Commit graph

13594 commits

Author SHA1 Message Date
Rafał Miłecki
917fb76321 brcm47xx: rename (and refresh) MTD patch for safety "nvram" partition
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44854
2015-03-17 07:07:00 +00:00
Rafał Miłecki
8f63c1405f brcm47xx: switch to 3.18
Tested on BCM5357B0, BCM47186B0 and BCM4706.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44853
2015-03-16 23:05:43 +00:00
Rafał Miłecki
7c6f7b716b bcm53xx: switch to 3.18
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44852
2015-03-16 22:24:56 +00:00
Felix Fietkau
768cf6821f x86: refresh kvm_guest kernel config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44851
2015-03-16 21:17:45 +00:00
Felix Fietkau
06cb90f8a2 kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44850
2015-03-16 21:17:41 +00:00
Felix Fietkau
6c42f140a0 x86: enable rtl8139 ethernet support for geode by default
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44849
2015-03-16 21:00:14 +00:00
Florian Fainelli
1488ed7c2c brcm63xx: switch maintainer
Make Jonas the maintainer of brcm63xx.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 44848
2015-03-16 19:51:17 +00:00
Felix Fietkau
2777b525c6 geode: set target to Geode GX1 to support older chips
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44847
2015-03-16 18:10:17 +00:00
Jonas Gorski
343ec8d645 brcm63xx: use consistent gpio chip labeling for OF/non-OF
Ensure gpio chips are always labeled the same; this allows simplifying
any arch setup gpio lookups.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44846
2015-03-16 13:37:38 +00:00
Jonas Gorski
81e51681e7 brcm63xx: switch to 3.18
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44841
2015-03-16 11:53:22 +00:00
Jonas Gorski
5d0e2d1b41 brcm63xx: call brcm63xx_detect explicitly
Now that we have converted all users of global variables to use
brcm63xx_board_name, we can savely convert the implicit call to detect
in brcm63xx.sh to a single, explicit call in preinit.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44840
2015-03-16 11:53:14 +00:00
Jonas Gorski
020e5733f9 brcm63xx: move preinit ifname detection to the preinit script
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44839
2015-03-16 11:53:06 +00:00
Jonas Gorski
90da308e3b brcm63xx: remove obsolete brcm63xx_has_reset_button
r37000 made button kmods loaded from generic code, so we don't use
it anymore for deciding to load them.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44838
2015-03-16 11:52:57 +00:00
Jonas Gorski
f0badcb769 brcm63xx: set status leds from within diag.sh
Instead of setting them up on invocation of brcm63xx_detect, set them
when calling diag.sh based.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44837
2015-03-16 11:52:49 +00:00
Jonas Gorski
098377af25 brcm63xx: switch to board_name based configuration
Board IDs are not unique, so in preparation for depricating them, always
use board_name for any (default) configuration decisions.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44836
2015-03-16 11:52:42 +00:00
Jonas Gorski
52ffc6faa7 brcm63xx: add missing board_ids to legacy_detect
These boards do not have a corresponding dts file yet.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44835
2015-03-16 11:52:35 +00:00
Jonas Gorski
906c9ef952 brcm63xx: add device tree based board detection
Use the device tree model property for detecting the board instead
of board id from nvram if present.

Since we can now directly detect the DVA-G3810BN, we can remove the
extra check for it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44834
2015-03-16 11:52:26 +00:00
Jonas Gorski
844e92e188 brcm63xx: populate /tmp/sysinfo
Take full board name from devicetree, if present. Provide a method
for retrieving the board name.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44833
2015-03-16 11:52:20 +00:00
Jonas Gorski
9c53e344c0 brcm63xx: base-files: rename board_name to board_id
Rename board_name to board_id to prepare for using board_name as a
proper name for the board.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44832
2015-03-16 11:52:16 +00:00
Jonas Gorski
ca7f6d28c8 brcm63xx: Add DGND3700 v1 / DGND3800B support
This adds support for the Netgear DGND3700 v1 and DGND3800B.

