Commit graph

40575 commits

Author SHA1 Message Date
George Hopkins
5203355062 mtd: add fixwrg command
Add a command to fix WRG headers, based on wrgg.c.

Signed-off-by: George Hopkins <george-hopkins@null.net>
2018-02-13 11:16:49 +01:00
George Hopkins
5c7a58764e kernel: mtdsplit: split by WRG header
Support splitting WRG images, which can be found in older
D-Link devices.

Signed-off-by: George Hopkins <george-hopkins@null.net>
2018-02-13 11:16:49 +01:00
John Crispin
6e7357097f kernel: add missing symbol
Signed-off-by: John Crispin <john@phrozen.org>
2018-02-13 10:55:46 +01:00
Koen Vandeputte
f21f8376e9 uqmi: bump package release
fixes: da8990e717 ("uqmi: use built-in command for data-link verification")

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-02-13 10:25:30 +01:00
Karl Palsson
b2a5f7683b ar71xx: Add eTactica EG-200 support
EG-200 is a DIN rail mountable device with one ethernet port, wifi,
an RS-485 port, and an internal USB attached uSD card reader.

Two leds, "modbus" and "etactica" are managed by userspace applications
in factory firmware.

Flash instruction:
    Original firmware is based on OpenWrt.
    Use sysupgrade image directly in vendor GUI.

Signed-off-by: Karl Palsson <karlp@etactica.com>
2018-02-13 10:01:53 +01:00
Koen Vandeputte
da8990e717 uqmi: use built-in command for data-link verification
uqmi contains a command for directly querying the modem if there
is a valid data connection, so let's use it.

This avoids the cases were all previous tests are succesful, but the
actual data link is not up for some reasons, leading to states were we
thought the link was up when it actually wasn't ..

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-02-13 10:01:53 +01:00
Koen Vandeputte
3508f8abb4 uqmi: use correct value for connection checking
Originally, the implementation only checked if uqmi command
execution succeeded properly without actually checking it's returned data.

This lead to a pass, even when the returned data was indicating an error.

Rework the verification to actually check the returned data,
which can only be correct if the uqmi command itself also executed correctly.

On command execution success, value "pdh_" is a pure numeric value.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-02-13 10:01:53 +01:00
Koen Vandeputte
3c5471032b uqmi: use general method for state cleaning
Debugging shows that using the general method properly cleans on each
run, while the method specifying the client-ID shows "No effect"
even while in connected state.

Fixes several connectivity issues seen on specific modems.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-02-13 10:01:53 +01:00
INAGAKI Hiroshi
192b5a7710 ramips: use new image build code for WHR-G300N
The tftp.bin image for Buffalo WHR-G300N was not built, so I was fixed
it after rewriting to new image build code. And the code for
factory-EU.bin was broken, so I deleted it.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-02-13 10:01:53 +01:00
John Crispin
5555545494 mediatek: remove the CPU_SUBTYPE
Signed-off-by: John Crispin <john@phrozen.org>
2018-02-13 10:01:53 +01:00
Koen Vandeputte
5adf16b492 cns3xxx: remove linux 4.9 support
- Remove kernel 4.9 support
- Apply specific 4.14 changes directly to source
- Refreshed all

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-02-13 10:01:53 +01:00
Rosen Penev
bef3f85742 target: Remove nomips16 option.
There is no target with a CPU subtype of nomips16.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-02-13 10:01:53 +01:00
Evgeniy Didin
063fa4cfa2 tools/mkimage: copy mkenvimage to bin directory
For some boards u-boot binary environment file is required,
which is generated by mkenvimage utility. But in OpenWrt there
is no separate support for mkenvimage, which is a part of u-boot tools.
mkenvimage gets built in u-boot/tools as well as mkimage anyways.

So lets just copy mkenvimage to the $(STAGING_DIR_HOST)/bin/ directory.

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
CC: Alexey Brodkin <abrodkin@synopsys.com>
CC: Hauke Mehrtens <hauke@hauke-m.de>
CC: John Crispin <john@phrozen.org>
2018-02-13 10:01:52 +01:00
John Crispin
1fe888554c kernel: add missing symbol for v4.14
Signed-off-by: John Crispin <john@phrozen.org>
2018-02-13 10:01:52 +01:00
Tim Harvey
fc03b3aa16 octeontx: add support for OCTEON TX target
The Cavium OCTEON TX is an ARM 64-bit SoC leveraging CPU cores and
periperhals from the Cavium ThunderX SoC.

