openwrtv4

Author	SHA1	Message	Date
Gabor Juhos	38fced86ee	base-files: add support for the morse LED trigger Write "delay" and "message" options to their respective files, allowing Morse code message configuration through UCI. The delay (dit length) defaults to 150ms (about 8 words per minute, suitable for beginners). Signed-off-by: Petr Viktorin <encukou@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34380	2012-11-25 17:20:49 +00:00
Florian Fainelli	5ae2524d3a	base-files: use a natural mount syntax Busybox built against musl-libc will choke on these otherwise, besides that it is more natural to use the filesystem type, then options, then name, then mountpoint. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34308	2012-11-23 20:02:02 +00:00
Florian Fainelli	d3f22617a2	base-files: skip LEDs handled by rssileds in led init-script Without this, /etc/init.d/led will try to set the non-existing 'rssi' trigger. This doesn't harm as the kernel will refuse this setting, but it outputs some ugly log-lines: Jun 24 10:15:19 OpenWrt user.info sysinit: setting up led RSSILOW Jun 24 10:15:19 OpenWrt user.info sysinit: sh: write error: Invalid argument ... In order to avoid this, skip LEDs with trigger = "rssi" in /etc/init.d/led Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33717	2012-10-11 06:45:02 +00:00
Imre Kaloz	c5e5e70ab0	it's time to break the barriers SVN-Revision: 33666	2012-10-08 13:12:37 +00:00
Felix Fietkau	c7c649126f	base-files: remove obsolete entries from sysctl.conf (#12236 ) SVN-Revision: 33532	2012-09-24 15:24:01 +00:00
Florian Fainelli	78f4cf3d70	base-files: release an attached loop device on umounting Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 33477	2012-09-19 15:13:44 +00:00
Jo-Philipp Wich	2165240c32	base-files: make file compare silent in migrate-sysctl SVN-Revision: 33449	2012-09-17 18:36:51 +00:00
Jo-Philipp Wich	0fd1fb6252	base-files: add uci-defaults script to migrate sysctl.conf (#12196 ) SVN-Revision: 33448	2012-09-17 17:15:56 +00:00
Jo-Philipp Wich	dac5ed38b6	base-files: remove route enabled check in lib/functions/network.sh after netifd bump SVN-Revision: 33391	2012-09-13 08:47:10 +00:00
Gabor Juhos	ca857b7a50	base-files: uci-defaults for rssileds Adds capability to add uci-defaults defining RSSI LEDs Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33164	2012-08-13 14:01:37 +00:00
Jo-Philipp Wich	70aaa116eb	base-files: provide a sysupgrade -r (--restore-backup) option as convenience wrapper for tar -C / -x(v)zf SVN-Revision: 33147	2012-08-12 13:20:27 +00:00
Jo-Philipp Wich	17dc1d5c44	base-files: fix option parsing of -F/--force parameter SVN-Revision: 33075	2012-08-09 18:30:47 +00:00
Florian Fainelli	31e46b4293	base-files: check for ldd presence and executability (#11991 ) SVN-Revision: 33057	2012-08-08 15:37:34 +00:00
Florian Fainelli	6afd1725f1	base-files: fix detection of standalone ldd When standalone ldd is selected in config the binary is installed in /usr/bin/ldd. Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 32891	2012-07-27 15:35:00 +00:00
Vasilis Tsiligiannis	9ab1df3f48	base-files: Modernize hotplug2 rules (#11368 ) SVN-Revision: 32711	2012-07-14 19:59:44 +00:00
Jo-Philipp Wich	ff3161a6c4	base-files: ensure that /sys is available during sysupgrade, some essential services like om-watchdog need it SVN-Revision: 32587	2012-07-03 15:43:43 +00:00
Jo-Philipp Wich	b2e5c5f82e	base-files: implement network_get_dnsserver() and network_get_dnssearch() in /lib/functions/network.sh SVN-Revision: 32531	2012-06-29 19:04:11 +00:00
Jo-Philipp Wich	e654014352	base-files: only consider enabled default routes when finding the wan iface (#11774 ) SVN-Revision: 32525	2012-06-29 11:58:35 +00:00
Felix Fietkau	6c2a295245	base-files: enable TCP timestamps, enable sack/dsack. (patch by Dave Täht) A year of testing in the cerowrt project shows not using timestamps to be a very bad idea in nearly any TCP at speeds above a few Mbit. Lastly sack/dsack help on recovery from larger amounts of packet loss. SVN-Revision: 32513	2012-06-27 22:32:44 +00:00
