Commit graph

12423 commits

Author SHA1 Message Date
Marcin Jurkowski
35129469ca mbim: add metric, defaultroute and peerdns options for mbim protocol
Adds generic network options for mbim protocol dynamic interfaces
as suggested by Felix in
https://lists.openwrt.org/pipermail/openwrt-devel/2016-February/039794.html.

This depends on netifd patch https://patchwork.ozlabs.org/patch/686820/.

Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
2016-10-26 12:37:46 +02:00
Marcin Jurkowski
72eb2b8e22 comgt: add metric, defaultroute and peerdns options for directip protocol
Adds generic network options for directip protocol dynamic interfaces
as suggested by Felix in
https://lists.openwrt.org/pipermail/openwrt-devel/2016-February/039794.html.

This depends on netifd patch https://patchwork.ozlabs.org/patch/686820/.

Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
2016-10-26 12:37:46 +02:00
Marcin Jurkowski
c560d25d19 comgt: add metric, defaultroute and peerdns options for ncm protocol
Adds generic network options for ncm protocol dynamic interfaces
as suggested by Felix in
http://lists.openwrt.org/pipermail/openwrt-devel/2016-February/039794.html.

This depends on netifd patch https://patchwork.ozlabs.org/patch/686820/.

Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
2016-10-26 12:37:46 +02:00
Yutang Jiang
e7dc511e64 uboot-zynq: fix compile error for be short of dtc
While enable zynq uboot:
CONFIG_PACKAGE_uboot-zynq-zc702
CONFIG_PACKAGE_uboot-zynq-zed
CONFIG_PACKAGE_uboot-zynq-zybo

make will arise dtc error:
./scripts/dtc-version.sh: line 17: dtc: command not found
./scripts/dtc-version.sh: line 18: dtc: command not found
*** Your dtc is too old, please upgrade to dtc 1.4 or newer
make[4]: *** [checkdtc] Error 1

Pass the kernel dtc to uboot for compile.

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-26 12:37:46 +02:00
Alberto Bursi
d140648622 grub2: move to Boot Loaders category
because boot loaders are in Boot Loaders, not in Utilities -> Boot Loaders

Also moved brub2-editenv in Utilities -> Boot Loaders

Part of a wider housekeeping effort on the packages repository.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-10-26 12:37:45 +02:00
Alberto Bursi
f9ed2bc92f fconfig: move to Boot Loaders submenu of Utilities
Boot Loaders submenu of Utilities is the most logical place to find fconfig and other bootloader tools.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-10-26 12:37:45 +02:00
Alberto Bursi
762928a13e rbcfg: move to Boot Loaders submenu of Utilities
Boot Loaders submenu of Utilities is the most logical place to find rbcfg and other bootloader tools.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-10-26 12:37:45 +02:00
Paul Wassi
da1b33fc4d package/system/mtd: fix usage message
Minor fix in the usage message on the explanation of the -p option.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2016-10-26 12:37:45 +02:00
John Crispin
7b9ac39afa ugps: update to latest git HEAD
* fixes a few error that uClibc users were seeing
* add switch to disable time adjustment

Signed-off-by: John Crispin <john@phrozen.org>
2016-10-26 12:37:40 +02:00
Jo-Philipp Wich
81b256ee00 uhttpd: fix handling of special "/" prefix when matching handlers
The special prefix of "/" should match any url by definition but the final
assertion which ensures that the matched prefix ends in '\0' or '/' is causing
matches against the "/" prefix to fail.