DGND3700 v1 and DGND3800B are exactly the same router, only one difference,
the factory firmware. This patch produces two factory firmwares for each router.

The router includes an onboard NAND flash for extra storage. NAND is currently
not supported in bcm63xx, so no code added for this part. The NOR flash (32MB)
is enough for storing an openwrt firmware.

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: Add back commit message from v1]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44831
2015-03-16 11:52:10 +00:00
John Crispin
4fdb66373f netlogic: bump to 3.18
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44829
2015-03-16 10:58:43 +00:00
Felix Fietkau
298d67ec7b mvebu: drop linux 3.14 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44828
2015-03-16 08:29:42 +00:00
John Crispin
d6b3eba475 kernel: add missing MTD_SPLIT_FIT_FW symbol
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44827
2015-03-16 08:05:42 +00:00
John Crispin
c0a15a57bd sunxi: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44824
2015-03-16 07:41:24 +00:00
John Crispin
eb396d6569 adm5120: drop 3.8 and 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44823
2015-03-16 07:41:19 +00:00
John Crispin
46f01fec7f ar7: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44822
2015-03-16 07:41:10 +00:00
John Crispin
4d11bb0d23 ixp4xx: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44821
2015-03-16 07:41:05 +00:00
John Crispin
cc8b6c6d5b octeon: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44820
2015-03-16 07:40:59 +00:00
John Crispin
a992489e4b oxnas: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44819
2015-03-16 07:40:54 +00:00
John Crispin
fe33c185bd mpc85xx: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44818
2015-03-16 07:40:47 +00:00
John Crispin
518d9fd2a0 cns3xxx: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44817
2015-03-16 07:40:41 +00:00
John Crispin
43c66cb434 au1000: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44816
2015-03-16 07:40:19 +00:00
John Crispin
fb78ebb813 ar71xx: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44815
2015-03-16 07:40:09 +00:00
John Crispin
de04a1d843 realview: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44814
2015-03-16 07:40:02 +00:00
John Crispin
54f1c710db malta: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44813
2015-03-16 07:39:57 +00:00
John Crispin
257671615b lantiq: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44812
2015-03-16 07:39:52 +00:00
John Crispin
7648d80c90 ralink: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44811
2015-03-16 07:39:46 +00:00
Felix Fietkau
f2f8f6974b x86: refresh kernel patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44810
2015-03-16 07:12:31 +00:00
Felix Fietkau
9e0759ea26 x86: merge all geode based subtargets into one
Build all geode platform drivers into the kernel
Remove kmod-* packages for these drivers

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44809
2015-03-16 07:05:30 +00:00
Felix Fietkau
986b8baf9a x86: remove 3.14 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44805
2015-03-16 05:57:04 +00:00
Felix Fietkau
7f7e0a21b8 kernel: remove linux 3.13 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44804
2015-03-16 05:52:02 +00:00
Felix Fietkau
f26bb532cf omap: remove old kernel versions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44803
2015-03-16 05:51:56 +00:00
Felix Fietkau
495404e9a4 omap: update to linux 3.18, it has been tested by at least one builder and 3.13 has not been built by buildbot in a long time
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44802
2015-03-16 05:51:52 +00:00
Felix Fietkau
c75c90edf6 kernel: port missing ubi EOF marker support patch to 3.19 and 4.0
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44801
2015-03-16 05:16:14 +00:00
Felix Fietkau
adb6d8f93f kernel: fix duplicate use of patch number 490
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44800
2015-03-16 05:16:07 +00:00
Felix Fietkau
d6fbb77bc8 kernel: add a few missing config symbols for 3.18+
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44799
2015-03-16 04:47:28 +00:00
Felix Fietkau
d5b99a2d74 kernel: add missing description for GRO optimization patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44798
2015-03-16 04:19:09 +00:00
Felix Fietkau
270bc6427b kernel: skip GRO for packets bridged to other hosts
Eliminates excessive skb copying when bridging from LAN to WLAN on
ramips.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44797
2015-03-15 20:32:09 +00:00
John Crispin
7ea781558f ar71xx: fix TP-LINK TL-WDR3600/4300 RFKILL switch positions
While the switch positions aren't explicitly labeled as on and off, we've heard
complaints about them being wrong. This patch changes the handling to match the
stock firmware.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 44795
2015-03-15 19:39:47 +00:00
John Crispin
7f3013a480 ipq806x: fix AP148 boot from NOR
This patch allows AP148 to boot from NOR flash.

