Commit graph

2520 commits

Author SHA1 Message Date
Jo-Philipp Wich
f9aa2ec7f6 ar71xx: fix 82_patch_ath10k
The firware md5sum check never worked due to missing dollar signs.

Also suppress
  `md5sum: can't open '/lib/firmware/ath10k/QCA988X/hw2.0/firmware-3.bin'`
error on any board not using ath10k.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44486
2015-02-17 21:26:39 +00:00
John Crispin
a54f062bd4 ar71xx: make v3.18 default
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44482
2015-02-17 14:33:29 +00:00
John Crispin
4e5c2b6f46 ar71xx: fix mv88e6063 compile for 3.14
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44459
2015-02-15 21:15:42 +00:00
John Crispin
1e5aa68071 ar71xx: fix a compile bug in 902-unaligned_access_hacks.patch
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44458
2015-02-15 21:15:21 +00:00
John Crispin
7e4b3de249 ar71xx: add v3.18 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44456
2015-02-15 19:45:29 +00:00
John Crispin
503a1aaaf6 ar71xx: ZyXEL NBG6716 rfkill switch fix
ZyXEL NBG6716 "rfkill" is a switch, not a button.

Signed-off-by: Marcin Mikolajczak <gr4ffy at gmail.com>

SVN-Revision: 44453
2015-02-14 20:48:42 +00:00
John Crispin
45c912ba13 ar71xx: Add profile and build image for TP-Link MR12U v1
This patch adds corrected profile and build image for the TL-MR12U board.

Unfortunately i cannot test the factory image since i can't find anywhere
the original chinese firmware but
the generated openwrt-ar71xx-generic-tl-mr12u-v1-squashfs-sysupgrade.bin
worked just fine over a modified mr3040 factory image i managed to modify
to initially flash the mr12u from the original firmware.

Proper kernel support probably should be added since cat /proc/cpuinfo shows
MR13U.

Signed-off-by: Daniel Petre <daniel.petre@gmail.com>

SVN-Revision: 44427
2015-02-13 07:29:10 +00:00
John Crispin
bd5635770c ar71xx: Add user-space support for TP-Link MR12U v1
This patch adds user-space support for the TL-MR12U board based on the mr13u patches.

Signed-off-by: Daniel Petre <daniel.petre@gmail.com>

SVN-Revision: 44426
2015-02-13 07:29:03 +00:00
John Crispin
235a83cdfe ar71xx: ZyXEL NBG6716 add gpio usb power on/off
ZyXEL NBG6716 add missing GPIO USB power on/off

Signed-off-by: Marcin Mikolajczak <gr4ffy at gmail.com>

SVN-Revision: 44425
2015-02-13 07:28:53 +00:00
John Crispin
de8d6e447c ar71xx: ZyXEL NBG6716 led/buttons cleanup
ZyXEL NBG6716 led/buttons cleanup
 - improper numbered leds
 - improper named buttons

Signed-off-by: Marcin Mikolajczak <gr4ffy at gmail.com>

SVN-Revision: 44417
2015-02-12 08:07:27 +00:00
John Crispin
a2fcaa77fc ar71xx: add mc-mac1200r to do_load_ath10k_board_bin()
This patch adds the mc-mac1200r target to do_load_ath10k_board_bin() in
target/linux/ar71xx/base-files/lib/preinit/81_load_ath10k_board_bin to load the
ath10k radio MAC address from the EEPROM in MERCURY MAC1200R devices

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 44375
2015-02-10 05:52:53 +00:00
John Crispin
b523db36a0 ar71xx: dir-505: fix reset button gpio active_low value
Fix 'active_low' default value for the reset button on DIR-505.

