877b73

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2017-05-02 14:33:59 +02:00
Alexandru Ardelean
3688b96226 target: mpc85xx: switch to kernel 4.9
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2017-05-02 14:33:58 +02:00
Bastian Köcher
5378c85677 build: remove absolute path to perl and replace with /usr/bin/env perl
Signed-off-by: Bastian Köcher <git@kchr.de>
2017-05-02 14:33:58 +02:00
Felix Fietkau
5afe9a054c kernel: allow selecting RTC drivers on targets without explicit RTC support
Keep them disabled by default to avoid pulling in extra kernel bloat

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-05-02 14:33:58 +02:00
Alexander Couzens
21c2e93e67
uboot-omap: rename patch to 101-disable-thumb-omap3.patch
It's disabling thumb for the whole omap3 family.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-30 12:19:07 +02:00
Alexander Couzens
ca8988614c uboot-omap: enable thumb for overo
Even it's unknown if it's booting with thumb, because the lack of hardware.
Enable it for now, so the build succeed, because without thumb it can not fit
into spl.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-30 12:17:30 +02:00
John Crispin
3ddc1914ba mediatek: fix mt7530 mcm reset
Early SoC versions with an ECO of 1 required the gpio reset.
Mass production SoCs no longer need this work around.

Signed-off-by: John Crispin <john@phrozen.org>
2017-04-29 09:48:35 +02:00
Hans Dedecker
c45ef702ff odhcpd: update to git HEAD version (FS#656,FS#595)
9268ca6 ndp: don't trigger IPv6 ping when neighbor entry is invalid
2b3355f ndp: fix adding proxy neighbor entries
7dff5b4 ndp: fix wrong interface name in syslog message
a54afb5 dhcpv6-ia: Fix segfault when writing DHCPv4 leases in state file
c0e9dbf ubus: don't segfault when there're no leases

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-04-28 21:59:29 +02:00
Hans Dedecker
9412fc2949 dnsmasq: support dhcp_option config as a list
Configuring dhcp_option as an option does not allow the usage of white
spaces in the option value; fix this by supporting dhcp_option as a list
config while still supporting the option config to maintain backwards
compatibility

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-04-27 22:04:29 +02:00
Jo-Philipp Wich
4b4f739373 x86: enable 4G high memory support for generic (32bit) subtarget
This is required to fully support a number of 32bit x86 systems equipped
with more than one GB ram, e.g. certain Atom CPU machines.

Ref: https://forum.lede-project.org/t/17-01-1-x86-doesnt-detect-all-of-the-ram/3295

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-04-27 15:19:18 +02:00
Jo-Philipp Wich
a45cde9118 ramips: ZTE-Q7: fix switch driver initialization in DTS (FS#716)
Add the changes suggested by FS#716 to fix the switch driver initialization
on the ZTE Q7.

Also remove the `pinctrl-names` field obsoleted by the changes.

Reported-by: Harry Lau <harrylwc@gmail.com>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-04-27 10:44:28 +02:00
Jo-Philipp Wich
76871a8dbb busybox: nslookup_lede: mimic output format of old Busybox applet
When invoking "nslookup_lede" with a domain argument and without explicit
query type, issue both A and AAAA queries and display the resulting IP
addresses in a numbered list style, similar to how the old BusyBox nslookup
used to output the records.

This is required for compatibility with certain scripts.

Ref: https://forum.lede-project.org/t/nslookup-ipv6-in-lede-17-01-1

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-04-27 10:44:28 +02:00
Jo-Philipp Wich
f1e3285461 busybox: nslookup_lede: fix compatibility with v1.25
The ":*" optstring syntax was only recently introduced with BusyBox v1.26,
older versions need a corresponding hint in the "opt_complementary" variable
to denote flag values that should be stored as llist entries.

Add the required opt_complementary entry to fix random SIGBUS, SIGILL or
SIGSEGV related crashes on BusyBox 1.25.x when attempting to use the "-q"
flag of the "nslookup_lede" applet.

