Commit graph

3018 commits

Author SHA1 Message Date
Zoltan HERPAI
1f8585cf99 merge: ssid: update default ssid
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-12-08 19:41:18 +01:00
Felix Fietkau
98fb380d88 mt76: update to the latest version, fixes setting per-vif mac address
d02a05b mt7603: update firmware to version 20160107100755
4d4cd05 Partially revert "mt7603: use mcu command to set timing registers, fix OFDM timeout values"
170f334 mt76x2: remove MAC address limitation for multi-vif setups
3563b8f mt76x2: clean up MAC/BSSID address initialization
9de77e1 mt76x2: drop wiphy->addresses
a6a6e25 mt76x2: init: disable APCLI by default
c64633e mt76x2: configure rx filter based on monitor mode setting
ac815fa mt76x2: init: fix rx filter default value during init
e504656 mt7603: configure other-unicast drop based on monitor mode setting

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-12-08 17:58:05 +01:00
Felix Fietkau
04127f0fec mt76: update to the latest version, adds stability fixes
11f42a8 mt76x2: add channel argument to eeprom tx power functions
3bd7e76 mt76x2: initialize channel power limits
19fff41 mt76x2: convert between per-chain tx power and combined output
737cf2b mt7603: rename mt7603_mac_reset to mt7603_pse_reset
8026638 mt7603: rename MT_PSE_RESET register
c4dd32a mt7603: remove watchdog reset on interface stop
d99092b mt7603: remove WARN_ON_ONCE for workaround checks
c8807b4 mt7603: simplify PSE reset
d8a5990 mt7603: warn if PSE reset fails
c079960 mt7603: clean up dma debug reads
96817d6 mt7603: make mt7603_mac_watchdog_reset() static
e953c78 mt7603: clear wtbl PS bit for powersave responses
57a2e33 mt7603: set tx-skip flag for powersave clients
c8e5ab1 mt7603: initialize wtbl ps flag on station add
b4034cf mt76x2: remove some harmless WARN_ONs in tx status and rx path
8e17d36 mt7603: remove some harmless WARN_ONs in rx path

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-12-03 19:06:24 +01:00
Yousong Zhou
b59b799cb1 ltq-ifxos: fix compilation against glibc
Fixes FS#1196

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-11-30 14:53:16 +08:00
Felix Fietkau
e966ed236f mt76: update to the latest version, fixes encrypted mesh support and HT20 issues
fc28872 mac80211: add missing include
a4c82ca mt7603: add missing include required on newer kernels
792859b mt76x2: fix transmission of encrypted management frames
a51358e mt76x2: increase OFDM SIFS time

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-29 17:50:46 +01:00
Felix Fietkau
111b499024 mac80211: tweak TSQ settings
Latencies can be much higher on wifi devices, especially with
aggregation. Tune the network stack setting introduced in the previous
commit to account for that.
This commit reintroduces the previously reverted one with a fix for the
crash issues

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-29 17:46:41 +01:00
Felix Fietkau
47fa8654a1 Revert "mac80211: tweak TSQ settings"
This reverts commit 2dc485250d.
This patch needs some additional checks in order to avoid overwriting
unrelated fields for request sockets.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-28 14:23:43 +01:00
Daniel Engberg
38cc071ed1 mwlwifi: Update to latest commit in upstream repo
Update to latest commit in upstream repo
Bumps 88W8964 firmware to 9.3.0.8

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-11-25 20:11:30 +01:00
Fushan Wen
40868e3bb6 kmod-sched-cake: update to latest git HEAD
dfb2f6c pkt_sched: make compile again
5ab7026 sch_cake: make compile again
6f28803 codel5: make more checkpatch compliant
bd426aa Fix build error on 4.12
e4a3628 Whitespace tidy up