Jo-Philipp Wich	f2dde4f5ba	base-files: allow wireless ifaces to be part of multiple networks SVN-Revision: 32503	2012-06-26 15:25:33 +00:00
Jo-Philipp Wich	57a7257569	base-files: implement network_get_gateway(), network_get_gateway6(), network_find_wan() and network_find_wan6() in /lib/functions/network.sh SVN-Revision: 32397	2012-06-17 11:50:50 +00:00
Jo-Philipp Wich	bfe966574f	base-files: enable shell tracing in initscripts when INIT_TRACE is set SVN-Revision: 32340	2012-06-13 17:10:41 +00:00
Jo-Philipp Wich	9869b4da3c	base-files: implement network_defer_device() and network_ready_device() wrappers for upcoming netifd iface deferring support SVN-Revision: 32106	2012-06-07 14:55:26 +00:00
Jo-Philipp Wich	5e84df6bac	base-files: ship a static initial shadow db instead of creating it from passwd with sed, this fixes registering of users at compile time SVN-Revision: 32064	2012-06-05 17:48:41 +00:00
Jo-Philipp Wich	a044a43d06	base-files: make user_add() populate the shadow db as well SVN-Revision: 32063	2012-06-05 17:40:32 +00:00
Jo-Philipp Wich	9ae901445b	/etc/functions.sh => /lib/functions.sh SVN-Revision: 32062	2012-06-05 16:04:23 +00:00
Gabor Juhos	eca7502dfd	base-files: add LED specific functions to /lib/functions/uci-defaults SVN-Revision: 31991	2012-05-29 16:39:16 +00:00
Jo-Philipp Wich	c11151bc70	base-files: add network_is_up() SVN-Revision: 31978	2012-05-29 02:03:25 +00:00
Jo-Philipp Wich	bf52cbf108	base-files: let network_get_device() return the l3 interface, introduce network_get_physdev() to obtain the underlying iface (if applicable) SVN-Revision: 31960	2012-05-29 00:20:16 +00:00
Jo-Philipp Wich	8ef9450b37	base-files: add network_get_device() to network.sh SVN-Revision: 31937	2012-05-28 03:24:56 +00:00
Jo-Philipp Wich	f1d04190c5	base-files: introduce /lib/functions/network.sh This file will contain common procedures to deal with network interfaces. Initially provides network_get_ipaddr(), network_get_ipaddr6(), network_get_subnet() and network_get_subnet6() to determine the primary IP addresses or subnets of a given logical interface. SVN-Revision: 31935	2012-05-28 03:15:02 +00:00
Felix Fietkau	166db84309	base-files: kill ubusd and udhcpc on sysupgrade as well SVN-Revision: 31852	2012-05-23 21:54:12 +00:00
Felix Fietkau	5d6628a88c	base-files: allow sysupgrade to kill netifd, fixes pppd shutdown on upgrade SVN-Revision: 31851	2012-05-23 21:49:31 +00:00
Gabor Juhos	6aec1d72c2	package/base-files: copy /lib/functions.sh to the ramfs on sysupgrade SVN-Revision: 31842	2012-05-23 21:05:20 +00:00
Jonas Gorski	80650c9475	base-files: wait for wifi modules to settle On slower devices wifi drivers might take too long for detecting devices, resulting in the wifi detect call not seeing them. This was observed on a bcm6348 with bcm4318 wifi. Adding a one second pause was enough for b43 to expose the device. SVN-Revision: 31639	2012-05-06 21:25:42 +00:00
Florian Fainelli	129afe12b7	base-files: fix typo in 05_firstboot_skip script (#11359 ) SVN-Revision: 31492	2012-04-27 16:49:16 +00:00
Felix Fietkau	3678ba60ca	base-files: rename internal variables in config_foreach to make namespace conflicts more unlikely SVN-Revision: 31431	2012-04-21 20:34:45 +00:00
Jo-Philipp Wich	3c4165a305	enable ntpd server for busybox hi Another version, in this one the enable_server option is in the timeserver ntp part of the "system" config file You can patch trunk and bacfire (tested both) You can put busybox ntpd in client mode (if you put server), in client & server (by putting enable_server to 1, ntpd listen to udp 123), and also in server mode only (if you didn't put any servers in the config and still put enable_server 1, ntpd will answer with the time of the router) I've replaced "config_foreach getpeers timeserver" with "config_get peers ntp server" because we want ntp timeserver, not random ones (to pre-answer if someone want to say that it's intrusive ...) Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr> Le 27/03/2012 20:41, Etienne Champetier a écrit : > I've now tested my trunk patch and it works fine > But I still can't find were $PROG is defined (is this a mistake, or some sort of built in variable???) > (I've made some grep and nothing) > > Le 23/03/2012 02:19, Philip Prindeville a écrit : >> Maybe: >> >> [ -n "$PROG" -a -x "$PROG" ] \|\| return 1 >> >> instead? >> >> >> On 3/22/12 4:34 PM, Etienne Champetier wrote: >>> Hi >>> >>> The 2 attached patchs (trunk & bacfire) add busybox ntpd enable_server option, as busybox ntpd server is compiled by default. >>> We only need 1 client/server daemon (olipro patch was launching 2 daemons) >>> I've fully tested the bacfire patch, and as i don't have a running openwrt trunk i'm not sure for the trunk patch (i'm sure about my modifications, but i'm not sure about "[ -x $PROG ] \|\| return 1", as "$PROG" isn't defined ?!) >>> >>> Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr> >>> >>> >>> Le 16/01/2012 01:57, Philip Prindeville a écrit : >>>> On 1/14/12 11:37 AM, Olipro wrote: >>>>> On Saturday 14 Jan 2012 02:45:59 Philip Prindeville wrote: >>>>>> Don't we already have a 'disabled' option? Now we're adding an >>>>>> 'enable_server' option? >>>>>> >>>>>> That seems confusing for no useful reason. >>>>>> >>>>> have you bothered to read what I originally wrote? your response would make >>>>> me inclined to believe that you didn't. >>>>> >>>>> currently the ntpd initscript only runs it as a CLIENT - this patch enables >>>>> you to have one instance running as a client and another as a SERVER that >>>>> other hosts can synchronise with. >>>>> >>>>> Or perhaps I'm misunderstanding, what would you propose for allowing the >>>>> built-in busybox ntpd to be utilised as a server? a separate init script >>>>> entirely perhaps? >>>> Or separate config sections... instead of 'config ntp' have 'config ntp-server' and 'config ntp-client'. >>>> >>>> -Philip >>>> >>>> >>>> _______________________________________________ >>>> openwrt-devel mailing list >>>> openwrt-devel@lists.openwrt.org >>>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel SVN-Revision: 31374	2012-04-20 15:05:38 +00:00
Jo-Philipp Wich	b4312a8ba1	base-files: reformat banner to better work with varying version string lengths, do not set image options if menu is disabled (#11280 ) SVN-Revision: 31289	2012-04-15 15:21:55 +00:00
Jo-Philipp Wich	a43ae30e1b	include, base-files, opkg: introduce version configuration to override the embedded version info of generated images - Introduce new Kconfig symbols VERSION_DIST, VERSION_NICK, VERSION_NUMBER and VERSION_REPO to specify distribution, release name, version and repository for a given build - Introduce include/version.mk to provide common helpers for packages dealing with versions - Make opkg use version.mk to populate the opkg.conf template - Make base-files use version.mk to populate /etc/openwrt_version, /etc/openwrt_release and /etc/banner The available placeholders are: %D .. Replace with $(CONFIG_VERSION_DIST), default to "OpenWrt" %d .. Like %D, but all characters made lowercase and spaces substituted with "_" (e.g. "openwrt") %N .. Replace with $(CONFIG_VERSION_NICK), default to the build tree release (e.g. "Attitude Adjustment") %n .. Like %N, but all characters made lowercase and spaces substituted with "_" (e.g. "attitude_adjustment") %V .. Replace with $(CONFIG_VERSION_NUMBER), default to the build tree release (e.g. "r31262") %v .. Like %V, but all characters made lowercase and spaces substituted with "_" %C .. Replace with $(CONFIG_VERSION_NUMBER), default to "Bleeding Edge" %c .. Like %C, but all characters made lowercase and spaces substituted with "_" (e.g. "bleeding_edge") %U .. Replace with $(CONFIG_VERSION_REPO), default to "http://downloads.openwrt.org/snapshots/trunk/%T/packages" %R .. Replace with the current build tree revision (e.g. "r31262" or "75488c4a05b8033cf69e91874a61852db7ba9c6c") %T .. Replace with the current target (e.g. "ar71xx") %S .. Replace with the current target/subtarget combo (e.g. "adm5120/router_le") SVN-Revision: 31262	2012-04-12 17:31:16 +00:00
