Commit graph

19514 commits

Author SHA1 Message Date
Jo-Philipp Wich
d5cf09642c patch-specs.sh: fallback to ext-toolchain.sh --wrap if spec file patching is not possible (gcc < 4.3.0)
SVN-Revision: 29945
2012-01-29 17:42:58 +00:00
Jo-Philipp Wich
86ddf7c7a8 ext-toolchain.sh: support --wrap with src == dest
SVN-Revision: 29944
2012-01-29 17:42:10 +00:00
Florian Fainelli
8c4813b75e add default and Sim.One profiles
SVN-Revision: 29942
2012-01-29 15:00:36 +00:00
Florian Fainelli
0bb50678de add 3.2 support
SVN-Revision: 29941
2012-01-29 15:00:33 +00:00
Florian Fainelli
e82f06639e add another 3.2 framebuffer symbol
SVN-Revision: 29940
2012-01-29 15:00:29 +00:00
Florian Fainelli
ad808cf7e6 add support for 3.2 kernel
SVN-Revision: 29939
2012-01-29 15:00:25 +00:00
Hauke Mehrtens
b9da4dcb6b switch: fix some memory leaks in switch_parse_vlan()
SVN-Revision: 29936
2012-01-28 13:52:37 +00:00
Florian Fainelli
eeb00634a7 add support for the Atheros AP113 reference board
This reference board is equipped with:
- AR7242 SoC
- AR9580 on-board Wi-Fi
- AR8316 switch

SVN-Revision: 29935
2012-01-28 13:19:49 +00:00
Florian Fainelli
405a0f3905 refresh 3.2 patches
SVN-Revision: 29934
2012-01-28 13:19:43 +00:00
Jo-Philipp Wich
478d9fc97e autoconf: another relocatability fix for autom4te, substitute hardcoded prefix with $STAGING_DIR when reading autom4te.cfg
SVN-Revision: 29931
2012-01-28 04:42:15 +00:00
Jo-Philipp Wich
537164cb6d automake: generate relative aclocal symlinks in staging_dir
SVN-Revision: 29929
2012-01-28 03:51:22 +00:00
Jo-Philipp Wich
cb6f860b8f make sure .config gets copied as file When using scripts/env, .config is most likely a symbolic link pointing to env/.config. Previously the symbolic link got copied as-is into the SDK tarball, leading to a dangling .config symlink on the target system which prevented the SDK from working.
SVN-Revision: 29927
2012-01-28 03:30:30 +00:00
Hauke Mehrtens
d1c07b3657 brcm47xx: add fix for cardbus host controller
These devices have two devices on the bus, the host controller itself and the device.

SVN-Revision: 29923
2012-01-27 20:10:51 +00:00
Hauke Mehrtens
45329cd793 mac80211: fix patch when running on ssb based devices
SVN-Revision: 29922
2012-01-27 20:08:49 +00:00
Felix Fietkau
90805c366c ath9k: revert one more linux upstream commit in the initvals to fully fix the ar938x tx power issue
SVN-Revision: 29920
2012-01-27 15:35:29 +00:00
Felix Fietkau
34106f7eaa ath9k: fix initvals for high-power ar938x devices, fixes tx power on buffalo wzr-hp-g450h
SVN-Revision: 29918
2012-01-27 11:06:32 +00:00
Gabor Juhos
b9b768b8d3 ar71xx: use 64k block size for WZR-HP-AG300H
SVN-Revision: 29917
2012-01-27 10:42:41 +00:00
Gabor Juhos
ac8116739a ar71xx: fix sysupgrade image building of atheros boards after r29899
SVN-Revision: 29916
2012-01-27 07:51:09 +00:00
Gabor Juhos
013fe76b36 ar71xx: create the temporary directory before building initramfs images
Thanks to Florian for reporting.

SVN-Revision: 29915
2012-01-26 21:28:34 +00:00
Gabor Juhos
a5538a18d4 ar71xx: create a profile and build images for Compex WPE72
[juhosg: remove ath9k from the the profile package list, build WPE72
image with the Default profile as well]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 29914
2012-01-26 17:01:44 +00:00
Gabor Juhos
1338af2640 firmware-utils/mkmylofw: add WPE72 support
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 29913
2012-01-26 17:01:43 +00:00
Gabor Juhos
e1e84badaa ar71xx: add support for Compex WPE72/WPE72NX
This patch adds support for Compex WPE72 bare board and Compex WPE72NX
Indoor Access Point.