Ref: https://forum.lede-project.org/t/nslookup-ipv6-in-lede-17-01-1

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-04-27 10:44:28 +02:00
Mathias Kresin
3a2cc2c8ad ramips: fix syntax error in board.d/01_leds
Fixes the following error:

  syntax error: unexpected newline (expecting ")")

Fixes: FS#739

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-04-27 09:39:34 +02:00
Mathias Kresin
bd2727fb25 ramips: ZBT-WE826: include the correct dtsi
Fix a copy/paste error and include the ZBT-WE826 dtsi instead of the
ZBT-WG3526 one.

Fix the syntax error in the ZBT-WE826 dtsi to prevent an compile error.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-04-27 09:39:34 +02:00
Hans Dedecker
e5bbead1a8 dropbear: fix procd interface trigger install
Install procd interface triggers only for interfaces which are enabled
so dropbear instances running on (an) enabled interface(s) are not
restarted due to an interface trigger of an interface which is disabled.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-04-26 21:29:16 +02:00
Daniel Engberg
dca2966b77 busybox: Enable sendfile by default
Enable sendfile system call by default.
http://lists.busybox.net/pipermail/busybox-cvs/2014-November/034831.html

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-04-26 13:40:37 +02:00
Daniel Engberg
edda8ecd79 include/packages-defaults.mk: Remove LARGEFILE option
Remove LARGEFILE option, support was removed back in 2011 (OpenWrt rev 25208).

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-04-26 13:39:11 +02:00
Tim Harvey
9d91ef52c3 imx6: ventana: add GW553x board identification
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-04-26 11:52:55 +02:00
Tim Harvey
456bd95023 imx6: disable MSI interrupts
The IMX6 PCIe host controller does not fire legacy interrupts if MSI is
enabled. A patch is being worked on to enable MSI at runtime only when
it is needed but meanwhile this patch will disable MSI for the imx6 kernel.

This fixes the no interrupt issue on cards/drivers that use legacy interrupts
such as ath9k.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-04-26 11:52:55 +02:00
Tim Harvey
bc1e7469aa imx6: apply upstream mmc fix for DDR50 cards on UHS-I capable boards
https://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git/commit/?h=fixes&id=9f327845358d3dd0d8a5a7a5436b0aa5c432e757

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-04-26 11:52:55 +02:00
Sergey Ryazanov
5bf98b1acc build: fix symlinked .config handling
When running "make menuconfig" with symlinked .config (e.g. to
env/.config) it renames symlink to .config.old, creates new .config file
and writes updated configuration here.

This breaks the desired workflow when changes in the configuration could
be checked using "scripts/env diff" and commited with
"scripts/env save". Since the env/.config file is not updated.

Fix this issue by exporting KCONFIG_OVERWRITECONFIG=1, which forces
mconf to overwrite the .config content, instead of renaming it and
creating a new file. This variable is set only if .config is a symlink,
otherwise the variable is not exported and the old behaviour is
preserved.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2017-04-26 11:34:41 +02:00
Chris Blake
8f43ba8c48 apm821xx: Merge the Cisco Meraki MX60 & MX60W
Both of these boards share the same DTS, and hardware. The only
difference would be the PCI-E slot, and ath9k card found on the MX60W.
Due to the similarities, it would be more efficient to merge these
profiles.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-04-26 11:34:17 +02:00
Chris Blake
d1c3a9485a apm821xx: Add default packages to NAND target
This moves core router packages to the NAND target, to ensure they are
applied to all images. This change is being done due to an issue found
when flashing the MX60W image, which came without these when built as a
multi image.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-04-26 11:34:14 +02:00
Felix Fietkau
837285b832 ar71xx: fold 641-MIPS-ath79-fix-AR934x-OTP-offsets.patch into the patch that it fixes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-04-26 10:29:45 +02:00
Chris Blake
ad0c1d3a31 mac80211: Backport AR934x OTP Patch
Merged upstream in https://patchwork.kernel.org/patch/9572541/, this
patch fixes the OTP offset used by the AR934x and AR955X to properly
enable reading from the OTP.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-04-26 10:29:45 +02:00