KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
31145 commits 3 branches 0 tags 154 MiB
Commit graph

193 commits

Author SHA1 Message Date
Luka Perkov
70a27a518e kernel: update 3.14 to 3.14.8 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41309
 2014-06-24 12:27:36 +00:00
John Crispin
e9f664c879 kernel: make sure the new UBIBLOCK symbol does not break builds 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41134
 2014-06-11 13:00:17 +00:00
John Crispin
ac5d5cbc79 kernel: add a NAND_SUPPORT symbol 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41122
 2014-06-11 12:59:22 +00:00
Luka Perkov
dfabb76883 kirkwood: cosmetic: move POGOE02 profile to different file 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40873
 2014-05-28 21:43:43 +00:00
Luka Perkov
4122af10f9 kirkwood: add support for Linksys EA4500 
Support is added only for kernel 3.14 - do not show it until
the switch is made.

Following uboot env changes are needed to make it work on stock uboot:
 2014-05-28 21:43:39 +00:00
Luka Perkov
3bb20dedcd kirkwood: add Pogoplug E02 kernel support for 3.14 
This also fixes a typo in the UBIFS_OPTS

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 40827
 2014-05-23 08:16:56 +00:00
Luka Perkov
55131c5f42 kirkwood: add support for 3.14 
* support for pogoplug_e02 is missing

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40808
 2014-05-21 12:04:09 +00:00
Gabor Juhos
d2812cb036 kernel: update 3.10 to 3.10.36 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40467
 2014-04-12 11:59:07 +00:00
Gabor Juhos
627baa28d3 kernel: update 3.10 to 3.10.34 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
 2014-03-27 09:28:33 +00:00
Gabor Juhos
f677b1bc7e kernel: update 3.10 to 3.10.32 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39707
 2014-02-23 10:59:40 +00:00
Luka Perkov
30c39f99a7 kirkwood: dockstar: remove sata from packages 
The dockstar doesn't have any sata ports.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 39596
 2014-02-16 00:14:29 +00:00
Luka Perkov
9ba7cbafe4 kirkwood: add support for Seagate GoFlexNet 
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 39595
 2014-02-16 00:14:27 +00:00
Luka Perkov
58fa3f8fdf kirkwood: update support for dockstar 
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:

nand erase 0x200000 0xfe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-dockstar-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset

Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by: Alexander Couzens <lynxis@fe80.eu>
CC: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39593
 2014-02-15 23:53:10 +00:00
Luka Perkov
0b0357b50e kirkwood: update support for ib62x0 
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:

nand erase 0x200000 0xfe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-ib62x0-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset

Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by: Luka Perkov <luka@openwrt.org>
CC: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39592
 2014-02-15 23:53:09 +00:00
Luka Perkov
0c25f159fd kirkwood: update support for iconnect 
Previous patch was pushed due to false user report. While at it fix alphabetic
ordering.

The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:

nand erase 0x200000 0x1fe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-iconnect-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset

Signed-off-by: Luka Perkov <luka@openwrt.org>
CC: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39591
 2014-02-15 23:53:08 +00:00
Gabor Juhos
a2543d72d8 kernel: update 3.10 to 3.10.28 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39399
 2014-01-26 11:30:34 +00:00
Gabor Juhos
0e2586a774 kernel: update 3.10 to 3.10.26 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39220
 2014-01-11 16:06:37 +00:00
Hauke Mehrtens
952db22551 kernel: update kernel 3.10 to 3.10.24 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39059
 2013-12-15 19:16:30 +00:00
Gabor Juhos
f1ef0b92be kernel: update 3.10 to 3.10.21 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38972
 2013-12-01 09:59:53 +00:00
Luka Perkov
6cbad59ead kirkwood: include ext4 support by default 
Several users reported that they would like this feature.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38901
 2013-11-24 23:07:34 +00:00
Luka Perkov
a48520f0f3 kirkwood: kernel: add missing config option 
Buildbot found missing config option for target kirkwood.

