Commit graph

23241 commits

Author SHA1 Message Date
Gabor Juhos
c75c1e03a3 firmware-utils/mktplinkfw: add support for the TL-WDR4900 v1
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35593
2013-02-13 16:51:24 +00:00
Gabor Juhos
9d86ba2ed4 mpc85xx: enable swconfig and the ar8216 driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35592
2013-02-13 16:51:23 +00:00
Gabor Juhos
6d18518e02 mpc85xx: enable the squashfs driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35591
2013-02-13 16:51:21 +00:00
Gabor Juhos
c3b3f77621 mpc85xx: enable XZ_DEC_BCJ and XZ_DEC_POWERPC support
Squashfs is unable to decompress some blocks without that:

[  199.494500] SQUASHFS error: xz_dec_run error, data probably corrupt
[  199.500910] SQUASHFS error: squashfs_read_data failed to read block 0xbff26
[  199.508016] SQUASHFS error: Unable to read data cache entry [bff26]
[  199.514440] SQUASHFS error: Unable to read page, block bff26, size 153f8
[  199.521311] SQUASHFS error: Unable to read data cache entry [bff26]
[  199.527724] SQUASHFS error: Unable to read page, block bff26, size 153f8
[  199.534594] SQUASHFS error: Unable to read data cache entry [bff26]
[  199.541009] SQUASHFS error: Unable to read page, block bff26, size 153f8

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35590
2013-02-13 16:51:19 +00:00
Gabor Juhos
7484006498 ar71xx: fix factory image creation for dir-825-c1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35589
2013-02-13 16:36:26 +00:00
Gabor Juhos
5f10ec3c36 ar71xx: fix switch-config for dir-825-c1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35588
2013-02-13 16:36:23 +00:00
Hauke Mehrtens
54ca3eed5d brcm47xx: configure vlan correctly on some recent devices.
SVN-Revision: 35587
2013-02-13 16:05:52 +00:00
Hauke Mehrtens
17c18e23ab switch: add support for BCM53125
SVN-Revision: 35586
2013-02-13 16:05:32 +00:00
Hauke Mehrtens
446414f367 switch: resetting and enabling vlan write for gigabit switches
This patch makes it possible to reset and enable writing vlans to recent switchs.

This is based on a patch by jcharest and the Broadcom SDK.

SVN-Revision: 35585
2013-02-13 16:05:13 +00:00
Hauke Mehrtens
43b4f67f25 switch: read and write vlan config from and to gigabit switches
This patch makes it possible to read and write the vlan config from and to recent switchs.

This is based on a patch by jcharest and the Broadcom SDK.

SVN-Revision: 35584
2013-02-13 16:04:50 +00:00
Hauke Mehrtens
8ab78d1096 switch: improve robo_switch_enable()
This is based on a patch by jcharest and the Broadcom SDK.

SVN-Revision: 35583
2013-02-13 16:04:18 +00:00
Hauke Mehrtens
b8a84038a5 switch: fix switches with more than 6 ports
This is based on a patch by jcharest and the Broadcom SDK.

SVN-Revision: 35582
2013-02-13 16:03:47 +00:00
Hauke Mehrtens
3c51948454 switch: reverse if else in handle_vlan_port_read()
SVN-Revision: 35581
2013-02-13 16:03:27 +00:00
Hauke Mehrtens
9d3b0f5661 switch: the BCM5365 is a special switch and the BCM5350 or BCM5325 is the normal case.
This makes it easier to compare this code with the code from the Broadcom SDK.

SVN-Revision: 35580
2013-02-13 16:03:03 +00:00
Hauke Mehrtens
827e315017 switch: reset switch before using it.
SVN-Revision: 35579
2013-02-13 16:02:41 +00:00
Hauke Mehrtens
f3360fdf67 switch: improve error handling in robo_probe()
SVN-Revision: 35578
2013-02-13 16:02:20 +00:00
Hauke Mehrtens
3f0c0c6935 switch: run cleanfile over the source code
SVN-Revision: 35577
2013-02-13 16:01:50 +00:00
Felix Fietkau
31718416e6 mac80211: add some small fixes for minstrel_ht CCK support
SVN-Revision: 35576
2013-02-13 09:53:28 +00:00
Hauke Mehrtens
4663d424a3 brcm47xx: add some more fixes to bgmac
Thank you Rafał Miłecki and Nathan Hintz

SVN-Revision: 35574
2013-02-12 20:10:38 +00:00
Hauke Mehrtens
7c0208b336 brcm47xx: update tg3 to the version send upstream
SVN-Revision: 35573
2013-02-12 20:09:15 +00:00
Luka Perkov
7973ef64d6 mvebu: remove boards suffix
SVN-Revision: 35572
2013-02-12 10:18:53 +00:00
Gabor Juhos
bae4bfe3f8 kernel: update linux 3.7 to 3.7.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35571
2013-02-12 09:51:11 +00:00
Steven Barth
99b69fd9c5 odhcp6c: allow setting a user-provided prefix as well
SVN-Revision: 35570
2013-02-12 08:23:54 +00:00
Jo-Philipp Wich
eeaf2c0b5a iptables: fix bad PKG_RELEASE in previous commit
SVN-Revision: 35569
2013-02-11 22:14:38 +00:00
Jo-Philipp Wich
916902b1d2 iptables: add --lenient switch to iptables-restore and ip6tables-restore that allows to skip erroneous lines
SVN-Revision: 35568
2013-02-11 21:58:42 +00:00
Gabor Juhos
1f9ede9cfc ar71xx: add script for automatic switch name migration
Thanks to Jonas Gorski for the help.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35567
2013-02-11 21:41:16 +00:00
Felix Fietkau
0564b6beef mac80211: add CCK rate support to minstrel_ht to improve range
SVN-Revision: 35566
2013-02-11 18:59:14 +00:00
Felix Fietkau
1810b80ec0 mac80211/hostapd: short_preamble is a per-vif option and should be enabled by default
SVN-Revision: 35565
2013-02-11 18:59:10 +00:00
Felix Fietkau
2e7a4b088d ar71xx: allow unknown multicast frames to pass to the CPU on AR934x
SVN-Revision: 35564
2013-02-11 18:59:05 +00:00
Gabor Juhos
9525a075c1 ar8216: remove superfluous code from ar8216_config_init
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35562
2013-02-11 16:57:31 +00:00
Gabor Juhos
94806a13af ar71xx: use switchX names in network configuration
Accessing the AR8xxx switches via the name of the
attached ethernet device is not possible since
r35560. Change the uci-defaults script to use
switchX names in switch configurations.

