Commit graph

28830 commits

Author SHA1 Message Date
John Crispin
7350373657 octeon: remove kmod-ath9k from default packages
Looks like the targets are Ubiquiti routers which don't come with any wireless cards.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 42810
2014-10-06 20:05:52 +00:00
John Crispin
90cbc9a04f octeon: prepare elf kernel image and md5sum for usb copying
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 42809
2014-10-06 20:05:39 +00:00
John Crispin
3ff9c76e9e octeon: fix serial console for 3.14 kernel
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 42808
2014-10-06 20:05:29 +00:00
John Crispin
97c202968a ralink: various i2c fixes
the driver did not handle all states correctly causing a deadlock of the i2c hw block.

Signed-off-by: Ing.Michele Mogioni <michele.mogioni@unimc.it>

SVN-Revision: 42807
2014-10-06 20:05:13 +00:00
Rafał Miłecki
d30e92884e kernel: add some warnings to the old (built-in) rootfs splitter
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42806
2014-10-06 15:07:54 +00:00
Rafał Miłecki
a58a4bb580 kernel: enable CONFIG_MTD_SPLIT_SQUASHFS_ROOT
This enables dedicated "rootfs" splitter by default. We still keep
CONFIG_MTD_SPLIT_SQUASHFS_ROOT, so the old (built-in) splitter will be
used as a fallback in case of problems.
Once we decide the dedicated partitioner works stable, we should remove
the old one completely.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42805
2014-10-06 14:02:06 +00:00
Rafał Miłecki
b87ff2cae7 kernel: allow rootfs splitters to work without CONFIG_MTD_ROOTFS_SPLIT
We want to remove that old (built-in) splitter at some point.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42804
2014-10-06 13:49:11 +00:00
Steven Barth
8691d75917 odhcp6c: add route-workaround for broken IPv6-ISPs
Some ISP seem to only do stateful DHCPv6 and not sending RAs.
This is technically broken because plain DHCPv6 doesn't carry routes.

We work around here by faking a default route to the DHCPv6 server
if we do not receive a useful RA from the ISP.

This workaround can be turned off with: option fakeroutes 0

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42803
2014-10-06 11:19:33 +00:00
Steven Barth
8243e57167 nftables: bump to 2014-09-30, disable gmp
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42802
2014-10-06 06:24:53 +00:00
John Crispin
f9cccd2c14 base-files: make postinst script run inside a subshell
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42800
2014-10-06 05:55:35 +00:00
Steven Barth
e263cd27ee libnftnl: bump to 2014-10-02
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42799
2014-10-06 05:30:36 +00:00
John Crispin
36faa5b145 lantiq: led name has changed from adsl -> dsl
make the notify script aware of this.

https://dev.openwrt.org/ticket/18005

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42798
2014-10-06 05:18:52 +00:00
John Crispin
e77ae183a1 ar71xx: correctly detect hardware revision on TP-LINK Archer C5 and C7
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 42797
2014-10-06 04:53:34 +00:00
John Crispin
7f772910a1 ar71xx: fix syntax for TP-LINK TL-WR941N/ND / Rosewill RNX-N360RT detection
[ ] conditions should use = instead of == for string equality.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 42796
2014-10-06 04:53:25 +00:00
John Crispin
05777fb947 ar71xx: simplify TP-LINK model detection
All TP-LINK machine names begin with "TP-LINK", so there's no need to check for
more specific model names. This also allows adding new models like the Archer
series more easily.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 42795
2014-10-06 04:53:20 +00:00
John Crispin
c22bebf6ab Fix build when TAR_OPTIONS env variable is set
The build system sets a make variable TAR_OPTIONS to the unpacking
command, i.e. "-xf -". Now if an environment variable with the same
name is set, the make variable is automatically exported to the
environment. The make variable is added to the tar command in the
makefile, and tar adds the environment variable. This results in a
command like "tar -c /some/dir -xf - -xf -" which of course doesn't
work. It is also difficult to spot as the second "-xf -" is not
visible on the command line.
I suggest this is fixed by unexporting TAR_OPTIONS as I see no use
of the evironment variable, and it is changed from the original
value anyway.