[juhosg: add support to 3.2 as well]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 29912
2012-01-26 17:01:41 +00:00
Gabor Juhos
1c4f6b4308 generic: add WPE72 ID to myloader.h
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 29911
2012-01-26 17:01:38 +00:00
Gabor Juhos
b3fdd931d1 ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards
This patch adds support for the Sitecom WL-341 v3 and other Sercomm
IP1006RRv2 based boards for sysupgrade support and for the initial
flash through pushbutton initiated recovery mode with the special
partition table and fixes for the quirks and things required by the
modified bootloader.

There is a known bug, Wi-Fi is not working on my board probably
because of the lack of RAM (the board only has 16MiB ram -- half of
the normal amount for non rebadged versions, but there is an empty
slot for another ram chip,) but I don't know for sure. The driver
loads but hostapd fails to load so I think it's not related to the
specific device except for the lack of RAM.

Moreover, only 7 of the 11 onboard leds are confirmed working, it
seems that one of the others is always on and the remaining ones are
connected to the wireless card leds already recognized by OpenWrt

[juhosg: reordered some parts in order to keep things sorted
alphabetically]

Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>

SVN-Revision: 29910
2012-01-26 10:44:23 +00:00
Gabor Juhos
c859e4a1db mac80211: enable support for RaLink Rt53xx USB devices in rt2800usb
Hi!

On Mon, Nov 14, 2011 at 03:01:34PM +0100, Daniel Golle wrote:
> The driver works quite nice and stable for me using a RaLink Rt5370 USB device.
>
> Signed-off-by: Daniel Golle <dgolle@allnet.de>
>
> Index: package/mac80211/Makefile
> ===================================================================
> --- package/mac80211/Makefile	(revision 29114)
> +++ package/mac80211/Makefile	(working copy)
> @@ -1147,6 +1147,7 @@
>  	CONFIG_RT2800_LIB=$(if $(CONFIG_PACKAGE_kmod-rt2800-lib),m) \
>  	CONFIG_RT2800PCI=$(if $(CONFIG_PACKAGE_kmod-rt2800-pci),m) \
>  	CONFIG_RT2800USB=$(if $(CONFIG_PACKAGE_kmod-rt2800-usb),m) \
> +	CONFIG_RT2800USB_RT53XX=$(if $(CONFIG_PACKAGE_kmod-rt2800-usb),y) \
>  	CONFIG_RTL8180=$(if $(CONFIG_PACKAGE_kmod-rtl8180),m) \
>  	CONFIG_RTL8187=$(if $(CONFIG_PACKAGE_kmod-rtl8187),m) \
>  	CONFIG_RTL8192CE= \

Aparently this was wrong, CONFIG_RT2800USB_RT53XX is supposed to live in
BUILDARGS rather than MAKE_OPTS to actually get support for the Rt5370.
Thanks to actmnophn for the hint!

This reverts changeset 29116 and adds it to the right section in the Makefile.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29906
2012-01-25 07:44:46 +00:00
Gabor Juhos
038d4e0d77 ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and modify LED behaviour
This patch fixes the board detection of the TL-MR3020.

The LED behaviour has also been modified:
* The WPS LED is the diag LED now.
* A netdev trigger for the LAN LED has been added.

The profile of the TL-MR3020 has been updated because the needed package
"kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev
trigger for the 3G/USB LED.

[juhosg: the board name changes has been removed, and the kernel files
has been changed instead.]

