Commit graph

893 commits

Author SHA1 Message Date
John Crispin
e3003ea2a9 fix prepare_generic_squashfs
prepare_generic_squashfs was called twice on the generated images breaking mount_root

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36349
2013-04-17 11:54:09 +00:00
John Crispin
8001e6a689 fix rt305x gpio
https://dev.openwrt.org/ticket/13359

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36343
2013-04-16 06:58:18 +00:00
Gabor Juhos
604395650a kernel: update linux 3.8 to 3.8.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36332
2013-04-14 09:25:53 +00:00
John Crispin
d3a46c4b7f update rt2880 config-3.8
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36327
2013-04-12 18:57:01 +00:00
John Crispin
92259c4803 fix up the rt2880 patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36326
2013-04-12 18:56:53 +00:00
John Crispin
a6424245e6 fix RT-N15 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36325
2013-04-12 18:56:44 +00:00
John Crispin
7af1fa46ad update rt2880.dtsi
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36324
2013-04-12 18:56:36 +00:00
John Crispin
fb47fd0d6b unbreak portmapping - typo fix
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36293
2013-04-09 14:39:01 +00:00
John Crispin
bc7b310959 move memory detect node to dtsi files
Signed-of-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36290
2013-04-09 14:19:36 +00:00
John Crispin
48feea4861 Add Netgear WNCE2001 (OF version)
Add Netgear WNCE2001.

This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.

Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming

The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.

The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.

http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 36289
2013-04-09 14:19:33 +00:00
John Crispin
e468abcae0 remove bootargs from dts
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36288
2013-04-09 14:19:28 +00:00
John Crispin
82c3b7ce26 add ofpart info to the devicetrees
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36287
2013-04-09 14:19:24 +00:00
John Crispin
f1e9d30ffc add sample swconfig portmap
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36286
2013-04-09 14:19:20 +00:00
John Crispin
fcd962cc71 set of_node before registring the switch
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36285
2013-04-09 14:19:17 +00:00
Gabor Juhos
130f67210a ramips: TEW-691GR.dts fixes
* fix pinmux settings
* remove spi node
* add nor-flash node
* enable mdio-bus and add phy handle

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36276
2013-04-08 12:34:17 +00:00
Gabor Juhos
a4a148f222 ramips: rt3883: enable the AR8216 driver
It is needed for the TEW-69{1,2}GR boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36275
2013-04-08 12:34:15 +00:00
Gabor Juhos
a9d977b2af ramips: add profile for the Omnima EMB-HPM board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36274
2013-04-08 11:12:04 +00:00
Gabor Juhos
82705b30b3 ramips: OMNI-EMB-HPM.dts fixes
* add mdio-bus and phy nodes
* set phy-handle for the ethernet node
* define flash partiions
* cleanup flash node properties

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36273
2013-04-08 11:12:03 +00:00
Gabor Juhos
909fabe574 ramips: add mdio-bus node to rt3883.dtsi
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36272
2013-04-08 11:12:02 +00:00
Gabor Juhos
78ee80f2e8 ramips: fix MDIO/PHY handling
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36271
2013-04-08 11:12:01 +00:00
Gabor Juhos
30e5bae84a ramips: fix console speed for OMNI-EMB-HPM
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36270
2013-04-08 08:24:51 +00:00
Gabor Juhos
cd7ce5226d ramips: avoid invalid pointer dereference in pinmux code
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36269
2013-04-08 08:24:50 +00:00
Gabor Juhos
4c85227cf4 ramips: TEW-692GR.dts fixes
* fix pinmux settings
* remove spi node
* add PCI node
* add nor-flash node

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36268
2013-04-08 07:11:35 +00:00
Gabor Juhos
97635d7a8e ramips: add PCI node into RTN56U.dts
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36264
2013-04-07 20:56:22 +00:00
Gabor Juhos
474264f64c ramips: add PCI node for rt3883.dtsi
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36263
2013-04-07 20:56:21 +00:00
Gabor Juhos
6c8951313c ramips: rt3883: enable PCI support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36262
2013-04-07 20:56:20 +00:00
Gabor Juhos
b6b0a8fbee ramips: fix RT3883 PCI driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36261
2013-04-07 20:56:18 +00:00
Gabor Juhos
1700bf5b2e ramips: refresh patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36260
2013-04-07 17:05:05 +00:00
Gabor Juhos
6de8743e44 ramips: add missing cpu-feature-override.h files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36259
2013-04-07 17:05:04 +00:00
Gabor Juhos
68875710fd ramips: fix broken patch name
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36258
2013-04-07 16:26:27 +00:00
Gabor Juhos
16d0ce52b0 ramips: fix polarity of GPIO buttons for RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36257
2013-04-07 16:24:33 +00:00
Gabor Juhos
d1f28c6d1f ramips: add nor-flash node for the RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36249
2013-04-07 14:46:11 +00:00
Gabor Juhos
0c3c29ca38 ramips: fix pinmux settings for the RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36248
2013-04-07 14:46:10 +00:00
Gabor Juhos
66fbe78a93 ramips: pinmux fixes
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36247
2013-04-07 14:46:09 +00:00
Gabor Juhos
aedf05caa0 ramips: remove trailing whitespaces from dts files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36246
2013-04-07 13:32:37 +00:00
Gabor Juhos
017aabe292 ramips: handle PCI interrupts in plat_irq_dispatch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36245
2013-04-07 13:25:38 +00:00
John Crispin
811f7f9f2d fix typos inside dts files
Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de>

SVN-Revision: 36244
2013-04-07 11:47:03 +00:00
John Crispin
709b19ed9f fix default commandline in dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36243
2013-04-07 11:46:54 +00:00
Gabor Juhos
85675528da ramips: add cfi_cmdset_0002 patches
The parallel flash access on the RT-N56U is broken
without those patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36242
2013-04-07 11:37:15 +00:00
Gabor Juhos
10d8e4b66c ramips: remove top-level {address,size}-cells properties from .dts files
Those are defined in the SoC specific .dtsi files.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36237
2013-04-07 08:19:10 +00:00
Gabor Juhos
756b810178 ramips: fix ethernet switch node in DIR-645.dts
Fix a typo in the node name and add vendor prefix
for the compatible string.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36231
2013-04-06 17:19:35 +00:00
Gabor Juhos
1ef39b43dd ramips: remove spi node from RTN56.dts
The RT-N56U board uses a parallel flash.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36223
2013-04-06 12:37:40 +00:00
Gabor Juhos
d57e662cda ramips: fix ethernet switch node in RTN56U.dts
The RT-N56U uses an RTL8367M switch.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36222
2013-04-06 12:37:38 +00:00
Gabor Juhos
4becd8590c ramips: rt3883: enable the RTL8367 driver
That is needed by the Asus RT-N56U board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36221
2013-04-06 12:37:37 +00:00
Gabor Juhos
348640f4b3 ramips: rt3883: sync 3.8 config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36217
2013-04-06 12:37:31 +00:00
John Crispin
d16de0b69f fix typo pinmmux -> pinmux
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36216
2013-04-06 11:46:34 +00:00
Gabor Juhos
f78c902cfd kernel: update linux 3.8 to 3.8.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36215
2013-04-06 11:40:44 +00:00
John Crispin
df7af06f1f fix dir-615 h1 network config
http://patchwork.openwrt.org/patch/3527/