Signed-off-by: Jiri Slachta <slachta@cesnet.cz>

SVN-Revision: 38900
 2013-11-24 17:53:34 +00:00
Luka Perkov
770a285ee3 kirkwood: drop unnecessary argument from *_UBIFS_OPTS variables 
The '-U' aka '--squash-uids' is already used in Image/mkfs/ubifs function.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38898
 2013-11-23 15:55:12 +00:00
Luka Perkov
746ace4baf kirkwood: add support for iomega iconnect 
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Daniel Engberg <daniel.engberg@pyret.net>

SVN-Revision: 38897
 2013-11-23 15:55:10 +00:00
Hauke Mehrtens
6d4132b7a4 kirkwood: add missing kernel config CONFIG_REGMAP=y 
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 38837
 2013-11-17 16:05:09 +00:00
Luka Perkov
b294319215 kirkwood: add support for dockstar 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38664
 2013-11-06 19:24:32 +00:00
Gabor Juhos
35656042f1 kernel: update 3.10 to 3.10.18 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38652
 2013-11-05 08:25:45 +00:00
Luka Perkov
e00bc81a56 kirkwood: add userland support for Pogoplug E02 
This patch adds the userland support for the Pogoplug E02 by Cloud
Engines, Inc.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 38631
 2013-10-31 12:04:04 +00:00
Luka Perkov
2b0fa00da8 kirkwood: add Pogoplug E02 Kernel support 
This patch adds a DTS file for the Pogoplug E02 by Cloud Engines, Inc.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 38630
 2013-10-31 12:04:02 +00:00
Luka Perkov
6f26ef8b5d kirkwood: extend image/Makefile 
* use lower case letters in generated images
* extend support for boot/ directory
* fix some typos

Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 38629
 2013-10-31 11:44:28 +00:00
Luka Perkov
7938d16451 build: make MkuImage more generic 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38516
 2013-10-23 22:16:09 +00:00
Gabor Juhos
b6b06000eb kernel: update 3.10 to 3.10.17 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38506
 2013-10-23 12:51:05 +00:00
Luka Perkov
ad7564142d kirkwood: drop 3.3.x kernel version 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38404
 2013-10-14 19:46:45 +00:00
Luka Perkov
73246d2f64 kirkwood: upgrade to 3.10.15 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38402
 2013-10-14 19:46:40 +00:00
Luka Perkov
8c2f571ddd kirkwood: enable appended dtb (3.10.x) 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38379
 2013-10-13 03:35:13 +00:00
Luka Perkov
c808a4a7ef ubifs: enable building modular images 
Now it is possible to build ubi/ubifs images for only selected boards inside
single target.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38375
 2013-10-12 21:44:48 +00:00
Luka Perkov
fa3ab0c237 kirkwood: add support for UBI (3.10.x) 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38301
 2013-10-04 03:45:52 +00:00
Luka Perkov
5617993e10 kirkwood: enable dts compilation 
In 3.10 we might build those, so for now just add this functionality.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38297
 2013-10-03 02:50:03 +00:00
Luka Perkov
a30df8987d kirkwood: fix initramfs images 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38296
 2013-10-03 02:50:02 +00:00
Luka Perkov
38936426f7 kirkwood: update patches and configuration (3.10) 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38295
 2013-10-03 02:50:00 +00:00
Luka Perkov
0eb732c659 kirkwood: drop PROFILE from image names 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 38281
 2013-10-02 00:33:48 +00:00
Luka Perkov
0331657a4f kirkwood: add linux 3.10 support 
Backport appropriate patches to allow using device tree only board
defintions.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 38280
 2013-10-02 00:33:47 +00:00
Luka Perkov
7d1e5ae918 kirkwood: prepare for 3.10 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38279
 2013-10-02 00:33:45 +00:00
Luka Perkov
914ca3cb55 kirkwood: explicitly set CPU_TYPE to xscale 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38278
 2013-10-02 00:33:43 +00:00
Florian Fainelli
6a4f2922f6 targets: prepare for supporting normal and initramfs images 
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37049
 2013-06-27 19:58:31 +00:00
Felix Fietkau
d3a7b5633c kirkwood: disable the CONFIG_IP_ADVANCED_ROUTER kernel config override (#13702) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36937
 2013-06-15 11:50:50 +00:00
Jonas Gorski
e7b504ce8e kirkwood: convert to use the new jffs2_nand 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36861
 2013-06-05 20:58:53 +00:00
Steven Barth
ea94d66b0f Adapt default network configuration for IPv6 
SVN-Revision: 36278
 2013-04-09 08:03:08 +00:00
Jo-Philipp Wich
3a2cccda2e all targets: use numerically prefixed uci-defaults file names to better control order of execution 
SVN-Revision: 35217
 2013-01-18 12:42:53 +00:00
Florian Fainelli
1e103b2ecc target: enable XZ BCJ decompressor code after r35097 
Required to actually be able to mount squashfs xz compressed
filesystems.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35156
 2013-01-14 16:34:25 +00:00
Florian Fainelli
33f6c5ddb9 kernel: add missing USB configuration symbols after r34501 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34568
 2012-12-07 11:01:53 +00:00
Gabor Juhos
1f516235ea remove common symbols from 3.3 configs 
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34403
 2012-11-29 15:21:35 +00:00
Gabor Juhos
e91dc2e5b3 target: refresh all target configs with kconfig.pl 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33987
 2012-10-29 10:11:05 +00:00
John Crispin
de3c3d7181 Enable eSATA sheevaplug 
OpenWRT runs in a eSATA sheevaplug like a charm. This patch just enables
CONFIG_MACH_ESATA_SHEEVAPLUG so the proper MACHINE_START definition
is compiled in.

