KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
38135 commits 3 branches 0 tags 154 MiB
Commit graph

638 commits

Author SHA1 Message Date
Gabor Juhos
968ed2e58a x86/alix2: remove kernel config for 3.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37870
 2013-09-02 07:36:46 +00:00
Gabor Juhos
5aa70d283f x86/alix2: switch to 3.10.9 
Taken from the 'alix2: update to LINUX_VERSION 3.10.9'
patch: http://patchwork.openwrt.org/patch/3971/.

Russell says in the original patch:

"Initial whack at updating alix2 to a current kernel. It builds
and runs without problems so far. I copied target/linux/config-3.8,
target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to
their 3.10 equivalents and tweaked until it built.  The patches
required no changes."

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37869
 2013-09-02 07:36:45 +00:00
Gabor Juhos
562e76d22c x86/alix2: add kernel config for 3.10 
Taken from the 'alix2: update to LINUX_VERSION 3.10.9'
patch: http://patchwork.openwrt.org/patch/3971/.

Russell says in the original patch:

"Initial whack at updating alix2 to a current kernel. It builds
and runs without problems so far. I copied target/linux/config-3.8,
target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to
their 3.10 equivalents and tweaked until it built.  The patches
required no changes."

The current patch contains additional configuration tweaks.

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37868
 2013-09-02 07:36:44 +00:00
Gabor Juhos
11b1887c53 x86: add support for 3.10 
Add kernel configuration and patches for Linux 3.10.

Taken from the 'alix2: update to LINUX_VERSION 3.10.9'
patch: http://patchwork.openwrt.org/patch/3971/.

Russell says in the original patch:

"Initial whack at updating alix2 to a current kernel. It builds
and runs without problems so far. I copied target/linux/config-3.8,
target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to
their 3.10 equivalents and tweaked until it built.  The patches
required no changes."

The current patch contains additional configuration tweaks,
and the kernel patches were refreshed.

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37867
 2013-09-02 07:36:40 +00:00
Gabor Juhos
77e00faa33 x86/alix2: add kmod-usb2-pci to default packages 
The USB controller is sitting on the PCI bus and
without the package the EHCI controller is not
usable.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37835
 2013-08-25 14:42:34 +00:00
Felix Fietkau
09f4018b2e x86: Fix CONFIG_X86_GRUB_SERIAL="" 
With

    .config:CONFIG_X86_GRUB_SERIAL=""

which (AFAICT) is the way to tell GRUB not to use a serial console, in

    target/linux/x86/image/Makefile:ifneq ($(CONFIG_X86_GRUB_SERIAL),)

$(CONFIG_X86_GRUB_SERIAL) expands to `""' (a literal double double-quote),
making the condition unconditionally false.

This patch fixes the situation by passing CONFIG_X86_GRUB_SERIAL through
qstrip before testing.

Signed-off-by: Tamas TEVESZ <ice@extreme.hu>

SVN-Revision: 37749
 2013-08-10 18:35:29 +00:00
John Crispin
f0b5e7d419 x86: change /dev/console to tty to fix job control 
Job control is turned off because it cannot obtain controlling terminal on
/dev/console, so it is impossible to do any job control operation behind
real x86 device (keyboard+monitor or virtualized).

This patch switches /dev/console to tty devices for ash on x86 generic target.

Signed-off-by: Jiri Slachta <slachta@cesnet.cz>

SVN-Revision: 37693
 2013-08-04 17:05:33 +00:00
Felix Fietkau
73c4d73d6d build: unify target independent optimization options 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37600
 2013-07-29 09:38:29 +00:00
Hauke Mehrtens
72f73ab041 x86: fix kmod-gpio-pc8736x dependencies 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37447
 2013-07-19 14:55:51 +00:00
Jonas Gorski
960002ed4b x86: switch rdc to to gpio_keys_polled 
gpio_buttons have been deprecated since a long time.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37435
 2013-07-19 13:20:39 +00:00
Felix Fietkau
b95bdc8ab5 kernel/base-files: clean up old code related to refreshing mtd partitions, it is no longer used anywhere 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37282
 2013-07-14 12:56:58 +00:00
Florian Fainelli
6a4f2922f6 targets: prepare for supporting normal and initramfs images 
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37049
 2013-06-27 19:58:31 +00:00
Jonas Gorski
1beaf031d1 target: don't build jffs2 nor images by default 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36863
 2013-06-05 20:58:59 +00:00
Gabor Juhos
46225b99d9 kernel: update linux 3.8 to 3.8.13 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36724
 2013-05-26 16:02:31 +00:00
Gabor Juhos
e57c7d6c12 kernel: update linux 3.8 to 3.8.12 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36576
 2013-05-08 08:53:53 +00:00
Gabor Juhos
8a9fe26f20 kernel: update linux 3.8 to 3.8.11 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36507
 2013-05-01 22:15:18 +00:00
Gabor Juhos
d557a51a40 x86/geos: switch to 3.8.10 
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36496
 2013-04-30 10:44:09 +00:00
Gabor Juhos
f718179af5 kernel: update linux 3.8 to 3.8.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36493
 2013-04-30 10:43:59 +00:00
Gabor Juhos
36d4fd70bc kernel: update linux 3.8 to 3.8.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36453
 2013-04-26 16:55:42 +00:00
John Crispin
831c7ea04f preinit: move cmdline failsafe= handling ot the generic code 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36430
 2013-04-25 19:02:37 +00:00
Steven Barth
4e8f7f37ed Change default IPv6 config to enable DHCPv6-PD 
SVN-Revision: 36384
 2013-04-22 19:40:16 +00:00
Gabor Juhos
151cadfe32 kernel: update linux 3.8 to 3.8.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36363
 2013-04-19 08:07:34 +00:00
Felix Fietkau
96bb7c123b build: consistently use 'depends on' instead of 'depends' 
make the syntax more compatible with kernel menuconfig

