Commit graph

559 commits

Author SHA1 Message Date
Gabor Juhos
bb0785880a ramips: Rename POC registers
Rename POC registers.

The current code uses POC1-POC3.

The datasheet uses:
POC1: Port Control 0
POC1: Port Control 1
POC2: Port Control 2

So the first POC1 is a typo that should have been POC0, rename the
registers to POC0-POC2 accordingly.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33302
2012-08-29 10:37:41 +00:00
Gabor Juhos
f1b9d77912 ramips: Minor ramips_esw.c cleanup
Stop handling VLAN setup in the kernel.
Removes the obsolete RT305X_ESW_VLAN_CONFIG_BYPASS option I added for
WL-351 and add some extra comments.
Also removes the en_vlan per-port flag that isn't very useful really, it now
is only controlled by the global enable_vlan flag.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33301
2012-08-29 10:37:40 +00:00
Gabor Juhos
1f3400d3b4 ramips: Add switch setup to uci network defaults
Add switch setup to uci network defaults.

The 'lan' attribute is used to decide into which vlan to put the
port.
Currently 'disable' is never set, but the intention is to use this
for devices like the 8devices Carambola, which only has two ports
hooked up to the SoC.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33300
2012-08-29 10:37:38 +00:00
Gabor Juhos
3b17f1deb8 ramips: Add swconfig support to ramips_esw.c
Add swconfig support to ramips_esw.c

This patch adds swconfig support for ramips_esw:

Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external
rtl8366rb on internal port 5).
I've made sure that in the enable_vlan=0 case it behaves like a dumb
switch, so external switches should work fine with vlans and
verified this on the WL-351.

The current state shown by swconfig is always read directly from HW
registers, new settings only show after 'swconfig dev rt305x set apply'.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33299
2012-08-29 10:37:36 +00:00
Gabor Juhos
358c7e47f2 ramips: ramips_esw.c indentation cleanup
Minor indentation cleanup.

Prepare for the main swconfig patch by cleaning up indentation a bit.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33298
2012-08-29 10:37:35 +00:00
Gabor Juhos
cebaa557be ramips: fix board parameter for the NBG-419N (#12061)
SVN-Revision: 33229
2012-08-22 17:55:12 +00:00
Gabor Juhos
eb54a05e89 ramips: add profile for Allnet devices
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33225
2012-08-22 12:36:35 +00:00
Gabor Juhos
d77418d67e ramips: add RSSI leds for uci-defaults for ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33220
2012-08-22 09:46:30 +00:00
Gabor Juhos
67e6461ad7 ramips: add board alias for the ALL0239-3G
Generate image for the ALL0239-3G which can be flashed through the
chipset-vendor SDK based firmware's web-interface and bootloader.

The bootloader seems to ignore uImage checksum errors, but does complain about
them once the 0xDEADC0DE was replaced by an actual JFFS2 page.

I'm working on implementing fixtrx for uImage in the mtd package to solve this.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33206
2012-08-17 17:56:07 +00:00
Gabor Juhos
89606b61b1 ramips: add support for D-Link DIR-615 H1
rt2x00 still needs some patching as the radio doesn't come to life.
Installation via webflash.

[juhosg: fix whitespace issues, remove rt305x_register_usb
from machine setup because the board has no USB port]

Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi>

SVN-Revision: 33205
2012-08-17 17:56:05 +00:00
Gabor Juhos
82759a1716 ramips: rename rt3352 usb platform devices
In order to get OHCI/EHCI working on the Rt3352, the platform device must be
named so rt3883-?hci will recognize it.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33145
2012-08-12 12:48:31 +00:00
Gabor Juhos
1525620b0e ramips: watchdog: use maximum possible timeout by default
As the userspace has no means to determine the maximum possible timeout, use
that as the default and let the userspace lower it when necessary.