As we're using a FIT image as kernel (which includes kernel bin + DTB)
we enable the MTD_SPLIT_FIT_FW kernel option, which will detect the FIT
image and automatically split the "firmware" partition into 2 MTD parts
(kernel + rootfs).

The rootfs will then be parsed and split between rootfs + rootfs_data,
as usual.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44794
2015-03-15 19:39:41 +00:00
John Crispin
582232cd7b ipq806x: add ap148 bootargs to DT
Only one bootargs is really needed: the tty port. All the other
information will use the OpenWrt mechanisms.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44793
2015-03-15 19:39:33 +00:00
John Crispin
9a863f803e kernel: mtdsplit: add support for FIT image
If this option is enabled, the FIT image format will be detected and
split by the mtdsplit code. Detection is based upon the FDT magic, which
will trigger the parsing and detection of the rootfs, ending-up in the
creation of the 2 new partitions.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44792
2015-03-15 19:39:27 +00:00
John Crispin
5ca2ad1063 Fix (invert/revert) Hornet-UB WPS LED state
My previous patch regarding the Hornet-UB board
(commit: beed4d82d6a0154b0cd5f7b84e2180215ace6718) actually
causes the WPS led state to be inverted. Practically this meant
that value 0 in /sys/class/led/alfa:blue:wps/brightness would
turn the LED on and any positive value (1-255) would turn it off.

The above of course is confusing and hence reverting this value
back to the way it was before beed4d82d6a0154b0cd5f7b84e2180215ace6718.

Signed-off-by: Janne Cederberg <janne.cederberg@gmail.com>

SVN-Revision: 44791
2015-03-15 19:25:48 +00:00
Jonas Gorski
085b8e0014 b53: global config is part of the management page, not the control page
It will now actually enable the mib counters instead of enabling rx/tx for
the first switch port.

Reported-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44788
2015-03-15 14:19:28 +00:00
Jonas Gorski
eed031d460 brcm63xx: brcm63xxpart: fix buffer overrun in of parser
We never account for the added partitions from the tag parser, so
allocated two partioness less than needed. This can cause issues when
the memory gets reused before the mtd code can actually add the
partitions.