Signed-off-by: Rocco Folino <rocco@devzen.net>

SVN-Revision: 44360
2015-02-09 12:17:00 +00:00
John Crispin
a5b60de253 ar71xx: Add support for MERCURY MAC1200R
This patch adds support for MERCURY MAC1200R, a dual band 802.11bgn + 802.11ac
router based on the AR9344, with QCA988x ath10k radio and 5 Fast Ethernet ports

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 44359
2015-02-09 12:16:51 +00:00
John Crispin
35d38f21e0 ar71xx: fix nbg6716 power and usb led
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Marcin Mikolajczak <gr4ffy@gmail.com>

SVN-Revision: 44358
2015-02-09 12:16:43 +00:00
Luka Perkov
efc28a75fe ar71xx: ubnt: move new board patches into one
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44315
2015-02-07 21:11:06 +00:00
Luka Perkov
0067ab8e39 ar71xx: rb2011: apply patch to file
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44314
2015-02-07 21:10:51 +00:00
Luka Perkov
fcfbbfc385 ar71xx: merge board specific patches into one
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44309
2015-02-07 20:53:16 +00:00
Luka Perkov
54ac4e0600 ar71xx: uci-defaults: add el-mini to appropriate group
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44307
2015-02-07 19:59:05 +00:00
Luka Perkov
8ca6c1acd4 ar71xx: qihoo: define flash variable as static
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44306
2015-02-07 19:59:02 +00:00
Luka Perkov
81db848656 targets: base-files: diag.sh does not need to be executable
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44305
2015-02-07 19:58:58 +00:00
Luka Perkov
92e6e80080 targets: files in uci-defaults do not need to be executables
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44304
2015-02-07 19:58:52 +00:00
Luka Perkov
0bbcdb21da ar71xx: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44303
2015-02-07 17:48:39 +00:00
John Crispin
cde2225c7c ar71xx: add support for the TP-LINK TL-WR941ND v5
This device is very similar to the TL-WR841N v8, only two LED GPIOs are
different.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 44255
2015-02-04 06:10:20 +00:00
John Crispin
a63e94426d at71xx: TP-LINK Archer: add 5GHz led entry
Add 5GHz led entry after r44033.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 44254
2015-02-04 06:10:12 +00:00
John Crispin
baaef42952 ar71xx: Revert "added board support for compex wpj558"
This reverts commit f7873071561d82e75ba2dc46433a2982fef8ac6f.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44245
2015-02-02 10:32:04 +00:00
John Crispin
bc906ca59e added board support for compex wpj558
Signed-off-by: Christian Mehlis <christian@m3hlis.de>

SVN-Revision: 44237
2015-02-02 09:00:21 +00:00
John Crispin
31fd66f808 ar71xx: add Netgear WNR1000v2/WNR1000v2-VC support (#18633)
The board is already supported by OpenWrt. WNR1000v2/WNR1000v2-VC are
pretty much the same as WNR2000v3/WNR612v2, therefore the same
initialization code and flash layout is used.

Signed-off-by: Ștefan Rusu <saltwaterc@gmail.com>
Tested-by: Douglas Fraser <1dsfraser@gmail.com>

SVN-Revision: 44221
2015-01-30 08:06:40 +00:00
John Crispin
259244624b ar71xx: fix D-Link DIR-615 rev. C1 WLAN MAC address
Fix the WLAN MAC address to match the one printed on the label by using the
correct address from the ART instead of the address of the LAN interface.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 44183
2015-01-28 19:19:47 +00:00
John Crispin
09a227a191 ar71xx: add default LED configuration for D-Link DIR-615 rev. C1
This patch adds an entry in the uci-defaults' led-file to configure the
WAN and WLAN LEDs by default.