As the result the usual OpenWrt install (with busybox's watchdog trying to set
the timeout to 60s on start) is using a 33s timeout on an RT3052 clocked at
384MHz instead of the current 20s default.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33144
2012-08-12 12:48:28 +00:00
Gabor Juhos
615a619bc7 ramips: provide means to specify custom "image name" for uImages, use for DIR-620
D-Link's DIR-620 allows to flash a uImage directly from its web-interface but
for that the image name should be set to DIR_620.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33143
2012-08-12 12:48:26 +00:00
Gabor Juhos
9365113040 ramips: add D-Link DIR-620 A1 support
Full functionality runtime tested, installation via OEM web-interface requires
a follow-up patch.

Thanks go to Sergey Vasilyugin for his patch that pointed me at the missing
bits (including the antiparallel wps led).

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33142
2012-08-12 12:48:24 +00:00
Florian Fainelli
1627b2bb4b move rt305x-dwc driver to target specific modules.mk
SVN-Revision: 32864
2012-07-25 15:50:42 +00:00
John Crispin
5e52619b76 DWC otg usb: compilation fixes and trivial bugfix in slave mode
Signed-of-by: Nikolai Zhubr <n-a-zhubr@yandex.ru>

SVN-Revision: 32823
2012-07-24 20:38:55 +00:00
John Crispin
799d6deab0 D-Link DAP-1350 initial support
The initial support for the D-Link DAP-1350.
USB related functionality is not tested.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32821
2012-07-24 20:38:43 +00:00
John Crispin
03be8d08ac initial LED configuration for Fonera 2.0n
Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips)

Signed-off-by: Malte Forkel <malte.forkel@berlin.de>

SVN-Revision: 32819
2012-07-24 20:38:31 +00:00
John Crispin
2d2479a033 add ALL5002 userspace support
detect EEPROM, MAC addresses and support sysupgrade for the ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32816
2012-07-24 20:38:14 +00:00
John Crispin
e219c3ac3a enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F.
Hope that this works, didn't have a chance to actually test it...

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32815
2012-07-24 20:38:08 +00:00
John Crispin
a65eee9ac3 add image build for ALL5002
add image build for ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32814
2012-07-24 20:38:03 +00:00
John Crispin
0a08a776fb add support for Allnet ALL5002 to kernel
support ALL5002 in ramips/rt305x branch of the kernel.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32813
2012-07-24 20:37:56 +00:00
John Crispin
6641024f50 uart_clk on Rt3352F is always 40MHz
Currently, sys_clk/10 is used which is just wrong.
cpu_clk/10 would work for systems with 400MHz CPU clock.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32812
2012-07-24 20:37:50 +00:00
Gabor Juhos
372945185d ramips: rt305x: add support for Edimax 3G-6200N
Support for Edimax 3G-6200N router with USB.

Signed-off-by: Lukasz Golebiowski <lgolebio@gmail.com>

SVN-Revision: 32682
2012-07-12 13:29:46 +00:00
Vasilis Tsiligiannis
eee358338c ramips: mac address detection for Fonera 2.0n
Detect and apply MAC address of a Fonera 2.0n (ramips)

Signed-off-by: Malte Forkel <malte.forkel@berlin.de>
Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>

SVN-Revision: 32490
2012-06-23 13:58:29 +00:00
Gabor Juhos
833b4af816 ramips: rt305x: add support for the Petatel PSR-680W Wireless CDMA Router
This patch adds support for the Korean made Petatel PSR-680W Wireless CDMA Router.
The platform is based on Ralink RT3052.
http://wiki.openwrt.org/toh/petatel/psr-680w

Signed-off-by: Dmitry Shmygov <shmygov at rambler.ru>

SVN-Revision: 32450
2012-06-19 09:52:15 +00:00
John Crispin
a4d96aae8d bump to 3.3.8
SVN-Revision: 32055
2012-06-05 06:57:51 +00:00
Gabor Juhos
ffbb4f88a9 ramips: use the generic uci-default functions for initial LED setup
SVN-Revision: 31993
2012-05-29 16:39:18 +00:00
Gabor Juhos
c71838faa1 ramips: WAN LED for D-Link DIR-300-B1
Add led devices for D-Link DIR-300-B1 WAN LED.

Note that the GPIO state is also ANDed with the esw switch port 4
LED state, which is why I've set the amber LED to default-on.