Fixes oopses like:
[    0.920000] mtd: device 2 (rootfs) set to be root filesystem
[    0.924000] 1 squashfs-split partitions found on MTD device rootfs
[    0.932000] 0x0000002e0000-0x0000003f0000 : "rootfs_data"
[    0.940000] 0x000000010000-0x0000003f0000 : "linux"
[    0.948000] CPU 0 Unable to handle kernel paging request at virtual address 00010203, epc == 8028ddf8, ra == 801ad5d4
[    0.956000] Oops[#1]:
[    0.956000] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.8 #22
[    0.956000] task: 8181da78 ti: 8181e000 task.ti: 8181e000
[    0.956000] $ 0   : 00000000 10008f00 00010203 81049e40
[    0.956000] $ 4   : 00010203 000000d0 00000000 000000fd
[    0.956000] $ 8   : 00000000 80015490 00000000 80370000
[    0.956000] $12   : 00000000 00000001 00000000 2f736269
[    0.956000] $16   : 00010203 000000d0 8007bde0 81482000
[    0.956000] $20   : 00000000 00000004 81481f80 803c4b78
[    0.956000] $24   : 00000000 00000000
[    0.956000] $28   : 8181e000 8181fbe8 80b20000 801ad5d4
[    0.956000] Hi    : 00000000
[    0.956000] Lo    : 00000000
[    0.956000] epc   : 8028ddf8 strlen+0x4/0x20
[    0.956000]     Not tainted
[    0.956000] ra    : 801ad5d4 kstrdup+0x30/0x84
[    0.956000] Status: 10008f03 KERNEL EXL IE
[    0.956000] Cause : 00800008
[    0.956000] BadVA : 00010203
[    0.956000] PrId  : 0002a010 (Broadcom BMIPS4350)
[    0.956000] Modules linked in:
[    0.956000] Process swapper/0 (pid: 1, threadinfo=8181e000, task=8181da78, tls=00000000)
[    0.956000] Stack : 8148aa00 803c4bcc 00000000 801cd9d0 00000000 8148a400 818a1400 003f0000
          81482000 8007bde0 8148aa00 800ac78c 8148aa00 00000004 8037ae30 8181fc4c
          8148aa00 803bc074 803c0000 80074b84 00000000 00010000 00000004 ffffffff
          8037ae30 00000004 8148aa00 00000004 803c4b80 818a1400 803c0000 00000005
          81481f80 80074ce0 8181fc84 00000005 81879800 8008ece4 00000000 003f0000
          ...
[    0.956000] Call Trace:
[    0.956000] [<8028ddf8>] strlen+0x4/0x20
[    0.956000] [<801ad5d4>] kstrdup+0x30/0x84
[    0.956000] [<8007bde0>] allocate_partition+0x58/0x93c
[    0.956000] [<80074ce0>] add_mtd_partitions+0x90/0x144
[    0.956000] [<801cc228>] mtd_device_parse_register+0x78/0xcc
[    0.956000] [<801e7870>] of_flash_probe+0x658/0x728
[    0.956000] [<80216ee0>] platform_drv_probe+0x24/0x60
[    0.956000] [<801221f4>] driver_probe_device+0xcc/0x214
[    0.956000] [<800466f8>] __driver_attach+0x7c/0xb4
[    0.956000] [<800c38bc>] bus_for_each_dev+0x94/0xa4
[    0.956000] [<800c35e4>] bus_add_driver+0x104/0x1ec
[    0.956000] [<80122400>] driver_register+0xac/0x100
[    0.956000] [<80113a5c>] do_one_initcall+0x148/0x204
[    0.956000] [<803cbd1c>] kernel_init_freeable+0x168/0x220
[    0.956000] [<800157bc>] kernel_init+0x10/0x114
[    0.956000] [<800108a8>] ret_from_kernel_thread+0x14/0x1c
[    0.956000]
[    0.956000]
Code: 03e00008  27bd0028  00801021 <80430000> 10600003  00000000  080a377e  24420001  03e00008
[    1.192000] ---[ end trace 9d89ccbcae27fe40 ]---
[    1.200000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    1.200000]
[    1.200000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44787
2015-03-15 14:19:22 +00:00
Jonas Gorski
9d893d39bd brcm63xx: kmod-bcm63xx-udc: fix module path for 3.18+
Fix the module path for linux 3.18+.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44785
2015-03-15 14:19:10 +00:00
Jonas Gorski
12301a79b7 brcm63xx: fix 6368 cpu1 reg typo
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44784
2015-03-15 14:19:07 +00:00
Felix Fietkau
d8d9282372 lantiq: add a better fix to strip FCS from ethernet packets on XRX200
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44771
2015-03-15 09:47:34 +00:00
Felix Fietkau
55cdb4dbb3 lantiq: enable atm-esi by default for xrx200
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44769
2015-03-15 07:57:51 +00:00
Felix Fietkau
17fdf5fb85 brcm2708: fix mkdosfs command line options order
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44764
2015-03-15 05:18:50 +00:00
Felix Fietkau
65a0244ff8 x86: refresh kernel config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44759
2015-03-15 04:43:37 +00:00
Felix Fietkau
c062741575 x86: update to kernel 3.18
copied target/linux/x86/config-3.14 and target/linux/x86/patches-3.14 to
3.18 equivalents and then tweaked until it built.

Tested on alix2, soekris net4826 and soekris net4521.

Still having trouble with net4826 booting from Grub, alix2 and net4521
are fine.