Felix Fietkau	6f46704743	base-files: split service related functions off to /lib/functions/service.sh SVN-Revision: 31042	2012-03-20 14:29:50 +00:00
Jo-Philipp Wich	5fdd1f4bd7	Add munin to /etc/services The muninlite postinst fails to add munin to /etc/services. This patch removes this broken postinst and add an entry for munin in /etc/services. This should have been done when the rest of the /etc/services postinsts were being removed (changesets 26142-26149). Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com> SVN-Revision: 30982	2012-03-18 19:41:57 +00:00
Felix Fietkau	5744d736f2	base-files: remove old coldplugging hacks that are no longer necessary since the new main hotplug2 instance calls udevtrigger as well SVN-Revision: 30916	2012-03-13 09:18:30 +00:00
Jo-Philipp Wich	086cae30ce	base-files: enable conntrack accounting in sysctl. It used to be a compile time option which got deprecated SVN-Revision: 30805	2012-03-04 14:53:17 +00:00
Gabor Juhos	6c61d7cbf1	base-files: remove trailing whitespaces from lib/functions/boot.sh SVN-Revision: 30776	2012-03-02 11:17:30 +00:00
Gabor Juhos	8ae051799a	base-files: remove trailing whitespaces from lib/functions.sh SVN-Revision: 30775	2012-03-02 11:17:29 +00:00
Jo-Philipp Wich	6b9bf71881	base-files: add a uci-defaults script which will migrate the root password to /etc/shadow if needed SVN-Revision: 29865	2012-01-22 22:25:42 +00:00
Felix Fietkau	a963a80a38	base-files: the initial hotplug2 instance sometimes misses a few relevant events, e.g. during module load. rerun udevtrigger for the final hotplug2 instance to fix this SVN-Revision: 29862	2012-01-22 21:14:22 +00:00
Jo-Philipp Wich	9fd3886365	base-files: do not pass --set-worker /lib/hotplug2/worker_fork.so to hotplug2 anymore, its statically linked - patch by Viktar Palstsiuk <viktar.palstsiuk@promwad.com> SVN-Revision: 29806	2012-01-19 15:37:47 +00:00
Jo-Philipp Wich	4e88bcfb00	base-files: implement a --force option for sysupgrade to override image checks, useful to upgrade old ar71xx installations to current trunk ones SVN-Revision: 29688	2012-01-08 15:30:37 +00:00
Gabor Juhos	ff89832fdb	package/base-files: add support for the switch LED trigger SVN-Revision: 29629	2011-12-31 15:02:35 +00:00
Gabor Juhos	3f85c52a3a	package/base-files: use case statement in led init script SVN-Revision: 29628	2011-12-31 15:02:32 +00:00
Jo-Philipp Wich	1c6821b42e	base-files: add -b (--create-backup) option to sysupgrade, which generates a backup .tar.gz according to the user settings. This will also be reused by LuCI. SVN-Revision: 29587	2011-12-20 17:25:15 +00:00
Gabor Juhos	561f4d2840	base-files: add lib/functions/uci-defaults.sh SVN-Revision: 29384	2011-12-01 22:48:46 +00:00
Jo-Philipp Wich	d46e17548b	base-files: kill remaining processes after running user hooks (#10461 ) SVN-Revision: 29256	2011-11-19 16:50:25 +00:00
Jo-Philipp Wich	010e58d209	base-files: another empty password check fix (#10440 ) SVN-Revision: 29208	2011-11-17 09:40:06 +00:00
Jo-Philipp Wich	33443d2a8c	base-files: now that we have date -k, adjust the kernel timezone after setting up TZ and localtime SVN-Revision: 29204	2011-11-17 01:18:22 +00:00
Jo-Philipp Wich	6d80ce78f1	base-files: rewrite killing of nonessential services to not rely on top, use the proc filesystem only SVN-Revision: 29187	2011-11-16 15:01:18 +00:00
Jo-Philipp Wich	8b20bfafdf	base-files: prime root password with "x" to notify programs that there is a shadow record, fix /bin/login.sh password detection accordingly. Solves broken key based dropbear login with empty password after r28935. SVN-Revision: 29130	2011-11-14 19:02:01 +00:00
Nicolas Thill	b49aed1520	package/base-files: enhance service functions * allow matching process by name (useful for processes changing it) * check if first argument is executable * fix function name used in error messages SVN-Revision: 28991	2011-11-12 13:53:15 +00:00