This initial support provides a 4.14 kernel and kernel+initramfs that is
bootable on the Gateworks Newport GW630x as well as the Cavium sff8104
reference board.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2018-02-13 10:01:52 +01:00
Michael Heimpold
123dbb77aa packages: uboot-mxs: override instead of appending u-boot make flags
This prevents passing down the HOSTCC stuff set in u-boot.mk
which results in linking errors against openssl:

tools/mxsimage.o: In function `sb_aes_reinit':
mxsimage.c:(.text+0x202): undefined reference to `EVP_CIPHER_CTX_reset'
tools/mxsimage.o: In function `mxsimage_generate':
mxsimage.c:(.text+0x110d): undefined reference to `EVP_MD_CTX_new'
mxsimage.c:(.text+0x114f): undefined reference to `EVP_MD_CTX_free'
mxsimage.c:(.text+0x11c3): undefined reference to `EVP_MD_CTX_new'
mxsimage.c:(.text+0x1323): undefined reference to `EVP_MD_CTX_free'
mxsimage.c:(.text+0x134a): undefined reference to `EVP_CIPHER_CTX_reset'
tools/mxsimage.o: In function `mxsimage_verify_print_header':
mxsimage.c:(.text+0x23ce): undefined reference to `EVP_MD_CTX_new'
mxsimage.c:(.text+0x242c): undefined reference to `EVP_MD_CTX_new'
mxsimage.c:(.text+0x246b): undefined reference to `EVP_MD_CTX_free'
mxsimage.c:(.text+0x24ef): undefined reference to `EVP_CIPHER_CTX_reset'
mxsimage.c:(.text+0x2e52): undefined reference to `EVP_MD_CTX_free'
collect2: error: ld returned 1 exit status

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2018-02-13 10:01:52 +01:00
Michael Heimpold
dc263cd125 packages: uboot-mxs: bump to 2017.11
Also update the U-Boot BSP patch for I2SE Duckbill devices.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2018-02-13 10:01:52 +01:00
Michael Heimpold
f34b118b35 mxs: rename files to files-4.9
The Device Tree file for I2SE Duckbill boards was updated upstream.
Let's use the upstream version for upcoming kernel 4.14 by keeping
our current version for v4.9 still around.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2018-02-13 10:01:52 +01:00
Rosen Penev
c60a21532b ramips: Add support for the GnuBee Personal Cloud Two
The GnuBee Personal Cloud Two crowdfunded on https://www.crowdsupply.com
It is a low-cost, low-power, network-attached storage device.

Specifications:

- SoC: MediaTek MT7621AT
- RAM: DDR3 512 MB
- Flash: 32 MB
- Six SATA ports for 3.5" Drives
- One SDcard
- One USB 3.0
- Two USB 2.0
- Gigabit Ethernet: Three Ports
- UART 3.5mm Audio Jack or 3 pin header - 57600 8N1
- Three GPIOs available on a pin header

Flash instructions:

The GnuBee Personal Cloud Two ships with libreCMC installed.
libreCMC is a Free Software Foundation approved fork of LEDE/OpenWrt.
As such one can upgrade using the webinterface or sysupgrade.

Das U-Boot has multiple options for recovery or updates including :