Signed-off-by: Daniel Petre <dani@ip6.ro>

SVN-Revision: 36213
2013-04-05 23:37:45 +00:00
John Crispin
e1a74d8ff7 fix typo that made gpiomuxing fail
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36212
2013-04-05 23:10:42 +00:00
John Crispin
93899a1329 add profile for tenda w150m board
http://patchwork.openwrt.org/patch/3371/

Signed-off-by: Chi Zhang <zhangchi866@gmail.com>

SVN-Revision: 36176
2013-04-03 10:00:21 +00:00
John Crispin
7e54357bd5 fix ALL5002 default package selection
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36175
2013-04-03 10:00:16 +00:00
John Crispin
37401dca92 Build WW factory image for DAP-1350
http://patchwork.openwrt.org/patch/3466/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36174
2013-04-03 10:00:12 +00:00
John Crispin
910b705155 add Huawei D105
http://patchwork.openwrt.org/patch/3510/

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 36173
2013-04-03 10:00:08 +00:00
John Crispin
c1710901c5 add profile for the Edimax 3g-6200NL board
http://patchwork.openwrt.org/patch/3214/

Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net>

SVN-Revision: 36172
2013-04-03 10:00:03 +00:00
John Crispin
f3643374c4 there is no ttyS1 console
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36171
2013-04-03 09:59:59 +00:00
John Crispin
99e0ff1123 make v3.8 the default
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36170
2013-04-03 09:59:55 +00:00
John Crispin
c8d5f5e0ef add new image/Makefile
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36169
2013-04-03 09:59:51 +00:00
John Crispin
770b28f146 add the dts files that describe the boards in future
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36168
2013-04-03 09:59:46 +00:00
John Crispin
2328e8389e fix upvel profile names
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36167
2013-04-03 09:59:41 +00:00
John Crispin
94972a5268 fix rt3883 config-3.8
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36166
2013-04-03 09:59:37 +00:00
John Crispin
0716ae8abe fix rt305x config-3.8
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36165
2013-04-03 09:59:33 +00:00
John Crispin
dce4945972 mark rt288x broken until the test hardware arrives in the mail
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36164
2013-04-03 09:59:16 +00:00
John Crispin
46f141637c add patches for v3.8
Signed-off-by: John Crsipin <blogic@openwrt.org>

SVN-Revision: 36163
2013-04-03 09:59:10 +00:00
John Crispin
4f86ea43ca remove old ralink 3.8 patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36162
2013-04-03 09:58:48 +00:00
John Crispin
d4db00205d move files to files-3.7
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36161
2013-04-03 09:58:44 +00:00
John Crispin
86a691144b add feature gpio
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36160
2013-04-03 09:58:37 +00:00
Gabor Juhos
07532dca7f kernel: update linux 3.8 to 3.8.3
Also refresh the related generic/platform patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36039
2013-03-15 14:39:51 +00:00
John Crispin
b22cbac68f make sure errors get sent to /dev/null
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 35988
2013-03-12 13:52:40 +00:00
Gabor Juhos
fe3df4b593 ramips: add profile and build image for the Upvel UR-326N4G board
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35972
2013-03-11 21:02:45 +00:00
Gabor Juhos
d543f4b771 ramips: add user-space support for the Upvel UR-326N4G board
[juhosg: fix mac address setup]

Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35971
2013-03-11 21:02:43 +00:00
Gabor Juhos
3c2ef04a0e ramips: add kernel support for the Upvel UR-326N4G board
[juhosg: add missing symbols to config-3.{7,8}]

Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35970
2013-03-11 21:02:40 +00:00
Gabor Juhos
23b3b3a194 kernel: update linux 3.7 to 3.7.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35860
2013-03-03 13:57:40 +00:00
Gabor Juhos
8798c73860 ramips: set -march=24kec for rt305x and rt3883 to enable use of DSP extension
All known rt305x and rt3883 implementations support at
least the 24kec instruction set which includes the DSP
extension. For rt288x, the previous value mips32r2 is
kept.

The cpu target is now set per sub-archtecture, according
to cpu-feature-overrides.h of each SoC family.

[juhosg: define ARCH_PACKAGES variable for rt305x/rt3883
in order to differentiate the packages compiled with
the 24Kec option.]

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35853
2013-03-03 12:47:31 +00:00
Gabor Juhos
59ad675ef1 ramips: add user-space detection for ALL5002/ALL5003
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35852
2013-03-03 12:47:28 +00:00
Gabor Juhos
50e51e5ecc ramips: indicate support for ALL5003
add ALL5003 to board description in mach-all5002.c
adapt detection in user-space accordingly
(no functional changes)

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35851
2013-03-03 12:47:25 +00:00
Gabor Juhos
367ab0a40f ramips: enhance user-space board detection
Similar to ar71xx, detect only once and cache the strings in
/tmp/sysinfo/model and /tmp/sysinfo/boardname.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35850
2013-03-03 12:47:02 +00:00
Gabor Juhos
1ba2272ca5 ramips: fix whitespace in /lib/ramips.sh
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35849
2013-03-03 12:46:08 +00:00
Gabor Juhos
5412b6f32e ramips: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35801
2013-02-25 21:28:42 +00:00
Gabor Juhos
a08646642e ramips: image: don't break make process if mkimage command fails
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35800
2013-02-25 21:28:40 +00:00
Gabor Juhos
275db5b4c4 ramips: remove port_power_off field from ehci_platform_data
It is removed in 3.8. Also add a revert patch for 3.7.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35799
2013-02-25 21:28:38 +00:00
Gabor Juhos
5e1d6ce077 ramips: remove __dev_{init,exit} annotations
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35798
2013-02-25 21:28:34 +00:00
Jonas Gorski
1cd62d06ca ramips: print image build warnings/errors to stderr
Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35721
2013-02-21 11:45:33 +00:00
Gabor Juhos
90011a99f3 ramips: migrate to common led helper functions
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35652
2013-02-18 09:56:29 +00:00
Gabor Juhos
3f749d1e8e kernel: update linux 3.7 to 3.7.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35644
2013-02-17 21:32:42 +00:00
Gabor Juhos
4375dae6d3 ramips: fix kmod-usb2 package name
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35628
2013-02-16 17:26:52 +00:00
Gabor Juhos
7fd8525853 ramips: use the new macaddr_* helpers instead of maccalc
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35615
2013-02-16 11:50:25 +00:00
Gabor Juhos
753d713e92 ramips: use the mtd_get_mac_* helpers
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35613
2013-02-16 11:50:21 +00:00
Gabor Juhos
162b8e23a5 kernel: update linux 3.7 to 3.7.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35604
2013-02-15 07:36:15 +00:00
Gabor Juhos
bae4bfe3f8 kernel: update linux 3.7 to 3.7.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35571
2013-02-12 09:51:11 +00:00
Gabor Juhos
08ff976720 kernel: update linux 3.7 to 3.7.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35476
2013-02-04 10:02:56 +00:00
Gabor Juhos
9ed81a91f3 ramips: build image for the Omnima EMB HPM board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35468
2013-02-02 17:21:06 +00:00
Gabor Juhos
813aec6796 ramips: add user-space support for the Omnima EMB HPM board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35467
2013-02-02 17:21:05 +00:00
Gabor Juhos
d578f3ac38 ramips: rt3883: add kernel support for the Omnima EMB HPM board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35466
2013-02-02 17:21:01 +00:00
Gabor Juhos
b99b2ff553 ramips: add userspace support for the Edimax BR-6425
[juhosg: remove sysupgrade changes]