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36351
 2013-04-17 15:36:41 +00:00
Gabor Juhos
604395650a kernel: update linux 3.8 to 3.8.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36332
 2013-04-14 09:25:53 +00:00
Steven Barth
ea94d66b0f Adapt default network configuration for IPv6 
SVN-Revision: 36278
 2013-04-09 08:03:08 +00:00
Gabor Juhos
9e6ae6ab5d x86/generic: remove old kernel configs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36256
 2013-04-07 15:53:17 +00:00
Gabor Juhos
0d0bfe3d41 x86/generic: switch to 3.8 
Only tested within a VM.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36255
 2013-04-07 15:53:15 +00:00
Gabor Juhos
f5d28ea3ce x86/generic: add config for 3.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36254
 2013-04-07 15:53:13 +00:00
Gabor Juhos
71a51e3b91 x86/alix2: remove old kernel configs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36253
 2013-04-07 15:53:11 +00:00
Gabor Juhos
15d311ec18 x86/alix2: switch to 3.8 
Tested on an alix2d13 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36252
 2013-04-07 15:53:09 +00:00
Gabor Juhos
9d05b1b683 x86/alix2: add config for 3.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36251
 2013-04-07 15:53:08 +00:00
Gabor Juhos
89f690843f x86: add support for 3.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36250
 2013-04-07 15:53:05 +00:00
Hauke Mehrtens
45b24fa771 kernel: add some missing config options found by the buildbot. 
SVN-Revision: 35945
 2013-03-10 20:25:19 +00:00
Gabor Juhos
23b3b3a194 kernel: update linux 3.7 to 3.7.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35860
 2013-03-03 13:57:40 +00:00
Florian Fainelli
1dd9e661be x86/rdc: migrate to common led helper functions 
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35664
 2013-02-18 10:38:05 +00:00
Gabor Juhos
3f749d1e8e kernel: update linux 3.7 to 3.7.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35644
 2013-02-17 21:32:42 +00:00
Gabor Juhos
7f20c2e19a update x86 generic to kernel v3.7 
Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35616
 2013-02-16 12:12:52 +00:00
Gabor Juhos
162b8e23a5 kernel: update linux 3.7 to 3.7.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35604
 2013-02-15 07:36:15 +00:00
Florian Fainelli
31dc805f88 x86: update config-3.7 for x86 (turn off CONFIG_GPIO_ICH) 
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35601
 2013-02-14 13:00:07 +00:00
Gabor Juhos
bae4bfe3f8 kernel: update linux 3.7 to 3.7.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35571
 2013-02-12 09:51:11 +00:00
Gabor Juhos
08ff976720 kernel: update linux 3.7 to 3.7.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35476
 2013-02-04 10:02:56 +00:00
Gabor Juhos
4ac6eb480b x86/kvm_guest: add support for 3.7 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35460
 2013-02-02 15:31:57 +00:00
Gabor Juhos
c340ef2ae2 x86: add missing symbols for 3.7 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35459
 2013-02-02 15:31:55 +00:00
Gabor Juhos
0f46f47512 x86/kvm_guest: add missing symbols for 3.3 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35458
 2013-02-02 15:31:54 +00:00
Gabor Juhos
ab3e3cacaa alix2: convert from kernel version 3.3.8 to 3.7.5 
[juhosg: use 3.7.5 instead of 3.7.3]

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35457
 2013-02-02 15:31:52 +00:00
Gabor Juhos
562ba537fc kernel: update linux 3.7 to 3.7.5 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35390
 2013-01-29 18:29:45 +00:00
Gabor Juhos
15be1c9ee7 kernel: update linux 3.7 to 3.7.4 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35318
 2013-01-24 17:08:37 +00:00
Gabor Juhos
0de21d9747 kernel: update linux 3.7 to 3.7.3 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35216
 2013-01-18 11:44:42 +00:00
Jo-Philipp Wich
7399df1d69 x86: explicitely pass staging directory to grub-mkimage instead of relying on build time defaults (#12821) 
SVN-Revision: 35200
 2013-01-17 15:46:26 +00:00
Florian Fainelli
1e103b2ecc target: enable XZ BCJ decompressor code after r35097 
Required to actually be able to mount squashfs xz compressed
filesystems.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35156
 2013-01-14 16:34:25 +00:00
Gabor Juhos
c19c30cefd kernel: update linux 3.7 to 3.7.2 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35100
 2013-01-12 11:43:08 +00:00
Felix Fietkau
741f6ba7ef x86: fix typo in alix2/net5501 default packages 
SVN-Revision: 34972
 2013-01-02 16:09:23 +00:00
Mirko Vogt
4d4b2d3ced merge /lib/functions/boot.sh and /lib/functions.sh 
SVN-Revision: 34794
 2012-12-19 16:07:53 +00:00
Mirko Vogt
439a869090 Do not overload mount-call - trying to reduce confusion 
The behaviour of calling 'mount' differed depending on whether it called
the busybox-mount, the mount of util-linux, the mount defined in
/lib/functions.sh and /lib/functions/boot.sh

/etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh,
both re-defining 'mount'.

SVN-Revision: 34792
 2012-12-19 16:07:46 +00:00
Gabor Juhos
029553b698 refresh kernel configs with kconfig.pl 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34763
 2012-12-18 15:54:15 +00:00
Gabor Juhos
7ff7340304 geos: add missing config-3.7 file 
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34762
 2012-12-18 15:51:45 +00:00
Gabor Juhos
8903f8581b kernel: update linux 3.7 to 3.7.1 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34760
 2012-12-18 15:13:31 +00:00
Gabor Juhos
5a680f1cbf geos: update to 3.7 
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34755
 2012-12-18 14:50:48 +00:00
Gabor Juhos
9b15d3e22a kernel: add 3.7 support for x86 
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34754
 2012-12-18 14:50:47 +00:00
Gabor Juhos
44b9898251 kernel: update linux 3.6 to 3.6.11 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34748
 2012-12-18 14:41:16 +00:00
Gabor Juhos
2b378d11c8 kernel: update linux 3.6 to 3.6.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34639
 2012-12-11 20:14:39 +00:00
Gabor Juhos
2581173660 kernel: update linux 3.6 to 3.6.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34578
 2012-12-08 15:01:33 +00:00
Florian Fainelli
33f6c5ddb9 kernel: add missing USB configuration symbols after r34501 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34568
 2012-12-07 11:01:53 +00:00
Gabor Juhos
ea17e36482 kernel: Update Geos to 3.6.8 
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34411
 2012-11-29 17:37:19 +00:00
Gabor Juhos
1f516235ea remove common symbols from 3.3 configs 
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34403
 2012-11-29 15:21:35 +00:00
Jo-Philipp Wich
298a8e2300 x86/generic: don't disable usbfs (#12452) 
SVN-Revision: 34139
 2012-11-10 23:28:58 +00:00
Felix Fietkau
46288bf98e x86: use $(strip) for the at_keyboard check 
SVN-Revision: 34127
 2012-11-09 10:53:36 +00:00
Felix Fietkau
0a9e05fb0e x86: only enable at_keyboard for the generic and kvm_guest subtargets to avoid hangs on alix2 and others (thx, russell) 
SVN-Revision: 34126
 2012-11-09 10:19:51 +00:00
Jo-Philipp Wich
f600ec5b3b x86: allow both old and new grub signatures in sysupgrade 
SVN-Revision: 33898
 2012-10-23 16:34:00 +00:00
Felix Fietkau
95e642632a x86: correct image magic for grub2 images 
Sysupgrade broke on x86 when grub2 superceded grub.  This patch
corrects tha magic_word to be expected in grub2 combined images.