Update to current HEAD in order to fix this particular case.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-25 16:38:50 +02:00
Imre Kaloz
3764caa934 mvebu: add support for the Linksys WRT3200ACM (Rango)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-10-24 08:45:06 +02:00
Imre Kaloz
5da412bf80 mwlwifi: upgrade to 10.3.2.0-20161013
Also install the 88W8964 firmware.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
2016-10-24 08:45:06 +02:00
Rafał Miłecki
2187f57db6 base-files: add ucidef_set_led_usbport for full usbport support
This helper allows using usbport trigger directly. It requires usbport
compatible syntax and supports specifying multiple USB ports, e.g.:
ucidef_set_led_usbport "usb" "USB" "devicename:colour:function" "usb1-port1" "usb2-port1"

This adds a proper object to the board.json, e.g.
"usb": {
	"name": "USB",
	"type": "usbport",
	"sysfs": "devicename:colour:function",
	"ports": [
		"usb1-port1",
		"usb2-port1"
	]
}
and supports translating it into uci section.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-22 11:16:01 +02:00
Hannu Nyman
66d604d4a8 busybox: adjust download mirror
* Adjust download locations:
  - use https as busybox.net permanently redirects http to https
  - gentoo mirror has neither 1.25.0 nor 1.25.1 available, so drop it
    in favor of buildroot.net that has 1.25.1

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2016-10-21 15:49:01 +03:00
Felix Fietkau
70af3bfd57 libreadline: set ABI_VERSION to force rebuild of dependent packages
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-10-19 20:26:54 +02:00
Felix Fietkau
0c3de24d92 procd: update to the latest version, fixes a few minor service handling issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-10-19 15:33:41 +02:00
Rafał Miłecki
d0b50c2770 kernel: drop usbdev LED trigger
It was LEDE's trigger that was replaced by upstream usbport one.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-19 12:09:45 +02:00
Rafał Miłecki
0658527e1e switch to the new usbport LED trigger
This makes init.d script handle existing UCI entries using the new
trigger. It also switches all targets to use its package.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-19 12:09:45 +02:00
Ben Greear
1ffb7e47be Latest ath10k CT 988X firmware (beta-18).
*  Backport much of the 10.2 firmware features from upstream QCA driver.
     This includes ANI support, adaptive CCA, tx-hang workarounds,
     and lots of other things.
     Not all of this may be enabled at this point, and more code waits to
     be backported as time and motivation allows.

  *  Fix some rate-control issues where ath10k in station mode (at least), would
     sometimes get stuck at low rates.  This appeared to be a probe related
     state machine issue in the firmware, so I added some timeout logic to kick
     the state machine if it gets stuck.  This signicantly improves throughput
     tests with many stations.

  *  Support configuring WMI WD timeout using SET_SPECIAL API.

  *  Properly configure the rx-mask on bootup to work around problem found
     by Mr. Kazior.  This should remove the need to add the driver hack he
     posted.

  *  Allow configuring pdev failed-retry threshold.  This is how many consecutive
     tx failures the firmware will allow before resetting the wifi chip (not a full
     firmware crash).

Signed-off-by: Ben Greear <greearb@candelatech.com>
2016-10-19 11:13:15 +02:00
Ben Greear
536420647a ath10k-ct: Update to latest 4.7 CT ath10k driver.
Adds Sebastian's 160Mhz support (un-tested), remove DMA32 change that
broke some x86 systems, allow setting 10.1 CT firmware keepalive watchdog
timeout, support QCA 9887 hardware, and some other tweaks.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2016-10-19 11:13:11 +02:00
Rafał Miłecki
81fd64df81 kernel: add package for usbport LED trigger
This is upstream alternative for LEDE's ledtrig-usbdev. It's main
advantages are:
1) Support for assigning more than 1 USB port to the LED
2) Setting proper state when activating with device already connected
3) FWIW it's an upstream driver

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-18 14:27:14 +02:00
Pierre Lebleu
6bb11d52f3 procd: Allow initscripts to start one daemon instance at a time
Signed-off-by: Pierre Lebleu <pierre.lebleu@technicolor.com>
2016-10-18 08:53:38 +02:00
Alberto Bursi
5c96200dab xfsprogs: install path consistent with fs tools
changed install path from /sbin to /usr/sbin to be consistent with other filesystem tools
ext2-3-4 and f2fs tools are in /usr/sbin, for example

