Commit graph

14448 commits

Author SHA1 Message Date
John Crispin
208ab54e3e brcm2708: add linux 4.1 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46399
2015-07-17 12:48:39 +00:00
John Crispin
03b56c9350 brcm2708: split target config into subtargets
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46398
2015-07-17 12:48:11 +00:00
John Crispin
623da91e4d brcm2708: remove unneeded base-files
Device tree exports board name/model and device LEDs.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46397
2015-07-17 12:48:02 +00:00
John Crispin
8ef50ec40b brcm2708: improve profiles and image generation
- Add profiles for bcm2708 subtarget.
- Check subtarget for image generation.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46396
2015-07-17 12:47:50 +00:00
Jonas Gorski
4981c7da0d brcm63xx: make use of dt-includes
Now that we have a dtc command that invokes the preprocessor, make use
of it and replace the magic numbers with KEY_* defines.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46391
2015-07-16 11:15:02 +00:00
Jonas Gorski
71e0bd0165 brcm63xx: make use of the new BuildDTB command
Now that we have a BuildDTB command, make use of it instead of calling
dtc directly.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46390
2015-07-16 11:13:47 +00:00
Jonas Gorski
491cfb06d0 brcm63xx: HG553 buttons support
This patch adds buttons support for Huawei EchoLife HG553.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46388
2015-07-16 11:12:41 +00:00
Jonas Gorski
730f06410e brcm63xx: switch to 4.1
Switch brcm63xx to 4.1 to give it some initial testing, but keep 3.18
at least until CC-final is out.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46386
2015-07-15 14:42:04 +00:00
Felix Fietkau
b04b1ca933 ar8216: add swconfig attributes for ARL table flushing
Add swconfig attributes for flushing the ARL table globally or per port.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 46382
2015-07-15 08:17:42 +00:00
Felix Fietkau
33b72b8e0f ar8216: adjust ATU flushing in case of link changes
If a link goes down, don't flush the complete ARL table.
Only flush the entries for the respective port.
Don't touch ARL table if a link goes up.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 46381
2015-07-15 08:17:36 +00:00
Felix Fietkau
00e599b0b7 ar8216: add ARL table flushing per port
Adds functions for flushing ARL table entries per port.

Successfully tested on AR8327. Implementation for AR8216/AR8236/AR8316
is based on the AR8236 datasheet and assumes that the three chips
share a common ATU register layout.
Compile-tested only for AR8216/AR8236/AR8316.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 46380
2015-07-15 08:17:28 +00:00
Felix Fietkau
2666403c3a ar8216: add reading ARL table for AR8216/AR8236/AR8316
Adds the chip-specific part of reading ARL table for AR8216/AR8236/AR8316.

It's based on the AR8236 datasheet and compile-tested only as I couldn't
find datasheets for AR8216/AR8316 and don't own devices with these chips.

The existing ar8216_atu_flush implementation was used for all three
chip types, therefore I guess they share a common ATU register layout.

More testing would be appreciated.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 46379
2015-07-15 08:17:23 +00:00
Hauke Mehrtens
e06f6ae640 adm5120: do not config something as module
All modules should be build by a package and only selected by such a
package. Remove all the config options selected as module and also
refresh the config.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46372
2015-07-14 20:52:18 +00:00
Hauke Mehrtens
60cecc6fa5 bcm53xx: fix usb3 build with kernel 4.1
One argument was removed with kernel 4.1 from xhci_handshake() which
caused a compile error.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46369
2015-07-14 18:51:23 +00:00
John Crispin
94ef06a8c2 brcm2708: partially revert r46347 to fix sysupgrade
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46367
2015-07-14 16:24:10 +00:00
John Crispin
4a1021de87 x86: add kmod-acpi-button and kmod-button-hotplug to default packages
Since r40909 openwrt can automatically shutdown when you press the
power button or try to shutdown a kvm virtual machine.
When booting a recent CC-rc2 or trunk image, it doesn't work,
as two kernel modules are missing.

Add these two kernel modules to the default packages, so users
don't need to install them manually.