Signed-off-by: Vincent Wiemann <me@bibbl.com>

SVN-Revision: 44165
2015-01-28 12:06:13 +00:00
John Crispin
df2e312100 ar71xx: add support for TP-LINK TL-WR843ND v1
TP-LINK TL-WR843ND v1 is the same model like wr41, but with
Power over Ethernet on wan port.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 44085
2015-01-23 12:32:46 +00:00
John Crispin
ae70358b1b ar71xx: add support for the UniFi AP Outdoor Plus
the GPIO controlling the rf filter is not configured properly by this patch.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 44077
2015-01-22 09:35:46 +00:00
John Crispin
4961c7d0f5 ar71xx: add support for TL-WA701ND v2
Signed-off-by: Luigi Tarenga <luigi.tarenga@gmail.com>

SVN-Revision: 44063
2015-01-20 15:48:07 +00:00
John Crispin
b5f9e5e454 ar71xx: fix board detection for TP-LINK TL-WA860RE
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 43983
2015-01-17 07:06:45 +00:00
Felix Fietkau
f1c5232f4d ar71xx: fix disable_irq() on chained irq handlers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43974
2015-01-15 12:19:20 +00:00
Felix Fietkau
547ab2de5a ar71xx: fix console string in images
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43917
2015-01-10 18:48:14 +00:00
Felix Fietkau
9229b34d92 ar71xx: port wndr3700/3800 to the new image building code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43910
2015-01-10 15:27:07 +00:00
Felix Fietkau
492bcad8ec ar71xx: port carambola2 to the new image building code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43909
2015-01-10 15:27:00 +00:00
Felix Fietkau
fa3cb9fa5c ar71xx: add flush reset register writes, should fix restart issues (#17839)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43777
2014-12-26 12:36:38 +00:00
Felix Fietkau
d7320d2d89 ar71xx: rename/refresh patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43775
2014-12-26 12:36:22 +00:00
Felix Fietkau
4571fc780d ar71xx: add support for qca956x soc
This patch adds soc support for QCA9561 and TP9343.
TP9343 is a reduced version of QCA9561, which can be found in TP-LINK routers in China.
The qca956x_wmac has not yet been supported by ath9k.

tested on TL-WDR6500 and TL-WR882N v1 (Chinese version)

Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 43744
2014-12-18 11:28:53 +00:00
Imre Kaloz
211cac98d5 Belkin AC 1750 DB (F9K1115v2) support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43734
2014-12-17 08:27:38 +00:00
John Crispin
019ea725aa add "preinit_regular" diag.sh set_state argument
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
John Crispin
a28d07abbe ar71xx: add an extra check on board_name for ath10k firmware patchs
It moves firmware patch code behind an extra check on board_name.
Otherwise it will calculate firmware checksum for unaffected boards.
It also reduce boottime by a md5 calculation and removes error message
on boot if firmware not found.

SVN-Revision: 43679
2014-12-13 08:06:01 +00:00
Felix Fietkau
8c6f1412b1 ar71xx: improve ethernet driver cache footprint by removing an unnecessary pointer
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43588
2014-12-09 12:28:46 +00:00
Felix Fietkau
db04bbd2ec ar71xx: remove another leftover broken chunk of code in the unaligned access hacks patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43586
2014-12-09 09:38:33 +00:00
Felix Fietkau
9a495f6bbb kernel: refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43564
2014-12-08 12:04:25 +00:00
Felix Fietkau
6327386aff ar71xx: fix invalid pointer accesses caused by unaligned access hacks (#18455)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43560
2014-12-08 10:48:28 +00:00
John Crispin
3572657c5a ar71xx: dev-eth: replace mdelay calls
Similar to patch 2. Replace further mdelay calls.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43540
2014-12-07 16:53:15 +00:00
John Crispin
59e7999a44 ag71xx: replace delay with sleep calls
I don't see that we're in an atomic context so there's no need to
busy-wait. Therefore replace the delay with sleep calls.
See also Documentation/timers/timers-howto.txt. It states:
"In general, use of mdelay is discouraged and code should
be refactored to allow for the use of msleep."

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43539
2014-12-07 16:53:09 +00:00
John Crispin
4caa8d50ad ag71xx: replace fixed PHY reset wait time in ar7240sw_setup
Replace the fixed wait time of 1s with polling for BMCR_RESET
to be cleared on all PHYs.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43538
2014-12-07 16:52:58 +00:00