Commit graph

16534 commits

Author SHA1 Message Date
Rafał Miłecki
4eb376586c kernel: bgmac: use upstream accepted patches
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-22 10:01:04 +02:00
Martin Blumenstingl
c6164d9610 lantiq: fix building AVM/EVA sysupgrade images on NOR devices
Device/AVM unconditionally inherits Device/NAND, which changes the
sysupgrade image to sysupgrade-tar (instead of a "raw" sysupgrade image
as used in the Device/Default template).
This moves the Device/NAND call to the FRITZ3370 device definition, as
this is the only AVM/EVA device that uses NAND.
Additionally we have to define the IMAGE_SIZE for the AVM/EVA NOR
devices to ensure that the images are not discarded.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-08-22 07:43:11 +02:00
John Crispin
00516611bd ipq806x: add usb pins to r7800 dts file
Signed-off-by: John Crispin <john@phrozen.org>
2016-08-22 07:43:11 +02:00
Jo-Philipp Wich
35be928466 imx6: fix generating bootfs in imagebuilder (FS#102)
The image builder does not bundle sub-directories within $(KERNEL_BUILD_DIR),
therfore the intermediate "ventana-uImage.boot" directory is not shipped,
leading to failures with "make image" later on.

To circumvent the issue, store the intermediate boot files as tar archive
instead of putting them into a directory to ensure that they end up in the
final image builder tarball. Fixes FS#102

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-20 20:23:32 +02:00
Mathias Kresin
c9e6b173f7 ramips: fix build of TRENDnet TEW-69xGR images
The image generation for TEW-691GR and TEW-692GR was broken since
79d02229 due to the move of the UMedia recipe to another Makefile.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-20 11:47:25 +02:00
Mathias Kresin
c892f37b30 ramips: move umedia build step to Makefile
Some rt3883 based boards need this one as well.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-20 11:47:25 +02:00
Mathias Kresin
bcd2113a32 ramips: TEW-691GR: fix switch and wireless
Due to the missing phy-mode setting, the switch wasn't initialised.

The wireless requires an eeprom to work. Use the same mac addresses as
the stock firmware.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-20 11:47:25 +02:00
Mathias Kresin
a7c6cf5182 ramips: TEW-692GR: fix switch and wireless
The AR8327 initvals were not copied to the DTS during the switch from
mach file to device tree and broke the switch on the device.

The former used PORT6 related initvals were wrong and have been
corrected.

The phy mode setting for the switch was missing in the DTS as well.

The wireless requires an eeprom to work. The dual band wireless chips
have both bands enabled by default but only one band per chip is
working.

The stock firmware uses the following mac addresses:

LAN:    AA:BB:CC:DD:EE:E4
WAN:    AA:BB:CC:DD:EE:E4
2.4GHz: AA:BB:CC:DD:EE:E4
5 GHz:  AA:BB:CC:DD:EE:E8

Assuming the mac address range :E4 to :E8 is reserved for this device,
the MAC addresses were reorder to have a unique MAC address for each
interface:

LAN:    AA:BB:CC:DD:EE:E4
2.4GHz: AA:BB:CC:DD:EE:E4
WAN:    AA:BB:CC:DD:EE:E5
5 GHz:  AA:BB:CC:DD:EE:E8

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-20 11:45:45 +02:00
Mathias Kresin
05912a304c ramips: rt3883: fix dtc compiler warning
Fixes the following compiler warning:

Warning (reg_format): "reg" property in /ethernet@10100000/port@0 has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /ethernet@10100000/port@0
Warning (avoid_default_addr_size): Relying on default #size-cells value for /ethernet@10100000/port@0

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-20 11:42:42 +02:00
Sigurd Hogsbro
63857a2d6a lantiq: generate switch configuration for BTHOMEHUBV2B.
Split from HH3A as it appears to have a different switch.
https://en.wikipedia.org/wiki/BT_Home_Hub#Models_and_technical_specifications

Signed-off-by: Sigurd Hogsbro <sigurd@hogsbro.org>
2016-08-20 05:35:42 +02:00
Alexey Brodkin
334fdea08d archs38: Merge sd and ramfs subtargets in generic again
As it turned out we may actually build both initramfs and
SD-based images in one run with just a small tweak in
existing image/Makefile and so we do here.