Closes: https://dev.openwrt.org/ticket/11326

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

[ juhosg:
- fix comment style in mach-dir-300-revb.c,
- remove the PPP specific LED setup, not everyone uses a PPP connection
  on the WAN interface]

SVN-Revision: 31989
2012-05-29 16:39:03 +00:00
Gabor Juhos
1c552ba8e5 ramips: rt3883: add device registration code for the SPI controller
SVN-Revision: 31922
2012-05-27 17:10:00 +00:00
Gabor Juhos
9c241983fc ramips: allow to use the SPI driver on RT3662/RT3883
SVN-Revision: 31921
2012-05-27 17:09:58 +00:00
Gabor Juhos
78a750dcce ramips: rt3883: fix GPIO reservation for the SPI pins
SVN-Revision: 31920
2012-05-27 17:09:56 +00:00
Gabor Juhos
0622fdd82c ramips: rt305x: remove superfluous controller_data assignment
SVN-Revision: 31919
2012-05-27 17:09:52 +00:00
Gabor Juhos
7f5bec0642 ramips: make rt2x00 firmware extraction quiet
SVN-Revision: 31918
2012-05-27 17:09:50 +00:00
Gabor Juhos
2ae5581447 kernel: update linux 3.3 to 3.3.7
SVN-Revision: 31848
2012-05-23 21:05:32 +00:00
Gabor Juhos
e4720dfa95 ramips: Add byte queue limits support to net/ethernet/ramips_main.c
Add byte queue limits support to net/ethernet/ramips_main.c

"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31844
2012-05-23 21:05:23 +00:00
Gabor Juhos
1d286fd755 ramips: Enable sysupgrade for Sitecom WL-351
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31843
2012-05-23 21:05:22 +00:00
Gabor Juhos
39994008cb linux: move certain disabled symbols to the generic configs
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
2012-05-15 10:58:52 +00:00
Gabor Juhos
b472e5d12e kernel: update linux 3.3 to 3.3.6
SVN-Revision: 31709
2012-05-14 09:18:32 +00:00
Gabor Juhos
34018a630f kernel: update linux 3.3 to 3.3.5
SVN-Revision: 31645
2012-05-07 20:11:43 +00:00
Gabor Juhos
b0449ccf04 ramips: W306R V2.0 - GPIO and Network fixes
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
       removing a line(default is correct), and reversed the
       Lan/wan layout LLLLW to WLLLL.

Added: image/Makefile now builds -factory.bin files. I am
       unsure of the accepted way to change the makefile but
       the name of the image needs to be 'linkn Kernel Image'
       in order to be accepted by the OEM firmware.

Known issue: eth0 (internal switch i think has mac address:
       00:11:22:33:44:55  but i think it should be same as
       the lan).
Known issue: Pressing the reset button has no noticable effect,
       i would expect the router to boot failsafe if being
       pressed on boot, reboot if short press and reset all
       to default if long press.

[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]

Signed-off-by: David Pearce <david_18051985@hotmail.com>

SVN-Revision: 31557
2012-05-02 19:17:59 +00:00
Gabor Juhos
90e99b9fe8 ramips: Make serial console for DIR-300-B1 work again
Make serial console for DIR-300-B1 work again.

With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.

Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31556
2012-05-02 19:17:58 +00:00
Gabor Juhos
cbfce53831 kernel: update linux 3.3 to 3.3.4
SVN-Revision: 31541
2012-04-30 08:38:11 +00:00
Gabor Juhos
8e06682fb7 ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

SVN-Revision: 31507
2012-04-29 07:36:33 +00:00
Jonas Gorski
8fd383ae2e kernel: update linux 3.3 to 3.3.3
SVN-Revision: 31460
2012-04-24 09:25:38 +00:00
Gabor Juhos
1ab80c7817 ramips: rt305x: add support for the UR-336UN board
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

SVN-Revision: 31451
2012-04-23 16:56:06 +00:00
Gabor Juhos
3626444c6d ramips: rt305x: add support for the Asus WL-330N3G board
This patch adds support for the ASUS WL-330N3G

Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led.