Signed-off-by: Yuval Adam <yuv.adm@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35463
2013-02-02 17:01:50 +00:00
Gabor Juhos
0a42e38bad ramips: add kernel support for the Edimax BR-6425 board
Signed-off-by: Yuval Adam <yuv.adm@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35462
2013-02-02 17:01:47 +00:00
Gabor Juhos
fb2e2a56d7 refresh kernel configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35434
2013-02-01 17:28:40 +00:00
Gabor Juhos
562ba537fc kernel: update linux 3.7 to 3.7.5
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35390
2013-01-29 18:29:45 +00:00
John Crispin
756a7c5451 fix for non-blinking LAN LEDs
https://dev.openwrt.org/ticket/12830

SVN-Revision: 35359
2013-01-28 18:06:31 +00:00
John Crispin
d93706154b ramips: reset switch on single-port devices
Signed-off-by: Daniel Gole <dgolle@allnet.de>

SVN-Revision: 35356
2013-01-28 17:44:41 +00:00
Gabor Juhos
15be1c9ee7 kernel: update linux 3.7 to 3.7.4
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35318
2013-01-24 17:08:37 +00:00
Gabor Juhos
ed6d399f8d ramips: add profile and build image for the Tenda 3G300M
Factory image should be used to flash from
original firmware.

[juhosg: use the GENERIC_4M template]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35246
2013-01-19 17:05:07 +00:00
Gabor Juhos
9891603eb5 ramips: add user-space support for the Tenda 3G300M
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35245
2013-01-19 17:05:06 +00:00
Gabor Juhos
7eff5d2df0 ramips: add kernel support for the Tenda 3G300M
Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons
and seven leds.

Factory image should be used to flash from original firmware.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35244
2013-01-19 17:05:03 +00:00
Gabor Juhos
f7a943694f ramips: use MkImage for Hauppauge Broadway, Netcore NW718 and Tenda W306R V2.0
These targets need custom image names specified in the uImage header.
MkImage accepts an optional 4th argument to do exactly that. Reuse the
facility to generate factory images.

Compile-tested, the generated files inspected with "file" utility.

[juhosg:
 - keep the factory.bin images to avoid users confusion,
 - use GENERIC_4M template for the W306R V2.0
 - update commit log]

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35243
2013-01-19 15:36:13 +00:00
Gabor Juhos
6aebe6a65d ramips: allow to override image name/suffix in GENERIC_{4,8}M macros
Sysupgrade/KRuImage and BuildFirmware/Generic macros
are changed as well.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35242
2013-01-19 15:36:11 +00:00
Gabor Juhos
60dde219d4 ramips: do not stop the build if some targets fail
This becomes crucial when you are using a generic profile to build an image
larger than 4M, e.g. for w502u.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35238
2013-01-19 08:51:45 +00:00
Jo-Philipp Wich
3a2cccda2e all targets: use numerically prefixed uci-defaults file names to better control order of execution
SVN-Revision: 35217
2013-01-18 12:42:53 +00:00
Gabor Juhos
0de21d9747 kernel: update linux 3.7 to 3.7.3
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35216
2013-01-18 11:44:42 +00:00
Felix Fietkau
576aa2af0c ramips: enable BR6425N in kernel config
Though originally contained in the patch applied in r35020, the move to 3.7 in
r34845 lost the kernel .config option. Reintroduce it to config-3.7.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 35191
2013-01-17 09:39:44 +00:00
Gabor Juhos
ff2ce330a5 ramips: remove 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35110
2013-01-12 12:25:30 +00:00
Gabor Juhos
d53f8c3ded ramips: switch to 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35109
2013-01-12 12:25:28 +00:00
John Crispin
f2f9332350 adds support for Edimax BR-6524N
fixes #12754

Signed-off-by: <rq@akl.lt>

SVN-Revision: 35020
2013-01-06 11:11:42 +00:00
John Crispin
569bbe4970 rt5350 switch support fix
RT5350 frame engine need reset frame engine and embedded switch together.

Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>

SVN-Revision: 34969
2013-01-02 11:28:21 +00:00
Gabor Juhos
fb07876f25 ramips: rt305x: fix garbled name in mach-mzk-w300nh2.c
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34934
2012-12-30 08:23:48 +00:00
Gabor Juhos
6708d68c24 ramips: build firmware image for the Planex MZK-W300NH2 Router
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34927
2012-12-29 17:50:40 +00:00
Gabor Juhos
8b1ac2ae37 ramips: add user-space support for the Planex MZK-W300NH2 Router
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34926
2012-12-29 17:50:38 +00:00
Gabor Juhos
d6d06aceb0 ramips: rt305x: add kernel support for the Planex MZK-W300NH2 Router
This is a Japanese market router, for details check
http://www.planex.co.jp/product/router/mzk-w300nh2/. It has only 16MB
RAM, but base OpenWRT install worked fine for days without issues.
Even an image with built-in Luci worked, but don't expect smooth
experience, due to the lack of RAM. Wifi was not extensively tested,
but seems it is working. GPIO LEDs & buttons, factory flash image and
switch config are confirmed working. Tested against revision 34882 +
this patch.

[juhosg: move user-space support and image generation changes into
separate patches]

Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34925
2012-12-29 17:50:35 +00:00
Gabor Juhos
76537041eb ramips: build image for Airlive AIR3GII
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34924
2012-12-29 17:50:34 +00:00
Gabor Juhos
3aad9b4c9b ramips: add user-space support for Airlive AIR3GII
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34923
2012-12-29 17:50:32 +00:00
Gabor Juhos
3fcb8bb0dd ramips: rt305x: add kernel support for AirLive AIR3GII
AirLive AIR3GII is Ralink RT5350F based device with
100Mbps switch, USB port, 4MB flash and 32MB ram.

Works: ethernet (LAN & WAN), wps button, led, USB, sysupgrade
Does not work: wifi (chip RT5350), reset button

[   13.390000] phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset 0x5350 detected.
[   13.400000] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.