We're back with one "generic" target for all ARC HS38-based bords.

Kudos to John for his patience and very helpful tips!

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Jo-Philipp Wich <jo@mein.io>
2016-08-20 05:33:47 +02:00
Daniel Golle
f71f7f0df1 oxnas: set preinit interface in /etc/board.d/02_network
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-08-19 17:53:50 +02:00
Daniel Golle
ef4e511a81 kernel: replace cosmetic UBIFS patches with what went upstream
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-08-19 17:53:50 +02:00
Rafał Miłecki
28d641be43 bcm53xx: update copy of ASM entry flushing whole D-cache
Previous version was based on code from kernel 2.6.22 with Broadcom two
trivial modifications. This updates the copy to the version from current
kernel and refreshes the patch.

This was tested for regressions on Netgear R6250 (BCM4708A0), D-Link
DIR-885L (BCM4709C0) and Tenda AC9 (BCM47189B0).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-19 12:47:58 +02:00
Rafał Miłecki
1bef5050ef bcm53xx: build Tenda AC9 image
We finally got kernel booting on this device and LAN ports are working,
so it won't "brick" the device. One more big missing thing is WAN port
support. It requires fix for BCM53125 to get switch port 5 working.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-19 11:38:44 +02:00
Rafał Miłecki
5e885c09c6 bcm53xx: switch back to standalone ASM entry flushing cache
Over a year ago in a commit ac96a1665a ("bcm53xx: update Disable MMU
and Dcache during decompression") we switched to Florian's patch for
workarounding CFE bug. The main difference was using a part of existing
__armv7_mmu_cache_flush instead of implementing flushing separately.

This worked well for Northstar devices but doesn't work for BCM53573 as
these devices simply don't start booting with Florian's patch. It's
because of the ldmfd ASM instruction in the __armv7_mmu_cache_flush.

So this commit switches back to using standalone implementation. This
time instead of copying Broadcom's copy of cache-v7.S, we just make a
copy of the original file on our own. Unfortunately we can't cross-dir
compile cache-v7.S from ../../mm/ as that one also adds __INITDATA with
define_cache_functions v7 which would just trigger
> Error: unrecognized/unsupported machine ID (r1 = 0x0000007f).

The only real change Broadcom did in copied .S file was modifying mcr
instruction to use c6 instead of c14. It isn't clear to me if we really
need it, but let's use it for now.

By the way we also update commit message of the
[PATCH] ARM: BCM5301X: Disable MMU and Dcache during decompression

This makes kernel booting on BCM53573 successfully.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-19 11:38:44 +02:00
Rafał Miłecki
d22ae5e888 bcm53xx: package drivers for Northstar USB PHYs
We don't use them yet as we still init PHY in controller driver but they
will be needed soon.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-19 11:38:44 +02:00
Rafał Miłecki
31fada8bec bcm53xx: generate proper network config for Tenda AC9
It's a more complex device with 2 interfaces on the SoC, one we can use
for LAN and another for WAN.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-18 10:40:49 +02:00
John Crispin
18eebfe4e5 mvebu: fix boot stalls on WRT1900AC V1
Signed-off-by: John Crispin <john@phrozen.org>
2016-08-18 09:49:18 +02:00
Piotr Dymacz
f478fba663 ar71xx: add support for Zbtlink ZBT-WE1526
Zbtlink ZBT-WE1526 is based on Qualcomm Atheros QCA9531 v2.
Short specification:

- 650/400/200 MHz (CPU/DDR/AHB)
- 5x 10/100 Mbps Ethernet
- 1x USB 2.0
- 128 MB of RAM (DDR2)
- 16 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- two external, non-detachable antennas
- 8x LED, 1x button
- UART header (pinout: VCC, RX, TX, GND)

Flash instruction:

Use sysupgrade in vendor firmare which is based on OpenWrt.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-08-18 09:49:18 +02:00
John Crispin
d7e4b9babb ipq806x: sync with latest patches sent by QCA
Signed-off-by: John Crispin <john@phrozen.org>
2016-08-18 09:49:18 +02:00
Rafał Miłecki
27f47f6ad4 kernel: bgmac: add support for BCM53573
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-18 06:59:44 +02:00
Rafał Miłecki
83f6cf649a kernel: bgmac: fix regression in MII registration
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-18 06:59:43 +02:00
Rafał Miłecki
7264df3886 kernel: bgmac: backport 3 remaining small fixes
This makes bgmac in sync with upstream verison.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-17 12:55:25 +02:00
Rafał Miłecki
93f2aa44f7 kernel: bgmac: backport patch adding platform support
It also reworks bcma support by moving specific code to separated file.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-17 12:41:20 +02:00
Rafał Miłecki
533d16822c kernel: bgmac: backport patch switching to feature_flags
It was needed upstream to avoid bcma references in the main code. To
match this new code our patch adding SRAB was also updated.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-17 09:31:45 +02:00
Alexey Brodkin
df4f41261c archs38: Introduce images for SD-cards
Historically on ARC we started from initramfs-based images because:
 a) It was much easier to debug especially when toolchain and other
    components were changing quite dynamically
 b) It was our usual approach for embedded Linux

But now with ARC port of Lede/OpenWRT getting more stable and mature
we're ready for more real-life scenarios with FS permanently stored
on SD-card. This essentially benefits from ability to setup devices
that survive reboots with all settings and extra packages kept in place.

Still we keep an ability to build images with initramfs.
This allows us to use storage-less simulators for testing still.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: John Crispin <john@phrozen.org>
2016-08-16 12:20:32 +02:00
Alexey Brodkin
7abf9eda8a archs38: Remove MMC kernel modules, they are built-in now
If we want to boot from SD-card we need to have corresponding
drivers already built-in so there's no point in having these
modules.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-08-16 12:20:12 +02:00
Alexey Brodkin
83bd1f81c4 archs38: Update kernel configuration
Now when we're switching to FS on SD-card it's necessary to have
full stack of MMC block & FC drivers built-in otherwise kernel won't
be able to mount FS with needed modules.

Also we enable parsing of input parameters passed to the kernel by
U-Boot. Otherwise kernel won't know where to look for command line and
what's worse device tree blob (we had to disable this by default for
cases when kernel is loaded by JTAG and core registers may have
undefined state lading to kernel going bonkers).

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-08-16 12:19:56 +02:00
Alexey Brodkin
5f55df433d archs38: Reduce generalization
As support of ARC HS38 in OpenWRT/Lede matures we don't need
debug-only output binaries any longer, so purging vmlinux for
AXS10x boards.

As for uImage for nSIM it makes completely no sense because there's no
way to run U-Boot on nSIM.

So we remove add_archs38_XXX scripts making code more compact and
cleaner.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-08-16 12:19:01 +02:00
Alexey Brodkin
a3cde14f5a arc: use patched .dts from sources
Instead of using off-the-tree .dts files for ARC boards we're
switching to use in-tree ones. And for that to work properly
we apply upstream patch that adds currently missing "model"
property.

Upstream patch and discussion could be found here:
http://lists.infradead.org/pipermail/linux-snps-arc/2016-August/001394.html

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Cc: John Crispin <john@phrozen.org>
2016-08-16 12:18:28 +02:00
Rafał Miłecki
f2103c50ab kernel: backport bgmac patch moving MDIO code into separated file
This prepares bgmac for the biggest change: dropping bcma dependency.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-17 00:15:27 +02:00
Rafał Miłecki
6d3fbf2818 kernel: backport simple bgmac cleanup & fix from Jon
These 2 trivial patches will be followed by a bigger bgmac rework so
they are worth backporting in a separated patch.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-16 23:32:05 +02:00
Rafał Miłecki
2803527237 kernel: add BCM53573 flash fix sent upstream
This fixes flash corruptions. It touches bcm47xxsflash driver shared
between brcm47xx and bcm53xx so put it in generic.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-16 22:42:00 +02:00
Rafał Miłecki
13e20e6956 kernel: update bgmac by adding Florian's upstream changes
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-16 22:42:00 +02:00
John Crispin
99a1888287 swconfig: revert the portmapping patches, they seem to cause a segfault
Revert "kernel/swconfig: remove obsolete portmapping feature from swconfig"

This reverts commit 675407baa4.