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 44758
2015-03-15 04:43:30 +00:00
Felix Fietkau
50d4775df0 kernel: fix portability issues of the x86 vdso2c utility
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44757
2015-03-15 04:43:22 +00:00
Felix Fietkau
09ac7d4697 kernel: add missing config symbol for 3.18+
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44756
2015-03-15 04:40:10 +00:00
Rafał Miłecki
0a9b7ea932 bcm53xx: support NVRAM prefixes with extra / in devpath
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44755
2015-03-14 16:35:56 +00:00
Felix Fietkau
578aa97f8c x86: disable rts/cts for serial console in grub - fixes net48xx boot issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44753
2015-03-14 08:38:35 +00:00
Felix Fietkau
c5aa269d57 kernel: linux 3.19 also needs the network namespace related fd export patch (#19161)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44751
2015-03-14 05:38:14 +00:00
John Crispin
c7229b96b7 ralink: support change tx/rx ring size
Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44741
2015-03-13 08:38:08 +00:00
John Crispin
2c94eef5df ralink: use random generate mac address instead of default one.
Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44740
2015-03-13 08:38:01 +00:00
John Crispin
800da5a02e ralink: add wifi 5g dts info for cy-swr1100
Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44739
2015-03-13 08:37:45 +00:00
Felix Fietkau
7fc700dcca ath25: set myself as maintainer
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44737
2015-03-13 03:02:34 +00:00
Felix Fietkau
1850e0f0a7 Rename 'atheros' target to 'ath25'
Rename 'atheros' target to more precise 'ath25'.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44736
2015-03-13 03:02:28 +00:00
Felix Fietkau
558a452e1a atheros: remove odd board check during image build
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44735
2015-03-13 03:02:21 +00:00
Felix Fietkau
cfbaa00914 atheros: remove linux 3.14
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44734
2015-03-13 03:02:17 +00:00
Felix Fietkau
99104c3179 atheros: switch to 3.18
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44733
2015-03-13 03:02:12 +00:00
Felix Fietkau
ed8cdc3f8d atheros: v3.18: renumber backported patches
Move first 3 patches to 0xx numbers range to denote that this is
backported code and they should be removed when we update
kernel to version >= 3.19

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44732
2015-03-13 03:02:08 +00:00
Felix Fietkau
dae90fc130 atheros: v3.18: non-functional cleanup
To finally sync code with upsream cleanup registers headers, and update
several comments and kernel config symbols descriptions. No functional
changes.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44731
2015-03-13 03:02:00 +00:00
Felix Fietkau
7a46e008fb atheros: v3.18: cleanup includes
Remove odd and add missed includes.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44730
2015-03-13 03:01:50 +00:00
Felix Fietkau
1b5b20e51e atheros: v3.18: rearrange code between patches
Cleanup board patch by moving code to specific patches, and factor out
leds to separate patch. No functional changes.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44729
2015-03-13 03:01:42 +00:00
Felix Fietkau
6d29a8bc64 atheros: v3.18: move GPIO patches behind PCI
Move GPIO patches behind PCI patch, since they are not yet merged
upstream.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44728
2015-03-13 03:01:37 +00:00
Felix Fietkau
eb370470d8 atheros: v3.18: switch to IRQ domain
Rework MISC and PCI IRQ controllers code to use IRQ domains and bitops.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44727
2015-03-13 03:01:31 +00:00
Felix Fietkau
4a3bd49cf1 atheros: v3.18: update register names
Make register names more consistent, mostly add appropriate prefix
(AR5312_ or AR2315_) or _BASE suffix. Also add macro to simplify mask
and shift operation.

No functional changes.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44726
2015-03-13 03:01:21 +00:00
Felix Fietkau
9ceee12a49 atheros: v3.18: remap flash for boardconfig parsing
Rework boardconfig handling code to honestly remap flash memory region.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44725
2015-03-13 03:01:17 +00:00
Felix Fietkau
6b041d0b1d atheros: v3.18: make registers headers local
There are no external users (last one was PCI driver) for these headers,
so move them to arch directory. Few macroses from ar231x.h header moved
to devices.h and file was removed.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44724
2015-03-13 03:01:11 +00:00
Felix Fietkau
892ef42a77 atheros: v3.18: remap main SoC MMR memory
Honestly remap main SoC MMR mem and use accessor functions to
interact with registers. Now registers defined relatively to base
address (e.g. SDRAM controller base address).