The bi-color led is driven by 2 gpio.
I don't know how to handle this, so I simply made 2 leds : one red, one blue.
But the red light takes precedence over the blue one according to the chart below.

r = led is red
b = led is blue
0 = led is off

xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness

initial state	action	 led	gpio state

r0	b0	r0->r1	 r  	r0	b0
r0	b0	b0->b1   b	r0	b1

r1	b0	r1->r0	 0	r0	b0
r1	b0	b0->b1	 r	r1	*b1*

r1	b1	r1->r0   b	r0	b1
r1	b1	b1->b0   r	r1	b0

r0	b1	r0->r1   r	r1	*b1*
r0	b1	b1->b0   0	r0	r0

Signed-off-by: Frédéric Leroy <fredo@starox.org>

SVN-Revision: 31450
2012-04-23 16:56:05 +00:00
Gabor Juhos
5024ffb976 ramips: nuke 3.2 suport
SVN-Revision: 31405
2012-04-21 12:30:53 +00:00
Gabor Juhos
6c8ca78067 ramips: switch to 3.3.2
SVN-Revision: 31404
2012-04-21 12:30:51 +00:00
Gabor Juhos
5c325b0057 ramips: add support for 3.3
SVN-Revision: 31403
2012-04-21 12:30:50 +00:00
Gabor Juhos
7f902c962b ramips: rt305x: add OHCI/EHCI registration code for RT3352
SVN-Revision: 31402
2012-04-21 12:30:48 +00:00
Gabor Juhos
1645928135 ramips: rt305x: fix CPU clock detection on RT3352
SVN-Revision: 31401
2012-04-21 12:30:47 +00:00
Gabor Juhos
fb69e28eaf ramips: rt305x: use different memory size setup for RT3352
SVN-Revision: 31400
2012-04-21 12:30:45 +00:00
Gabor Juhos
818aeba960 ramips: rt3883: add profile and build sysupgrade image for the RT-N56U
SVN-Revision: 31399
2012-04-21 12:30:44 +00:00
Gabor Juhos
6b677e1d22 ramips: add swconfig to the default package list
SVN-Revision: 31398
2012-04-21 12:30:43 +00:00
Gabor Juhos
ced031a0b2 ramips: build initramfs image for the Fonera 2.0N
SVN-Revision: 31397
2012-04-21 12:30:42 +00:00
Gabor Juhos
fc88a363c0 ramips: rt305x: add initial support for Tenda W306R V2.0
More device info at: http://wiki.openwrt.org/toh/tenda/w306r

Signed-off-by: David Pearce <David_18051985@hotmail.com.au>
[juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages
from the profile, change broken GPIO number]

SVN-Revision: 31396
2012-04-21 12:30:40 +00:00
Gabor Juhos
88b5827c52 ramips: remove hardcoded console parameter from kernel configs
SVN-Revision: 31395
2012-04-21 12:30:30 +00:00
Jonas Gorski
a8f2bc682e kernel: also update the targets to use 3.2.15
Thanks Gabor for spotting it.

SVN-Revision: 31337
2012-04-17 13:12:14 +00:00
Jonas Gorski
16b4cbcdd6 kernel: update linux 3.2 to 3.2.14
SVN-Revision: 31222
2012-04-09 14:48:51 +00:00
Jonas Gorski
d87efd8c3c kernel: update linux 3.2 to 3.2.13 and refresh patches
Also remove a duplicate patch from lantiq (already in generic).

SVN-Revision: 31158
2012-04-01 07:56:55 +00:00
Jo-Philipp Wich
e9c4d3d1f2 ramips: add support for the ARC FreeStation5 board, also fix WCR-150GN network setup while we're at it - thanks Pau Escrich <p4u@dabax.net> for the implementation
SVN-Revision: 31144
2012-03-29 16:03:04 +00:00
Gabor Juhos
d495277d9f ramips: rt305x: build image for the DIR-615 rev D boards
Patch from #10105.

