Commit graph

290 commits

Author SHA1 Message Date
Hans Geiblinger
a43c503ec4 mvebu: set fan_ctrl.sh only on mamba
Signed-off-by: Hans Geiblinger <cybrnook2002yahoo.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
2017-01-24 16:21:25 +01:00
Felix Fietkau
366c33962c uboot-mvebu: switch to u-boot.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:24 +01:00
Paul Wassi
9641ceea0c mvebu: simplify etc/board.d/02_network
Unify switch configuration on Linksys WRTxx00AC series.
LAN = eth0, WAN = eth1

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
[Álvaro]: also change WAN LEDs
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-01-13 17:12:40 +01:00
Álvaro Fernández Rojas
89ecfa7556 mvebu: several fixes for Linksys WRT3200ACM
- Fix WLAN LEDs definition.
- Fix USB pinctrl definition.
- Remove SDHCI definition.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-01-13 17:12:40 +01:00
Felix Fietkau
6f57e32f95 mvebu: remove the clearfog-bundle
It is obsoleted by proper SD card image support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 16:59:28 +01:00
Felix Fietkau
2e1f6f1682 mvebu: work around an ethernet tx scheduling fairness issue
The hardware queue scheduling is apparently configured with fixed
priorities, which creates a nasty fairness issue where traffic from one
CPU can starve traffic from all other CPUs.

Work around this issue by forcing all tx packets to go through one CPU,
until this issue is fixed properly.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 14:56:57 +01:00
Kabuli Chana
fe876e9ac6 mvebu: Fix up some leds on this series
correct ports, fix power led on rango, tested mamba,shelby,rango

Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
2017-01-10 12:28:32 +01:00
Felix Fietkau
018d80007e kernel: remove ubifs xz decompression support
It has been unused, and less useful than squashfs for cases where flash
space usage matters.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-09 14:07:06 +01:00
Vignesh Balasubramaniam
62e4c915ee mvebu: fix sysupgrade for Linksys WRT3200ACM
sysupgrade command fails due to missing U-Boot environment-processing
binaries on sysupgrade ramdisk. The missing binaries result in the
following output:

Switching to ramdisk...
	Performing system upgrade...
	ash: /usr/sbin/fw_printenv: not found
	ash: fw_setenv: not found
	ash: touch: not found
	cannot find target partition

Signed-off-by: Vignesh Balasubramaniam <vigneshb.hp@gmail.com>
2016-12-04 07:03:17 +01:00
Mathias Kresin
c95e4e715d mvebu: fix image validation error
The name from the Device define will be used in the metadata. Due to
typo/different spelling, this name might not match the one exported in
/lib/mvebu.sh.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-04 07:03:17 +01:00
Mathias Kresin
7cc0d8b3bd mvebu: fix typo in image metadata support
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-27 15:34:22 +01:00
Felix Fietkau
95e7868e7e Revert "mvebu: simplify etc/board.d/02_network"
This reverts commit 539ae47103.
According to reports, this introduces a regression on WRT3200ACM

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-25 20:03:45 +01:00
Paul Wassi
539ae47103 mvebu: simplify etc/board.d/02_network
Unify switch configuration on Linksys WRTxx00AC series.
LAN = eth0, WAN = eth1

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2016-11-24 12:53:17 +01:00
Felix Fietkau
9fc0bcdd18 mvebu: use image metadata for firmware validation
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-24 12:53:17 +01:00
Toke Høiland-Jørgensen
8aa9f6bd71 mvebu: Add BQL patch for mvneta driver.
This adds the patch submitted to upstream that adds BQL to the mvneta
driver: https://patchwork.kernel.org/patch/9328413/. Helps latency under
load when the physical link is saturated.

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
2016-11-21 11:24:12 +01:00
Mathias Kresin
5640986001 mvebu: revert remove of mvsw61xx device tree nodes
The marvell,88e6352 and marvell,88e6172 compatible strings are used in
target/linux/generic/files/drivers/net/phy/mvsw61xx.c. No idea why grep
missed them when I searched for them.

Thanks to Syrone Wong for noticing and reporting my mistake.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-13 09:03:52 +01:00
Mathias Kresin
de40d45363 treewide: dts: fix dtc compiler warnings
Fixes invalid device tree parameters.