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 33890
 2012-10-22 16:06:29 +00:00
Florian Fainelli
60ecd5fe04 merge the RDC R-321x target as a subtarget of x86 
SVN-Revision: 33779
 2012-10-15 18:54:34 +00:00
Jo-Philipp Wich
4cfd3dc8ed x86/kvm_guest: enable PCIE support 
SVN-Revision: 33741
 2012-10-12 16:51:31 +00:00
Felix Fietkau
856fba88d9 x86: remove the reboot=bios command line parameter (#12193) 
SVN-Revision: 33671
 2012-10-09 15:20:11 +00:00
Felix Fietkau
1abbe676d1 x86: rename the iso file to openwrt-x86-generic.iso 
SVN-Revision: 33641
 2012-10-07 23:05:39 +00:00
Felix Fietkau
0dd7644ec7 x86: remove grub-legacy 
SVN-Revision: 33640
 2012-10-07 23:01:56 +00:00
Felix Fietkau
a1bcd25082 x86: add grub2 iso support 
SVN-Revision: 33639
 2012-10-07 23:01:52 +00:00
Felix Fietkau
53cc34e517 x86/generic: enable cdrom + iso9660 support 
SVN-Revision: 33638
 2012-10-07 23:01:47 +00:00
Felix Fietkau
493b7c7f3c x86: avoid using grub prepare when using grub2 
SVN-Revision: 33525
 2012-09-23 09:59:56 +00:00
Felix Fietkau
999252dccc x86-generic: enable a few more common kernel options/drivers 
SVN-Revision: 33516
 2012-09-22 23:29:20 +00:00
Felix Fietkau
0260262f0b x86: enable usb storage support for the generic subtarget to support booting from usb devices 
SVN-Revision: 33514
 2012-09-22 21:15:59 +00:00
Felix Fietkau
52e8ee0666 x86: add support for building grub2 images 
SVN-Revision: 33513
 2012-09-22 20:10:42 +00:00
Felix Fietkau
ce4244c8af x86: split generic image building into a separate script 
SVN-Revision: 33511
 2012-09-22 20:10:35 +00:00
Felix Fietkau
6c02dd2b04 x86: rename gen_image_x86.sh to gen_image_grub.sh 
SVN-Revision: 33510
 2012-09-22 20:10:31 +00:00
John Crispin
f186bff0ef add missing kvm_guest kernel options 
SVN-Revision: 33319
 2012-09-05 19:38:42 +00:00
John Crispin
76954dc8b0 set xen images to gzip compression, fixes #11970 
SVN-Revision: 33192
 2012-08-15 09:20:12 +00:00
Jo-Philipp Wich
c8a0166212 Fix hard reset of alix/soekris hardware under heavy NIC load 
The following patch corrects a hard reset that occurs on alix and
soekris net5501 hardware. Specifically, this is an issue with the via
rhine NIC driver. Under periods of extreme load, the via rhine driver
can cause a reset of the entire system. When this happens no output is
seen on the console, the device simply reboots. This was reported in the
following ticket:

Consistent crash on Soekris NET5501
https://dev.openwrt.org/ticket/11882

I was able to reproduce the problem locally with numerous alix 2d13
platforms. Under heavy 64 byte frame size load from a Smartbits traffic
generator, the alix hardware will hard reset in under 5 minutes. The
same hardware, under the same load, on FreeBSD 9.0 does not reset.

The patch below backports most of the via rhine changes from kernel 3.5.
With OpenWrt trunk being on kernel 3.3.8, it seemed prudent to bring
these changes in to avoid this serious issue.

I've tested this heavily in my test environment and was able to keep the
device stable under load for extended periods of time without any resets.

Also, a nice side effect of this change is that it significantly raises
the performance the platform. Without this patch the alix 2d13 can move
approximately 29,000 packets per second at 64 byte frame sizes. After
this patch the alix can move 52,000 packets per second at 64 byte frame
sizes.

I put this patch under the x86 patches as those are the only platforms
with via rhine hardware that I'm aware of. If it needs to go some place
else please let me know.

Thanks,
Adam

Signed-off-by: Adam Gensler <openwrt@kristenandadam.net>

SVN-Revision: 33072
 2012-08-09 09:41:22 +00:00
Florian Fainelli
d359d46182 make kmod-fb dependent on DISPLAY_SUPPORT and update targets accordingly 
SVN-Revision: 32869
 2012-07-25 19:36:19 +00:00
Florian Fainelli
c3b9a987b7 move leds modules back to target modules.mk 
SVN-Revision: 32851
 2012-07-25 15:49:57 +00:00
Florian Fainelli
bca45d6d8a move i2c modules back to target modules.mk 
SVN-Revision: 32850
 2012-07-25 15:49:54 +00:00
Florian Fainelli
2bfb2a797c move more x86-specific modules back to target modules.mk 
SVN-Revision: 32848
 2012-07-25 15:49:49 +00:00
Florian Fainelli
d973768580 move x86 specific ide/pata modules to x86' modules.mk 
SVN-Revision: 32846
 2012-07-25 15:49:42 +00:00
Vasilis Tsiligiannis
1978c07539 Fix sysupgrade for squashfs, jffs2 and ext4 images 
* use 'fsync' with 'dd' for image writing
	* save config to boot partition

SVN-Revision: 32465
 2012-06-19 22:36:53 +00:00
Jo-Philipp Wich
f06473f8ff optimize kernel config for kvm_guest 
This patch enables few extra kernel options for the kvm_guest subtarget:
- Tickless kernel to avoid timer ticks in idle guests, reduces CPU usage
- Enable paravirtualization steal time support

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 32436
 2012-06-18 23:36:50 +00:00
Jo-Philipp Wich
cbac321164 remove inittab override 
SVN-Revision: 32422
 2012-06-18 11:50:37 +00:00
Jo-Philipp Wich
e3663ff907 use ttyS0 @ 115200 baud as default for KVM guests 
SVN-Revision: 32384
 2012-06-15 12:59:49 +00:00
John Crispin
a4d96aae8d bump to 3.3.8 
SVN-Revision: 32055
 2012-06-05 06:57:51 +00:00
Gabor Juhos
2ae5581447 kernel: update linux 3.3 to 3.3.7 
SVN-Revision: 31848
 2012-05-23 21:05:32 +00:00
Gabor Juhos
07b5a3eea2 x86: remove support for old kernels 
SVN-Revision: 31804
 2012-05-18 20:10:42 +00:00
Gabor Juhos
604e3aac0a x86: remove subtarget specific LINUX_VERSION overrides 
SVN-Revision: 31803
 2012-05-18 20:10:38 +00:00
Gabor Juhos
d9dab97d38 x86/ep80579: switch to 3.3 
Also fix build errors in the ep80579-drivers package.
Compile tested only.