SVN-Revision: 31101
2012-03-27 19:29:59 +00:00
Gabor Juhos
e4e24c5512 ramips: rt305x: add add support for the Asus WL-330N board
[juhosg: reorder several lines in order to keep things sorted
alphabetically]

Signed-off-by: Frédéric Leroy <fredo@starox.org>

SVN-Revision: 31100
2012-03-27 19:29:57 +00:00
Gabor Juhos
c1dc6df8bd kernel: update linux 3.2 to 3.2.12
SVN-Revision: 31028
2012-03-19 18:23:31 +00:00
Gabor Juhos
18f7081e17 ramips: rt305x: add profile for the AZtech HW-5503G board
Patch from #11085.

SVN-Revision: 30907
2012-03-12 17:29:06 +00:00
Gabor Juhos
0f77d0b2ba ramips: add RT3350 detection
SVN-Revision: 30900
2012-03-12 16:12:13 +00:00
Gabor Juhos
05d3f559f5 ramips: rt305x: rewrite SoC detection
SVN-Revision: 30890
2012-03-11 19:05:59 +00:00
Gabor Juhos
8cf8ee8f9d ramips: rt305x: rename SYSTEM_CONFIG_* defines to RT305X_SYSCFG_*
SVN-Revision: 30889
2012-03-11 19:05:57 +00:00
Gabor Juhos
acb4ad86e5 ramips: replace RALINK_SOC_* macros with global variables
SVN-Revision: 30888
2012-03-11 19:05:56 +00:00
Gabor Juhos
8cff770eb3 ramips: introduce ramips_soc_prom_init and move SoC detection into that
SVN-Revision: 30887
2012-03-11 19:05:53 +00:00
Gabor Juhos
6c51c47962 ramips: build initramfs image for DIR-{3,6}00 boards
SVN-Revision: 30882
2012-03-11 16:39:31 +00:00
Gabor Juhos
4e15457e0e ramips: allow to use DSP ASE on RT3xxx
SVN-Revision: 30879
2012-03-11 16:39:26 +00:00
Gabor Juhos
0e486d2fd2 ramips: add support for unbranded XDX-RN502J board
This patch adds support for routers using a PCB marked XDX-RN502J
V2.0, such as some unbranded routers like this:

http://www.mediafire.com/?8acv87h6snn9fj6
http://www.mediafire.com/?do7xonw7scor4kn
http://www.mediafire.com/?1ad49zvx3e7jyix
http://www.mediafire.com/?i46cqiq66maa197

http://www.aliexpress.com/product-fm/516397994-Free-Shipping-300M-3G-WAN-Wireless-N-WiFi-USB-AP-Router-2-Antennas-wholesalers.html

some reports also state the Aceex 22Y uses the same board.

more information can be found in the following openwrt forum post
https://forum.openwrt.org/viewtopic.php?id=34878

[juhosg: fix checkpatch warnings, use the GENERIC_4M template]

Signed-off-by: bruno schwander <bruno@tinkerbox.org>

SVN-Revision: 30809
2012-03-04 16:09:13 +00:00
Gabor Juhos
44c8b396f9 ramips: board support for Asus RT-N10+
[juhosg: fix indentation in platform scripts, and remove debug
messages from 06_set_iface_mac]

Signed-off-by: Patrick van Staveren <trick@vanstaveren.us>

SVN-Revision: 30808
2012-03-04 16:09:11 +00:00
Gabor Juhos
9698a499b6 kernel: update linux 3.2 to 3.2.9
SVN-Revision: 30767
2012-03-01 19:49:02 +00:00
Gabor Juhos
72599f0c61 ramips: don't read RAMIPS_RX_CALC_IDX0 register in the loop
SVN-Revision: 30733
2012-02-26 10:54:13 +00:00
Gabor Juhos
100f76a010 ramips: raeth: add rx_info structure
This helps to reduce code size on RX path:

add/remove: 0/0 grow/shrink: 3/1 up/down: 68/-56 (12)
function                                     old     new   delta
ramips_eth_open                             1104    1144     +40
ramips_ring_free                             212     232     +20
ramips_eth_stop                              400     408      +8
ramips_eth_rx_hw                             648     592     -56