Signed-off-by: Unai Uribarri <unaiur@gmail.com>

SVN-Revision: 33266
 2012-08-24 06:15:06 +00:00
Luka Perkov
03a6d65c37 kernel: add Marvell SoC built-in RTC to modules 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32732
 2012-07-15 14:25:30 +00:00
Luka Perkov
c89e87d186 kirkwood: add support for seagate goflexnet and goflexhome 
Signed-off-by: Martin Mueller <mm@sig21.net>

SVN-Revision: 32725
 2012-07-15 12:18:29 +00:00
Luka Perkov
952ce3473d kirkwood: revert config changes from r32053 
SVN-Revision: 32719
 2012-07-15 00:08:52 +00:00
Luka Perkov
1c80d9f21d kirkwood: fix typo in uci-defaults/leds 
Signed-off-by: Martin Mueller <mm@sig21.net>

SVN-Revision: 32343
 2012-06-13 18:41:42 +00:00
Luka Perkov
be5229f0ba kirkwood: ib62x0 fix reboot 
SVN-Revision: 32131
 2012-06-08 23:17:46 +00:00
John Crispin
a4d96aae8d bump to 3.3.8 
SVN-Revision: 32055
 2012-06-05 06:57:51 +00:00
Luka Perkov
605012ad5d kirkwood: reorganize target 
SVN-Revision: 32053
 2012-06-05 00:43:56 +00:00
Gabor Juhos
c81c6516de kirkwood: use the generic uci-default functions for initial LED setup 
SVN-Revision: 31994
 2012-05-29 16:39:20 +00:00
Gabor Juhos
ba3ad24514 kirkwood: use uci-defaults to configure different boards 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31990
 2012-05-29 16:39:15 +00:00
Gabor Juhos
2ae5581447 kernel: update linux 3.3 to 3.3.7 
SVN-Revision: 31848
 2012-05-23 21:05:32 +00:00
Gabor Juhos
39994008cb linux: move certain disabled symbols to the generic configs 
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
 2012-05-15 10:58:52 +00:00
Gabor Juhos
b472e5d12e kernel: update linux 3.3 to 3.3.6 
SVN-Revision: 31709
 2012-05-14 09:18:32 +00:00
Gabor Juhos
ec27c35ebe kirkwood: fix Kconfig symbol for NSA-310 
SVN-Revision: 31673
 2012-05-09 16:16:52 +00:00
Gabor Juhos
200227e0b4 kirkwood: add support for the ZyXEL NSA-310 
SVN-Revision: 31669
 2012-05-09 11:38:43 +00:00
Gabor Juhos
213cbf4297 kirkwood: add RaidSonic ICY BOX IB-NAS62x0 board support 
Based on a patch by Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31668
 2012-05-09 11:38:41 +00:00
Gabor Juhos
d4876692c1 kirkwood: enable GPIO sysfs interface 
SVN-Revision: 31667
 2012-05-09 11:38:40 +00:00
Gabor Juhos
d1eed108bb kirkwood: nuke 2.6.37 support 
SVN-Revision: 31666
 2012-05-09 11:38:39 +00:00
Gabor Juhos
861b9b25e0 kirkwood: switch to 3.3 
SVN-Revision: 31665
 2012-05-09 11:38:37 +00:00
Gabor Juhos
b272041998 kirkwood: add 3.3 support 
Based on the 3.2.9 patches by Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31664
 2012-05-09 11:38:36 +00:00
Jo-Philipp Wich
be49daffc8 base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli 
SVN-Revision: 28933
 2011-11-10 12:16:41 +00:00
Jo-Philipp Wich
d6f02b62d4 add timeserver config to target specific system configs as well 
SVN-Revision: 28750
 2011-11-04 12:53:35 +00:00
Hauke Mehrtens
50c743e79e kernel: Update to version 2.6.37.6 
Thank you Peter Wagner for the patch

