Commit graph

720 commits

Author SHA1 Message Date
Rafał Miłecki
76811de003 brcm47xx: support SPROM/NVRAM prefixes
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44855
2015-03-17 07:07:17 +00:00
Rafał Miłecki
917fb76321 brcm47xx: rename (and refresh) MTD patch for safety "nvram" partition
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44854
2015-03-17 07:07:00 +00:00
Rafał Miłecki
8f63c1405f brcm47xx: switch to 3.18
Tested on BCM5357B0, BCM47186B0 and BCM4706.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44853
2015-03-16 23:05:43 +00:00
John Crispin
d15ac306fa kernel: move KERNFS to generic config
KERNFS symbol is selected by SYSFS, so place it in generic config.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44615
2015-03-06 07:56:47 +00:00
John Crispin
f04a268a04 kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED
Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since
only one platfrom (omap) needs them.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44614
2015-03-06 07:56:34 +00:00
John Crispin
7886cced18 kernel: remove GENERIC_NET_UTILS from platform configs
CONFIG_GENERIC_NET_UTILS is selected by CONFIG_NET and already enabled
in generic config, so we don't need this symbol in platform specific
configurations.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44611
2015-03-06 07:55:57 +00:00
Jonas Gorski
3069934e37 brcm47xx, brcm63xx: disable CONFIG_MIPS_O32_FP64_SUPPORT
The flag is experimental and requires toolchain support, which we don't
provide. Also neither target has an FPU so it becomes meaningless
without the FPU emulator enabled.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44584
2015-03-01 11:37:18 +00:00
Rafał Miłecki
6296b8ca9f kernel: backport queued bcm47xxpart changes
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44156
2015-01-27 22:08:14 +00:00
Rafał Miłecki
3bdf05441a brcm47xx: backport BCM47XX arch patches (clean NVRAM code, later init)
SVN-Revision: 43979
2015-01-16 12:48:27 +00:00
Rafał Miłecki
81b8d95f2c brcm47xx: support for flashing CHK and CyberTAN images
This will allow simple sysupgrade-s including simpler reverting to the
original firmware.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43799
2014-12-30 17:19:36 +00:00
Rafał Miłecki
cca3990b16 brcm47xx: verify if CHK/CyberTAN contains valid TRX
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43798
2014-12-30 17:19:02 +00:00
Rafał Miłecki
c3e9796cd5 brcm47xx: extract magics from specific upgrade images (and still reject them)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43718
2014-12-15 11:09:14 +00:00
John Crispin
019ea725aa add "preinit_regular" diag.sh set_state argument
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
Rafał Miłecki
a5b6b7e419 brcm47xx: detect (and still reject for now) CyberTAN fw format
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43714
2014-12-15 09:59:44 +00:00
Rafał Miłecki
b5b4bdc066 brcm47xx: use separated function in upgrade to detect file type
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43708
2014-12-15 08:51:14 +00:00
Rafał Miłecki
73237c0c9b brcm47xx: add WNDR3400 V3 buttons
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43579
2014-12-08 17:02:28 +00:00
Felix Fietkau
9a495f6bbb kernel: refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43564
2014-12-08 12:04:25 +00:00
Hauke Mehrtens
563f963b1b kernel: refresh patches for kernel 3.18
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43536
2014-12-07 16:12:44 +00:00
Hauke Mehrtens
8e738da02c brcm47xx: remove kernel 3.10
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43535
2014-12-07 15:34:28 +00:00
Rafał Miłecki
1020b84266 brcm47xx: add early support for WNDR3400 V3
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43532
2014-12-07 00:58:40 +00:00
Rafał Miłecki
c84fe94b0d brcm47xx: add support for Netgear WGR614 V10
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43336
2014-11-20 22:15:21 +00:00
Rafał Miłecki
ac7e0e69bb brcm47xx: mtd: bcm47xxpart: lower minimal blocksize to 4Ki (from 64Ki)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43322
2014-11-19 17:35:24 +00:00
Hauke Mehrtens
a69ebe234d kernel: update kernel 3.18 to rc4
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43229
2014-11-10 22:51:30 +00:00
Hauke Mehrtens
e30531cd67 brcm47xx: add config for kernel 3.18
This adds a kernel config for kernel 3.18

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43140
2014-10-31 23:54:33 +00:00
Rafał Miłecki
0100a8a68e brcm47xx: initial support for kernel 3.18
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43100
2014-10-28 10:26:00 +00:00
Felix Fietkau
c288d2d6d9 kernel: makefiles: make use of new var KERNEL_PATCHVER
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43047
2014-10-24 19:34:02 +00:00
John Crispin
20940138ac scripts: fix wrong usage of '==' operator
[base-files] shell-scripting: fix wrong usage of '==' operator

normally the '==' is used for invoking a regex parser and is a bashism.
all of the fixes just want to compare a string. the used busybox-ash
will silently "ignore" this mistake, but make it portable/clean at least.

this patch does not change the behavior/logic of the scripts.