Other problem: LAN leds is reverse (lights when not cable
connected and vice versa)

[juhosg: move user-space support and image generation changes into
separate patches]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34922
2012-12-29 17:50:28 +00:00
Felix Fietkau
41a039f464 mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration
SVN-Revision: 34909
2012-12-28 19:17:19 +00:00
Gabor Juhos
69da894432 ramips: fix ASUS WL-330N3G MAC address
The ASUS WL-330N and WL-330N3G has the MAC address stored at
offset 4, not 40. This is verified by reading original ASUS
firmware GPL_WL-330N3G_source.1028/user/rc/common_ex.c and
GPL_WL-330N_source.1021/user/rc/common_ex.c.

Tested on WL-330N3G, it now gets the same MAC as is printed on
the label on the router.

Signed-off-by: Jan Kardell <jan.kardell@arkub.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34877
2012-12-24 06:52:41 +00:00
Gabor Juhos
c5a36f13f0 ramips: fix wifi EEPROM extraction on DIR-615-Dx models
Patch from #12636.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34876
2012-12-24 06:52:38 +00:00
Gabor Juhos
8105c6badd ramips: unify eeprom file name for the built-in wireless MAC
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34860
2012-12-22 16:09:03 +00:00
Gabor Juhos
c81b4475c9 ramips: rt3883: fix build error
The cpuport_cfg field has been renamed to port0_cfg.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34859
2012-12-22 13:50:47 +00:00
Gabor Juhos
b44cdcde8e ramips: add support for 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34845
2012-12-22 12:11:13 +00:00
Gabor Juhos
b81667cb23 ramips: convert to use {e,o}hci-platform driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34843
2012-12-22 12:11:08 +00:00
Gabor Juhos
e1b5eeeaa4 ramips: Add USB support for DAP-1350 platform.
It seems to work as intended, but only lightly tested.

Patch-by: Bryan Steele <brynet@gmail.com>
SIgned-off-by: Gabor Juhos <juhsog@openwrt.org>

SVN-Revision: 34811
2012-12-20 19:17:17 +00:00
Mirko Vogt
e34a4e0c7b Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh)
SVN-Revision: 34793
2012-12-19 16:07:50 +00:00
Gabor Juhos
44b9898251 kernel: update linux 3.6 to 3.6.11
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34748
2012-12-18 14:41:16 +00:00
Gabor Juhos
fe8efb72ca ramips: nuke 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34744
2012-12-17 22:28:11 +00:00
Gabor Juhos
2b378d11c8 kernel: update linux 3.6 to 3.6.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34639
2012-12-11 20:14:39 +00:00
John Crispin
c2ae0ec02a add support for Hauppauge Broadway
This patch introduces OpenWRT support for the base Hauppauge/PCTV Broadway
platform.  It doesn't deal with the TV tuner or transcoder at this point,
but the core functionality is working (Ethernet, wireless, USB, buttons,
LEDs, etc).

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>

SVN-Revision: 34595
2012-12-10 14:13:01 +00:00
Gabor Juhos
2581173660 kernel: update linux 3.6 to 3.6.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34578
2012-12-08 15:01:33 +00:00
Gabor Juhos
e0e43655ce ramips: fix serial console for Belkin F5D8235 v1/v2
Based on a patch from #12533.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34445
2012-12-02 14:16:12 +00:00
Gabor Juhos
44131bd785 ramips: rt305x: add profile and build image for the Asus RT-N13U
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34407
2012-11-29 17:37:14 +00:00
Gabor Juhos
d3994b7408 ramips: rt305x: add user-space support for the Asus RT-N13U
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34406
2012-11-29 17:37:13 +00:00
Gabor Juhos
0ec59e6235 ramips: rt305x: add kernel support for the Asus RT-N13U Wireless-N300 Router
The work has been backported from openwrt-dreambox with
some modifications & code cleanup.

* updated config-3.3
* updated config-3.6
* renamed rt-n13 to rt-n13u
* fixed mach-rt-n13u.c

[juhosg: move user-space support and image generation into separate
patches]

Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34405
2012-11-29 17:37:11 +00:00
Gabor Juhos
c2f018fca2 remove common symbols from 3.6 configs
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34404
2012-11-29 15:21:41 +00:00
Gabor Juhos
1f516235ea remove common symbols from 3.3 configs
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34403
2012-11-29 15:21:35 +00:00
Gabor Juhos
3a4d0ebd5c kernel: update linux 3.6 to 3.6.8
Also refresh the affected patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34402
2012-11-29 07:42:19 +00:00
Gabor Juhos
57b7879a4e ramips: ramips_eth: use Kconfig definition to enable debug
The Kconfig identifier to enable debugging in the driver was different from the
actually used one. Fix that.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34332
2012-11-25 14:25:54 +00:00
Gabor Juhos
21d5df8700 ramips: add DIR-615 D userspace support
Commit 7c8edac25f23c4fc14239fdc293caa1317649944 introduced new machine and
Makefile changes to build images for this target. However, without the userspace
bits a ramips machine can't use wifi as the necessary "eeprom" data is to be
extracted by a hotplug script; also, sysupgrade support and default led
configuration are missing.

An IRC user reported these changes allowed him to use wifi on his hardware.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34331
2012-11-25 14:25:27 +00:00
Gabor Juhos
dd092fd10c ramips: set clk_is_20mhz for rt2x00 on RT3352/RT5350
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34270
2012-11-20 07:19:10 +00:00
Gabor Juhos
ff1e854511 kernel: update linux 3.6 to 3.6.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34227
2012-11-18 08:41:31 +00:00
John Crispin
dd8c625424 previous commit pushed 1 file too many ;)
SVN-Revision: 34179
2012-11-12 21:36:23 +00:00
John Crispin
ced0cf3a94 move ethernet hw init to init/uninit functions
This should fix the stalled irq problem seen by several people.
This is not the real fix, but rather moves the bug to the un/init patch of the driver.
The real bug still needs to be fixed, but this workaround should be suffcient to make
the ethernet stable.

SVN-Revision: 34177
2012-11-12 21:35:01 +00:00
John Crispin
6090ddc896 adds fon20n profile
SVN-Revision: 34112
2012-11-07 20:26:31 +00:00
John Crispin
3991526989 ramips: use kernel 3.6.6
## Booting image at 80800000 ...
   Image Name:   MIPS OpenWrt Linux-3.6.6
   Created:      2012-11-06  14:19:54 UTC

 System Control Status = 0x20440000
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    3560768 Bytes =  3.4 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 32

Starting kernel ...

