KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
16274 commits 3 branches 0 tags 154 MiB
Commit graph

382 commits

Author SHA1 Message Date
Daniel Dickinson
3baa168e09 patches: Refreshed patches after led_count 
SVN-Revision: 24304
 2010-12-07 15:15:51 +00:00
Daniel Dickinson
b963cbde33 board definitions: Added patch for calculating led count, which was part of the patch removed in the previous commit 
SVN-Revision: 24303
 2010-12-07 15:15:47 +00:00
Daniel Dickinson
e5ca4d81f4 Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs. 
SVN-Revision: 24302
 2010-12-07 15:15:41 +00:00
Daniel Dickinson
ad24e14b35 base-files: Added the preinit information for reset button and preinit indication led, and preinit interface 
SVN-Revision: 24276
 2010-12-06 06:46:03 +00:00
Daniel Dickinson
244db5ac6a board definition: Fixed CPVA642 LED definitions 
SVN-Revision: 24275
 2010-12-06 06:45:57 +00:00
Daniel Dickinson
8316194016 board definitions: Added CPVA642 GPIO leds and buttons and refreshed patches later in series due to fuzz 
SVN-Revision: 24274
 2010-12-06 04:31:23 +00:00
Daniel Dickinson
7129521696 base-files: Added network defconfig because board only has one ethernet (4-port switch) 
SVN-Revision: 24273
 2010-12-06 02:01:08 +00:00
Daniel Dickinson
9677b65cb6 image Makefile: Corrected router imagename length limiting. Thanks KanjiMonster for reminding me. 
SVN-Revision: 24191
 2010-11-28 22:13:00 +00:00
Daniel Dickinson
314bce63e6 bcm63xx: Add support for the T-Com Speedport W 500V. 
Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies itself as a 96348GW, but has some gpios wired differently, and also
has only one ethernet port without a switch attached to it.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24190
 2010-11-28 22:04:44 +00:00
Daniel Dickinson
3a49f669f2 bcm63xx: Add board id override fixup. 
Add a fixup for the kernel to check the bcm tag of the image for a boardid in
the information1 field, and use that instead of the supplied one by cfe. This
is triggered by a + at the start of the information1 field.

Also modify the image generation to generate apropriately tagged images.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24189
 2010-11-28 22:04:40 +00:00
Daniel Dickinson
c51d772e62 bcm63xx: Finalize support for DSL-274xB, rev C2. 
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition,
resulting in a kernel panic on boot.
This patch adds it, and also renames the generated image name to properly
reflect that it is for the revision C2, and for both the DSL-2740B and
DSL-2741B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24188
 2010-11-28 22:04:36 +00:00
Daniel Dickinson
8fa9b24a4c bcm63xx: Allow 'colored' power leds. 
Since some devices have more than one power led, they might be separated by
their color in the name. To also allow them to be on after leaving preinit,
set any status led starting with 'power' to on instead of only those with
the exact name of 'power'.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24187
 2010-11-28 22:04:30 +00:00
Daniel Dickinson
fec30c8c80 bcm63xx: Don't hardcode the switch ethernet interface in preinit. 
Currently eth1 is hardcoded as the expected interface switches in diagmode.
This patch replaces the eth1 with the ifname, and also directly tests if
the interface specified by ifname has a switch attached.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24186
 2010-11-28 22:04:26 +00:00
Daniel Dickinson
b1b318750a bcm63xx: Add defconfigs. 
Port the mechanism for different default configurations from ar71xx and
use the old configuration as the default configuration. This should have
no functional differences to before.
While we are at it, remove the obsolete nat option.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24185
 2010-11-28 22:04:19 +00:00
Imre Kaloz
ead8ab8403 update to the latest stable kernels 
SVN-Revision: 24136
 2010-11-24 18:50:11 +00:00
Daniel Dickinson
195d1d7446 image Makefile: Removed extraneous tab from Image/LimitName16 macro definition. The solves the strange whitespace in front of the image name in the info1 section 
SVN-Revision: 24127
 2010-11-24 11:06:13 +00:00
Daniel Dickinson
0c0c1f017f image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used. 
SVN-Revision: 24118
 2010-11-23 20:17:08 +00:00
Daniel Dickinson
049e59a27b Initial support for Telsey CPVA642 boards (no vlans, no DSL, GPIO led/buttons not known). 
SVN-Revision: 24040
 2010-11-19 13:41:54 +00:00
Daniel Dickinson
eadb5c84fa imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). 
SVN-Revision: 24011
 2010-11-16 06:46:53 +00:00
Claudio Mignanti
7583fe8668 Add wps button on alice gate 
SVN-Revision: 23903
 2010-11-06 21:08:44 +00:00
Imre Kaloz
0a5da348d1 update kernels to 2.6.32.25 and 2.6.35.8 
SVN-Revision: 23851
 2010-11-04 09:01:08 +00:00
Florian Fainelli
ffc84cf75c register uart driver on livebox (#8013) 
SVN-Revision: 23653
 2010-10-27 10:02:13 +00:00
Florian Fainelli
7bf5647070 refresh 2.6.35 patches 
SVN-Revision: 23652
 2010-10-27 10:02:08 +00:00
Claudio Mignanti
697d3e7066 Fix nxp_74hc164 driver compile error (builbot) 
SVN-Revision: 23623
 2010-10-24 16:10:41 +00:00
Florian Fainelli
20d28f7685 fix platform_devices registration 
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com>