SVN-Revision: 30732
2012-02-26 10:54:12 +00:00
Gabor Juhos
32e7b1c7d9 ramips: raeth: add tx_info structure
This helps to reduce code size on TX path:

add/remove: 0/0 grow/shrink: 1/4 up/down: 56/-92 (-36)
function                                     old     new   delta
ramips_eth_open                             1048    1104     +56
ramips_eth_tx_housekeeping                   156     148      -8
ramips_ring_free                             224     212     -12
ramips_eth_stop                              420     400     -20
ramips_eth_hard_start_xmit                   480     428     -52

SVN-Revision: 30731
2012-02-26 10:54:10 +00:00
Gabor Juhos
30143b715c ramips: raeth: don't process disabled interrupts
Also rename the 'fe_int' variable.

SVN-Revision: 30713
2012-02-25 11:59:19 +00:00
Gabor Juhos
6990f66861 ramips: fix FONERA20N image generation
SVN-Revision: 30710
2012-02-24 16:18:46 +00:00
Gabor Juhos
9afeeae65e ramips: image: increase minimum kernel partition size to 896k
SVN-Revision: 30706
2012-02-23 19:58:16 +00:00
Gabor Juhos
7089b5213e ramips: image: cleanup and sort templates/profiles
SVN-Revision: 30705
2012-02-23 19:58:15 +00:00
Gabor Juhos
c8718a220b ramips: image: use GENERIC_4M template for the ALL0256N board
SVN-Revision: 30704
2012-02-23 19:58:14 +00:00
Gabor Juhos
507c7d30f5 ramips: image: introduce mkmtd/{,phys,spi} helpers
SVN-Revision: 30703
2012-02-23 19:58:12 +00:00
Gabor Juhos
5f63ea18aa ramips: image: pass mtdlayout variables by value
SVN-Revision: 30702
2012-02-23 19:58:11 +00:00
Gabor Juhos
49e53c06b9 ramips: image: merge F5D8235V{1,2} templates
SVN-Revision: 30701
2012-02-23 19:58:10 +00:00
Gabor Juhos
00e7277a4c ramips: image: use generic template for the WR6202, OMNIEMB, W502U boards
SVN-Revision: 30700
2012-02-23 19:58:07 +00:00
Gabor Juhos
554010d55b ramips: image: introduce mkcmdline helper
SVN-Revision: 30699
2012-02-23 19:58:06 +00:00
Gabor Juhos
32c6d63acf ramips: image: use the GENERIC_4M template for the V11ST-FE board
SVN-Revision: 30698
2012-02-23 19:58:04 +00:00
Gabor Juhos
ab65053cf0 ramips: image: simplify Makefile a bit
SVN-Revision: 30697
2012-02-23 19:58:03 +00:00
Gabor Juhos
9017fce3a2 ramips: image: add MkImageLzma wrapper
SVN-Revision: 30696
2012-02-23 19:58:02 +00:00
Gabor Juhos
c9d8f471fc ramips: image: allow to build board specific initramfs images
SVN-Revision: 30695
2012-02-23 19:58:01 +00:00
Gabor Juhos
c0974b46a5 ramips: merge identical switch configuration entries
SVN-Revision: 30688
2012-02-22 19:46:19 +00:00
Gabor Juhos
a9101a144c ramips: use unified switch identifiers in uci-defaults/network
SVN-Revision: 30687
2012-02-22 19:46:17 +00:00
Gabor Juhos
b6522f372f ramips: fix VLAN config of the RT-N15
SVN-Revision: 30686
2012-02-22 19:46:15 +00:00
Gabor Juhos
a18a821733 ramips: raeth: show interrupt statistics in debugfs
SVN-Revision: 30681
2012-02-22 13:06:44 +00:00
Gabor Juhos
214216c04d ramips: raeth: add debugfs support
SVN-Revision: 30680
2012-02-22 13:06:42 +00:00
Gabor Juhos
c1e4d709fa ramips: raeth: rename main source file
SVN-Revision: 30679
2012-02-22 13:06:41 +00:00
Gabor Juhos
5e6bc97d0c ramips: raeth: add missing Kconfig and Makefile
SVN-Revision: 30671
2012-02-21 09:44:30 +00:00