Signed-off-by: Fushan Wen <qydwhotmail@gmail.com>
2017-11-25 19:53:37 +01:00
Hauke Mehrtens
4e93ec1ad6 kernel: i2c-piix4: fix dependency on TARGET_x86
Fix the target dependency to make it possible to select this module also
on x86 target and its subtargets.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-11-22 22:37:15 +01:00
Hauke Mehrtens
9cfcd49735 kernel: e100: take e100 firmware from linux-firmware repository
The firmware directory in the Linux kernel was removed in kernel 4.14,
take the e100 firmware files now from the linux-firmware repository
instead. To do so create the new package e100-firmware. This will also
work with older kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-11-22 22:37:05 +01:00
Marcin Jurkowski
06e1b90404 kernel: add NFS4 client support
Adds NFS4 client support:
 1. Package kmod-fs-nfs is split into kmod-fs-nfs (nfs.ko) and
    kmod-fs-nfs-v3 (nfsv3.ko).
 2. A new package kmod-fs-nfs-v4 (nfsv4.ko) is created.
 3. Package kmod-fs-nfs-common-v4 is renamed to kmod-fs-nfs-rpcsec
    and includes additional module rpcsec_gss_krb5.ko.
    CONFIG_NFS_V4 goes into kmod-fs-nfs-v4, CONFIG_NFSD_V4 (NFS4
    server) is removed. Missing kernel module oid_registry.ko
    needed by auth_rpcgss.ko is added to the package.

A new package kmod-crypto-cts needed by rpcsec_gss_krb5.ko is
also created.

Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
[add dependency to kmod-crypto-ecb in fs-nfs-common-rpcsec]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-11-22 22:36:21 +01:00
Martin Schiller
0c78de869d kernel: add kmod-i2c-i801
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
[Add i2c-smbus.ko and fix target dependency]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-11-22 22:34:56 +01:00
Martin Schiller
7ffeecd6ac kernel: add it87-wdt watchdog timer module
The module parameters "nogameport=1" and "nocir=1" are needed,
because this is not supported on recent chips and doesn't
really tell if the system is stable.

As this features will already be removed in linux-4.13 or newer,
this module parameters can be removed in the future.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2017-11-22 20:49:04 +01:00
Mathias Kresin
298ade22a0 acx-mac80211: fix build on kernel 4.9
The DEFINE_PCI_DEVICE_TABLE macro was removed with upstream commit
7e9321599011 ("treewide: remove references to the now unnecessary
DEFINE_PCI_DEVICE_TABLE").

Use the pci_device_id struct to fix the acx-mac80211 build failure on
ramips.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-11-22 08:21:53 +01:00
Felix Fietkau
6a6dc94e0c mac80211: fix a race condition that could lead to a use-after-free on a timer
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-20 20:05:19 +01:00
Felix Fietkau
9247864b6e mac80211: fix netlink family id for nl80211 messages
Fixes responses for nl80211 calls

Reported-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-20 17:52:51 +01:00
John Crispin
b9e700cd58 kernel: fix lzo and lz4 modules
both of these have been split up and require additional ko files.

Signed-off-by: John Crispin <john@phrozen.org>
2017-11-20 13:10:57 +01:00
Luis Araneda
1c139d664b mac80211: enable brcmfmac's SDIO support on sunxi target
Needed to support some SDIO connected cards, like AMPAK modules

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2017-11-17 08:20:22 +01:00
Bjørn Mork
f922b0c191 kernel: pull edgeport firmware from linux-firmware repo
The kernel firmware/ is going away, so pull this firmware
from the linux-firmware git repo instead. No actual changes
to the installed files.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
2017-11-16 22:56:54 +01:00
Felix Fietkau
fa6fd45613 mt76: update to the latest version
Significantly improves throughput on MT76x2, fixes some stability
issues, adds LED support.

Changes:

266ef38 mt76x2: mcu: remove unused parameter in mt76x2_mcu_msg_alloc signature
758376d mt7603: mcu: remove unused parameter in mt7603_mcu_msg_alloc() signature
e764787 Fix errors found by cppcheck
a6fce8a mt7603: add LED definition registers
f658dd2 mt76x2: add LED register definitions
f6a021d mt76x2: Support using PCI ID as chip ID
c9bdcd8 mt76: add led support using mac80211 led framework
58e9138 mt76x2: init: add ma80211 led callbacks
8ea8da3 mt7603: init: add ma80211 led callbacks
ded88cd mt76x2: Add PCI identifier for MT7602
51a6764 mt7603: remove unnecessary mcu register read function
fbdbf65 debugfs: add support for changing the LED pin
cc02e49 mac80211: move DT led configuration to the "led" child node
e4e7734 mt76x2: limit client WCID entries to 0-127
60172cc mt76x2: clear drop flag for all WCIDs on init
d8140b6 mt76x2: clear per-WCID tx rate lookup register
0ce7923 mt76x2: add helper function for setting drop mask
ccc4baf mt76x2: clear drop mask when sending a PS response
ff60d14 mt76: increase rx ring size for mt76x2
b57ada5 mt76x2: add rx statistics registers
af425de mt76x2: fix LNA gain register annotation
efd7724 mt76x2: sync channel gain value with latest reference driver
4af37bd mt76x2: implement dynamic AGC tuning based on false packet detection count
70f2002 mt76x2: add more gain tuning based on the latest reference driver
8f1c8ab mt76x2: sync tx power related values with reference driver