SVN-Revision: 31802
 2012-05-18 20:10:33 +00:00
Gabor Juhos
a5de52c244 x86/olpc: switch to 3.3 
Compile tested only.

SVN-Revision: 31784
 2012-05-18 09:57:32 +00:00
Gabor Juhos
9e54e012d6 x86: image: select bootscript images by default for OLPC 
SVN-Revision: 31783
 2012-05-18 09:57:29 +00:00
Gabor Juhos
562e468ae5 x86/thincan: switch to 3.3 
Compile tested only.

SVN-Revision: 31765
 2012-05-17 06:41:01 +00:00
Gabor Juhos
1f7f8376a6 x86/xen_domu: switch to 3.3 
Compile tested only.

SVN-Revision: 31764
 2012-05-17 06:41:00 +00:00
Gabor Juhos
8bb7ddecfd x86/kvm_guest: switch to 3.3 
Compile tested only.

SVN-Revision: 31763
 2012-05-17 06:40:58 +00:00
Gabor Juhos
f14d1a588d x86/generic: switch to 3.3 
Compile tested only.

SVN-Revision: 31762
 2012-05-17 06:40:56 +00:00
Gabor Juhos
eb2fe5e863 x86/alix2: switch to 3.3 
Compile tested only.

SVN-Revision: 31753
 2012-05-16 10:45:02 +00:00
Gabor Juhos
fb7da5bbde x86/net5501: switch to 3.3 
Compile tested only.

SVN-Revision: 31752
 2012-05-16 10:44:59 +00:00
Gabor Juhos
9e049ce25c x86: sync 3.3 configs 
SVN-Revision: 31751
 2012-05-16 10:44:55 +00:00
Gabor Juhos
19f691f8e4 x86: sync 3.2 configs 
SVN-Revision: 31750
 2012-05-16 10:44:52 +00:00
Gabor Juhos
724fd5e657 x86: sync 2.6.39 configs 
SVN-Revision: 31749
 2012-05-16 10:44:49 +00:00
Gabor Juhos
39994008cb linux: move certain disabled symbols to the generic configs 
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
 2012-05-15 10:58:52 +00:00
Gabor Juhos
b472e5d12e kernel: update linux 3.3 to 3.3.6 
SVN-Revision: 31709
 2012-05-14 09:18:32 +00:00
Gabor Juhos
34018a630f kernel: update linux 3.3 to 3.3.5 
SVN-Revision: 31645
 2012-05-07 20:11:43 +00:00
Gabor Juhos
cbfce53831 kernel: update linux 3.3 to 3.3.4 
SVN-Revision: 31541
 2012-04-30 08:38:11 +00:00
Jonas Gorski
8fd383ae2e kernel: update linux 3.3 to 3.3.3 
SVN-Revision: 31460
 2012-04-24 09:25:38 +00:00
Jonas Gorski
22b4e6b882 kernel: update linux 3.2 to 3.2.16 
SVN-Revision: 31459
 2012-04-24 09:25:35 +00:00
Gabor Juhos
4b6833b176 x86: restore config-default, it is needed for 2.6.39 
Reported-by: Thomas Heil <heil@terminal-consulting.de>

SVN-Revision: 31452
 2012-04-23 16:56:08 +00:00
Gabor Juhos
f63d216467 x86: remove 2.6.32 support 
SVN-Revision: 31415
 2012-04-21 16:17:48 +00:00
Jonas Gorski
d0bfc67e2e kernel: x86: also update subtarget kernel versions 
SVN-Revision: 31338
 2012-04-17 21:01:43 +00:00
Jo-Philipp Wich
a0f0213462 bump to Linux v3.3.1 
SVN-Revision: 31314
 2012-04-16 15:04:47 +00:00
Jo-Philipp Wich
4b230e19fc PATCH: Disable console terminal in Grub for alix2 target 
The alix2 target has the VGA console for grub enabled by default. This
prevents the grub menu from appearing on bootup. It is disabled by
default for the other embedded x86 platforms. This patch corrects that
behavior for the alix2 target.

Signed-off-by: Adam Gensler <openwrt@kristenandadam.net>

SVN-Revision: 31270
 2012-04-12 23:30:27 +00:00
Jo-Philipp Wich
fcfdbd4961 add missing Kernel symbol spotted by buildbot 
SVN-Revision: 31232
 2012-04-10 10:09:27 +00:00
Jonas Gorski
16b4cbcdd6 kernel: update linux 3.2 to 3.2.14 
SVN-Revision: 31222
 2012-04-09 14:48:51 +00:00
Florian Fainelli
60e195d399 geos: add 'tc' and kmod-sched for bonding 
The Geos2 includes 2 ADSL+ interfaces, and as such it needs to have the TEQL scheduler for bonding.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 31094
 2012-03-27 17:47:37 +00:00
Jens Muecke
1d2b19c4bf Disable keyboard for x86 default config - revoke patch 30966 
This was already fixed by commit 30309 and is part of generic x86 target.

SVN-Revision: 31052
 2012-03-21 19:10:02 +00:00
Jo-Philipp Wich
884f964e62 alix2: add require crypto kmods (#10410) 
SVN-Revision: 30980
 2012-03-18 18:56:02 +00:00
Jens Muecke
deac1c16a1 Enable keyboard for x86 
This is required for qemu like descripted in
here http://wiki.openwrt.org/doc/howto/qemu

SVN-Revision: 30966
 2012-03-17 21:32:08 +00:00
Jo-Philipp Wich
bafdae9233 enable RTC_CLASS for Linux 3.2 and 3.3 
SVN-Revision: 30717
 2012-02-25 13:06:26 +00:00
Jo-Philipp Wich
74db55a982 config: deprecated symbol CONFIG_LEDS_GPIO_PLATFORM 
CONFIG_LEDS_GPIO_PLATFORM went away a while ago.

http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=commit;h=2bcc7ed5b83b0a59c6976476e8788675038fb11b

Also, most platforms comment out CONFIG_LEDS_GPIO but not x86 for some reason.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 30708
 2012-02-24 10:35:20 +00:00
Vasilis Tsiligiannis
eed8e2a4fd Disable by default padding of images 
SVN-Revision: 30590
 2012-02-16 17:54:07 +00:00
Vasilis Tsiligiannis
8676e49d9d Allow gzipping of squashfs images with padded jffs2 partition 
SVN-Revision: 30589
 2012-02-16 17:54:04 +00:00
Vasilis Tsiligiannis
ab09db09fc GZip only ext4 and padded images 
SVN-Revision: 30588
 2012-02-16 17:54:01 +00:00
Vasilis Tsiligiannis
b4f51343c6 Make gzipping of images configurable via menuconfig 
SVN-Revision: 30587
 2012-02-16 17:53:57 +00:00
Jo-Philipp Wich
f35c4a3266 8139cp: backport patches to make driver stable again 
List of patches that Jo-Philipp groveled out of git.