Revert "swconfig: remove obsolete portmapping feature"

This reverts commit fca1eb349e.

Signed-off-by: John Crispin <john@phrozen.org>
2016-08-16 10:20:01 +02:00
Rafał Miłecki
5846620890 bcm53xx: fix warning caused by m25p80 patch
It was adding unused variable:
drivers/mtd/devices/m25p80.c: In function 'm25p80_write':
drivers/mtd/devices/m25p80.c:85:6: warning: unused variable 'i' [-Wunused-variable]
  int i;
      ^

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-16 17:14:14 +02:00
Rafał Miłecki
09b9dd730c kernel: support watchdog (and so reboot) on BCM53573
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-16 17:14:14 +02:00
Martin Schiller
528b769d42 lantiq/xrx200-net: Add support for eth0 as WAN interface
Use priv->wan instead of priv->id as indicator if packets should go to the
Ethernet WAN group (DPID=1) or not (DPID=0). This way, it's independant of
interface names or indexes.

Signed-off-by: Martin Schiller <mschiller@tdt.de>
2016-08-15 21:52:04 +02:00
Matti Laakso
9f5ee6f6c0 lantiq: add kmod-ledtrig-usbdev to device packages which have usb led
By default USB LEDs are associated with usbdev trigger. However,
not all devices which have USB LEDs have kmod-ledtrig-usbdev in their
list of default packages. Add it to the relevant devices.

Signed-off-by: Matti Laakso <matti.laakso@outlook.com>
2016-08-15 15:32:38 +02:00
Stijn Tintel
d106c7d56b rb532: rename patches directory to patches-4.1
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2016-08-15 15:32:37 +02:00
Stijn Tintel
74aecc2d45 orion: rename patches directory to patches-3.18
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2016-08-15 15:32:37 +02:00
Stijn Tintel
d99169536e omap: rename patches directory to patches-4.4
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2016-08-15 15:32:37 +02:00
Stijn Tintel
fa5eab6ec5 au1000: rename patches directory to patches-3.18
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2016-08-15 15:32:37 +02:00
Yousong Zhou
12cdf2bfc2 malta: enable be64 and le64 subtargets
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-08-15 15:32:36 +02:00
Yousong Zhou
1ba88eabd5 octeon: remove the now redundant cpu cflags override
The flags are now properly defined in include/target.mk

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-08-15 15:32:36 +02:00
Martin Schiller
ddd1882811 lantiq/xrx200-net: add interrupt for second DMA TX channel to vr9.dtsi
Signed-off-by: Martin Schiller <mschiller@tdt.de>
2016-08-15 15:32:36 +02:00
Martin Schiller
8f02f7c7f8 lantiq/xrx200-net: fix "tx ring full" error by introducing second DMA TX channel
With an own DMA TX channel for each network device (eth0 + eth1) there
won't be any "tx ring full" errors any more.

This patch also move the spinlocks to the channel level instead of locking
the whole xrx200_hw structure.

Signed-off-by: Martin Schiller <mschiller@tdt.de>
2016-08-15 15:32:36 +02:00
John Crispin
675407baa4 kernel/swconfig: remove obsolete portmapping feature from swconfig
Signed-off-by: John Crispin <john@phrozen.org>
2016-08-15 15:18:35 +02:00
Chuanhong Guo
d1b20a3659 ar71xx: fix profile name of Mercury MW4530R
The mw4530r-v1 profile in tp-link.mk is for Mercury MW4530R.
There is no such a device called TL-WDR4530.
Also change MERCURY to Mercury in /lib/ar71xx.sh

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2016-08-15 15:18:35 +02:00