Commit graph

205 commits

Author SHA1 Message Date
Matthias Schiffer
d58c8f4029
mac80211: revert "wireless: set correct mandatory rate flags"
Revert upstream commit 1bd773c077de "wireless: set correct mandatory rate
flags", as it breaks 11s interoperability: nodes can only associate when
neither or both have this patch. As this is a regression from released
versions, revert to the old code for now.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-26 23:30:23 +01:00
Matthias Schiffer
e9fa0b9f3a
ath9k, ath10k(-ct): move spectral scan support under a separate config symbol
Backport patches that separate spectral scan support from general debugfs
support of ath9k/ath10k; this allows to remove the dependency on
KERNEL_RELAY from these driver packages even with debugfs enabled and
avoids the memory footprint of the relay buffers allocated by ath9k/ath10k
even when they aren't used at all.

The KERNEL_RELAY dependency is moved to a new config symbol that enables
spectral scan support in these drivers.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:45 +01:00
Luis Araneda
1c139d664b mac80211: enable brcmfmac's SDIO support on sunxi target
Needed to support some SDIO connected cards, like AMPAK modules

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2017-11-17 08:20:22 +01:00
Felix Fietkau
f9fa266faf mac80211: update to wireless-testing 2017-11-01
The wireless regdb is now loaded via firmware loading, CRDA support and
built-in regdb support have been removed.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-16 15:23:35 +01:00
Jonas Gorski
3689f7c8ef mac80211: ath10k: switch to AutoProbe
Now that we have working module dependency generation, we can switch to
AutoProbe and let modprobe handle loading required modules.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-10-27 13:06:15 +02:00
Hauke Mehrtens
08bbb804c8 mac80211: ath6kl: add missing usb-core dependency to kmod-ath6kl-usb
This fixes a build problem with many targets.

Fixes 618ed77a17 ("mac80211: add ath6kl kernel modules")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-15 10:53:46 +02:00
Ben Whitten
618ed77a17 mac80211: add ath6kl kernel modules
Allow board to include the ath6kl kernel modules.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
2017-10-15 00:24:21 +02:00
Felix Fietkau
609208597b mac80211: update to wireless-testing 2017-10-06
Rework the code to get rid of some extra kernel module dependencies
introduced in the last update.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-10-13 11:45:57 +02:00
Hauke Mehrtens
a8f63a0717 mac80211: update to backports-4.14-rc2
This updates mac80211 to backprots-4.14-rc2.
This was compile and runtime tested with ath9k, ath10k and b43
with multiple stations and ieee80211w and in different scenarios by many
other people.

To create the backports-4.14-rc2-1.tar.xz use this repository:
https://git.kernel.org/pub/scm/linux/kernel/git/backports/backports.git
from tag v4.14-rc2-1

Then run this:
./gentree.py --git-revision v4.14-rc2 --clean  <path to linux repo> ../backports-4.14-rc2-1

This also adapts the ath10k-ct and mt76 driver to the changed cfg80211
APIs and syncs the nl80211.h file in iw with the new version from
backports-4.14-rc2.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-01 12:49:11 +02:00
Hauke Mehrtens
45d0b88e44 mac80211: make iwlwifi select AC support
Some NICs supported by this driver support ieee80211 AC.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-17 15:08:53 +02:00
Hauke Mehrtens
aa00d11526 linux-firmware: pack Intel iwl FW separately
Do not create one big package with all the Intel firmware files
supported by the iwlwifi driver, but use a separate package for each
chip.

This also updates some 7000 and 8000 series firmware files to more
recent version. The older versions shipped are not supported by the
current driver any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-17 15:08:52 +02:00
Lorenzo Santina
fd84ecda7d treewide: fix shellscript syntax errors/typos
Fix multiple syntax errors in shelscripts (of packages only)
These errors were causing many conditions to not working properly

Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
[increase PKG_RELEASE, drop command substitution from directip.sh]
Signed-off-by: Mathias Kresin <dev@kresin.em>
2017-09-13 08:07:54 +02:00
Felix Fietkau
c6c1f6a548 mac80211: use KERNEL_MAKEOPTS
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-06-07 18:31:10 +02:00
Hans Ulli Kroll
ce7681d328 mac80211: add support for rtl8821ae pcie adapter
Add support for Realtek RTL8821AE/RTL8812AE PCIe adapter.
This device supports 802.11ac and bluetooth

testet on PC Engines APU with AP and STA mode

Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
2017-05-21 23:51:21 +02:00
Matthias Schiffer
1a16cb9c67
mac80211, hostapd: always explicitly set beacon interval
One of the latest mac80211 updates added sanity checks, requiring the
beacon intervals of all VIFs of the same radio to match. This often broke
AP+11s setups, as these modes use different default intervals, at least in
some configurations (observed on ath9k).

Instead of relying on driver or hostapd defaults, change the scripts to
always explicitly set the beacon interval, defaulting to 100. This also
applies the beacon interval to 11s interfaces, which had been forgotten
before. VIF-specific beacon_int setting is removed from hostapd.sh.

Fixes FS#619.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-13 17:12:54 +02:00
Felix Fietkau
00b32b8326 mac80211: fix kconfig recursive dependency warning
Make brcmfmac depend on !TARGET_uml.
Technically, brcmfmac could be built for uml because only SDIO support
won't work on that target. However, selectively avoiding the dependency
propagation of !TARGET_uml from kmod-mmc to avoid including a reference
to BRCMFMAC_SDIO doesn't work.

In practice, brcmfmac is completely useless on uml, so let's just
disable it there.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-04-18 09:45:18 +02:00
Jonas Gorski
7d4147d869 mac80211: add rt2x00 debug symbols to PKG_CONFIG_DEPENDS
Chaning these symbols require a recompilation of the modules, so make the
system aware of it.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-04-12 12:48:35 +02:00
Jonas Gorski
5ba8185866 mac80211: manually apply dependencies to prevent a recoursive one
Apply the !UML dependency to both the symbol and the DEPENDS so there is
no recursive dependency anymore.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-04-12 12:48:35 +02:00
Matthias Fritzsche
796629207b mac80211: conistent wireless.wiki.kernel.org
Change all the URLs to wireless.wiki.kernel.org to have
the same protocol, domain and path.

Signed-off-by: Matthias Fritzsche <txt.file@txtfile.eu>
2017-04-12 10:57:54 +02:00
Christian Lamparter
cc189c0b7f mac80211: enable ath10k AHB support for QCA4019
This patch enables the ATH10K_AHB support for the QCA4019
devices on the AHB bus.

This patch also removes 936-ath10k_skip_otp_check.patch
because it breaks the AHB device identification.
"Patch is wrong. I find it frustrating OpenWRT/LEDE doesn't
try to work with upstream on ixing these things right."

[1] <https://www.mail-archive.com/ath10k@lists.infradead.org/msg05896.html>

It also limits ath10k memory hunger (This is a problem with 128MiB RAM)

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2017-03-22 09:45:18 +01:00
Álvaro Fernández Rojas
d3a2068b8d mac80211: mwifiex-sdio: select DRIVER_11AC_SUPPORT
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-03-11 19:32:34 +01:00
Álvaro Fernández Rojas
a856c8a824 mac80211: mwifiex-pcie: select DRIVER_11AC_SUPPORT
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-03-11 19:32:32 +01:00
Álvaro Fernández Rojas
26d1b66895 mac80211: mwifiex-sdio: select kmod-mmc instead of PCI_SUPPORT
Should fix buildbot issues.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-03-11 19:32:14 +01:00
Henryk Heisig
fb436f49ad mac80211: add support for Marvell 802.11n/802.11ac SDIO Wireless cards
This adds option to build kernel module and firmware packages
for a Marvell 8887 SDIO Wireless device

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2017-03-11 14:16:28 +01:00
Yousong Zhou
8d8ef24eeb mac80211: hwsim: select DRIVER_11AC_SUPPORT and DRIVER_11W_SUPPORT
This is required for default wireless configuration of malta target to
work out of the box again.  Fixes "77ece30e: hostapd: Add ability to
specify that that wireless driver supports 802.11ac"

