Commit graph

26429 commits

Author SHA1 Message Date
John Crispin
665c51935e ralink: fix uartf memory range size
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39235
2014-01-12 12:07:30 +00:00
John Crispin
6278a892d8 ralink: honour memory@0 node
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39234
2014-01-12 12:07:26 +00:00
John Crispin
0ac291d073 ralink: fix rt5350 ethernet
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39233
2014-01-12 12:07:20 +00:00
John Crispin
c1a2a87f3a netifd: fix mac80211.sh to respect setting of mcast_rate
This patch fixes a bug in /lib/netifd/wireless/mac80211.sh, where
the UCI setting of wireless multicast traffic (in uci: mcast_rate)
is not respected within netifd. Especially in Freifunk mesh networks
the olsr routing as effected by this, as only the lowest mcast_rate
was used, even when uci ncast_rate was set to something else.
In function mac80211_setup_adhoc() the value of mcast_rate is missing
in json_get_vars.

Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>

SVN-Revision: 39232
2014-01-12 12:07:15 +00:00
John Crispin
2f9048d8d3 hostapd: fix frequency setting for IBSS/RSN
Introduced by ("netifd: add wireless configuration support and port mac80211 to
the new framework")

Reported-by: René van Weert <rene@sowifi.com>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>

SVN-Revision: 39231
2014-01-12 12:07:11 +00:00
John Crispin
f58b424c9e lantiq: improve Arcadyan ARV4510PW support
Arcadyan ARV4510PW has already a build profile in OpenWrt, but it is
severely lacking. This patch brings it up-to-date.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 39230
2014-01-12 12:07:07 +00:00
John Crispin
4810de8e4b swconfig: improve usability when switch device incorrect
http://patchwork.openwrt.org/patch/4701/

Signed-off-by: Andreas Mohr <andim2@users.sf.net>

SVN-Revision: 39229
2014-01-12 12:07:01 +00:00
John Crispin
ace5076a35 libjson-c: also install .pc file for compatibility libjson
Older packages, which did not follow the renaming yet, do not
find the library otherwise via pkgconfig.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 39228
2014-01-12 12:06:57 +00:00
John Crispin
efad45bb0b samba: add browsable option
https://dev.openwrt.org/ticket/14682

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39227
2014-01-12 12:06:53 +00:00
John Crispin
bdb1865236 lantiq: fix atm compile
https://dev.openwrt.org/ticket/14633

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39226
2014-01-12 12:06:47 +00:00
John Crispin
0dfad7923e add git-src to .gitignore
Signed-off-by: Daniel Golle <daniel.golle@gmail.com>

SVN-Revision: 39225
2014-01-12 12:06:39 +00:00
Jo-Philipp Wich
f126298a7c rpcd: build, uci and session api fixes
- fix CMakeFile to support rpcd out of tree builds
	- fix a possible file descriptor leak in the session deserialization code
	- add uci.state call which is equivalent to uci -P /var/state get ...
	- make uci.changes "config" argument optional to allow listing all deltas in one go
	- fix inverted check in uci.commit and uci.revert, resulting in eroorneous permission denied responses
	- only trigger config change events if libuci was able to parse the config
	- rename misleading "commit" argument of uci.apply to the more appropriate name "rollback"

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 39224
2014-01-12 11:52:40 +00:00
Zoltan Herpai
719b57cbc1 sunxi: various changes - let LBDAF be set by generic config - add high-speed timer support - refresh sun5i USB patch
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39223
2014-01-11 21:58:29 +00:00
Zoltan Herpai
1ae42098e9 sunxi: add support for Olinuxino A10 LIME
Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39222
2014-01-11 17:19:04 +00:00
Zoltan Herpai
f8911b3197 uboot-sunxi: add support for Olinuxino A10 LIME
Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39221
2014-01-11 17:17:17 +00:00
Gabor Juhos
0e2586a774 kernel: update 3.10 to 3.10.26
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39220
2014-01-11 16:06:37 +00:00
Gabor Juhos
30ebad2dee ar71xx: ag71xx: increase calculated max frame length value
The r39147 commit introduces a regression: at lease on some routers
with ar8216 switch large packets get lost if 802.1q tagged port is
used on the interface connected to the aforementioned switch.