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-10-18 08:51:46 +02:00
Felix Fietkau
b7b223be41 mac80211: backport some upstream a-msdu tx fixes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-10-17 12:18:25 +02:00
Felix Fietkau
be7f2abb60 iperf: used an updated renamed tarball instead of main upstream URL
iperf upstream added some bugfixes to the already released 2.0.9 version
without changing the filename. This conflicts with old mirrored files
and the hash that we previously used.
To avoid conflict, use a renamed tarball from mirror2.openwrt.org
containing the new upstream changes

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-10-17 11:16:31 +02:00
Felix Fietkau
5f9598a432 mac80211: fix build error in ath10k with hwmon enabled
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-10-17 11:01:37 +02:00
Stijn Tintel
39f8e46bb4 busybox: add upstream patch to fix send_to_from
This fixes ntpd when queries are sent to secondary IPv4 IP addresses.
See https://bugs.busybox.net/show_bug.cgi?id=9146

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2016-10-15 20:45:10 +03:00
Stijn Tintel
859d30d521 busybox: update to version 1.25.1
Dropped upstream patches:
000-busybox-1.25.0-gzip.patch
000-busybox-1.25.0-ip.patch
000-busybox-1.25.0-ntpd.patch

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2016-10-15 20:45:10 +03:00
Hauke Mehrtens
7b6fca0e32 procd: update sha256sum
Commit f5c741b5e0 updated procd to a more recent version, but did not
change the hash of the tar. Update it to the one matching the file on
the download servers.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-10-15 17:56:23 +02:00
Mathias Kresin
18bb1c9391 ltq-adsl-mei: fix build error
The file to patch doesn't exists. Due to the fact that a src directory
exists, the patch was never applied.

With 28502a9 the behaviour was changed and revealed the issue.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-15 16:46:42 +02:00
John Crispin
f5c741b5e0 procd: update to latest git HEAD revision
Signed-off-by: John Crispin <john@phrozen.org>
2016-10-15 11:36:53 +02:00
Alexandru Ardelean
5b607bd8d8 boot/rbcfg: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:53 +02:00
Alexandru Ardelean
ba7cba95f2 kernel/wrt55agv2-spidevs: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:53 +02:00
Alexandru Ardelean
8fe09409da kernel/w1-gpio-custom: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:53 +02:00
Alexandru Ardelean
e09ff19752 kernel/trelay: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:53 +02:00
Alexandru Ardelean
9168abe8b5 kernel/spi-gpio-custom: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:53 +02:00
Alexandru Ardelean
7b3ba5a3a9 kernel/rtc-rv5c386a: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:53 +02:00
Alexandru Ardelean
ca599bb2a7 kernel/rotary-gpio-custom: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:53 +02:00
Alexandru Ardelean
28502a928c kernel/lantiq/ltq-*: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:53 +02:00
Alexandru Ardelean
f56f749d30 kernel/i2c-gpio-custom: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:52 +02:00
Alexandru Ardelean
a1236a30a0 kernel/gpio-button-hotplug: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:52 +02:00
Alexandru Ardelean
4f9c6c5235 kernel/button-hotplug: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:52 +02:00
Alexandru Ardelean
9f5770b81f kernel/avila-wdt: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:52 +02:00
Alexandru Ardelean
a24442c4f3 network/utils/maccalc: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:52 +02:00
Alexandru Ardelean
0af93f8f30 network/utils/rssileds: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:52 +02:00
Alexandru Ardelean
808a618bc4 network/utils/resolveip: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:52 +02:00
Alexandru Ardelean
964f8bc4e5 network/utils/owipcalc: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:52 +02:00
Alexandru Ardelean
d0345c6bb6 network/ipv6/map: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:52 +02:00
Alexandru Ardelean
3f8598feaf network/utils/iwcap: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:52 +02:00
Alexandru Ardelean
598722956b network/services/ead: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:52 +02:00