SVN-Revision: 26441
 2011-04-03 13:59:07 +00:00
Imre Kaloz
b8430e7427 update to 2.6.32.33 and 2.6.37.4 
SVN-Revision: 26226
 2011-03-18 13:25:32 +00:00
Imre Kaloz
c89b70adcd upgrade to 2.6.37 
SVN-Revision: 26225
 2011-03-18 13:09:21 +00:00
Imre Kaloz
b74308c433 only support EABI on ARM targets 
SVN-Revision: 25928
 2011-03-07 12:59:19 +00:00
Imre Kaloz
f7c0993027 switch back to xscale mtune, marvell_f is unlikely to get upstreamed 
SVN-Revision: 25707
 2011-02-25 17:33:04 +00:00
Florian Fainelli
31709b2c76 update to 2.6.35.11 
SVN-Revision: 25582
 2011-02-19 12:44:16 +00:00
Imre Kaloz
7ab8489f82 config symbol cleanup 
SVN-Revision: 25272
 2011-02-01 13:18:26 +00:00
Jo-Philipp Wich
81edc28358 enable mach support for OpenRD Base and OpenRD Client (#8417), spare the rest 
SVN-Revision: 24541
 2010-12-13 10:06:40 +00:00
Imre Kaloz
ead8ab8403 update to the latest stable kernels 
SVN-Revision: 24136
 2010-11-24 18:50:11 +00:00
Imre Kaloz
4052849677 switch from ext2 to ext4 (w/o) journaling 
SVN-Revision: 24084
 2010-11-22 12:12:39 +00:00
Imre Kaloz
0a5da348d1 update kernels to 2.6.32.25 and 2.6.35.8 
SVN-Revision: 23851
 2010-11-04 09:01:08 +00:00
Lars-Peter Clausen
4990417071 Fix patch 
SVN-Revision: 23702
 2010-10-29 06:59:46 +00:00
Lars-Peter Clausen
41ddcd79ab Adds leds and gpio keys support for Iomega iConnect. 
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 23682
 2010-10-27 21:22:07 +00:00
Imre Kaloz
81059a2a96 mark targets maintained by me 
SVN-Revision: 23668
 2010-10-27 13:46:00 +00:00
Lars-Peter Clausen
290e192ce8 Make mv_cesa crypto module available on Orion as well. 
SVN-Revision: 23229
 2010-10-04 21:33:07 +00:00
Lars-Peter Clausen
f05a30206c Iomega iConnect Wireless platform support 
This patch adds support for Iomega iConnect Wireless. Leds and wireless card
support are still missing.

Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 23217
 2010-10-04 09:19:52 +00:00
Lars-Peter Clausen
1162dfde82 Remove hwmon and i2c support from being built-in 
SVN-Revision: 23214
 2010-10-04 09:06:21 +00:00
Lars-Peter Clausen
83d6a36019 update 2.6.35.x to 2.6.35.7 
SVN-Revision: 23213
 2010-10-04 07:42:32 +00:00
Lars-Peter Clausen
ff9ddd7c0f Add jffs2 feature flag 
SVN-Revision: 23177
 2010-10-02 14:31:49 +00:00
Lars-Peter Clausen
8314ce02cc Fix mv_cesa module dependencies and .ko file location Thanks KanjiMonster & Memphiz 
SVN-Revision: 23145
 2010-09-28 16:32:08 +00:00
Jo-Philipp Wich
1cd4b50164 fix Dockstart default rdate interface in system config, reformat 
SVN-Revision: 22975
 2010-09-07 21:26:12 +00:00
Lars-Peter Clausen
a70e0d0665 Add kernel package for the mv_cesa crypto module 
SVN-Revision: 22877
 2010-09-03 01:03:22 +00:00
Lars-Peter Clausen
3fe1d8503c Set -mtune to marvell-f 
SVN-Revision: 22876
 2010-09-03 00:45:55 +00:00
Lars-Peter Clausen
34736c48b9 Build usb storage support into the kernel. 
This allows for example to put the rootfs on a usb-stick.

SVN-Revision: 22845
 2010-08-30 19:09:37 +00:00
Lars-Peter Clausen
dc116b1887 Add different profiles for Sheevaplug and Dockstar 
Thanks to Gerrit Visser

SVN-Revision: 22838
 2010-08-29 21:16:00 +00:00
Lars-Peter Clausen
429c8a56b6 Use kirkwood_nand_init instead of manually registering the nand driver 
This fixes that the device would hang during boot.

SVN-Revision: 22837
 2010-08-29 21:10:59 +00:00