Signed-off-by: Jan Kardell <jan.kardell@telliq.com>

SVN-Revision: 42794
2014-10-06 04:53:14 +00:00
John Crispin
74397a14ca iwinfo: add AR9580 with new subsystem device ID and QCA9880 with no subsystem vendor/device IDs
The AR9580 with the new ID can be found in the EnGenius ESR900 and the
QCA9880 without any subsystem IDs can be found in the EnGenius ESR1750.

Signed-off-by: Forest Crossman <cyrozap@gmail.com>

SVN-Revision: 42793
2014-10-06 04:53:04 +00:00
John Crispin
73acd5050f ar71xx: add support for TP-LINK TL-WR847N v8 (clone of TL-WR841N/ND v8)
Signed-off-by: Jaehoon You <teslamint@gmail.com>

SVN-Revision: 42792
2014-10-06 04:52:57 +00:00
John Crispin
9f08790436 kernel: add rtc-ds1307 module support
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 42791
2014-10-06 04:52:51 +00:00
John Crispin
fcbad42acd kernel: add ledtrig-transient module support
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 42790
2014-10-06 04:52:44 +00:00
John Crispin
d76b7e0221 ramips: D-Link DIR-810L: make led naming consistent with other boards
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 42789
2014-10-06 04:52:36 +00:00
John Crispin
98114e7cdd ralink: Add missing code to free GPIO on Ralink SoC
Signed-off-by: schildt@ibr.cs.tu-bs.de
Acked-by: info@gerhard-bertelsmann.de

SVN-Revision: 42788
2014-10-06 04:52:26 +00:00
John Crispin
70d56d749b hostapd: read missing parameter for dynamic VLANs
In r41872 Dynamic VLAN support was reintroduced, but the vlan_naming
parameter is not read while setting up the config, so it always
defaults to 1.

Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>

SVN-Revision: 42787
2014-10-06 04:52:21 +00:00
John Crispin
491e028e2d ar71xx: add LED defaults for the EnGenius ESR1750
Signed-off-by: Forest Crossman <cyrozap@gmail.com>

SVN-Revision: 42786
2014-10-06 04:52:13 +00:00
John Crispin
b04bb3eea7 ramips: Support for RAMIPS based Tripmate HT-TM02 board
Provides support for the Tripmate HT-TM02 personal router including LEDs and
reset button. “Mode” switch is not supported. New profile includes full set
of packages required to enable LEDs, USB, and LUCI. Patches were applied
against trunk snapshot r42649. Functionality has been tested in AP, basic wifi
client, wifi router, and routed client modes - all good.

Signed-off-by: Ron Curry <wingspinner@gmail.com>

SVN-Revision: 42785
2014-10-06 04:52:07 +00:00
John Crispin
7ab5357280 firmware-utils: add NEXX factory image support
This patch adds support to encode and decode images for certain types of
NEXX routers.

SVN-Revision: 42784
2014-10-06 04:52:01 +00:00
John Crispin
7860c9707a sysupgrade: preserve symlinks in backups
Signed-off-by: Catalin Patulea <catalinp@google.com>

SVN-Revision: 42783
2014-10-06 04:51:56 +00:00
John Crispin
e2c3c2280c ar71xx: fix reset button gpio for OM2P/OM2P-HS
A typo in the definition for the OM2P reset button disabled its functionality
in OpenWrt. The actual button for these two devices is "1" and not "11".