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-02-24 21:35:31 +08:00
Felix Fietkau
649e766a64 mac80211: update to wireless-testing 2017-01-31
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-06 12:27:12 +01:00
Felix Fietkau
47540afa5d ath9k: add a warning to the tx99 config option
Lots of users try random stuff when they encounter any kind of
difficulty. I've had to debug a number of cases where people had enabled
this option for no reason. Hopefully this warning will reduce the number
of useless support cases.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-02 12:44:38 +01:00
Stijn Tintel
b13e103d71 ath5k: select 802.11w support
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-01-03 20:53:48 +01:00
Felix Fietkau
236bf83bb6 brcmfmac: select 802.11ac support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 12:10:37 +01:00
Alexis Green
8f3d8c0022 mac80211: ath10k specifies that it supports 802.11ac mode
Signed-off-by: Alexis Green <agreen@cococorp.com>
2016-12-20 16:24:22 +01:00
Felix Fietkau
720b99215d treewide: clean up download hashes
Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-16 22:39:22 +01:00
Alexey Brodkin
84d57fc485 mac80211: Make wlcore platform-independent
TI wl18xx and wl12xx are Wi-Fi/Bluetooth combo modules
that could be found on different existing boards.

But it is possible to get those modules as a separate
component and use with existing boards as well as
new boards equipped with either module may appear so we
remove dependency on OMAP instead we add dependency on MMC
because this Wi-Fi module uses SDIO interface.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Jo-Philipp Wich <jo@mein.io>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2016-11-16 10:54:33 +01:00
Matthias Schiffer
fa845e9978
ath9k: add support for the HSR tuner of the Ubiquiti UAP Outdoor+
Without setting the HSR to the selected channel, the WLAN of the UAP
Outdoor+ will exhibit high packet loss in RX.

Based-on-patch-by: Stefan Rompf <stefan@loplof.de>
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-11-15 18:54:06 +01:00
Christian Lamparter
5f8f8a3661 base-files, mac80211, broadcom-wl: wifi detection and configuration
Currently, the wifi detection script is executed as part of
the (early) boot process. Pluggable wifi USB devices, which
are inserted at a later time are not automatically
detected and therefore they don't show up in LuCI.

A user has to deal with wifi detection manually, or restart
the router.

However, the current "sleep 1" window - which the boot
process waits for wifi devices to "settle down" - is too
short to detect wifi devices for some routers anyway.

For example, this can happen with USB WLAN devices on the
WNDR4700. This is because the usb controller needs to load
its firmware from UBI and initialize, before it can operate.

The issue can be seen on a BT HomeHub 5A as well as soon as
the caldata are on an ubi volume. This is because the ath9k
card has to be initialized by owl-loader first. Which has to
wait for the firmware extraction script to retrieve the pci
initialization values inside the caldata.

This patch moves the wifi configuration to hotplug scripts.
For mac80211, the wifi configuration will now automatically
run any time a "ieee80211" device is added. Likewise
broadcom-wl's script checks for new "net" devices which
have the "wl$NUMBER" moniker.

Issues with spawning multiple interface configuration - in
case the detection script is run concurrently - have been
resolved by using a named section for the initial
configuration. Concurrent configuration scripts will now
simply overwrite the same existing configuration.

A workaround which preserves the "sleep 1" window for just
the first boot has been added. This allows the existing
brcm47xx boot and mvebu uci-default scripts to correctly
setup the initial mac addresses and regulatory domain.

And finally, the patch renames the "wifi detect" into
"wifi config". As the script no longer produces any output
that has to be redirected or appended to the configuration
file.

Thanks to Martin Blumenstingl for helping with the implementation
and testing of the patch.

Acked-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-03 11:08:01 +01:00
Felix Fietkau
ad51e09fd1 mac80211: update to wireless-testing 2016-10-08
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-10-13 17:06:03 +02:00
Álvaro Fernández Rojas
f7670a2d07 mac80211: stop brcmfmac from selecting all SDIO firmwares
Now that we have firmwares separated and brcm2708 being the only target that
actually selects SDIO support, avoid selecting all firmwares by default.
sunxi should select the proper firmwares once SDIO support is enabled and
tested.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-15 20:23:46 +02:00
Álvaro Fernández Rojas
daa5691a4d linux-firmware: separate packages for Broadcom FullMAC SDIO firmwares
Using few packages will allow saving some space by decreasing rootfs
size.