Reported-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35561
2013-02-11 16:54:52 +00:00
Gabor Juhos
9c86d268eb generic: ar8216: don't use ethernet device name in register_switch
The switches are accessed via an MDIO bus. Set the alias
to the name of the MDIO bus, and show that in the message
along with the name of the switch switch device.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35560
2013-02-11 16:11:31 +00:00
Gabor Juhos
3f3eba88f6 generic: ar8216: reuse the private data from ar8216_probe
The private data of the switch is already
allocated in ar8216_priv, assign that to
each PHY on the same MDIO bus. Also remove
the redundant code from ar8216_config_init.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35559
2013-02-11 16:11:30 +00:00
Gabor Juhos
1afb759b35 generic: ar8216: use phydev instead of pdev everywhere
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35555
2013-02-11 13:25:43 +00:00
Gabor Juhos
0b1fe07e8e generic: ar8216: use pr_* macros for kernel messages
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35554
2013-02-11 13:14:00 +00:00
Steven Barth
b8c796fbd7 odhcp6c: Various bugfixes * Don't send undesired suggestions for preferred and valid lifetimes * Be less verbose in logging
SVN-Revision: 35553
2013-02-11 12:30:16 +00:00
Gabor Juhos
eea297884e generic: ar8216: fix PHY features setup
Sujith says:

This commit breaks the WAN port on my AP96 - DHCP fails.
Reverting it fixes the issue.

  commit b67cc3a0cdd02973610d4d5a63226d1c44841e94
  Author: juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73>
  Date:   Fri Feb 8 09:13:18 2013 +0000

    generic: ar8216: simplify phy features setup

    Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

    git-svn-id: svn://svn.openwrt.org/openwrt/trunk@355183c298f89-4303-0410-b956-a3cf2f4a3e73

This change restores the previous behaviour and moves
the code into the ar8216_probe function.

Reported-by: Sujith Manoharan <sujith@msujith.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Tested-by: Sujith Manoharan <sujith@msujith.org>

SVN-Revision: 35549
2013-02-11 10:05:35 +00:00
Gabor Juhos
617076c613 generic: ar8216: add ar8xxx_probe_switch helper
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35547
2013-02-10 19:02:01 +00:00
Gabor Juhos
98b13e39ac generic: ar8216: rename ar8xxx_mib_cleanup to ar8xxx_mib_stop
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35546
2013-02-10 18:42:08 +00:00
Gabor Juhos
f97170a720 generic: ar8216: free mib counters from ar8xxx_free
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35545
2013-02-10 18:42:07 +00:00
Gabor Juhos
7924e517af generic: ar8216: add ar8xxx_free helper
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35544
2013-02-10 18:42:05 +00:00
Gabor Juhos
77b3c551c4 generic: ar8216: add ar8xxx_create{,mii} helpers
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35543
2013-02-10 18:42:04 +00:00
Gabor Juhos
5f70b1db2a generic: ar8216: remove redundant phy address check
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35542
2013-02-10 18:38:12 +00:00
Gabor Juhos
14fd37258b generic: ar8216: only set phy_ptr if packet mangling is used
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35541
2013-02-10 18:38:10 +00:00
Gabor Juhos
393163b098 generic: ar8216: add defines for the AR8316 POSTRIP register
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35539
2013-02-10 13:18:48 +00:00
Gabor Juhos
5ed480598d generic: ar8216: don't probe the chip multiple times
It is only needed when the private data is allocated.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35538
2013-02-10 13:05:15 +00:00
Gabor Juhos
774da6c7a4 generic: ar8216: add sanity check to ar8216_probe
Verify that the mdio bus has PHY devices with
a supported PHY ID at address 0-4.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35537
2013-02-10 13:05:14 +00:00
Gabor Juhos
4720c75cf7 generic: ar8216: skip probe on unused PHY addresses
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35536
2013-02-10 13:05:12 +00:00
Jonas Gorski
f07a33afc2 ar71xx: register the micro sd card reader on RB493G
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35535
2013-02-10 12:31:38 +00:00
Jonas Gorski
eedc3554fe generic: b53: fix reverted error check in probe
b53_switch_detect returns value returned by b53_read8, which is 0 for
success. So fail (and return error) only if b53_switch_detect returned
something else than 0. This fixes supported and advertising being zeros
for MDIO access.

Cc: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 35534
2013-02-10 12:31:36 +00:00