Commit graph

342 commits

Author SHA1 Message Date
Jonas Gorski
38719ecca4 swconfig: drop linux < 3.13 code paths
The oldest kernel we support is 3.18, no need to keep code paths
for older kernels.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48471
2016-01-24 12:35:59 +00:00
Jonas Gorski
2b3b4c95f1 b53: update header register difinitions
BCM531x5 has two pontential cpu ports, and header mode can be enabled
independently on both.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48302
2016-01-18 10:46:47 +00:00
Felix Fietkau
f8d2ec6e9d ar8327: add IGMP Snooping support
This add support for IGMP Snooping on atheros switches (disabled by default),
which avoids flooding the network with multicast data.

Tested on TL-WDR4300: disabling IGMP Snooping results in multicast flooding
on each specific port, enabling it back again prevents each port from
receiving all multicast packets.

Partially based on: http://patchwork.ozlabs.org/patch/418122/

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48268
2016-01-17 10:42:46 +00:00
Rafał Miłecki
5f69279dd6 swconfig: add API for setting port link speed
Some switches can force link speed for a port. Let's add API that will
allow drivers to export this feature.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48142
2016-01-06 18:32:21 +00:00
John Crispin
71cd537a8a swconfig: switch kernel PORT_LINK support to SWITCH_TYPE_LINK
As explained earlier, using SWITCH_TYPE_LINK gives more flexibility,
it doesn't require e.g. string parsing to read some data.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47999
2015-12-23 19:25:02 +00:00
John Crispin
67e10d757f swconfig: add SWITCH_TYPE_LINK and support sending link info to user space
So far we were sending link data as a string. It got some drawbacks:
1) Didn't allow writing clean user space apps reading link state. It was
   needed to do some screen scraping.
2) Forced whole PORT_LINK communication to be string based. Adding
   support for *setting* port link required passing string and parting
   it in the kernel space.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47997
2015-12-23 19:24:30 +00:00
Felix Fietkau
814d70b2fd ar8216: rework/fix AR8337 MAC swap handling
In r45970 the MAC swap handling was made opt-in, however some boards
have been forgotten during the conversion. Since the reference design
uses this MAC swapping, and pretty much all known boards using this chip
seem to do so too, enabling the swapping is a more reasonable default
than leaving it disabled.

Change the code to still allow boards to opt-out of this.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47956
2015-12-20 14:25:45 +00:00
Jonas Gorski
813227d992 kernel: mvswitch: merge 3.10+ compile fix into the code
The lowest we support is 3.18, so no need to keep it as a separate
patch.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 47749
2015-12-04 09:45:07 +00:00
John Crispin
7fe0940c69 generic: fix adm6996 init
Kernel 3.14 added aditional genphy_soft_reset phy reset to phy_init_hw in drivers/net/phy/phy_device.c
Since adm6996 does in driver soft reset and doesn't use BMCR_RESET for soft reset
add dummy soft_reset callback to adm6996 driver, like it is done in ar8216.

This fixes ticket #20147

Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com>

SVN-Revision: 47272
2015-10-26 10:39:53 +00:00
Felix Fietkau
18c01061a9 mvsw61xx: match swconfig function names
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 46865
2015-09-11 16:34:49 +00:00
Felix Fietkau
b75d188b21 mvsw61xx: use standard swconfig get_port_link
The previous "link" and "status" functions were non-standard,
and thus less useful for parsing.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 46864
2015-09-11 16:34:35 +00:00
Imre Kaloz
9cca6c5ad9 Previously, all VLANs (port-based or 802.1q) were sharing a single database in the ATU. This created problems in the case of a system where two ports/devices share a MAC address (e.g. Linksys WRT1900AC eth0/eth1).
This also clears any bootloader-set FDB defaults. This had
caused issues creating port-based VLANs when mappings
overlapped previous VLANs. Packets destined to a port
not in the default port group flooded all ports.

Tested on a 88E6171 (Linksys EA4500) and 88E6172 ('1900AC)

Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46699
2015-08-21 08:09:52 +00:00
Felix Fietkau
b04b1ca933 ar8216: add swconfig attributes for ARL table flushing
Add swconfig attributes for flushing the ARL table globally or per port.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 46382
2015-07-15 08:17:42 +00:00
Felix Fietkau
33b72b8e0f ar8216: adjust ATU flushing in case of link changes
If a link goes down, don't flush the complete ARL table.
Only flush the entries for the respective port.
Don't touch ARL table if a link goes up.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 46381
2015-07-15 08:17:36 +00:00
Felix Fietkau
00e599b0b7 ar8216: add ARL table flushing per port
Adds functions for flushing ARL table entries per port.