Moreover there are more firmware files that may require packaging and
even more to come later.

This can especially useful now, with per device rootfs.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-15 20:23:46 +02:00
Rafał Miłecki
65c5d097a4 mac80211: stop brcmfmac from selecting all PCIe firmwares
Now we have firmwares separated and bcm53xx selecting required ones make
use of it to actually save that rootfs space.
Other targets using brcmfmac (brcm2708 and sunxi) use SDIO interface and
firmware so they don't won't be affected.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-14 22:12:57 +02:00
Rafał Miłecki
ac887f4832 linux-firmware: separate packages for Broadcom FullMAC PCIe firmwares
Using few packages will allow saving some space by decreasing rootfs
size. Dropping 43602a1 firmware saves 316 580 B. Dropping 4366b1 saves
468 188 B.

Moreover there are more firmware files that may require packaging and
even more to come later (e.g. 4366c0).

This can especially useful now, with per device rootfs.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-13 10:31:01 +02:00
Toke Høiland-Jørgensen
e58c20aac3 ath9k: Set ATH9K_STATION_STATISTICS when enabling debugging
The ATH9K_STATION_STATISTICS kernel config variable enables some extra
statistics that are useful for debugging (in particular with the airtime
fairness patches enabled). This adds that kernel config when selecting
ath9k debugging.

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
2016-08-23 13:30:59 +02:00
Felix Fietkau
78ae53ff2f mac80211: make package ath9k-common hidden
It cannot be selected independently of ath9k and ath9k-htc

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-09 19:38:49 +02:00
Felix Fietkau
67a7daa938 mac80211: update to wireless-testing 2016-06-20
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 19:34:50 +02:00
Hauke Mehrtens
ffcae8b494 prism54-firmware: add also other p54 firmware to own package
Extract the other p54 firmware files into the prism54-firmware package.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
2016-06-30 19:42:59 +02:00
Felix Fietkau
7eeb254cc4 treewide: replace nbd@openwrt.org with nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-07 08:58:42 +02:00
Daniel Golle
3ec4803932 mac80211: respect user-set regulatory domain by default
It turns out most device vendors don't set the correct country code
in their devices' on-flash-EEPROM sections as they apparently rather
provide a complete per-target-market firmware with patched drivers
instead of just setting the country code.
This results in the driver to incorrectly assume the value stored in
the on-flash-EERPOM (usually US or China) being the regulatory domain
inside which the device is being used.
To work around this issue, OpenWrt introduced the ATH_USER_REGD config
variable to decide during build whether or not to allow the user to
override the regulatory domain setting. This option, however, is not
enabled by default and thus ends up being disabled for snapshots builds
and released binaries.
As we know for a long time that most devices got borked regulatory
domain values set in their EEPROMs we should allow our users to respect
their local law (instead of just assume US or China laws).
Note that also the current default has great potential of users not
ever setting their regulatory domain and thus using inapproriate and
potentially illegal frequencies and/or tx-power settings

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-06-05 13:37:55 +02:00
Felix Fietkau
b08dbd3acf mac80211: disable iwlwifi build for linux 3.18
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-01 01:14:31 +02:00
Felix Fietkau
48ff6eff8c mac80211: add missing config symbols to PKG_CONFIG_DEPENDS
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 00:11:55 +02:00
Helmut Schaa
262cec2fb8 mac80211: Allow selection of TX99 support in ath9k
Add a new config option to enable TX99 support in ath9k.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
2016-05-18 14:59:41 +02:00
Felix Fietkau
df93d53a4b mac80211: update to wireless-testing 2016-05-12
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-15 20:55:39 +02:00
John Crispin
63a9c61fb6 mac80211: build airo on x86 only
airo requires ISA_DMA_API and
that symbol is only set on some ppc,malta,x86
x86 is probably only platform where that driver is used

fixes buildbot errors on ar71xx,lantiq ...:
airo.ko is missing

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 49073
2016-03-23 12:52:24 +00:00