Drop the mvsw61xx node used in mvebu device tree source files. It looks
like some kind of ethernet switch cargo cult. Neither the
marvell,88e6352 nor the marvell,88e6172 compatible strings can be found
in any LEDE file or in the kernel sources.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-12 21:04:15 +01:00
Stijn Segers
2f2ea7b44c kernel: update kernel 4.4 to version 4.4.30
This patch bumps the 4.4 kernel from .28 to .30 and refreshes the patches.
Compile-tested on ar71xx, x86/64, ramips/mt7621, brcm47xx and kirkwood.

Run-tested on ar71xx & ramips/mt7621, brcm47xx and kirkwood (last two confirmed
by P. Wassi).

Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
2016-11-02 10:25:44 +01:00
Imre Kaloz
3764caa934 mvebu: add support for the Linksys WRT3200ACM (Rango)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-10-24 08:45:06 +02:00
Imre Kaloz
2beab73fad mvebu: add missing status LEDs for Linksys WRT1200AC and WRT1900ACv2
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
2016-10-24 08:45:06 +02:00
Rafał Miłecki
0658527e1e switch to the new usbport LED trigger
This makes init.d script handle existing UCI entries using the new
trigger. It also switches all targets to use its package.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-19 12:09:45 +02:00
Aaron Curley
15cb19f02a mvebu: fix sysupgrade
sysupgrade command fails due to missing U-Boot environment-processing binaries on sysupgrade ramdisk. The missing binaries result in the following output:
	Switching to ramdisk...
	Performing system upgrade...
	ash: /usr/sbin/fw_printenv: not found
	ash: fw_setenv: not found
	ash: touch: not found
	cannot find target partition

Fixes FS#197.

Signed-off-by: Aaron Curley <accwebs@gmail.com>
2016-10-04 11:50:48 +02:00
Álvaro Fernández Rojas
7d559169c5 kernel: update to v4.4.23
Refresh patches for all targets that support kernel 4.4.
compile/run-tested on brcm2708/bcm2710 only.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-30 20:08:21 +02:00
Jonas Gorski
4aa5d3e60d mvebu: add support for SFP
Add patches for SFP support and package it for ClearFog. Tested with a
Juniper SFP module.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
2016-09-29 13:47:18 +02:00
Jonas Gorski
a454756c91 mvebu: disable MSI interrupts
MSI interrupts do not seem to be working on mvebu, and they break
ath10k. Since nothing else seems to be using them, especially not
mwlwifi, disable them until we can fix MSI interrupts.

Works around the following issue:
[    9.001457] ath10k_pci 0000:02:00.0: failed to receive control response completion, polling..
[   10.001453] ath10k_pci 0000:02:00.0: Service connect timeout
[   10.007126] ath10k_pci 0000:02:00.0: failed to connect htt (-110)
[   10.092224] ath10k_pci 0000:02:00.0: could not init core (-110)
[   10.098177] ath10k_pci 0000:02:00.0: could not probe fw (-110)

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
2016-09-29 13:47:18 +02:00
Jonas Gorski
27ed4e9c14 mvebu: add switch config for clearfog pro
Check for switch0 existance and add default switch config if found.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-09-26 13:27:44 +02:00
Jonas Gorski
6859098d97 mvebu: add sysupgrade support for clearfog
Add and enable sysupgrade support for clearfog boards, based on how the
brcm2708 target does it.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
2016-09-26 13:04:53 +02:00
Jonas Gorski
c359d7e81b mvebu: add switch node to clearfog
Add a switch node to clearfog to probe and initialize it on Clearfog
Pro. This make the switch work and allows using all six switch ports.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
2016-09-26 13:04:47 +02:00
Jonas Gorski
f2102b484b mvebu: replace ClearFog dts files with patches from upstream
Make the dts file match with what is upstream, to ensure it has the
latest changes and switching to newer kernels is easier.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
2016-09-26 13:03:51 +02:00
Jonas Gorski
c4f4d65835 mvebu: enable PCA955x driver for clearfog to enable pcie and usb
Some of the PCIe and USB signals use a GPIO expander on I2C on ClearFog,
so enable the driver so that they can be configured to their required
values.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
2016-09-26 13:03:45 +02:00
Jonas Gorski
d8075b15d0 uboot-mvebu: make hidden and be m for clearfog to fix IB failing to add it
Uboot-mvebu isn't a real package, which will break the image builder
when it tries to install it during the packing step. Instead of cleafog
selecting it through its default packages, make it default to m if the
clearfog profile is selected.