Successfully tested on AR8327. Implementation for AR8216/AR8236/AR8316
is based on the AR8236 datasheet and assumes that the three chips
share a common ATU register layout.
Compile-tested only for AR8216/AR8236/AR8316.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 46380
2015-07-15 08:17:28 +00:00
Felix Fietkau
2666403c3a ar8216: add reading ARL table for AR8216/AR8236/AR8316
Adds the chip-specific part of reading ARL table for AR8216/AR8236/AR8316.

It's based on the AR8236 datasheet and compile-tested only as I couldn't
find datasheets for AR8216/AR8316 and don't own devices with these chips.

The existing ar8216_atu_flush implementation was used for all three
chip types, therefore I guess they share a common ATU register layout.

More testing would be appreciated.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 46379
2015-07-15 08:17:23 +00:00
Hauke Mehrtens
d0aca89c18 kernel: b53: fix build with brcm47xx
The position of the nvram header file on brcm47xx changed with kernel
version 4.1.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46170
2015-07-03 23:27:21 +00:00
Rafał Miłecki
5c809ecfe7 b53: Allow using all 8 ports on BCM53011
On two tested devices: Netgear R6250 (BCM53011 rev 2) and Luxul XWC-1000
(BCM53011 rev 3) it was possible to use port 7 and eth1 (instead of port
5 and eth0). It seems BCM53011 just like BCM53012 has 8 ports and
usually 3 of them are connected to the SoC.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46104
2015-06-21 21:06:09 +00:00
Felix Fietkau
4a9d726200 ar8216: Fix problem with AR8337 MAC swap handling
AR8337 supports a configuration bit to swap MAC0 and MAC6.
Currently this is set in general if an AR8337 is detected and causes
issues with devices using an AR8334 (internally an AR8337, just
less chip pins).
And it might even cause issues with AR8337-based devices with
different board designs.

Swapping the MAC's however isn't needed for AR8337 in general.
It's just needed in case of certain board designs (affected devices
seem to be based on Atheros reference board AP135/136-010).
Therefore this configuration bit should be moved to platform data.

The patch includes the needed changes to the device initialization
code of affected devices. Hopefully I didn't miss any ..

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 45970
2015-06-14 17:43:50 +00:00
Jonas Gorski
9fbd6d0ba0 b53: fix memory out of bounds access on 64 bit targets
On device reset the sizes for the vlan and port tables were wrongly
calculated based on the pointer size instead of the struct size. This
causes buffer overruns on 64 bit targets, resulting in panics.

Fix this by dereferencing the pointers.

Reported-by: Fedor Konstantinov <blmink@mink.su>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45938
2015-06-10 09:21:36 +00:00
Jonas Gorski
d24d5412ff b53: widen stp state mask to 3 bits (instead of 2)
At least on my b53 chip, the mask is 3 bits wide, and because
of this some STP states are not set properly and discarded when read.

Maybe for some other chips it makes sense to have just 2 bits width,
but I don't have other versions around to test/validate.

If that's the case then maybe we could add another STP state mask.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45937
2015-06-10 09:21:31 +00:00
Rafał Miłecki
e93c68eedd b53: Allow using all ports on BCM53012
This chipset has at least 8 usable ports, e.g. Netgear R8000 has ports
5, 7 and 8 connected to Ethernet interfaces:
vlan1ports=0 1 2 3 5 7 8*
vlan2ports=4 8u
Port 6 seems to be always disabled.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45676
2015-05-12 13:18:53 +00:00
Rafał Miłecki
06ac2f5c74 b53: improve overriding CPU port state on BCM5301X
On BCM5301X there are two different cases to handle: CPU port 8 vs. any
other one. Support for CPU port 8 was already partially implemented but
it lacked setting some extra bit for 2G speed. It also will need to be
extended to implement "SMP dual core 3 GMAC setup". That's the reason
for handling it in separated code block.
This patch also adds overriding CPU port state for port other than 8. It
requires using recently defined GMII_PORT registers.
It was tested for regressions on BCM53011 revs 2 & 3. It was also
confirmed to fix switch on some internal Broadcom board.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45402
2015-04-12 20:00:42 +00:00
Jonas Gorski
4e826d8303 b53: clean up code to match kernel style better
* properly enclose macro arguments in paranthesis on use
* remove trailing white space
* convert C99 // comments
* add missing blank lines after declaration
* remove braces from single statement blocks
* split lines > 80 chars (except for one)