[    0.000000] Linux version 3.6.6 (daniel@localhost.localdomain) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[    0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Writing ErrCtl register=0000c388
[    0.000000] Readback ErrCtl register=0000c388
[    0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:48
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[    0.090000] pid_max: default: 32768 minimum: 301
[    0.100000] Mount-cache hash table entries: 512
[    0.110000] NET: Registered protocol family 16
[    0.120000] MIPS: machine is Allnet ALL0239-3G
[    0.140000] bio: create slab <bio-0> at 0
[    0.150000] Switching to clocksource MIPS
[    0.160000] NET: Registered protocol family 2
[    0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.210000] TCP: reno registered
[    0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.240000] NET: Registered protocol family 1
[    5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    5.490000] msgmni has been set to 52
[    5.500000] io scheduler noop registered
[    5.510000] io scheduler deadline registered (default)
[    5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[    5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[    5.560000] physmap platform flash device: 00800000 at bf000000
[    5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
[    5.600000] Amd/Fujitsu Extended Query Table at 0x0040
[    5.610000]   Amd/Fujitsu Extended Query version 1.3.
[    5.620000] number of CFI chips: 1
[    5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[    5.640000] Creating 6 MTD partitions on "physmap-flash.0":
[    5.650000] 0x000000000000-0x000000030000 : "u-boot"
[    5.660000] 0x000000030000-0x000000040000 : "u-boot-env"
[    5.680000] 0x000000040000-0x000000050000 : "factory"
[    5.690000] 0x000000050000-0x000000130000 : "kernel"
[    5.700000] 0x000000130000-0x000000800000 : "rootfs"
[    5.710000] mtd: partition "rootfs" set to be root filesystem
[    5.730000] split_squashfs: error occured while reading from "physmap-flash.0"
[    5.740000] 0x000000050000-0x000000800000 : "firmware"
[    5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[    5.780000] TCP: cubic registered
[    5.780000] NET: Registered protocol family 17
[    5.790000] 8021q: 802.1Q VLAN Support v1.8
[    5.820000] Freeing unused kernel memory: 2676k freed
[    6.490000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -

Please press Enter to activate this console. [   10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[   10.170000] Backport based on wireless-testing.git master-2012-09-07
[   10.180000] compat.git: wireless-testing.git
[   10.210000] cfg80211: Calling CRDA to update world regulatory domain
[   10.230000] cfg80211: World regulatory domain updated:
[   10.240000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.250000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.270000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.280000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.300000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.310000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.430000] NET: Registered protocol family 10
[   10.760000] PPP generic driver version 2.4.2
[   10.820000] l2tp_core: L2TP core driver, V2.0
[   10.840000] l2tp_netlink: L2TP netlink interface
[   10.870000] sit: IPv6 over IPv4 tunneling driver
[   10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.060000] NET: Registered protocol family 24
[   11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)
[   11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.510000] device eth0.1 entered promiscuous mode
[   14.520000] device eth0 entered promiscuous mode
[   14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[   14.550000] br-lan: port 1(eth0.1) entered forwarding state
[   14.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33

BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r34079)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------
root@OpenWrt:/#

SVN-Revision: 34111
2012-11-07 20:26:21 +00:00
John Crispin
480892226d ramips: add HAVE_CLK to Kconfig on all ramips socs
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 34110
2012-11-07 20:26:04 +00:00
John Crispin
feb31be6af ramips: add linux-3.6 configuration for ramips socs
Signed-off-by: Daniel Golle <dgolle@allnet.de>

 create mode 100644 target/linux/ramips/rt288x/config-3.6
 create mode 100644 target/linux/ramips/rt305x/config-3.6
 create mode 100644 target/linux/ramips/rt3883/config-3.6

SVN-Revision: 34109
2012-11-07 20:25:55 +00:00
John Crispin
ca1fcaed5b ramips: port patches to linux-3.6
Signed-off-by: Daniel Golle <dgolle@allnet.de>

 create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch
 create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
 create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch
 create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch
 create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch
 create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch
 create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch
 create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch
 create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch
 create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch
 create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch
 create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch
 create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch

SVN-Revision: 34108
2012-11-07 20:25:34 +00:00
Gabor Juhos
a0dd47bbed ramips: enable USB power on the DIR-645
Closes #12422.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34082
2012-11-05 11:04:45 +00:00
Gabor Juhos
829aaedcbf ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 34078
2012-11-05 06:58:53 +00:00
Gabor Juhos
e91dc2e5b3 target: refresh all target configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33987
2012-10-29 10:11:05 +00:00
Gabor Juhos
db5eea6acd ramips: use correct key code for the RFKILL switch on the TEW-691GR
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33943
2012-10-26 18:53:44 +00:00
Gabor Juhos
b530d9d2b3 ramips: disable 5GHz on the built in wireless mac of the TEW-69{1,2}GR
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33864
2012-10-19 17:42:22 +00:00
Gabor Juhos
6ca2970e4b ramips: add profile and build image for the TEW-691GR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33852
2012-10-18 07:23:13 +00:00
Gabor Juhos
21180e29f7 ramips: add user-space support for TEW-691GR
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33851
2012-10-18 07:23:12 +00:00
Gabor Juhos
25d53c4c28 ramips: rt3883: add initial support for the TRENDnet TEW-691GR board
No wireless support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33850
2012-10-18 07:23:11 +00:00
Gabor Juhos
462a53c367 ramips: add profile and build image for the TEW-692GR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33849
2012-10-18 07:23:10 +00:00
Gabor Juhos
d3c368c324 ramips: add user-space support for the TEW-692GR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33847
2012-10-18 07:23:07 +00:00
Gabor Juhos
7f8b7207c9 ramips: rt3883: add initial support for TRENDnet TEW-692GR board
No wireless support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33846
2012-10-18 07:23:06 +00:00
Gabor Juhos
bf9ae9432b ramips: add profile and build image for the DIR-645 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33845
2012-10-18 07:23:04 +00:00
Gabor Juhos
06edafd079 ramips: add user space support for the DIR-645
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33844
2012-10-18 07:23:03 +00:00
Gabor Juhos
d1a253a2fd ramips: rt3883: add inital support for the DIR-645 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33843
2012-10-18 07:23:02 +00:00
Gabor Juhos
e962c16a88 ramips: use get_magic_long in sysupgrade image check
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33842
2012-10-18 07:23:00 +00:00
Gabor Juhos
d832cd11f8 ramips: add image for ALL0256N-8M
The new version of the ALL0256N now got 8MB SPI NOR flash instead of 4MB.
In order to expose the whole amount of flash, add another image which contains
the corresponding GENERIC_8M mtdparts.

[juhosg: change suffix from '8m' to '8M']

Patch by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33614
2012-10-04 06:34:09 +00:00
Gabor Juhos
e3bcbeb427 ramips: add memory detection code for RT5350
SVN-Revision: 33571
2012-09-27 10:18:15 +00:00
Gabor Juhos
80d2da9f0f ramips: allow to use custom code for memory size detection
SVN-Revision: 33570
2012-09-27 10:18:14 +00:00
John Crispin
d8c04821c3 make uci-defaults switch detection work on rt5350
SVN-Revision: 33549
2012-09-25 14:47:18 +00:00
John Crispin
34d57ebd8b add ethernet support for rt5350
SVN-Revision: 33548
2012-09-25 14:47:08 +00:00
John Crispin
af0cd76937 make ramips ethernet use a register mapping table
SVN-Revision: 33547
2012-09-25 14:46:58 +00:00
John Crispin
394a560a9a unbreak port mapping detection
SVN-Revision: 33536
2012-09-25 09:51:48 +00:00
John Crispin
223db72385 D-Link DAP-1350; Avoid bricking esw config
This is a patch to connect eth0.1 (lan) to the only
ethernet connector available.