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29905
2012-01-25 07:44:45 +00:00
Gabor Juhos
c11ac55b29 ar71xx: TL-MR3020: fix GPIO polarity for button and switch
This patch fixes the GPIO polarity for the button and the sliding
switch. The buttons are not active low. "Pressed" and "Released"
events are wrong without the patch.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29904
2012-01-25 07:44:43 +00:00
Felix Fietkau
6f94da6587 netifd: update to latest, fixes a crash when the interface protocol was not specified
SVN-Revision: 29903
2012-01-24 21:44:00 +00:00
Jo-Philipp Wich
e1d199bbbc hostapd: introduce a client_cert option which is passed on to wpa_supplicant (#8876)
SVN-Revision: 29901
2012-01-24 20:54:13 +00:00
Gabor Juhos
4f3d6c9ae9 ar71xx: use the lzma loader on the Planex boards
SVN-Revision: 29900
2012-01-24 20:12:10 +00:00
Gabor Juhos
5fa9768cee ar71xx: rename Sysupgrade/{KR,RK} to Sysupgrade/{KR,RK}uImage
SVN-Revision: 29899
2012-01-24 20:12:08 +00:00
Gabor Juhos
095c236694 ar71xx: fix the AP/Router LED definitons on MZK-W300NH
SVN-Revision: 29897
2012-01-24 18:40:38 +00:00
Gabor Juhos
23e1b451dc ar71xx: preset WLAN LED config on MZK-W300NH
SVN-Revision: 29896
2012-01-24 18:40:36 +00:00
Gabor Juhos
23836d5908 ar71xx: remove hardcoded MTD layout from planex files
SVN-Revision: 29895
2012-01-24 18:40:34 +00:00
Gabor Juhos
859c915077 ar71xx: pass mtdlayout to Planex boards via command line
SVN-Revision: 29894
2012-01-24 18:40:33 +00:00
Gabor Juhos
6ad9bf8d17 ar71xx: remove an unused header file
SVN-Revision: 29893
2012-01-24 18:40:31 +00:00
Gabor Juhos
02e77c6ae1 ramips: generate sysupgrade image for the ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29884
2012-01-24 11:48:48 +00:00
Gabor Juhos
944c8aacdb ramips: add user-space support for ALL0256N
This adds uci-defaults and sysupgrade support for the ALL0256N.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29883
2012-01-24 11:48:47 +00:00
Gabor Juhos
1932a7205c ramips: add kernel support for ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29882
2012-01-24 11:48:45 +00:00
John Crispin
a558d605ab Initial DSL framework
- Removed ifx_cpe_control_init.sh (the old init script)
- Created dsl_control (/etc/init.d)
- tidied up start and stop
- stop calls dsl_notify before killing daemon
- has status and lucistat options to provide detail
- copes with daemon not running situation
- Updated package makefile to use new init script and to build cli support
- Provide a dsl_notify.sh script to cope with line up/down events

Signed-off-by: Lee Essen <lee.essen@nowonline.co.uk>

SVN-Revision: 29881
2012-01-24 11:31:23 +00:00
Gabor Juhos
17bb003891 ar71xx: nuke fs_all variable in image/Makefile
SVN-Revision: 29880
2012-01-24 09:47:25 +00:00
Gabor Juhos
1fb88e2541 ar71xx: create interim kernel files in a separate dir
This reduces the size of the ImageBuilder tarball a lot.

SVN-Revision: 29879
2012-01-24 09:47:23 +00:00
Gabor Juhos
a43e2f508f ar71xx: prebuild all loaders in Image/Prepare stage
SVN-Revision: 29878
2012-01-24 09:47:22 +00:00
Gabor Juhos
faf17f197f ImageBuilder: respect the PROFILE parameter
Based on a patch from #10766

SVN-Revision: 29877
2012-01-24 09:47:20 +00:00
Felix Fietkau
53c6db5ab4 hostapd: merge an upstream workaround for broken clients sending the wrong wpa type (should fix #9561)
SVN-Revision: 29876
2012-01-24 01:49:23 +00:00
Gabor Juhos
9cf1d4e06e ramips: scripts updates
In this patch:

* rename Argus leds to avoid underscores
* rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235
* remove Belkin F5D8235 v1 status led defined as storage led (it was
  defined as usb led earlier, just in wrong place) - it should have
  router led as in v2
* add Argus, Sparklan and Belkin F5D8235 v2 status leds
* add Belkin F5D8235 v1 and v2 usb leds
* fix Belkin F5D8235 v2 network config generation and mac address axtraction
* fix Sparklan board identification
* add Sparklan usb led (this board doesn't have usb connector by
  default and the led is hidden also but if you are going to solder
  the connector then you'll see the led too)
* add Sparklan network config generation and mac address extraction
* fix empty string test in network script and...
* ...sort case entries by the first board in the list

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29871
2012-01-23 10:23:32 +00:00
Gabor Juhos
44517a3789 ar71xx: 3.2: fix build errors if PCI is not enabled
SVN-Revision: 29870
2012-01-23 08:52:21 +00:00
Gabor Juhos
778db0a13d ar71xx: fix compiler warning if PCI is not enabled
SVN-Revision: 29869
2012-01-23 08:52:18 +00:00
Gabor Juhos
af015f956c ar71xx: add initial support for 3.2
Tested on the following boards:
  ALFA AP96
  TL-MR3220 v1
  TL-WR1043ND v1
  TL-WR2543ND v1
  TL-WR703N v1
  TL-WR741ND v1
  TL-WR741ND v4
  WNDR3700 v1
  WZR-HP-G300NH

SVN-Revision: 29868
2012-01-22 22:38:19 +00:00
Gabor Juhos
386cbfe45b ar71xx: move arch specific files to files-2.6.39
SVN-Revision: 29867
2012-01-22 22:38:11 +00:00