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45356
2015-04-10 10:29:04 +00:00
Jonas Gorski
61885f95f0 b53: define registers available and needed on BCM5301X
They are also present on some BCM63xx switches.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45355
2015-04-10 10:28:46 +00:00
Jonas Gorski
87568ebeac b53: reverse duplex bit meaning for IMP state override register
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44875
2015-03-18 10:44:15 +00:00
Jonas Gorski
085b8e0014 b53: global config is part of the management page, not the control page
It will now actually enable the mib counters instead of enabling rx/tx for
the first switch port.

Reported-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44788
2015-03-15 14:19:28 +00:00
John Crispin
57c7bed820 swconfig: fix build with linux 4.0
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44617
2015-03-06 07:57:03 +00:00
Jonas Gorski
d75cd5be37 b53: fix mmap register read/writes > 32 bit
For bcm63xx integrated switches, broadcom changed the data endianess
to match the system endianess. But this only applies to within one word,
which causes 48/64 bit values to be still split into their "litte endian"
groups.

E.g. 48 bit values (with 5 being the most significant byte) aligned

0x00 ..01  or   0123
0x04 2345       45..

will become

0x00 ..10 resp. 3210
0x04 5432       54..

Likewise for 64 bit values.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44568
2015-02-27 17:40:17 +00:00
John Crispin
28353b3fc5 kernel: fix compile error inside adm6996.c
drivers/net/phy/adm6996.c:881:5: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'u32' [-Wformat=]

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44333
2015-02-09 12:09:17 +00:00
Felix Fietkau
f7ece95303 ar8216: prefix mii_xxx functions to avoid kernel namespace pollution
Prefix the exported mii_xxx32 functions with ar8xxx_
to avoid kernel namespace pollution.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44105
2015-01-24 19:42:12 +00:00
Felix Fietkau
3a313a3e11 ar8216: add swconfig attribute to display ARL table on AR8327/AR8337
Add global read-only swconfig attribute "arl_table" to display the
address resolution table.
So far the chip-specific part is implemented for AR8327/AR8337 only
as I don't have the datasheets for the other AR8XXX chips.

Successfully tested on TL-WDR4300 (AR8327rev2)
and TL-WDR4900 (AR8327rev4).

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44104
2015-01-24 19:42:06 +00:00
Felix Fietkau
6ce848f622 ar8216: decrease page switch wait time
Until a few years ago the page switch wait time was set to msleep(1)
what was changed to usleep_range(1000, 2000) later.

I can not imagine that a low-level operation like switching page
on register level takes so much time.
Most likely the value of 1ms was initially set to check whether
it fixes an issue and then remained w/o further checking whether
also a smaller value would be sufficient.

Now the wait time is set to 5us and I successfully tested this on
AR8327. IMHO 5us should be plenty of time for all supported chips.
However I couldn't test this due to missing hardware.

If other chips should need a longer wait time we can add the
wait time as a parameter to the ar8xxx_chip struct.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44103
2015-01-24 19:42:01 +00:00
Felix Fietkau
a1fba9dfbe ar8216: add link change detection for switch ports
Check for switch port link changes and
- flush ATU in case of a change
- report link change via syslog

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44102
2015-01-24 19:41:55 +00:00
Felix Fietkau
74146c62c0 ar8216: fix ATU flushing
The functionality to flush the address translation table contains two bugs
which luckily compensate each other.
1. Just setting the operation is not sufficient to perform the flushing.
   The "active" bit needs to be set to actually trigger an action.
   For the vtu operations this is implemented correctly.
2. ar8xxx_phy_read_status is called every 2s by the phy state machine
   to check for link changes. This would have caused an ATU flush
   every 2s.

Fix the chip-specific ATU flush functions and remove the ATU flush call
from ar8xxx_phy_read_status.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44101
2015-01-24 19:41:51 +00:00
Felix Fietkau
6dfea16ab9 ar8216: display flow control info in swconfig get_link in case of autonegatiation too
The swconfig get_link attribute (at least) on AR8327/AR8337 doesn't
consider the autonegotiated flow control.
AR8327/AR8337 provide the info about autonegotiated rx/tx flow control
in bits 10 and 11 of the port status register.
Use these values to display info about autonegotiated rx/tx flow
control as part of the get_link attribute.