Redux: defuzzed.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 30366
 2012-02-07 21:56:51 +00:00
Vasilis Tsiligiannis
834be6c1fe alix2, geos: Adjust CFLAGS 
Clone of CFLAGS change from r30013 into Geos and Alix platforms.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 30353
 2012-02-07 13:00:47 +00:00
Vasilis Tsiligiannis
42ec97097e generic: Enable HPET, HID and AT keyboard support 
SVN-Revision: 30309
 2012-02-05 17:56:04 +00:00
Vasilis Tsiligiannis
b5ff8b85d6 generic: Add missing and remove unused config symbols 
SVN-Revision: 30133
 2012-02-04 20:45:17 +00:00
Jonas Gorski
d6afe712ab x86: make alix platform patch apply to 3.3 
Based on a patch from Philip Prindeville.

While at it, also refresh the patches.

SVN-Revision: 30025
 2012-02-03 20:17:00 +00:00
Jo-Philipp Wich
c433bfb571 disable additional PATA drivers in global 3.2 and 3.3 config, remove redundant symbols from alix2 config 
SVN-Revision: 30024
 2012-02-03 19:47:55 +00:00
Jo-Philipp Wich
40867f1b68 x86: trivial -- add missing CONFIG_GEOS symbol to top-level So that builds don't stall in x86 prompting for this symbol. [From Philip Prindeville, via http://patchwork.openwrt.org/patch/1828/] 
SVN-Revision: 30023
 2012-02-03 19:21:41 +00:00
Jo-Philipp Wich
79a3fdb9da geos: backport driver from linux-next to 3.2 and 3.3 The Geos driver is in linux-next and will be out in 3.4. It builds fine against 3.2.2 and 3.3-rc2. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> 
SVN-Revision: 30022
 2012-02-03 18:16:27 +00:00
Jo-Philipp Wich
25d605ab0e net5501: backport drivers from linux-next Backport net5501 platform driver from 3.4. Remove vestiges of old (pre-2.6.30) leds-net5501.c driver. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> 
SVN-Revision: 30021
 2012-02-03 18:14:02 +00:00
Jo-Philipp Wich
7a36f3d2ff x86: move additional oddball PATA drivers These should only be enabled in the generic image, as they bloat all of the other targets. Also add symbols for NET5501, ALIX, and GEOS which were added backported to 3.2 and 3.3. Restore PC speaker to Geos target. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> 
SVN-Revision: 30019
 2012-02-03 18:02:57 +00:00
Jo-Philipp Wich
d13c3cd073 net5501: adjust CFLAGS and package selection (#10893) This patches the CFLAGS for Geode LX CPUs for 4.3 and new GGC versions. This creates more compatible code and allowed me to boot my system first time with no troubles. Also, the missing kmod is added in. 
SVN-Revision: 30013
 2012-02-03 14:19:29 +00:00
Jonas Gorski
f99bf6517c x86: add 3.3 generic symbols 
Copy x86/config-3.2 to x86/config-3.3 and add additional symbols (for 3.3-rc2).

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 30002
 2012-02-02 21:01:59 +00:00
Jo-Philipp Wich
b6be49429b alix2: backport platform driver updates from linux-next Add patches to x86/patches-3.2 and x86/patches-3.3 (update will appear in 3.4). [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1817/] 
SVN-Revision: 30001
 2012-02-02 19:26:32 +00:00
Jo-Philipp Wich
7a9e4ffe8e alix2, geos, net5501: remove kmod-ledtrig-netfilter, its not used by any standard system facility 
SVN-Revision: 30000
 2012-02-02 19:11:52 +00:00
Jo-Philipp Wich
bf8bb9b661 alix2, goes, net5501: clean up default packages Remove packages which are dependencies of other packages Remove packages which are part of the default package list Remove DSL specific packages from net5501 Remove bridge package, we use the busybox applet Replace hostapd with wpad 
SVN-Revision: 29999
 2012-02-02 19:06:22 +00:00
Jo-Philipp Wich
047ba1e12e alix2, net5501: bump both subtargets to Linux 3.2.2 to align with the rest 
SVN-Revision: 29998
 2012-02-02 19:00:40 +00:00
Jo-Philipp Wich
1ae5715f2e geos: add missing files from previous commit 
SVN-Revision: 29997
 2012-02-02 18:59:51 +00:00
Jo-Philipp Wich
a1258ccaba geos: backport Geos driver from linux-next Backport of linux-next driver. Driver adds support for LEDS and S/W button. Add hotplug script for button actions. Add Openwrt system config for LEDS triggers. Add updated kernel .config for 3.2 symbols. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1816/] 
SVN-Revision: 29996
 2012-02-02 18:58:20 +00:00
Jo-Philipp Wich
415a375eaa geos: cleanup GPIO driver name In 3.1, the old drivers/char/ entry for the CS5535 GPIO driver went obsolete. Make Geos use a recent kernel and remove this ambiguity. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1815/] 
SVN-Revision: 29995
 2012-02-02 18:44:35 +00:00
Jo-Philipp Wich
5523eca4e5 net5501: correct net5501 h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Designate eth0 as wan interface, and bridge eth1/eth2/eth3. Add heartbeat LED trigger. Use correct CS5535 GPIO driver. Use correct USB drivers (OHCI not UHCI). Add MSR and HW clock support. Add GPIO mask definition. Add correct SATA drivers. Add LED triggers. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1802/] 
SVN-Revision: 29994
 2012-02-02 18:41:10 +00:00
Jo-Philipp Wich
3310df6b52 alix2: correct h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Drop obsolete CS5535 GPIO driver. 
[Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1804/]

SVN-Revision: 29981
 2012-02-01 15:31:23 +00:00
Jo-Philipp Wich
55b5e15bff create a config-3.2 for upcoming changes, rebase config-default to 2.6.39 
SVN-Revision: 29953
 2012-01-30 02:13:37 +00:00
Jo-Philipp Wich
2fc3fe1d09 Make the grub timeout configurable on x86 targets 
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>