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-16 20:33:37 +01:00
Felix Fietkau
2dc485250d mac80211: tweak TSQ settings
Latencies can be much higher on wifi devices, especially with
aggregation. Tune the network stack setting introduced in the previous
commit to account for that

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-16 15:23:55 +01:00
Felix Fietkau
f9fa266faf mac80211: update to wireless-testing 2017-11-01
The wireless regdb is now loaded via firmware loading, CRDA support and
built-in regdb support have been removed.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-16 15:23:35 +01:00
Jianhui Zhao
a8a23ca50c kernel: add packaging for mtdoops
Signed-off-by: Jianhui Zhao <jianhuizhao329@gmail.com>
2017-11-15 21:13:16 +01:00
Chris Blakely
6fe9090605 modules: Add kmod-ixgbevf kernel module for Intel(R) 10GbE Virtual Ethernet support
These adapters support SR-IOV. Thus the host can assign Virtual Functions
(VFs) to different VMs by the PCI-E Passthrough (e.g. VFIO for KVM), to
gain different advantages (performance, VF to VF communications, host
kernel offload, etc.).

Signed-off-by: Chris Blakely <cpblakely@gmail.com>
2017-11-15 21:11:23 +01:00
Felix Fietkau
d91494eedf hostapd: rework frequency/ht/vht selection for ibss/mesh
- Remove obsolete patch chunks regarding fixed_freq
- Instead of patching in custom HT40+/- parameters, use the standard
config syntax as much as possible.
- Use fixed_freq for mesh
- Fix issues with disabling obss scan when using fixed_freq on mesh

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-15 18:49:12 +01:00
Antonio Quartulli
0da54fa642 mac80211: don't pass the hostapd ctrl iface in adhoc
Passing the ctrl iface to wpa_supplicant will automatically cause wpa_supplicant
to send "STOP_AP" messages to the hostapd. This breaks the AP interfaces.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2017-11-15 18:49:12 +01:00
Jonas Gorski
dea3bad84e ltq-ptm: add missing depency to ltq-?dsl-*-mei
Add the required dependency to the mei driver as cought by the depenceny
checker.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-11-07 22:58:58 +01:00
Jonas Gorski
e76340198f ltq-atm: fix dependency for xrx200
Ad the missing dependency for the xrx200 variant, which depends on the
vdsl mei driver.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-11-07 22:58:58 +01:00
Jonas Gorski
a9a78a70cc ltq-adsl-mei: use the same file name for all variant
Due to limitations in the symvers treatment and the mei drivers
exporting the same funtions, modpost might use the wrong mei driver
to link against.

Work around this by renaming them all to the same name, making it
always the "right" module name even if the wrong file was used.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-11-07 22:58:58 +01:00
Jonas Gorski
ee59f8126f partially revert "mwlwifi: switch to AutoProbe"
Apearently we need to ensure mwlwifi loads before mwifiex on
the WRT3200ACM, else mwifiex will claim the wifi.

Fix this by reverting to AutoLoad, but keep the removal of
mac80211 line.

This partially reverts commit 471d5dc6e3.

Fixes: 471d5dc6e3 ("mwlwifi: switch to AutoProbe")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-11-07 22:58:58 +01:00
Denis Osvald
ee791fa4ab netfilter, iptables: add optional CHECKSUM module
Signed-off-by: Denis Osvald <denis.osvald@sartura.hr>
2017-11-06 16:39:41 +01:00
Marek Vasut
6d2f3b1b19 package: kernel: dtc: Add DTO support
Add patch with the DT overlay support into the DTC package.

Signed-off-by: Marek Vasut <marex@denx.de>
2017-11-06 16:39:41 +01:00
Mathias Kresin
8d3857a347 ath9k: unset the default LED pin if used by platform buttons
Unset the default LED gpio pin if the same gpio pin is used by a button
defined via platform button. It prevents the change of the GPIO value
on wireless up/down or wireless traffic.