Successfully tested on TL-WDR4900 (AR8327 rev.4) and
TL-WDR4300 (AR8327 rev.2).

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44023
2015-01-18 00:54:06 +00:00
Felix Fietkau
53c0c6054f ar8216: add 802.3az EEE info to swconfig get_link attribute
AR8327/AR8337 allow to read the result of EEE autonegotiation.
If EEE is autonegotiated between the link partners, display
this as part of the swconfig get_link attribute.

eee100:  100MBit EEE supported by both link partners
eee1000: 1GBit EEE supported by both link partners

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44022
2015-01-18 00:53:59 +00:00
Felix Fietkau
bdc0750191 ar8216: introduce enable_eee swconfig attribute to control 802.3az EEE per port
Users reported network issues with AR8327 which turned out to be caused
by EEE not working correctly with certain link partners (ticket 14597).
The workaround was to disable EEE on all ports (changeset 41577).

The issue was with certain link partners only, therefore this patch
allows to control usage of EEE per port via swconfig.
Still the default is to initially disable EEE on all ports.

Successfully tested on a TL-WDR4900 (AR8327 rev.4)

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44021
2015-01-18 00:53:53 +00:00
John Crispin
64ccdb98fb ar8216: introduce ar8xxx_reg_clear complementing ar8xxx_reg_set
Introduce ar8xxx_reg_clear complementing ar8xxx_reg_set.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44004
2015-01-17 14:24:56 +00:00
John Crispin
0fb39e6f4b ar8216: replace ar8xxx_rmw with ar8xxx_reg_set where appropriate
Replace ar8xxx_rmw with ar8xxx_reg_set where appropriate.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44003
2015-01-17 14:24:47 +00:00
John Crispin
1cb2596f19 ar8216: define all switch_addr structs as const
Define all switch_addr structs as const.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44002
2015-01-17 14:24:40 +00:00
Luka Perkov
9db3df9d6b mvsw61xx: track and set per-VLAN port state in STU
Since the driver doesn't know anything about (M)STP
we just hard-set the ports to be enabled if they are
part of the VLAN.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43938
2015-01-11 17:20:16 +00:00
Luka Perkov
0b2cbeca7a mvsw61xx: clean up and expand register definitions
- eliminate MV_CPUPORT; not necessary since we define
  the CPU port(s) via Device Tree

- add STU and expand VTU operations

- update register names to match those of 88E61xx rather than
  mvswitch's 88E6060

- use more consistent formatting

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43937
2015-01-11 17:20:06 +00:00
Luka Perkov
1e39f3aef8 mvsw61xx: rework chip recognition
Recognizes 88E6171/6172/6176 at the moment.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43936
2015-01-11 17:20:03 +00:00
Luka Perkov
a1872182bb mvsw6171: rename to 'mvsw61xx'
In preparation for properly supporting switches
beyond the 88E6171.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43935
2015-01-11 17:19:58 +00:00
Felix Fietkau
1cbf0fbcb4 ar8216: factor out AR8327/AR8337-specific driver code into ar8327.c
Move all AR8327/AR8337-specific driver code into a separate source file
ar8327.c and adjust patches so that ar8327.c is compiled if
CONFIG_AR8216_PHY is set.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43845
2015-01-05 13:03:07 +00:00
Felix Fietkau
cc02d4c72d ar8216: move definitions from ar8216.c to ar8216.h and introduce ar8327.h
Move several structure definitions and #defines from ar8216.c
to ar8216.h and move AR8327/AR8337 header stuff into a new
header file ar8327.h.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43844
2015-01-05 13:02:57 +00:00
Felix Fietkau
5506420980 kernel: remove openwrt micrel.c (replaced by upstream driver)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43762
2014-12-22 14:37:07 +00:00
Luka Perkov
0847247129 mvsw6171: note support for 88E6172 switches
The '6171 and '6172 are similar enough to work
without any changes to the code.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43753
2014-12-19 22:02:59 +00:00
Felix Fietkau
2f9b042d69 ar8216: Inline function ar8xxx_create_mii
Inline function ar8xxx_create_mii.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43743
2014-12-18 11:28:47 +00:00