The r39147 changes code in the way so interface is set to accept
packets no longer than max ethernet frame length for a given mtu.

Unfortunately ar8216 has a feature: it sends two additional bytes
as a packet header and those this header needs to be added to the
max frame length. Otherwise long enough packets get lost.

The problem only manuifests itself if interface is used in vlan
tagged mode. If interface is untagged then ar8216's header fits
into space used by 802.1q tag and not packets are lost.

Include two additional bytes in the max frame length calculation
to fix the issue.

This patch is tested and works with Trendnet TEW-632BRP.

Signed-off-by Nikolay Martynov <mar.kolya@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4656/
[juhosg:
  - simplify the patch to include the additional bytes of the
    switch header unconditionally,
  - change subject and update commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39219
2014-01-11 11:15:30 +00:00
Zoltan Herpai
2d2254c9ce sunxi: add/refresh patches for cubieboard2
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39218
2014-01-10 10:47:41 +00:00
Gabor Juhos
c977d49a29 ar71xx: my net n750: simplify LNA GPIO setup
Use the ath79_wmac_set_ext_lna_gpio helper instead
of exporting the GPIOs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39217
2014-01-10 09:37:59 +00:00
Gabor Juhos
cc3beb9c76 ar71xx: my net n600: simplify LNA GPIO setup
Use the ath79_wmac_set_ext_lna_gpio helper instead
of exporting the GPIOs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39216
2014-01-10 09:37:58 +00:00
Gabor Juhos
182e8ef949 ar71xx: add a helper function for external LNA GPIO setup
The built-in wireless MAC of the AR934x SoC can handle
external LNAs and the control signal of the LNAs can be
routed to any GPIO line. Add a helper function which
can be used to configure the GPIO lines.

The helper function will be used for AR934x boards
which are using externel LNAs to improve sensitivity.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39215
2014-01-10 09:37:57 +00:00
Gabor Juhos
32aef686f7 ar71xx: Fix WD My Net N600 weak signal issue
The LNAs need to be enabled by setting their respective GPIO to high even
though the original firmware's setting sets them to low on initialization.

Obviously the LNAs are then later initialized by the driver on the OEM
firmware. Without this fix the device is mostly "deaf".

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Tested-by: Steven Haigh <netwiz@crc.id.au>
Patchwork: http://patchwork.openwrt.org/patch/4689/
[juhosg:
  - remove the GPIO LED changes, the My Net N600 has no yellow LEDs at all,
  - change subject and update the commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39214
2014-01-10 09:07:12 +00:00
Gabor Juhos
01727717f7 ar71xx: Fix WD My Net N750 weak signal issue
The LNAs need to be enabled by setting their respective GPIO to high even
though the original firmware's setting sets them to low on initialization.

Obviously the LNAs are then later initialized by the driver on the OEM
firmware. Without this fix the device is mostly "deaf".

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Patchwork: http://patchwork.openwrt.org/patch/4688/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39213
2014-01-10 09:07:11 +00:00
Gabor Juhos
8384c0dba0 ath9k: add workaround for AR9331 USB host controller hang with USB1.1 devices
When wifi radio is reset, some bits in (undocumented) USB registers may
flip. Patch adds setting them after radio reset (channel change, up/down).
With this patch stability of USB1.1 full-speed devices, connected directly
to AR9331 host port (no USB2.0 hub) is improved.

See "ar9331's usb stability issue" OpenWrt forum thread for details:
  <https://forum.openwrt.org/viewtopic.php?id=39956>

Based on QCA's Open HAL WAR_USB_DISABLE_PLL_LOCK_DETECT() macro:
  <https://github.com/qca/qcamain_open_hal_public/blob/master/hal/ar9300/ar9300_reset.c#L74>

Adapted to Linux mac80211 driver for 8Devices Carambola2 board by Mantas Pucka:
  <b08b59ceb4>

Ported to latest OpenWrt BB branch and tested on TP-Link TL-WR703N by
Michel Stempin <michel.stempin@wanadoo.fr>.

Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr>
[juhosg: refresh and clean up the ath9k patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39212
2014-01-10 09:05:31 +00:00
Jo-Philipp Wich
6dcf878864 jsonpath: make output in non-export mode more shell friendly
SVN-Revision: 39211
2014-01-08 22:01:55 +00:00
Imre Kaloz
5c3cb628f8 upgrade the Linaro binutils to 2.24-2013.12
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39210
2014-01-07 15:03:55 +00:00
Imre Kaloz
f6be067784 upgrade Linaro GCC 4.8 to 4.8-2013.12
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39209
2014-01-07 15:00:33 +00:00
Imre Kaloz
7aaa9bc91c add x86_64 target support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39208
2014-01-07 12:23:35 +00:00
Imre Kaloz
8603b30db5 virtualbox emulates the e1000 for a long time now
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39207
2014-01-07 10:21:31 +00:00
Imre Kaloz
cc49f7c6e9 move most of the x86 image generation options to the main file
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39206
2014-01-07 10:18:55 +00:00
Zoltan Herpai
481c01136e sunxi: refresh usb vbus patch
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39205
2014-01-06 23:34:31 +00:00
Zoltan Herpai
ba05c97e5e sunxi: various fixes - DT: update USB vbus from 3.3v to 5v - emac: add missing free_irq - DT: add emac aliases - DT: fix interrupts on A20 - modules: add watchdog module - don't compile in mac80211 - don't compile in usbnet
Thanks to Hans de Goede, Zalan Blenessy et al.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39204
2014-01-06 21:51:39 +00:00
Hauke Mehrtens
e0027ed4ab bcm53xx: make the l2x0 L2 cache controller work
This fixes the DMA problems with the Ethernet driver.
This also updates some other parts of the patches.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39203
2014-01-04 23:46:44 +00:00
Hauke Mehrtens
2bc9700c0d bcm53xx: update the ethernet core hacks
The PHY always says there is no link
Instead of doing this dma sync a mdelay does the same trick and it is as unreliable.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39202
2014-01-04 18:27:09 +00:00
Hauke Mehrtens
5a55ace3b8 kernel: bgmac: update the driver patches to a version submitted for mainline kernel.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39201
2014-01-04 18:25:05 +00:00
Zoltan Herpai
815ceabd9d sunxi: emac changes - move emac into module - add into profiles where appropriate
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39200
2014-01-04 17:33:44 +00:00
Zoltan Herpai
9712b2d6fa sunxi: add sata driver to profiles where appropriate
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39198
2014-01-04 16:39:31 +00:00
Zoltan Herpai
34ca9f355e sunxi: add sata driver for sun[47]i
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39197
2014-01-04 16:30:56 +00:00
Zoltan Herpai
9808a0830b sunxi: move sunxi-sid (security ID) off to module
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39196
2014-01-04 13:46:43 +00:00
Zoltan Herpai
1ffc2deed4 sunxi: move rtc off to module
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39195
2014-01-04 12:47:51 +00:00
Zoltan Herpai
662e5c224c sunxi: add the actual mmc driver
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39194
2014-01-04 11:08:27 +00:00
Zoltan Herpai
78936aa875 sunxi: delete a31 reset for now in lack of the mach split
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39193
2014-01-04 11:02:16 +00:00
Zoltan Herpai
c2f62ecc25 add support for pcDuino board
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39192
2014-01-04 10:09:52 +00:00
Zoltan Herpai
4800b2c723 update version
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39191
2014-01-04 10:08:31 +00:00
Zoltan Herpai
51d5e458a3 sunxi: add support for pcDuino board
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39190
2014-01-04 10:06:17 +00:00
Zoltan Herpai
c98c6ef201 sunxi: add mmc support - add MMC support for sun457i - update kernel config to compile in MMC and ext4 - update kernel cmdline
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39189
2014-01-04 10:02:01 +00:00
Zoltan Herpai
2657412374 sunxi: various fixes - have Kconfig options ordered - add new olinuxino a13-micro board - various fixes for EHCI
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39188
2014-01-04 09:55:41 +00:00
Zoltan Herpai
4a314d1805 sunxi: remove sun6i/7i split for now
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39187
2014-01-04 09:49:44 +00:00
Zoltan Herpai
6b61e7786c sunxi: refresh clock framework
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39186
2014-01-04 09:47:50 +00:00
Jo-Philipp Wich
2e02c2da18 Add jsonpath - a command line utility to extract values from JSON data using XPath-like expressions
SVN-Revision: 39185
2014-01-02 11:55:16 +00:00