D-Link DAP-1350 goes bricked with AA 12.09-beta.

This is because the current esw configuration for the
board connects eth0.2 (wan) to the *ONE and ONLY*
ethernet connector available, preventing initial access
to the board through 192.168.1.1 on eth0.1 after flashing,
effectively bricking the board.

There are things that should be done to make this board
really useful, but for AA 12.09, this one liner is
indispensable.

Signed of by Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 33411
2012-09-15 09:28:28 +00:00
John Crispin
bf355f8ee9 ramips/rt3883: fix a typo in the ASUS profile
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33410
2012-09-15 09:20:50 +00:00
Gabor Juhos
0a42b02126 ramips/rt305x: add initial support for Rt5350 SoC
Somehow detecting the RAM size in common/setup.c doesn't
work here, it always detects 64M and then crashes on devices
with less RAM.
Probably using MEMC_REG_SDRAM_CFG1 to know the RAM size is how
it could be, for now I use the mem=32M kernel parameter to get
stuff working.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33381
2012-09-12 19:03:12 +00:00
Gabor Juhos
d8b2fef763 ramips: Add missing andmask to ramips_esw register read for recv_good value.
Add missing andmask to ramips_esw register read for recv_good value.

Without the mask, recv_bad leaks into the recv_good packet count.
Didn't notice the bug before since you don't usually get bad
packets, so I only saw it when I was playing with overlength packets
earlier...

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33322
2012-09-05 20:08:43 +00:00
Gabor Juhos
04c6143ca9 ramips: Use doubletagging to disable ramips_esw vlan by default, it seems more reliable.
Use doubletagging to disable ramips_esw vlan by default, it seems
more reliable.

Daniel Golle found an issue where sometimes (possibly only for
RT3352) the default vlan disable method (clearing en_vlan, untag,
doubletag and putting all ports into vlan 0) doesn't work and the
packets get sent out vlan-tagged with vlan 0.

Instead switch to using the doubletagging method (allow doubletagged
packets, put all ports into vlan 0 with untag enabled) by default.

Unless someone figures out a way to really globally disable vlan for
this switch, this seems like the best (most reliable) option.

I did some tests regarding maximum packet size and did not see any

difference between the two methods, both allow for slightly bigger packets
than the ramips_main.c ethernet driver (ping stops going through
above "ping -s 1472" (1514 bytes), on the switch packets are recv_good until
"ping -s 1490", or about 1532 bytes).

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33321
2012-09-05 20:08:42 +00:00
Gabor Juhos
6c7b776ae0 ramips: add rssileds to package set in profile for devices which got them.
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33316
2012-09-05 19:22:48 +00:00
Gabor Juhos
b0da5b73b8 ramips: add kmod-usb-ohci to defaults packages in profile of ALL5002
SVN-Revision: 33307
2012-08-29 10:37:51 +00:00
Gabor Juhos
54d8a55eed ramips: make built-in switch transparent for ALL0256N and ALL5002
This allows them to transparently communicate with an external VLAN switch.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33305
2012-08-29 10:37:47 +00:00
Gabor Juhos
bc4763a399 ramips: Power down phy on disabled switch ports
Power down phy on disabled switch ports.

Haven't measured this myself yet, but according to this
http://www.8devices.com/community/viewtopic.php?f=6&t=156
it can save about 300mW of power.

[juhosg: fix checkpatch warning]

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33304
2012-08-29 10:37:45 +00:00
Gabor Juhos
1617f226a9 ramips: Add support for 8devices Carambola dev board.
Add support for 8devices Carambola dev board.

The Carambola is a small RT3050-based development board with two
ethernet ports, on-board chip antenna, usb and plenty of accessible
gpio ports, sold by 8devices.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33303
2012-08-29 10:37:43 +00:00
Gabor Juhos
bb0785880a ramips: Rename POC registers
Rename POC registers.

The current code uses POC1-POC3.

The datasheet uses:
POC1: Port Control 0
POC1: Port Control 1
POC2: Port Control 2

So the first POC1 is a typo that should have been POC0, rename the
registers to POC0-POC2 accordingly.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33302
2012-08-29 10:37:41 +00:00
Gabor Juhos
f1b9d77912 ramips: Minor ramips_esw.c cleanup
Stop handling VLAN setup in the kernel.
Removes the obsolete RT305X_ESW_VLAN_CONFIG_BYPASS option I added for
WL-351 and add some extra comments.
Also removes the en_vlan per-port flag that isn't very useful really, it now
is only controlled by the global enable_vlan flag.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33301
2012-08-29 10:37:40 +00:00
Gabor Juhos
1f3400d3b4 ramips: Add switch setup to uci network defaults
Add switch setup to uci network defaults.

The 'lan' attribute is used to decide into which vlan to put the
port.
Currently 'disable' is never set, but the intention is to use this
for devices like the 8devices Carambola, which only has two ports
hooked up to the SoC.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33300
2012-08-29 10:37:38 +00:00
Gabor Juhos
3b17f1deb8 ramips: Add swconfig support to ramips_esw.c
Add swconfig support to ramips_esw.c

This patch adds swconfig support for ramips_esw:

Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external
rtl8366rb on internal port 5).
I've made sure that in the enable_vlan=0 case it behaves like a dumb
switch, so external switches should work fine with vlans and
verified this on the WL-351.

The current state shown by swconfig is always read directly from HW
registers, new settings only show after 'swconfig dev rt305x set apply'.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33299
2012-08-29 10:37:36 +00:00
Gabor Juhos
358c7e47f2 ramips: ramips_esw.c indentation cleanup
Minor indentation cleanup.

Prepare for the main swconfig patch by cleaning up indentation a bit.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33298
2012-08-29 10:37:35 +00:00
Gabor Juhos
cebaa557be ramips: fix board parameter for the NBG-419N (#12061)
SVN-Revision: 33229
2012-08-22 17:55:12 +00:00
Gabor Juhos
eb54a05e89 ramips: add profile for Allnet devices
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33225
2012-08-22 12:36:35 +00:00
Gabor Juhos
d77418d67e ramips: add RSSI leds for uci-defaults for ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33220
2012-08-22 09:46:30 +00:00
Gabor Juhos
67e6461ad7 ramips: add board alias for the ALL0239-3G
Generate image for the ALL0239-3G which can be flashed through the
chipset-vendor SDK based firmware's web-interface and bootloader.

The bootloader seems to ignore uImage checksum errors, but does complain about
them once the 0xDEADC0DE was replaced by an actual JFFS2 page.