Signed-off-by: Oren Poleg <oren@poleg.org>
[sven@open-mesh.org: added a commit subject+message]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 42782
2014-10-06 04:51:51 +00:00
Felix Fietkau
b0ef5e66fa build: remove useless quote stripping for KERNELNAME, add fallback for it in the kernel build command line
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42781
2014-10-05 20:17:23 +00:00
Felix Fietkau
f35da063bc targets: remove useless quotes around KERNELNAME
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42780
2014-10-05 20:17:19 +00:00
Felix Fietkau
8a450a93a5 lantiq: remove the useless ltqtapi.mk include file
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42778
2014-10-05 18:58:47 +00:00
Felix Fietkau
b6fb77ebfe gcc: remove version 4.8.0
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42777
2014-10-05 18:40:43 +00:00
Felix Fietkau
c7bc3ad908 binutils: remove old versions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42776
2014-10-05 18:40:38 +00:00
Zoltan Herpai
fbbce1c8d8 sunxi: re-add rootfs build when no profile is set, fixes #17980, thanks.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42775
2014-10-05 17:32:36 +00:00
Felix Fietkau
5121981a9e iproute2: add conflict for ip with ip-full
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42774
2014-10-05 17:13:34 +00:00
Felix Fietkau
a402b5c48d build: make sure modules are modposted after initramfs image is built
Otherwise the modpost steps for individual modules that are compiled
manually (using make package/<name_of_module>/install) will give warning
of missing symbols when that module depends other modules.

This is caused by the Module.symvers file not containing any symbols
anymore of external modules when the initramfs image is built without
specifically giving the modules target.

Signed-off-by: Tjalling Hattink <t.hattink@fugro.nl>

SVN-Revision: 42773
2014-10-05 16:58:16 +00:00
Felix Fietkau
bf0305725a hostapd: add conflicts with wpad(-mini) to hostapd and wpa_supplicant
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42772
2014-10-05 16:41:50 +00:00
Felix Fietkau
c6ebce701e build: propagate package conflicts to opkg metadata
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42771
2014-10-05 16:41:38 +00:00
Felix Fietkau
5e4789671a build: add support for declaring package CONFLICTS which only affect selecting built-in packages
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42770
2014-10-05 16:41:33 +00:00
Felix Fietkau
646dfde826 Fix broken implementation of NOEXECSTACK flag for MIPS architectures for gcc-linaro-4.8
This patch ensures that libgcc_s.so properly honours the NOEXECSTACK flag
for MIPS builds, when gcc-linaro-4.8 or 4.9 is the chosen C compiler.

Signed-off-by: Andrew McDonnell <bugs@andrewmcdonnell.net>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42769
2014-10-05 15:21:30 +00:00
Felix Fietkau
8cc9f46dfa ath10k: update firmware to the latest version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42768
2014-10-05 14:59:59 +00:00
Felix Fietkau
749d865aa4 gcc: gcc 4.9.x disable libsanitize
gcc 4.9.x enables building of libsanitize

- libsanitize needs some headers that are not available
  in uclibc (netrom/netrom.h)

according to buildroot project:
- build fail with musl
- need wordexp with uclibc which increases uclibc size
http://git.buildroot.net/buildroot/commit/?id=5f4d658d888b539de9a6247ae5b1a0999de5d4ec
http://git.buildroot.net/buildroot/commit/?id=554e29e267e6b36a0fd78c82cbad2c82d939eb7f

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 42767
2014-10-05 14:59:45 +00:00
Felix Fietkau
063074cf0c mac80211_hwsim: select 802.11n support for hostapd
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42766
2014-10-05 11:50:42 +00:00
Felix Fietkau
62e6e788dd relayd: update to the latest version, fixes a build error with the new gcc (#18010)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42765
2014-10-05 11:01:49 +00:00
Felix Fietkau
281f40cef2 hostapd: allow using iapp for any encryption type (fixes #18022)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42764
2014-10-05 10:55:55 +00:00
Felix Fietkau
cd80931e03 hostapd: merge an upstream patch for pmksa cache
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42762
2014-10-05 10:26:26 +00:00
Felix Fietkau
b5529ed26b iwinfo: detect AC PHY for broadcom-wl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42761
2014-10-05 10:26:17 +00:00
Felix Fietkau
dac05f6724 iwinfo: detect HT PHY for broadcom-wl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42760
2014-10-05 10:26:10 +00:00
Felix Fietkau
349b20c197 iwinfo: fix handling of accessing nl80211 interfaces via radio*
look up device path via uci instead of assuming a direct phy index

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42759
2014-10-05 10:26:05 +00:00
Felix Fietkau
0e439d8a2a iwinfo: enable nl80211 support based on cfg80211, not mac80211
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42758
2014-10-05 10:25:55 +00:00