Fixes: FS#1129

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-11-04 09:50:13 +01:00
Mathias Kresin
56189f1e32 ltq-atm: add missing dependency to kmod-ltq-adsl-*-mei
Commit 2e496876c6 fixed the generation of the depends line for external
kernel modules which makes it possible for the build system to
automatically detect this missing dependency.

This fixes the packaging of kmod-ltq-atm for the ar9, xway and
xway-legacy subtarget.

Fixes: FS#1124

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-11-03 20:04:40 +01:00
Jonas Gorski
5302abe745 acx-mac80211: allow compilation on 4.9
acx-mac80211 compiles fine with 4.9, so no reason to not allow it.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-10-29 23:41:00 +01:00
Jonas Gorski
c77ba7df09 ar7-atm: fix function signatures with expected ones
Newer kernels treat differing signatures an error, not just a warning,
so fix the signatures to match.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-10-29 23:41:00 +01:00
Jonas Gorski
fce2664f19 ar7-atm: fixup proc fixes
They were incomplete, so fix them to properly update the function signatures
to what is expected.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-10-29 23:41:00 +01:00
Jonas Gorski
889b21f954 ar7-atm: drop LINUX_VERSION tests
Minimum supported kernel is 3.18, so we don't need to test for anything
older. In addition, the API hasn't changed since then, so we don't need
to check for any kernel version at all.  This helps to keeps the amount
of changes more managable.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-10-29 23:41:00 +01:00
Hauke Mehrtens
1e5e005841 ltq-atm: Add missing dependency to kmod-ltq-adsl-ase-mei
Commit 2e496876c6 fixed the generation of the depends line for external
kernel modules which makes it possible for the build system to
automatically detect this missing dependency. This fixes the build bot
build of the lantiq/aes target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-29 17:01:26 +01:00
Karl Vogel
76378c6b9f build: use KERNEL_MAKE_FLAGS for kernel file compilations
The build system already defines KERNEL_CROSS which defaults to TARGET_CROSS.
Make use of this variable for kernel makefiles.

Signed-off-by: Karl Vogel <karl.vogel@gmail.com>
2017-10-29 16:17:05 +01:00
Jonas Gorski
471d5dc6e3 mwlwifi: switch to AutoProbe
Now that we have working module dependency generation, we can switch to
AutoProbe and let modprobe handle loading required modules.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-10-27 13:06:15 +02:00
Jonas Gorski
5df30a169c mt76: switch to AutoProbe
Now that we have working module dependency generation, we can switch to
AutoProbe and let modprobe handle loading required modules.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-10-27 13:06:15 +02:00
Jonas Gorski
3689f7c8ef mac80211: ath10k: switch to AutoProbe
Now that we have working module dependency generation, we can switch to
AutoProbe and let modprobe handle loading required modules.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-10-27 13:06:15 +02:00
Jonas Gorski
7eda0d2272 broadcom-wl: switch to AutoProbe
Now that we have working module dependency generation, we can switch to
AutoProbe and let modprobe handle loading required modules.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-10-27 13:06:15 +02:00
Jonas Gorski
5cee71904f broadcom-wl: reorder kmod build and pass EXTRA_VERSIONS
Reoder the build to build the glue module first and pass the glue module's
Module.symvers to the wl driver builds.

This allows modpost to properly store a wl_glue dependency in the driver.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-10-27 13:06:15 +02:00
Jonas Gorski
557e98ebcc broadcom-wl: define module directories
Define the module subdirs so our build system properly picks up the
Module.symvers.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-10-27 13:06:15 +02:00
Jonas Gorski
5172f799a3 ath10k-ct: switch to AutoProbe
Now that we have working module dependency generation, we can switch to
AutoProbe and let modprobe handle loading required modules.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-10-27 13:06:15 +02:00
Jonas Gorski
dd9df74dfa ath10k-ct: define module directories
Define the module subdir so our buildsystem properly picks up the
Module.symvers.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-10-27 13:06:15 +02:00
Jonas Gorski
70e7efb12f acx-mac80211: drop PKG_BUILD_DEPENDS
We already have a DEPENDS on mac80211, which should be enough to ensure
headers are available before build.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-10-27 13:06:15 +02:00