- USB
- http
- tftp

Errata:
- While there are three ethernet ports, the third requires support for
  the second GMAC. This will come in kernel 4.14.
- The first hard drive slot has a clearance issue with the two fan
  headers. Workaround is to pull the headers out and connect the pins to
  jumper wires.
- Using this device as a NAS is problematic with the 4.9 kernel as many
  /dev/sdX reads throw silent errors. The current theory behind this is
  some kind of unhandled DMA mapping error in the kernel. This is not an
  issue with kernel 4.4.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-02-13 10:01:52 +01:00
Kristian Evensen
2d27ebbb93 iptables: Support building connlabel module
It is currently possible to enable connlabel-support in iptables.
However, in order for connlabel to work properly, the kernel module must
also be present. This patch adds support for building the
connlabel-module, and selects it by default when connlabel-support is
enabled.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
2018-02-13 10:01:52 +01:00
Yangbo Lu
f226e652f6 layerscape: fix call trace of pfe module removing
Updated pfe kernel patch to clean up iounmap(pfe->ddr_baseaddr).
pfe->ddr_baseaddr was got through phys_to_virt() not ioremap(),
so iounmap() for pfe->ddr_baseaddr should be removed.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-02-13 10:01:51 +01:00
Yangbo Lu
35a61fef56 layerscape: fix DPAA2 QDMA issue
This patch is to reverse a upstream dmatest patch for now
which is causing DPAA2 QDMA test issue.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-02-13 10:01:51 +01:00
Yangbo Lu
f78168be62 layerscape: add a make menuconfig known issue in README
This patch is to add a known issue of make menuconfig
in README file. This is also a common issue for OpenWrt.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-02-13 10:01:51 +01:00
Yangbo Lu
7b93a18b10 layerscape: fix type for kernel 4.9 dpaa2_mac_get_stats() function
This patch changes the declarations of ndo_get_stats64 handlers
to the previous struct rtnl_link_stats64 * return type instead of
the mainline void return.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-02-13 10:01:51 +01:00
Yangbo Lu
94698fa6ab layerscape: update README
Tis patch is to fix up some descriptions in README.
Per-device rootfs had been supported, and a known issue
had been found. These also should be updated accordingly.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-02-13 10:01:51 +01:00
Yangbo Lu
e547bd36bd layerscape: support ubifs rootfs in u-boot env
ls1012ardb/ls1012afrdm/ls1046ardb/ls1088ardb firmwares now use ubifs
rootfs. So u-boot env should be set accordingly.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-02-13 10:01:51 +01:00
Yangbo Lu
1079a03886 layerscape: support ubifs rootfs
Some layerscape devices (ls1012ardb/ls1012afrdm/ls1046ardb/ls1088ardb)
were using ext4 rootfs because there were issues using squashfs.
This patch is to drop using ext4 rootfs and use ubifs rootfs instead
which is more proper for SPI-NOR flash.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-02-13 10:01:51 +01:00
Yangbo Lu
d6fd44cebf layerscape: update u-boot to LSDK1712
This patch is to update layerscape u-boot to
NXP LSDK1712 release.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-02-13 10:01:51 +01:00
Yangbo Lu
0f7c83bb26 layerscape: update ppfe firmware to LSDK1712
Updated ppfe firmware to NXP LSDK1712 release. Used
ppfe firmware git tree on NXP github since it was
migrated here from qoriq-open-source github.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-02-13 10:01:51 +01:00
Yangbo Lu
13b2735a46 layerscape: add ls-rcw-bin package
NXP LSDK1712 release used two rcw git trees. The
original rcw git tree was still source code but
dropping ls1012a/ls1088a/ls2088a boards in LSDK1712.
Instead another new rcw git tree was used to just
provided rcw binaries for these boards dropped. So
this patch is to update ls-rcw to LSDK1712 release
and add a new ls-rcw-bin package.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-02-13 10:01:50 +01:00
Yangbo Lu
0a4d12b769 layerscape: update PPA firmware to LSDK1712
This patch is to update PPA firmware to NXP LSDK1712
release.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-02-13 10:01:50 +01:00
Yangbo Lu
4e85171e85 layerscape: migrate fman-ucode to NXP github
fman-ucode had been migrated from qoriq-open-source
github to NXP github. So the Makefile should be fixed
accordingly.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-02-13 10:01:50 +01:00
Yangbo Lu
f613743687 layerscape: update MC firmware to LSDK1712
Updated MC firmware to NXP LSDK1712 release. Used
MC firmware git tree on NXP github since it was
migrated here from qoriq-open-source github.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-02-13 10:01:50 +01:00
Yangbo Lu
841ad46b90 layerscape: remove USB configs for 64-bit
Removed USB configs for 64-bit device since they're
already in kmod package.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-02-13 10:01:50 +01:00
Yangbo Lu
6e9a5f4db4 layerscape: remove USB and TI specific configs for 32-bit
This patch is to remove USB configs for 32-bit device since
they're already in kmod package. Also removed TI platform
specific configs.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-02-13 10:01:50 +01:00
Yangbo Lu
1a28100e68 layerscape: update patches-4.9 to LSDK1712
Patches changes
- Updated patches-4.9 to NXP LSDK1712 linux-4.9.
- Merged changes of patch 303 into integrated patch 201.
- Split changes of patch 706 into dpaa part and dpaa2
  part, and merged these changes into integrated patches
  701 and 705.
- Removed patch 819 since ehci-fsl driver could be compiled now.
- Refreshed these patches.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-02-13 10:01:49 +01:00
Yangbo Lu
3a0fa1e7b8 layerscape: update restool to 2017-12-03
Updated restool to 2017-12-03 and removed patches
since the new version had involved them.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-02-13 10:01:49 +01:00
Yangbo Lu
5f36f3193f layerscape: update build guide in README
Added package feeds updating and installing in build guide
of README.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-02-13 10:01:49 +01:00
Henryk Heisig
a338491a30 ar71xx: add support for TP-Link RE355
This device is identical as TP-Link RE450
RE355 is a dual-band AC1200 router, based on Qualcomm/Atheros
QCA9558+QCA9880.