SVN-Revision: 29786
 2012-01-19 01:14:45 +00:00
Jo-Philipp Wich
095f7f2da3 x86/config-3.2: add linux-3.2 symbols for x86 
The following symbols are missing for x86, in sorted order.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 29783
 2012-01-19 00:31:39 +00:00
Jo-Philipp Wich
be49daffc8 base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli 
SVN-Revision: 28933
 2011-11-10 12:16:41 +00:00
Jo-Philipp Wich
d6f02b62d4 add timeserver config to target specific system configs as well 
SVN-Revision: 28750
 2011-11-04 12:53:35 +00:00
Felix Fietkau
b17bfe4f68 x86: disable crashlog, ioremap of RAM does not work properly here 
SVN-Revision: 28599
 2011-10-26 11:49:25 +00:00
Nicolas Thill
b0d9bccafc x86: allow VDI & VMDK images for all subtargets (closes: #10255) 
SVN-Revision: 28518
 2011-10-22 13:09:15 +00:00
Daniel Dickinson
c0a625ffbf Add patch for linux-3.0 as well. 
Fix typo from previous submission with input-keys-polled.
Philip Prindeville - 2011-10-03 01:44:55

SVN-Revision: 28356
 2011-10-03 03:09:20 +00:00
Daniel Dickinson
7e372b6dcf New x86 platform specific symbol needed for 3.1-rc3. 2011-10-03 03:06:29 +00:00
Daniel Dickinson
541aa8e38e A lot of these options get set automatically when Geode is selected. 
Don't make the config more complicated than it needs to be.
Philip Prindeville - 2011-08-29 03:15:27

SVN-Revision: 28353
 2011-10-03 03:02:42 +00:00
Jo-Philipp Wich
ba46c7b3c6 Xen DomU: make sure kernel is gzip compressed, pygrub cannot handle xz 
SVN-Revision: 28197
 2011-09-08 22:18:26 +00:00
Florian Fainelli
cbd28ad0ec bump to 2.6.39.4 
Since linux gets developed on x86 more than all other hardware,
hardly makes sense to have our default x86 version be trailing
by over a year.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 28082
 2011-08-25 09:35:51 +00:00
Florian Fainelli
d2652dee9d update alix2 platform driver 
Add support for Ed Wildgoose's alix platform driver plus my
enhancement to add GPIO soft button support.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 28081
 2011-08-25 09:35:45 +00:00
Daniel Dickinson
7ef004a144 Add packages that will be relant as "There's a new Alix platform driver hitting linux-next upstream. Get ready for it in 2.6.39.4 and 3.0. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>"

SVN-Revision: 27929
 2011-08-08 02:33:18 +00:00
Felix Fietkau
4da138d899 x86/alix2: include WAN interface by default 
Include WAN interface by default, instead of putting both ports in the LAN bridge.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27787
 2011-07-26 16:37:48 +00:00
Felix Fietkau
41db64f8e0 x86/alix2: fix typo in target makefile 
Cut and paste cruft from borrowing from Geos platform.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27786
 2011-07-26 16:37:44 +00:00
Hauke Mehrtens
80956276a7 x86: add missing config symbols 
This adds some config symbols for kernel 3.0.

Thank you realopty for the patch.

This is from #9719.

SVN-Revision: 27775
 2011-07-25 21:21:01 +00:00
Imre Kaloz
f0f10fa599 add missing symbols for generic and x86 on 3.0, based on Philip Prindeville's patch 
SVN-Revision: 27762
 2011-07-24 22:04:08 +00:00
Felix Fietkau
b5e3f6cd81 x86: 2.6.39 requires additional symbol 
Sysfs support for DMI BIOS was added in 2.6.39.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27749
 2011-07-24 09:41:07 +00:00
Felix Fietkau
6d3bddb056 geos: include pppstats and pppdump in default packaging 
As the Geos box includes an ADSL modem that's targeted towards PPPoE, PPPoA, and bridged utilization, including these useful tools allows for easier configuration and troubleshooting.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27743
 2011-07-24 08:41:58 +00:00
John Crispin
2975f0aaf1 alix2: add/subtract features as needed 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27411
 2011-07-03 17:39:24 +00:00
Daniel Dickinson
88dcf8629d The Geode CS5535 and CS5536 companion chips are backward compatible with the SCx200 I2C drivers. 
Include this on Geos.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27368
 2011-07-03 02:59:00 +00:00
Jo-Philipp Wich
2c6bd71767 remove remaining uci-defaults 
SVN-Revision: 27291
 2011-06-27 01:42:31 +00:00
Florian Fainelli
9f63b7326f geos: deprecate uci-defaults files 
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 27287
 2011-06-25 22:05:10 +00:00
Florian Fainelli
1f6047496e alix2: add config files for bridging 
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 27286
 2011-06-25 22:05:05 +00:00
Jo-Philipp Wich
70fb318a90 Restrict Soekris specific base-files handling to Soekris profiles, based on patch by Philip Prindeville <philipp@redfish-solutions.com> 
SVN-Revision: 27241
 2011-06-19 23:05:21 +00:00
Felix Fietkau
9567b93e5c x86: add additional companion chip drivers to alix2 and geos 
Add the MFGPT high precision timers, and integration into the schedule (clock events).

Use OHCI, not UHCI usb module.

Remove VIA SATA driver from Alix2... that was accidentally cloned from net5501 platform.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27038
 2011-05-31 16:57:05 +00:00
Felix Fietkau
68af223efe x86: remove pata-amd driver from generic x86 images, add addition cs553x modules 
The pata-cs5535/pata-cs5536 driver is actually fairly rare: it only gets used on embedded platforms. Therefore, we remove it from the generic x86 configuration.

Also, add definitions for other useful geode modules (high-res timers, MFGPT timers, etc).

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27037
 2011-05-31 16:57:01 +00:00
Daniel Dickinson
f2c86a3835 Simple typo for kmod- prefix in alix2 target makefile. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 26945
 2011-05-19 04:29:40 +00:00
John Crispin
dfc19a34b4 * adds support for Artec Thincan 
Signed-of-By: Lauri Võsandi <lauri.vosandi@gmail.com>

SVN-Revision: 26919
 2011-05-17 10:35:14 +00:00
Daniel Dickinson
09e0d10010 Removed Alix.mk profile which was accidently left as an empty file applying the patch during r26879 and r26880. 
SVN-Revision: 26882
 2011-05-13 07:23:11 +00:00
Daniel Dickinson
8d66bf7e72 Add missed files from previous commit: This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's. 
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.

GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)

GPIO 24 : Soft switch 1

No kernel version bump.  Added i2c-scx200-acb for lm-sensors support.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 26880
 2011-05-13 06:08:49 +00:00
Daniel Dickinson
937362f270 This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's. 
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.

GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)

GPIO 24 : Soft switch 1

No kernel version bump.  Added i2c-scx200-acb for lm-sensors support.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 26879
 2011-05-13 06:06:42 +00:00
Jo-Philipp Wich
ae5435adc9 geos: remove unneeded modules The via-sata and gpio-nsc modules are both unneeded on the Geos platform. 
SVN-Revision: 26811
 2011-05-03 21:18:12 +00:00
Felix Fietkau
ae51f1972f x86: remove 2.6.35 patches 
SVN-Revision: 26710
 2011-04-17 18:39:50 +00:00
Daniel Dickinson
ff1bc5c29d x86: missing kernel symbols 
Please include these two missing kernel CONFIG_ symbols.

SVN-Revision: 26679
 2011-04-15 04:56:49 +00:00
Daniel Dickinson
4021469e4a geos: Add PC speaker to kernel definitions 
Add the PC speaker back to the Geos platform.

Add DMI support in BIOS.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 26678
 2011-04-15 04:51:05 +00:00
Jo-Philipp Wich
76bfcee5ea gzip jffs2 images Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr> 
SVN-Revision: 26625
 2011-04-12 20:48:47 +00:00
Jo-Philipp Wich
d1f053d7ef Enable padding of jffs2 images to user specified filesystem size Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr> 
SVN-Revision: 26624
 2011-04-12 20:46:34 +00:00
Jo-Philipp Wich
1340b0b98e Bump kernel version to 2.6.37.6 
SVN-Revision: 26525
 2011-04-07 21:54:29 +00:00
Felix Fietkau
e00dcbc593 x86/geos: redux of cs5535 version 
The previous technique didn't work with "make defconfig" correctly.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 26458
 2011-04-03 23:30:26 +00:00
Daniel Dickinson
eb502bf450 We $(PLATFORM_SUBDIR)/target.mk gets included, include/kernel-version.mk hasn't yet been included... therefore KERNEL_PATCHVER hasn't yet been defined. 
Ergo, we need to use a deferred definition of GEOS_GPIO (and can't use ifeq/endif).

Signed-off-by: Philip Prindeville <philipp@openwrt.org

SVN-Revision: 26397
 2011-04-02 02:02:24 +00:00
Florian Fainelli
ad9945105b geos: support cpu MSR register and flashrom for coreboot upgrades 
The early versions of the platform shipped with coreboot 3.0, which had some issues rebooting correctly the first time.

Allow the user to upgrade his BIOS from Linux.

Signed-of-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 26344
 2011-03-28 21:31:02 +00:00
Travis Kemen
99c3236182 The Geos target (and probably others, like net5501) need to grab the new cs5535 gpio driver. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 26330
 2011-03-28 01:18:58 +00:00
Imre Kaloz
b8430e7427 update to 2.6.32.33 and 2.6.37.4 
SVN-Revision: 26226
 2011-03-18 13:25:32 +00:00
Hauke Mehrtens
b78210955c kernel: update to kernel version 2.6.32.32 
SVN-Revision: 26124
 2011-03-13 17:12:20 +00:00
Florian Fainelli
29fd37780b switch to newer CS5535 GPIO driver, patch from Philip Prindeville 
SVN-Revision: 25631
 2011-02-20 19:59:29 +00:00
Florian Fainelli
8d7ca65dab add two solos-releated patches from Philip Prindeville 
SVN-Revision: 25630
 2011-02-20 19:59:25 +00:00
Florian Fainelli
d3c2b87213 update to 2.6.32.29 
SVN-Revision: 25583
 2011-02-19 12:44:23 +00:00
Jo-Philipp Wich
49057274ff geos: preconfig fix 
SVN-Revision: 25255
 2011-01-30 21:07:39 +00:00
Felix Fietkau
5571acdbd0 x86/soekris: Add defconfig for soekris net4801 and net4826 
Add default config file for net4801 and 4826 and initial script
to copy config file like it is done for other platforms.

Patch from: kentarou matsuyama <matsuyama@thinktube.com>

SVN-Revision: 25103
 2011-01-26 11:33:46 +00:00
Felix Fietkau
3d9d5cee8a x86/soekris: Add script to detect soekris model 
Add script to detect soekris board of net4801 and net4826.

Patch from: kentarou matsuyama <matsuyama@thinktube.com>

SVN-Revision: 25102
 2011-01-26 11:33:42 +00:00
Imre Kaloz
2821101c92 platform specific patches don't belong here - take #2 
SVN-Revision: 25085
 2011-01-24 12:11:25 +00:00
John Crispin
275c33c6f8 * Make sure that Geos baud-rate defaults correctly Changeset 23414 somehow got reordered. The unconditional default trumps later settings. 
contributed by Philip Prindeville

SVN-Revision: 25068
 2011-01-22 23:10:51 +00:00
John Crispin
079ba5ac14 * adds sane default uci environment * adds sane default package selection 
contributed by Philip Prindeville

SVN-Revision: 25065
 2011-01-22 22:43:51 +00:00
Daniel Dickinson
cc7e8eabb1 Missing symbols for CONFIG_xxx .. Thanks Philip Prindeville 
SVN-Revision: 25031
 2011-01-17 05:49:02 +00:00
Hauke Mehrtens
b8ab3d34eb kernel: update kernel versions Update kernel 2.6.32.26 to 2.6.32.27 Update kenrel 2.6.36.1 to 2.6.36.2 
SVN-Revision: 24486
 2010-12-11 16:07:21 +00:00
Imre Kaloz
ead8ab8403 update to the latest stable kernels 
SVN-Revision: 24136
 2010-11-24 18:50:11 +00:00
Imre Kaloz
809943774d move x86 back to .32 for now 
SVN-Revision: 24085
 2010-11-22 12:58:31 +00:00
Imre Kaloz
4052849677 switch from ext2 to ext4 (w/o) journaling 
SVN-Revision: 24084
 2010-11-22 12:12:39 +00:00
Imre Kaloz
cca7066e73 additional Kconfig options for newer kernels 
SVN-Revision: 24081
 2010-11-22 11:34:45 +00:00
Imre Kaloz
5406906be1 we don't need microcode updates 
SVN-Revision: 24080
 2010-11-22 11:33:25 +00:00
Felix Fietkau
9bfd20a160 x86: add missing l1 cache shift change 
SVN-Revision: 24072
 2010-11-21 23:27:25 +00:00
Felix Fietkau
1a9b885c74 x86: turn off CONFIG_X86_GENERIC for geos and net5501 
CONFIG_X86_GENERIC obscures CONFIG_MGEODE_LX, etc. and causes it to use wrong cache-line size.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 24071
 2010-11-21 22:56:33 +00:00
Felix Fietkau
ba5296268c x86: refresh config, enable pci express support 
SVN-Revision: 24026
 2010-11-17 22:41:17 +00:00
Imre Kaloz
2f2442f323 x86 kernels target bzImage by default 
SVN-Revision: 23926
 2010-11-08 09:44:33 +00:00
Florian Fainelli
18fd669ef2 [x86 net5501: make kmod-leds-net5501 work 
Fixes dependencies, and properly labels the module as GPL (thanks, Felix!).