SVN-Revision: 23517
 2010-10-18 19:49:54 +00:00
Florian Fainelli
af0e5167bc add bcm96338W2 e7t board (D-Link 2640U/BRU/C, #7558) 
SVN-Revision: 23508
 2010-10-17 17:45:50 +00:00
Florian Fainelli
9d9e3fed62 remove 2.6.32 support 
SVN-Revision: 23505
 2010-10-17 16:32:35 +00:00
Florian Fainelli
a1ea84dbb6 fix SPI driver, move register out of driver code 
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com

SVN-Revision: 23504
 2010-10-17 14:09:30 +00:00
Florian Fainelli
1a13c39f76 restore kernel oldconfig 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23503
 2010-10-17 14:09:24 +00:00
Florian Fainelli
265bf2ccb0 refresh patches 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23502
 2010-10-17 14:09:04 +00:00
Florian Fainelli
9f4c51acb7 refresh nb4 support. Register 74x164 device 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23501
 2010-10-17 14:08:57 +00:00
Florian Fainelli
8cbd9d5a2e add spi devices board info int bcm63xx_boards 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23500
 2010-10-17 14:08:51 +00:00
Florian Fainelli
b65e494976 add 74x164 SPI chip support 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23499
 2010-10-17 14:08:45 +00:00
Florian Fainelli
cd9b90235c backport SPI master with no RXTX support (from 2.6.36) 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23498
 2010-10-17 14:08:39 +00:00
Florian Fainelli
d5854cfd4d register earlier extended platform devices 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23497
 2010-10-17 14:08:34 +00:00
Lars-Peter Clausen
83d6a36019 update 2.6.35.x to 2.6.35.7 
SVN-Revision: 23213
 2010-10-04 07:42:32 +00:00
Florian Fainelli
bbca651e1b remove wpa-supplicant and iw from the Tecom GW6x00 profile 
SVN-Revision: 23051
 2010-09-13 08:30:35 +00:00
Florian Fainelli
d3e206ad96 default to using 2.6.35 
SVN-Revision: 23038
 2010-09-12 21:23:53 +00:00
Florian Fainelli
dc1302fdf9 remove 2.6.33 support 
SVN-Revision: 23037
 2010-09-12 21:23:47 +00:00
Florian Fainelli
327ac42dca change the Tecom GW6x00 profile to use wl instead of b43 
SVN-Revision: 23036
 2010-09-12 21:23:41 +00:00
Florian Fainelli
f4f789f211 register udc and spi devices at the correct init level 
SVN-Revision: 23035
 2010-09-12 21:23:35 +00:00
Florian Fainelli
fab2e77357 refresh 2.6.35 patches 
SVN-Revision: 23034
 2010-09-12 21:23:29 +00:00
Jo-Philipp Wich
867ac59ff9 enable SYSRQ for all targets, remove overrides from brcm63xx, octeon and omap35xx 
SVN-Revision: 22846
 2010-08-30 22:59:20 +00:00
Florian Fainelli
2e343d9760 add 2.6.35 support 
SVN-Revision: 22800
 2010-08-25 19:56:08 +00:00
Florian Fainelli
b1becffa5b update to 2.6.32.20 
SVN-Revision: 22766
 2010-08-22 17:07:37 +00:00
Daniel Dickinson
a5fdf57a1b base-files: diag.sh: For power button as preinit status led, end with led left on, not off 
SVN-Revision: 22466
 2010-08-02 19:33:08 +00:00
Daniel Dickinson
d391ca2c8c base-files: brcm63xx.sh: Added comtrend (96348GW-11) to routers with buttons and leds on preinit 
SVN-Revision: 22465
 2010-08-02 19:32:59 +00:00
Daniel Dickinson
99d0f9ea05 patches-2.6.32/33: Reset button on Comtrend routers is GPIO 33 not GPIO 32 
SVN-Revision: 22464
 2010-08-02 19:32:40 +00:00
Jo-Philipp Wich
00cc52f14b reorder profiles 
SVN-Revision: 22390
 2010-07-26 18:58:35 +00:00
Jo-Philipp Wich
7831006360 fix a typo in 040-bcm963xx_flashmap.patch 
SVN-Revision: 22386
 2010-07-25 00:10:37 +00:00