Specification:

720/600/200 MHz (CPU/DDR/AHB)
64/128 MB of RAM (DDR2)
8 MB of FLASH (SPI NOR)
3T3R 2.4 GHz
3T3R 5 GHz
1x 10/100/1000 Mbps Ethernet
7x LED, 3x button
UART header on PCB

Flash instruction:
Web:
Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin
and use OEM System Tools - Firmware Upgrade site.

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2018-02-13 09:21:20 +01:00
Philip Prindeville
78f5af626c kmod-sched: add sch_multiq to extra schedulers
For hardware that supports multiple h/w output queues, add
a compatible scheduler (NET_SCH_MULTIQ).

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2018-02-13 09:21:20 +01:00
Daniel Golle
267873ac9b
base-files: don't evaluate block-device uevent
Current code and also before commit da52dd0c83 was vulnerable to shell
injection using volume lables in the GPT partition table of block
devices. Given that partition names can be freely defined in GPT tables
we really shouldn't evaluate a string which is potentially crafted with
evil intentions. Hence rather use `export -n` to absorb the uevent's
variables into the environment.

Fixes commit da52dd0c83 (base-files: quote values when evaluating uevent)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[mschiffer@universe-factory.net: suggested export -n usage]
2018-02-13 00:01:44 +01:00
Daniel Gimpelevich
49d3c5f057 kernel: add IEEE-1284 parallel port support
The kmod-lp package included both lp.ko and ppdev.ko, but ECP device
drivers may or may not require lp NOT to be loaded, needing only ppdev.
Additionally, There were no packages for any parport interface modules,
such as uss720 or parport_pc, provided here. It has not been otherwise
possible to use PC-style parport hardware for kmod-lp.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
2018-02-12 15:21:43 +01:00
Jonas Gorski
8fdfba3d1a brcm63xx: switch to kernel 4.9
Now that we have support for it, let's switch to kernel 4.9.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-02-12 11:45:33 +01:00
Jonas Gorski
cf90313ab2 ar7: switch to kernel 4.9
With generic run tested and ac49x compile tested, and no complaints so
far, let's switch to 4.9.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-02-12 11:45:33 +01:00
Jonas Gorski
09bc44454f ar7: fix ac49x compilation with 4.9
This will introduce a warning on 3.18, but fixes an error when
compiling for 4.9.

Fixes: cf9e0a59aa ("ar7: add kernel 4.9 support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-02-12 11:45:33 +01:00
John Crispin
a464fba7eb Revert "mediatek: activate fpu feature flag"
This reverts commit 3594447a7d.

This causes the userland to not come up properly

Signed-off-by: John Crispin <john@phrozen.org>
2018-02-12 11:36:24 +01:00
Russell Senior
89a0fed2a2 tools: update patch to v2.7.6
Removes a redundant patch with a fix already upstream.  Build tested on
apm821xx (PPC).

Signed-off-by: Russell Senior <russell@personaltelco.net>
2018-02-12 16:27:56 +08:00
Jonas Gorski
e2ec3f7550 mvebu: fix sysupgrade from 17.04 for clearfog pro
When clearfog was renamed to clearfog pro, it broke sysupgrade from
17.04 as the new images now get rejected as incompatible. Fix this by
adding the legacy boardname to the compatible devices.

Fixes: ec4a8c6dee ("mvebu: ClearFog renamed upstream to ClearFog Pro")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-02-11 23:15:05 +01:00
Jonas Gorski
1ba38f6100 brcm63xx: add kernel 4.14 support
Add support for kernel 4.14. Increases compressed kernel size by ~64k
compared to 4.9.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-02-11 23:15:05 +01:00
Jonas Gorski
592472f60f broadcom-wl: fix compilation with 4.14
The last_rx field was removed from net_device. Since the field wasn't
used by the generic subsystem, and the driver only writes to it, just
remove the usage.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-02-11 23:15:05 +01:00