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 23922
 2010-11-08 07:31:40 +00:00
Florian Fainelli
b6e9f1dfe0 make targets provide their KERNELNAME 
SVN-Revision: 23919
 2010-11-08 07:31:25 +00:00
Florian Fainelli
60c6d33e00 net5501: Add features to net5501 and remove HID support (unneeded) 
Since the net5501 doesn't have a VGA port, it doesn't need HID support either --
 all console access will be over a serial port.

Also add FEATURES to it as well.

Signed-of-by: Philip Prindeville <philip@redfish-solutions.com>

SVN-Revision: 23916
 2010-11-07 20:37:40 +00:00
Imre Kaloz
0a5da348d1 update kernels to 2.6.32.25 and 2.6.35.8 
SVN-Revision: 23851
 2010-11-04 09:01:08 +00:00
Florian Fainelli
b013e4eec4 add kmod-leds-net5501 
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 23729
 2010-10-30 22:35:59 +00:00
Florian Fainelli
eace922392 resync config-default, enable gpio support 
SVN-Revision: 23727
 2010-10-30 22:35:50 +00:00
Florian Fainelli
88eadf541f add required symbols to allow building of 2.6.35.7 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 23594
 2010-10-23 18:56:19 +00:00
Florian Fainelli
a6873b3095 Use -pipe for net5501 and geos CFLAGS, same as all of the other platforms 
Makes the builds run slightly faster on multicores.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 23495
 2010-10-17 12:42:06 +00:00
Alexandros C. Couloumbis
e37cba7e95 target/linux: fix Geos baudrate. (thank you Philip Prindeville) 
SVN-Revision: 23414
 2010-10-12 15:27:34 +00:00
Jo-Philipp Wich
2bda5979ab Geos -- new x86 subtarget definition This defines the Geos platform from Traverse Technologies in AUS. 
This is a Geode LX800 with 512MB of DDR400 memory, 2 8139CP interfaces, 2 Solos ADSL2+ interfaces, USB, serial console, CF slot, and miniPCI slot.

I'll add support for the LEDs separately.

Signed-off-by: Philip A. Prindeville

SVN-Revision: 23390
 2010-10-10 22:48:33 +00:00
Imre Kaloz
5f9a6a5431 upgrade kernel versions to the latest stable ones 
SVN-Revision: 23219
 2010-10-04 10:40:41 +00:00
Felix Fietkau
19723d09c2 x86: turn on optimizations for net5501 (patch by Philip A. Prindeville) 
SVN-Revision: 23104
 2010-09-20 22:14:07 +00:00
Jo-Philipp Wich
7ec18378a7 add kvm_guest to subtarget list 
SVN-Revision: 23056
 2010-09-13 17:00:37 +00:00
Jo-Philipp Wich
7d045509fd adjust image defaults for KVM 
SVN-Revision: 22950
 2010-09-06 02:31:37 +00:00
Jo-Philipp Wich
8ce034b36a x86: add kvm_guest subtarget Add a KVM guest subtarget to the x86 target. Since VirtIO is the preferred I/O virtualization platform for kvm, this target expects it's root device to be /dev/vda. 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 22944
 2010-09-05 23:18:51 +00:00
Florian Fainelli
b1becffa5b update to 2.6.32.20 
SVN-Revision: 22766
 2010-08-22 17:07:37 +00:00
Andy Boyett
0f5d0f69ab image: use internal qemu-img for vmdk and vdi images drop host dependencies on qemu-utils and VirtualBox 
SVN-Revision: 22553
 2010-08-09 04:22:39 +00:00
Jo-Philipp Wich
947519fae0 add missing symbols for 2.6.35 
SVN-Revision: 22503
 2010-08-06 01:33:23 +00:00
Imre Kaloz
ca8f45b142 update kernel versions 
SVN-Revision: 22289
 2010-07-19 11:34:03 +00:00
Felix Fietkau
816a9b30f6 x86: build fully functional images on Mac OS X, now that grub is fixed 
SVN-Revision: 21609
 2010-05-28 19:48:21 +00:00
Nicolas Thill
e74e289fa8 update linux kernel to 2.6.32.14 
SVN-Revision: 21583
 2010-05-27 18:09:09 +00:00
Nicolas Thill
46e2eea1ef target/linux: refresh 2.6.32 patches 
SVN-Revision: 21566
 2010-05-24 20:35:46 +00:00
Hauke Mehrtens
b18a1d217b kernel: update kernel to version 2.6.32.13 and 2.6.33.4 
SVN-Revision: 21540
 2010-05-23 13:16:51 +00:00
Nicolas Thill
2c82cf966c image/x86: fix typo when building on Mac OS X (closes: #7303) 
SVN-Revision: 21401
 2010-05-08 12:46:25 +00:00
Nicolas Thill
d0773b2356 target/x86: cleanup image config options 
SVN-Revision: 21365
 2010-05-05 02:11:15 +00:00
Nicolas Thill
482ee200cb target/x86: use common config items for options shared between generic and olpc targets 
SVN-Revision: 21364
 2010-05-05 02:07:38 +00:00
Nicolas Thill
5403c59f57 images: rename CONFIG_TARGET_ROOTFS_FSPART to CONFIG_TARGET_ROOTFS_PARTSIZE 
SVN-Revision: 21362
 2010-05-05 01:52:54 +00:00
Nicolas Thill
3bca4b2094 package/grub: build a host grub and a target grub (#7269) - use the host grub binary for grub install, but with target stage files - disable SSP (-fno-stack-protector) & Compile Time Buffer Checks (-U_FORTIFY_SOURCE) if appropriate - create a target grub package 
SVN-Revision: 21305
 2010-05-02 17:32:25 +00:00
Nicolas Thill
a64f53f482 target/x86: add to changes missed from [21246] preventing .vdi & .vmdk image generation 
SVN-Revision: 21277
 2010-04-30 18:43:39 +00:00