Signed-off-by: Stefan Hellermann <stefan@the2masters.de>

SVN-Revision: 46366
2015-07-14 16:24:02 +00:00
Rafał Miłecki
cf93a8f227 bcm53xx: add early support for Netgear R7000
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46363
2015-07-14 10:25:46 +00:00
John Crispin
096b3759a9 build: Prevent more gzip timestamps
To improve reproducibility, prevent the inclusion of timestamps
in the gzip header.

Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>

SVN-Revision: 46361
2015-07-14 09:57:45 +00:00
John Crispin
5e1c7fb0cc ramips: added gpio spi refclk support for wrtnode board
This syncs the dts file with the one provided by the wrtnode team:
https://github.com/WRTnode/openwrt-patches/blob/master/R41508/wrtnode_factory_firmware_dts.patch

Signed-off-by: Christian Mehlis <christian@m3hlis.de>

SVN-Revision: 46359
2015-07-14 09:57:08 +00:00
John Crispin
16fb050055 gemini: switch to 4.1
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 46354
2015-07-14 07:43:33 +00:00
John Crispin
d5d3b5e49c gemini: add 4.1 support
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 46353
2015-07-14 07:43:10 +00:00
John Crispin
023b0e0b38 gemini: add NAS packages to Raidsonic profile
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 46352
2015-07-14 07:42:18 +00:00
John Crispin
ea5b09bda3 gemini: copy kernel image to BIN_DIR
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 46351
2015-07-14 07:41:43 +00:00
John Crispin
1aca6e6b27 ramips: added led support for wrtnode board
This syncs the dts file with the one provided by the wrtnode team:
https://github.com/WRTnode/openwrt-patches/blob/master/R41508/wrtnode_factory_firmware_dts.patch

Signed-off-by: Christian Mehlis <christian@m3hlis.de>

SVN-Revision: 46350
2015-07-14 07:41:19 +00:00
John Crispin
b618573815 ramips: adding support for OY-0001 Wireless Router
Adding support for OY-0001 Wireless Router.
OY-0001 is a wireless router made by oyewifi.com. Below is the details:
MT7620A, 128MB DDR2, 16MB FLASH, SD Slot, USB 2.0, 4 x LAN + 1 x WAN.

Signed-off-by: Tom Deng <2579131212@qq.com>

SVN-Revision: 46349
2015-07-14 07:40:22 +00:00
John Crispin
0ac2ef13f7 ramips: mt7620 ArcherC20i USB support
USB port of TP-Link Archer C20i does not work with trunk and CC.
This patch adds two nodes (ehci and ohci) to the device tree enabling USB.

Signed-off-by: Gunnar Thorburn <gunnar@thorburn.se>

SVN-Revision: 46348
2015-07-14 07:39:19 +00:00
John Crispin
2de7910102 brcm2708: Implement sysupgrade
Implement sysupgrade for Raspberry Pi, similar to the way it is done on x86:
The config files are saved in the boot partition and moved to where they are
normally expected in preinit.

Also add optional gzip compression for the SD card image, since this can save
a lot of space (76M vs 6M), also similar to x86.

Signed-off-by: Bruno Randolf <br1@einfach.org>

SVN-Revision: 46347
2015-07-14 07:39:10 +00:00
John Crispin
1b73796895 kernel: fix build with CONFIG_MTD unset
Fixed typo in the patch provided by Hauke:
https://lists.openwrt.org/pipermail/openwrt-devel/2015-July/034274.html

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46346
2015-07-14 07:38:47 +00:00
John Crispin
a9b06a49a8 generic: add missing symbol
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46345
2015-07-14 07:38:33 +00:00
John Crispin
c40f94b0d0 brcm2708: add DT support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46344
2015-07-14 07:37:29 +00:00
John Crispin
1eccdb4fd4 ar71xx: add support for the devolo dLAN pro 1200+ WiFi ac
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>

SVN-Revision: 46342
2015-07-14 07:37:03 +00:00
John Crispin
052f21de3b ar71xx: add support to use gpio irqs
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>