I'm working on implementing fixtrx for uImage in the mtd package to solve this.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33206
2012-08-17 17:56:07 +00:00
Gabor Juhos
89606b61b1 ramips: add support for D-Link DIR-615 H1
rt2x00 still needs some patching as the radio doesn't come to life.
Installation via webflash.

[juhosg: fix whitespace issues, remove rt305x_register_usb
from machine setup because the board has no USB port]

Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi>

SVN-Revision: 33205
2012-08-17 17:56:05 +00:00
Gabor Juhos
82759a1716 ramips: rename rt3352 usb platform devices
In order to get OHCI/EHCI working on the Rt3352, the platform device must be
named so rt3883-?hci will recognize it.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33145
2012-08-12 12:48:31 +00:00
Gabor Juhos
1525620b0e ramips: watchdog: use maximum possible timeout by default
As the userspace has no means to determine the maximum possible timeout, use
that as the default and let the userspace lower it when necessary.

As the result the usual OpenWrt install (with busybox's watchdog trying to set
the timeout to 60s on start) is using a 33s timeout on an RT3052 clocked at
384MHz instead of the current 20s default.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33144
2012-08-12 12:48:28 +00:00
Gabor Juhos
615a619bc7 ramips: provide means to specify custom "image name" for uImages, use for DIR-620
D-Link's DIR-620 allows to flash a uImage directly from its web-interface but
for that the image name should be set to DIR_620.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33143
2012-08-12 12:48:26 +00:00
Gabor Juhos
9365113040 ramips: add D-Link DIR-620 A1 support
Full functionality runtime tested, installation via OEM web-interface requires
a follow-up patch.

Thanks go to Sergey Vasilyugin for his patch that pointed me at the missing
bits (including the antiparallel wps led).

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33142
2012-08-12 12:48:24 +00:00
Florian Fainelli
1627b2bb4b move rt305x-dwc driver to target specific modules.mk
SVN-Revision: 32864
2012-07-25 15:50:42 +00:00
John Crispin
5e52619b76 DWC otg usb: compilation fixes and trivial bugfix in slave mode
Signed-of-by: Nikolai Zhubr <n-a-zhubr@yandex.ru>

SVN-Revision: 32823
2012-07-24 20:38:55 +00:00
John Crispin
799d6deab0 D-Link DAP-1350 initial support
The initial support for the D-Link DAP-1350.
USB related functionality is not tested.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32821
2012-07-24 20:38:43 +00:00
John Crispin
03be8d08ac initial LED configuration for Fonera 2.0n
Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips)

Signed-off-by: Malte Forkel <malte.forkel@berlin.de>

SVN-Revision: 32819
2012-07-24 20:38:31 +00:00
John Crispin
2d2479a033 add ALL5002 userspace support
detect EEPROM, MAC addresses and support sysupgrade for the ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32816
2012-07-24 20:38:14 +00:00
John Crispin
e219c3ac3a enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F.
Hope that this works, didn't have a chance to actually test it...

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32815
2012-07-24 20:38:08 +00:00
John Crispin
a65eee9ac3 add image build for ALL5002
add image build for ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32814
2012-07-24 20:38:03 +00:00
John Crispin
0a08a776fb add support for Allnet ALL5002 to kernel
support ALL5002 in ramips/rt305x branch of the kernel.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32813
2012-07-24 20:37:56 +00:00
John Crispin
6641024f50 uart_clk on Rt3352F is always 40MHz
Currently, sys_clk/10 is used which is just wrong.
cpu_clk/10 would work for systems with 400MHz CPU clock.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32812
2012-07-24 20:37:50 +00:00
Gabor Juhos
372945185d ramips: rt305x: add support for Edimax 3G-6200N
Support for Edimax 3G-6200N router with USB.

Signed-off-by: Lukasz Golebiowski <lgolebio@gmail.com>

SVN-Revision: 32682
2012-07-12 13:29:46 +00:00
Vasilis Tsiligiannis
eee358338c ramips: mac address detection for Fonera 2.0n
Detect and apply MAC address of a Fonera 2.0n (ramips)

Signed-off-by: Malte Forkel <malte.forkel@berlin.de>
Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>

SVN-Revision: 32490
2012-06-23 13:58:29 +00:00
Gabor Juhos
833b4af816 ramips: rt305x: add support for the Petatel PSR-680W Wireless CDMA Router
This patch adds support for the Korean made Petatel PSR-680W Wireless CDMA Router.
The platform is based on Ralink RT3052.
http://wiki.openwrt.org/toh/petatel/psr-680w

Signed-off-by: Dmitry Shmygov <shmygov at rambler.ru>

SVN-Revision: 32450
2012-06-19 09:52:15 +00:00
John Crispin
a4d96aae8d bump to 3.3.8
SVN-Revision: 32055
2012-06-05 06:57:51 +00:00
Gabor Juhos
ffbb4f88a9 ramips: use the generic uci-default functions for initial LED setup
SVN-Revision: 31993
2012-05-29 16:39:18 +00:00
Gabor Juhos
c71838faa1 ramips: WAN LED for D-Link DIR-300-B1
Add led devices for D-Link DIR-300-B1 WAN LED.

Note that the GPIO state is also ANDed with the esw switch port 4
LED state, which is why I've set the amber LED to default-on.

Closes: https://dev.openwrt.org/ticket/11326

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

[ juhosg:
- fix comment style in mach-dir-300-revb.c,
- remove the PPP specific LED setup, not everyone uses a PPP connection
  on the WAN interface]

SVN-Revision: 31989
2012-05-29 16:39:03 +00:00
Gabor Juhos
1c552ba8e5 ramips: rt3883: add device registration code for the SPI controller
SVN-Revision: 31922
2012-05-27 17:10:00 +00:00
Gabor Juhos
9c241983fc ramips: allow to use the SPI driver on RT3662/RT3883
SVN-Revision: 31921
2012-05-27 17:09:58 +00:00
Gabor Juhos
78a750dcce ramips: rt3883: fix GPIO reservation for the SPI pins
SVN-Revision: 31920
2012-05-27 17:09:56 +00:00
Gabor Juhos
0622fdd82c ramips: rt305x: remove superfluous controller_data assignment
SVN-Revision: 31919
2012-05-27 17:09:52 +00:00
Gabor Juhos
7f5bec0642 ramips: make rt2x00 firmware extraction quiet
SVN-Revision: 31918
2012-05-27 17:09:50 +00:00
Gabor Juhos
2ae5581447 kernel: update linux 3.3 to 3.3.7
SVN-Revision: 31848
2012-05-23 21:05:32 +00:00
Gabor Juhos
e4720dfa95 ramips: Add byte queue limits support to net/ethernet/ramips_main.c
Add byte queue limits support to net/ethernet/ramips_main.c

"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31844
2012-05-23 21:05:23 +00:00
Gabor Juhos
1d286fd755 ramips: Enable sysupgrade for Sitecom WL-351
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31843
2012-05-23 21:05:22 +00:00
Gabor Juhos
39994008cb linux: move certain disabled symbols to the generic configs
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
2012-05-15 10:58:52 +00:00
Gabor Juhos
b472e5d12e kernel: update linux 3.3 to 3.3.6
SVN-Revision: 31709
2012-05-14 09:18:32 +00:00
Gabor Juhos
34018a630f kernel: update linux 3.3 to 3.3.5
SVN-Revision: 31645
2012-05-07 20:11:43 +00:00
Gabor Juhos
b0449ccf04 ramips: W306R V2.0 - GPIO and Network fixes
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
       removing a line(default is correct), and reversed the
       Lan/wan layout LLLLW to WLLLL.