This will ensure it is always build, but never added to the rootfs. This
fixes creating images for clearfog with IB.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
2016-09-26 12:48:18 +02:00
Jonas Gorski
bc1f006b4e uboot-mvebu: also install into KDIR to ensure it packaged in IB
The clearfog image requires u-boot, so package it into KDIR to make sure
it is available in imageBuilder.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
2016-09-26 12:47:36 +02:00
Álvaro Fernández Rojas
d14c28fc80 kernel: update kernel 4.4 to version 4.4.20
Refresh patches for all targets that support kernel 4.4.
Compile-tested on brcm2708 only.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-15 08:10:55 +02:00
Mathias Kresin
61c2a7339a image: remove padding parameter from append-kernel/append-rootfs
Using pad-to instead of passing the optional padding to append-kernel
or append-rootfs. It could be that the value of a variable is passed.
In case the variable is empty no error is thrown.

Furthermore the purpose of the extra parameter is hard to get without
reading the code.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-13 19:36:41 +02:00
Mathias Kresin
1cd0a4c688 image: add KERNEL_SIZE to the default device vars
This reverts commit ec37a56587 and fixes
the underlying issue.
2016-09-13 19:36:41 +02:00
Felix Fietkau
d27bce8d28 build: drop UBI EOF marker from images by default
Only add them where they are actually required.
Should help with compatibility issues with stock U-Boot images that
access UBI

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-12 18:21:52 +02:00
Mathias Kresin
306f1c7846 mvebu: fix OpenBlocks AX3 image
The KERNEL_SIZE variable is unset and no padding is applied. This looks
like a typo to me since the ubinized image need to be aligned to the
flash blocksize.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-11 19:40:45 +02:00
Felix Fietkau
3cbb7820a4 mvebu: use ext4/f2fs overlay filesystem for solidrun clearfog
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-10 12:17:39 +02:00
Felix Fietkau
bee30de984 mvebu: enable ext4, f2fs and loop device support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-10 12:17:39 +02:00
Mathias Kresin
e7ec7a08aa image: use k as unit suffix for blocksize
Use k as unit suffix for kilobyte to have a the same unit regardless of
the used filesystem.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-04 08:56:05 +02:00
Felix Fietkau
2d7d9baf19 mvebu: use ptgen instead of fdisk to make the clearfog image script more portable
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-02 14:43:53 +02:00
Josua Mayer
3242c07649 mvebu: add sdcard image creation script
Added gen_mvebu_sdcard_img.sh to facilitate creating an fixed-size sdcard image,
adding the bootloader and populating it with actual data.

Added the required rules for creating a 4GB sdcard image according to this layout:
p0: boot (fat32)
p1: rootfs (squashfs)
p2: rootfs_data (ext4)
This should be generic to any mvebu boards that can boot from block storage.

Added the new sdcard image to the Clearfog image profile.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
2016-09-02 14:43:52 +02:00
Josua Mayer
a67183a7bc mvebu: clearfog: require uboot-mvebu-clearfog
The u-boot variant for the clearfog is provided by the uboot-mvebu-clearfog,
and not by the generic uboot-mvebu packae.
Make sure the clearfog variant is selected when building for it.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-02 14:43:52 +02:00
Josua Mayer
fa0c45c397 mvebu: add fpu to features
This triggers HAS_FPU=y, and unsets CONFIG_SOFT_FLOAT.
Considering all mvebu boards have an fpu, this is the desirable behaviour.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-30 10:51:21 +02:00
Felix Fietkau
86e27f135b mvebu: enable ARM crypto acceleration
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-30 10:51:20 +02:00
Felix Fietkau
c419ae2da8 mvebu: enable NEON support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-30 10:51:20 +02:00
Josua Mayer
ef02a7154d mvebu: make MMC driver for Clearfog builtin
microSD is the primary boot media for the Clearfog Pro board, and should
work unconditionally.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
2016-08-30 10:51:20 +02:00
Felix Fietkau
6f1ce6560d mvebu: refresh kernel config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-30 10:51:20 +02:00
Stijn Tintel
8072264b96 kernel: update kernel 4.4 to version 4.4.19
Refresh patches for all targets that support kernel 4.4.
Compile-tested on all targets that use kernel 4.4 and aren't marked broken.
Runtime-tested on ar71xx, octeon and x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2016-08-23 10:51:17 +03:00
John Crispin
18eebfe4e5 mvebu: fix boot stalls on WRT1900AC V1
Signed-off-by: John Crispin <john@phrozen.org>
2016-08-18 09:49:18 +02:00