SVN-Revision: 46339
2015-07-14 07:34:31 +00:00
John Crispin
02984a6e09 ar71xx: add support for the devolo dLAN pro 500 Wireless+
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>

SVN-Revision: 46338
2015-07-14 07:32:33 +00:00
Hauke Mehrtens
e914c31d4c x86: Make virtualization guests built for pentium4 with SMP
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 46314
2015-07-12 19:26:48 +00:00
Hauke Mehrtens
29039f51b3 kernel: refresh patches on linux 3.18
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46308
2015-07-12 13:47:16 +00:00
Hauke Mehrtens
fde2caf6fd sunxi: enable CONFIG_EXPERT
- only sunxi has this disabled
- unify kernel configuration across platforms

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46307
2015-07-12 12:14:02 +00:00
Hauke Mehrtens
56597e059d kernel: add missing config option
This should fix build of sunxi.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46304
2015-07-12 10:51:28 +00:00
Hauke Mehrtens
7c7e5c4276 mvebu: make patches apply against 3.18.18 again
commit r46299 broke the mvebu target because one patch does not apply
any more. This commit closes #20070.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46303
2015-07-12 10:38:54 +00:00
Hauke Mehrtens
763e2502b6 kernel: update 4.1 to 4.1.2
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.2

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46301
2015-07-11 19:59:26 +00:00
Hauke Mehrtens
e0402257e5 kernel: update 4.0 to 4.0.8
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.8

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46300
2015-07-11 19:59:05 +00:00
Hauke Mehrtens
58b66cdd75 kernel: update 3.18 to 3.18.18
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.18

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46299
2015-07-11 19:58:44 +00:00
Felix Fietkau
1e6479aa87 ramips: collect rx related members to fe_rx_ring struct
Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 46295
2015-07-10 19:41:48 +00:00
Felix Fietkau
279be7be09 ramips: add xmit_more support
use pktgen to verify on rt3662. can improve transmit rate.
pkt_size 1500
burst 1 : 807Mb/sec
burst 8 : 984Mb/sec

pkt_size 60
burst 1 : 57Mb/sec
burst 8 : 236Mb/sec

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 46294
2015-07-10 19:41:42 +00:00
John Crispin
e8161f4764 ar71xx: compex wpe72 add space to include statement
Signed-off-by: Christian Mehlis <christian@m3hlis.de>

SVN-Revision: 46284
2015-07-09 07:04:14 +00:00
John Crispin
8a1cca04ca ar71xx: compex wpj531 register usb support
Signed-off-by: Christian Mehlis <christian@m3hlis.de>

SVN-Revision: 46283
2015-07-09 07:03:54 +00:00
John Crispin
3802ce01a9 ar71xx: compex wpj531 fix setting mac address on ethernet
Signed-off-by: Christian Mehlis <christian@m3hlis.de>

SVN-Revision: 46282
2015-07-09 07:01:55 +00:00
John Crispin
4b28adc066 ar71xx: compex wpj531 fix ethernet registration
In fb6f62e97733312053ab593fcf68eea47a21169e several settings
are set on the ethernet device, but they are not working.

Fix Ethernet by setting the right values.

Signed-off-by: Christian Mehlis <christian@m3hlis.de>

SVN-Revision: 46281
2015-07-09 06:59:18 +00:00
John Crispin
3b14473968 ar71xx: ag71xx remove IRQF_DISABLED
no-op since 2.6.35
removed in Kernel 4.1
see https://lwn.net/Articles/380931/

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46280
2015-07-09 06:57:39 +00:00
John Crispin
71db293eab mpc85xx: Enable RFKill and USB Power GPIO Control for WDR4900v1
This patch adds the RFKill GPIO control switch and enables another GPIO to
control power supply to USB Ports by emulating an LED GPIO for WDR4900v1.

Signed-off-by: Guo Wei Lim <alphasparc@gmail.com>

SVN-Revision: 46279
2015-07-09 06:56:45 +00:00
John Crispin
dc2c89c64c ar71xx: fix board name ordering
r46248 added case statements in the same places

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46274
2015-07-08 14:26:18 +00:00