Added: image/Makefile now builds -factory.bin files. I am
       unsure of the accepted way to change the makefile but
       the name of the image needs to be 'linkn Kernel Image'
       in order to be accepted by the OEM firmware.

Known issue: eth0 (internal switch i think has mac address:
       00:11:22:33:44:55  but i think it should be same as
       the lan).
Known issue: Pressing the reset button has no noticable effect,
       i would expect the router to boot failsafe if being
       pressed on boot, reboot if short press and reset all
       to default if long press.

[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]

Signed-off-by: David Pearce <david_18051985@hotmail.com>

SVN-Revision: 31557
2012-05-02 19:17:59 +00:00
Gabor Juhos
90e99b9fe8 ramips: Make serial console for DIR-300-B1 work again
Make serial console for DIR-300-B1 work again.

With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.

Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31556
2012-05-02 19:17:58 +00:00
Gabor Juhos
cbfce53831 kernel: update linux 3.3 to 3.3.4
SVN-Revision: 31541
2012-04-30 08:38:11 +00:00
Gabor Juhos
8e06682fb7 ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

SVN-Revision: 31507
2012-04-29 07:36:33 +00:00
Jonas Gorski
8fd383ae2e kernel: update linux 3.3 to 3.3.3
SVN-Revision: 31460
2012-04-24 09:25:38 +00:00
Gabor Juhos
1ab80c7817 ramips: rt305x: add support for the UR-336UN board
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

SVN-Revision: 31451
2012-04-23 16:56:06 +00:00
Gabor Juhos
3626444c6d ramips: rt305x: add support for the Asus WL-330N3G board
This patch adds support for the ASUS WL-330N3G

Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led.

The bi-color led is driven by 2 gpio.
I don't know how to handle this, so I simply made 2 leds : one red, one blue.
But the red light takes precedence over the blue one according to the chart below.

r = led is red
b = led is blue
0 = led is off

xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness

initial state	action	 led	gpio state

r0	b0	r0->r1	 r  	r0	b0
r0	b0	b0->b1   b	r0	b1

r1	b0	r1->r0	 0	r0	b0
r1	b0	b0->b1	 r	r1	*b1*

r1	b1	r1->r0   b	r0	b1
r1	b1	b1->b0   r	r1	b0

r0	b1	r0->r1   r	r1	*b1*
r0	b1	b1->b0   0	r0	r0

Signed-off-by: Frédéric Leroy <fredo@starox.org>

SVN-Revision: 31450
2012-04-23 16:56:05 +00:00
Gabor Juhos
5024ffb976 ramips: nuke 3.2 suport
SVN-Revision: 31405
2012-04-21 12:30:53 +00:00
Gabor Juhos
6c8ca78067 ramips: switch to 3.3.2
SVN-Revision: 31404
2012-04-21 12:30:51 +00:00
Gabor Juhos
5c325b0057 ramips: add support for 3.3
SVN-Revision: 31403
2012-04-21 12:30:50 +00:00
Gabor Juhos
7f902c962b ramips: rt305x: add OHCI/EHCI registration code for RT3352
SVN-Revision: 31402
2012-04-21 12:30:48 +00:00
Gabor Juhos
1645928135 ramips: rt305x: fix CPU clock detection on RT3352
SVN-Revision: 31401
2012-04-21 12:30:47 +00:00
Gabor Juhos
fb69e28eaf ramips: rt305x: use different memory size setup for RT3352
SVN-Revision: 31400
2012-04-21 12:30:45 +00:00
Gabor Juhos
818aeba960 ramips: rt3883: add profile and build sysupgrade image for the RT-N56U
SVN-Revision: 31399
2012-04-21 12:30:44 +00:00
Gabor Juhos
6b677e1d22 ramips: add swconfig to the default package list
SVN-Revision: 31398
2012-04-21 12:30:43 +00:00
Gabor Juhos
ced031a0b2 ramips: build initramfs image for the Fonera 2.0N
SVN-Revision: 31397
2012-04-21 12:30:42 +00:00
Gabor Juhos
fc88a363c0 ramips: rt305x: add initial support for Tenda W306R V2.0
More device info at: http://wiki.openwrt.org/toh/tenda/w306r

Signed-off-by: David Pearce <David_18051985@hotmail.com.au>
[juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages
from the profile, change broken GPIO number]

SVN-Revision: 31396
2012-04-21 12:30:40 +00:00
Gabor Juhos
88b5827c52 ramips: remove hardcoded console parameter from kernel configs
SVN-Revision: 31395
2012-04-21 12:30:30 +00:00
Jonas Gorski
a8f2bc682e kernel: also update the targets to use 3.2.15
Thanks Gabor for spotting it.

SVN-Revision: 31337
2012-04-17 13:12:14 +00:00
Jonas Gorski
16b4cbcdd6 kernel: update linux 3.2 to 3.2.14
SVN-Revision: 31222
2012-04-09 14:48:51 +00:00
Jonas Gorski
d87efd8c3c kernel: update linux 3.2 to 3.2.13 and refresh patches
Also remove a duplicate patch from lantiq (already in generic).

SVN-Revision: 31158
2012-04-01 07:56:55 +00:00
Jo-Philipp Wich
e9c4d3d1f2 ramips: add support for the ARC FreeStation5 board, also fix WCR-150GN network setup while we're at it - thanks Pau Escrich <p4u@dabax.net> for the implementation
SVN-Revision: 31144
2012-03-29 16:03:04 +00:00
Gabor Juhos
d495277d9f ramips: rt305x: build image for the DIR-615 rev D boards
Patch from #10105.

SVN-Revision: 31101
2012-03-27 19:29:59 +00:00
Gabor Juhos
e4e24c5512 ramips: rt305x: add add support for the Asus WL-330N board
[juhosg: reorder several lines in order to keep things sorted
alphabetically]

Signed-off-by: Frédéric Leroy <fredo@starox.org>

SVN-Revision: 31100
2012-03-27 19:29:57 +00:00
Gabor Juhos
c1dc6df8bd kernel: update linux 3.2 to 3.2.12
SVN-Revision: 31028
2012-03-19 18:23:31 +00:00
Gabor Juhos
18f7081e17 ramips: rt305x: add profile for the AZtech HW-5503G board
Patch from #11085.

SVN-Revision: 30907
2012-03-12 17:29:06 +00:00