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 42911
2014-10-14 12:21:11 +00:00
Rafał Miłecki
746b80f166 brcm47xx: image: create initramfs TRX nodictionary images
Signed-off-by: Stephen Parry <sgparry@mainscreen.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42889
2014-10-13 05:53:33 +00:00
Luka Perkov
02629d8f87 kernel: update 3.14 to 3.14.18
Targets were build tested and patches are refreshed.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42463
2014-09-10 21:40:19 +00:00
Hauke Mehrtens
4a9acacf53 kernel: 3.14: update bcm47xxpart
It it used by brcm47xx and bcm53xx targets, so put patches in generic.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42212
2014-08-18 21:57:54 +00:00
Hauke Mehrtens
09739f8ba5 brcm47xx: image: build alternative TRX using less optimized LZMA
There is a group of devices that lzma-loader doesn't work with. They
simply hang at "Starting program at 0x80001000" which is really hard to
debug and we didn't find any solution for this for years.

Broadcom doesn't use lzma-loader on these devices anyway. They decided
to drop lzma-loader and use less optimal LZMA compression that can be
handled by CFE itself (it doesn't use dictionary).

So support these devices we will need kernel compressed with different
parameters and trx without a loader.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42205
2014-08-18 21:00:55 +00:00
Hauke Mehrtens
32b3f9cdc6 brcm47xx/bcm53xx: improve description
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42204
2014-08-18 20:29:26 +00:00
Hauke Mehrtens
ade7d7ba8c brcm47xx: update to kernel 3.14
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42202
2014-08-18 20:28:21 +00:00
Hauke Mehrtens
ba0b904d0b brcm47xx: image: update list of Netgear WNR* firmwares
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42165
2014-08-14 21:22:17 +00:00
Hauke Mehrtens
254b4df66f brcm47xx: fix brcm47xx.legacy build
we should check for ssb here.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42164
2014-08-14 21:21:27 +00:00
Hauke Mehrtens
47bab2b654 brcm47xx: fix reboot problem on BCM4705/BCM4785
This adds some code based on code from the Broadcom GPL tar to fix the
reboot problems on BCM4705/BCM4785. I tried rebooting my device for ~10
times and have never seen a problem. This reverts the changes in the
previous commit and adds the real fix as suggested by Rafał.

Setting bit 22 in Reg 22, sel 4 puts the BIU (Bus Interface Unit) into
async mode.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42088
2014-08-08 23:10:16 +00:00
Hauke Mehrtens
81c2466381 brcm47xx: fix reboot problem on BCM4705/BCM4785
This adds some code based on code from the Broadcom GPL tar to fix the
reboot problems on BCM4705/BCM4785. I tried rebooting my device for ~10
times and have never seen a problem. This reverts the changes in the
previous commit and adds the real fix as suggested by Rafał.

Setting bit 22 in Reg 22, sel 4 puts the BIU (Bus Interface Unit) into
async mode.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42083
2014-08-08 22:52:28 +00:00
Hauke Mehrtens
c371e6de02 brcm47xx: activate high mem for mips74k in the config
It is still not working.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42054
2014-08-07 20:22:00 +00:00
Hauke Mehrtens
4ec288bfa4 brcm47xx: 3.14: backport MIPS patches for early HIGHMEM support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42053
2014-08-07 20:21:11 +00:00
Hauke Mehrtens
dc38211cff brcm47xx: 3.10: backport MIPS patches for early HIGHMEM support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42052
2014-08-07 20:20:38 +00:00
Hauke Mehrtens
f7b3b7db7d brcm47xx: 3.14: update MIPS patches with versions sent upstream
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41911
2014-07-31 21:42:59 +00:00
Hauke Mehrtens
3a82681e4f brcm47xx: 3.10: update MIPS patches with versions sent upstream
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41910
2014-07-31 21:40:38 +00:00
Hauke Mehrtens
7a3b3b9d73 brcm47xx: don't create named switch_vlan sections
It doesn't seem to be used anywhere, it's incompatible with other
targets and can be confusing. People may think they need to update
section name every time they change VLAN ID (well, even I was doing
that).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41835
2014-07-26 12:33:48 +00:00
John Crispin
ba63338d3f kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41776
2014-07-20 17:31:11 +00:00
Hauke Mehrtens
7435b628c6 brcm47xx: fix switch detection with kernel 3.14
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41706
2014-07-17 20:34:18 +00:00
Hauke Mehrtens
1636bc6704 brcm47xx: remove kmod-bgmac from profile
bgmac will be compiled into the kernel since r41594.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41667
2014-07-15 21:57:13 +00:00
Hauke Mehrtens
f5955c2e6b brcm47xx: fix LEDs on WRT54GL 1.1
Ticket: #17062
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41666
2014-07-15 21:54:38 +00:00
Hauke Mehrtens
6f417d5b4b brcm47xx: fix special board handling for some devices
Some devices were renamed when converted from diag to in kernel board detection and it was not changed in netconfig. Devices not in the
kernel board detection are removed now.

This should close: #17111, #16968, #13202

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41663
2014-07-14 22:16:19 +00:00
Hauke Mehrtens
7dbea92a9c brcm47xx: improve board detection for some devices
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41662
2014-07-14 22:03:59 +00:00
Hauke Mehrtens
ba54356d49 brcm47xx: deactivate ssb and old phy code for new devices
This deactivates ssb and G-PHY code in b43 for the mips74k profile in
brcm47xx.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41594
2014-07-12 15:39:31 +00:00