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44723
2015-03-13 03:01:04 +00:00
Felix Fietkau
cd4462326c atheros: v3.18: cleanup register headers
AFAIK, no one AR2315+ chip (AR2315, AR2316, AR2317, AR2318) does not
contain IR block, so remove IR registers definitions. Also remove few
unused macroses.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44722
2015-03-13 03:00:59 +00:00
Felix Fietkau
99377012d4 atheros: v3.18: pass PCI IRQ and I/O mem via resources
Pass PCI IRQ and I/O memory ranges via platform device resources, this
change makes PCI controller driver independed from arch headers, so
also remove few includes.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44721
2015-03-13 03:00:51 +00:00
Felix Fietkau
6ba3363290 atheros: v3.18: remap PCI controller MMR memory
Honestly remap PCI controller MMR and use accessor functions to interact
with registers.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44720
2015-03-13 03:00:43 +00:00
Felix Fietkau
862a89b8f7 atheros: v3.18: add context container for PCI driver
Add container and place all context specific variables and structure to
it.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44719
2015-03-13 03:00:19 +00:00
Felix Fietkau
6d7e75fd99 atheros: v3.18: move PCI enable code to arch
Move PCI host interface enable code to arch, since it touches generic
SoC registers outside the PCI MMR region.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44718
2015-03-13 03:00:06 +00:00
Felix Fietkau
26136ce9ae atheros: v3.18: rearrange PCI regs definitions
Move PCI controller configuration registers from generic header to
driver source. No functional changes.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44717
2015-03-13 02:59:54 +00:00
Felix Fietkau
2c463148d1 atheros: v3.18: relocate PCI host DMA base definition
Put AR2315_PCI_HOST_SDRAM_BASEADDR macro to DMA header, since this is
arbitrary value and not some hw specific constant. Also this relocation
decouples dma from HW specific header.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44716
2015-03-13 02:59:43 +00:00
Felix Fietkau
f458d11655 atheros: v3.18: rework early initialization
Do not use prom_init() callback, do memory initialization in
plat_mem_setup() callback and move serial port configuration to
arch_initcall stage.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44715
2015-03-13 02:59:27 +00:00
Felix Fietkau
cdabe30755 atheros: v3.18: rearrange interrupt handling functions
No functional changes, just change functions order in source file.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44714
2015-03-13 02:59:19 +00:00
Felix Fietkau
2f1ff48ea3 atheros: v3.18: change calls logic
Check SoC family (AR5312+ or AR2315+) before call instead of checking it
inside the called function. Also convert ar{5312,2315}_init_device()
function to void, since they both return zero and nobody care about
return value.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44713
2015-03-13 02:59:04 +00:00
Felix Fietkau
8a98d187d5 atheros: v3.18: update names and declarations
Sync functions, variables and enums names with upstream. Mostly replace
'ar231x_' prefix by 'ath25_'.

No functional changes, except few 'int' -> 'unsigned' changes.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44712
2015-03-13 02:58:58 +00:00
Felix Fietkau
fb4c293629 atheros: v3.18: cleanup cpu-feature-overrides.h
Remove mention of undefined features.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44711
2015-03-13 02:58:49 +00:00
Felix Fietkau
2bb9583741 atheros: v3.18: remove eth platform device unused field
Ethernet controller driver don't use boarddata directly, so remove
corresponding field from its platform device structure.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44710
2015-03-13 02:58:37 +00:00
Felix Fietkau
ef65a21a0c atheros: v3.18: remove odd header reset.h
This header provides prototype for function without realization and
users.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44709
2015-03-13 02:58:24 +00:00
Felix Fietkau
6ede1e1726 atheros: v3.18: rename platform header
Rename ar231x_platform.h to ath25_platform.h

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44708
2015-03-13 02:58:17 +00:00