Commit graph

24 commits

Author SHA1 Message Date
Jo-Philipp Wich
527ec2af59 all: remove dummy ucidef_set_interface_loopback() from board.d
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47744
2015-12-03 23:13:00 +00:00
Jo-Philipp Wich
9b02e73188 board.d: merge ucidef_add_switch() and ucidef_add_switch_ports()
This changes uci-defaults-new.sh, config_generate and all relevant board.d
files in order combine ucidef_add_switch() and ucidef_add_switch_ports() into
a single function.

Also removes now superfluous enable and reset arguments.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47721
2015-12-03 17:30:24 +00:00
Jo-Philipp Wich
fff1a82180 mvebu: switch network and led config defaults to board detection framework
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47674
2015-11-30 10:43:31 +00:00
Jo-Philipp Wich
fc64fd8712 Revert "mvebu: migrate led and network setup to board detection framework"
Roll back the mvebu conversion to board detection code as we need to fix
some strcutural issues first.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47597
2015-11-22 20:52:10 +00:00
Jo-Philipp Wich
e20b689249 mvebu: migrate led and network setup to board detection framework
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47541
2015-11-20 23:59:31 +00:00
Imre Kaloz
8bb23cfb66 mvebu: add support for the Linksys WRT1900ACS (Shelby)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 47164
2015-10-08 10:01:30 +00:00
Imre Kaloz
20fac016e4 mvebu: add support for the Linksys boot counter
The u-boot boot counter was never reset after a successful boot,
which sometimes could make some variables become out of sync.
This patch adds support for the boot counter and enables
auto_recovery unconditionally.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46690
2015-08-19 08:31:23 +00:00
Imre Kaloz
9fb062cf93 mvebu: make flashing more safe
Turn on the auto recovery feature when flashing
and turn it off on successful bootup.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45792
2015-05-27 19:03:22 +00:00
Luka Perkov
76330e9b57 mvebu: better integrate xp-gp
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45459
2015-04-16 13:53:57 +00:00
Imre Kaloz
2705cda813 mvebu: add support for the Linksys Caiman and Cobra
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45456
2015-04-16 09:54:39 +00:00
Luka Perkov
a046ce235f mvebu: better integrate 385-ap-db
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45452
2015-04-15 16:23:10 +00:00
Imre Kaloz
b0ad24f0d5 mvebu: migrate mamba support to the upstreamed code
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45400
2015-04-12 17:29:50 +00:00
Imre Kaloz
6f01238398 mvebu: handle other SKUs as well
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45396
2015-04-12 15:04:14 +00:00
Imre Kaloz
b95a9f01c1 mvebu: set default regdomain
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44908
2015-03-20 12:15:40 +00:00
Imre Kaloz
e02478a22a mvebu: set default WRT1900AC switch config
This sets 'enable_vlan' and thus uses 802.1q
VLANs, but without tagging on either interface.

Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44509
2015-02-23 10:35:29 +00:00
Luka Perkov
81db848656 targets: base-files: diag.sh does not need to be executable
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44305
2015-02-07 19:58:58 +00:00
Luka Perkov
92e6e80080 targets: files in uci-defaults do not need to be executables
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44304
2015-02-07 19:58:52 +00:00
Imre Kaloz
7be967e954 mvebu: temporary el cheapo' fan control script
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44153
2015-01-26 20:41:43 +00:00
Imre Kaloz
8a103d5c56 mvebu: fixups for the new driver
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43978
2015-01-16 08:44:15 +00:00
John Crispin
019ea725aa add "preinit_regular" diag.sh set_state argument
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
Imre Kaloz
811d1682b8 enable handling of the wan led on the WRT1900AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41555
2014-07-10 10:19:06 +00:00
Imre Kaloz
b7b222279c set led triggers for the Linksys WRT1900AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41436
2014-07-01 09:45:41 +00:00
Imre Kaloz
d59f68531b use the power led on the WRT1900AC for status reporting
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41383
2014-06-29 12:53:09 +00:00
Imre Kaloz
f953ed4ffb automatically generate network config
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41381
2014-06-29 12:50:12 +00:00