Jo-Philipp Wich	20ff304ed9	base-files: now that the initial password is completely empty (and not primed with "!") adjust login.sh for it to make telnetd available again SVN-Revision: 28943	2011-11-11 13:25:31 +00:00
Imre Kaloz	28039aea90	nuke another 2.4 skeleton SVN-Revision: 28937	2011-11-10 13:39:06 +00:00
Imre Kaloz	55ac529951	the empty root password should be empty ;) SVN-Revision: 28935	2011-11-10 12:47:50 +00:00
Jo-Philipp Wich	be49daffc8	base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli SVN-Revision: 28933	2011-11-10 12:16:41 +00:00
Nicolas Thill	f371d516bf	package/base-files: /lib/functions.sh: add {group,user}_{add,exists} functions SVN-Revision: 28871	2011-11-09 00:23:58 +00:00
Nicolas Thill	62a2827ea7	package/base-files: /lib/functions.sh: let service_stop exit early if no matching process to stop where found SVN-Revision: 28870	2011-11-08 23:35:13 +00:00
Nicolas Thill	b7b56df707	package/base-files: enhance & cleanup service wrappers * add service_check function for checking if a process is alive * add service_signal for sending arbitrary signals to a process * change service_stop to send a TERM signal first, wait for the process to die and send a KILL signal if it doen't * have service_kill print a warning on STDERR stating it has been deprecated SVN-Revision: 28865	2011-11-08 22:47:49 +00:00
Nicolas Thill	d0659ce37e	package/base-files: move service* functions from /etc/rc.common to /lib/functions.sh SVN-Revision: 28864	2011-11-08 22:47:41 +00:00
Jo-Philipp Wich	7e3b6aa1f1	base-files: do not kill udhcpc on sysupgrade, it will tear down the interface if terminated SVN-Revision: 28863	2011-11-08 19:14:55 +00:00
Jo-Philipp Wich	daca6a6a97	base-files: do not assume that "top" is busybox' top, but try to call the applet explicitely SVN-Revision: 28862	2011-11-08 18:48:38 +00:00
Jo-Philipp Wich	a73fffe857	base-files: properly handle wifi ifaces with no network attached, useful for unmanaged interfaces like used for batman or monitoring SVN-Revision: 28860	2011-11-08 14:42:58 +00:00
Nicolas Thill	b6aef59ea8	package/base-files: move /etc/functions.sh to /lib/functions.sh SVN-Revision: 28857	2011-11-08 14:14:29 +00:00
Nicolas Thill	93886bc776	package/base-files: use new service wrapper SVN-Revision: 28835	2011-11-07 22:58:34 +00:00
Nicolas Thill	10a03275bf	package/base-files: /etc/rc.common: add service wrapper around start-stop-daemon SVN-Revision: 28834	2011-11-07 22:58:27 +00:00
Nicolas Thill	8413e90418	package/base-files: /etc/passwd: fix uid number for user 'daemon' (conflicting with user 'nobody') SVN-Revision: 28799	2011-11-07 11:02:55 +00:00
Felix Fietkau	248ab4ac2f	base-files: process platform hotplug calls in the early launch of hotplug2 to avoid having crda calls get stuck at boot time (fixes #10350 , #10354 ) SVN-Revision: 28768	2011-11-05 17:16:01 +00:00
Felix Fietkau	dab5ebaa76	netifd: ensure that a bridge gets created before hostapd needs it, hostapd must not attempt to create the bridge by itself SVN-Revision: 28745	2011-11-04 01:05:12 +00:00
Felix Fietkau	44ba13b578	base-files: load modules early, run wifi detect afterwards and only then process uci defaults this allows uci-defaults scripts to override wifi settings SVN-Revision: 28733	2011-11-03 20:02:25 +00:00
Jo-Philipp Wich	e3daeabda3	base-files: add some more protected services to sysupgrade kill blacklist SVN-Revision: 28732	2011-11-03 19:25:25 +00:00
Jo-Philipp Wich	ef6d7a7e33	base-files: fix typo SVN-Revision: 28681	2011-10-30 15:48:14 +00:00
Jo-Philipp Wich	52e93e54bc	base-files: sysupgrade: kill all but essential processes before starting the update SVN-Revision: 28626	2011-10-27 16:52:31 +00:00
Gabor Juhos	4cc48089c7	base-files/sysupgrade: add more busybox applet symlinks to ramdisk Adds symlinks for printf and wc to make life happier in the sysupgrade ramdisk. Also make code more readable by escaping that overly long line. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28616	2011-10-27 07:54:49 +00:00
Jo-Philipp Wich	272d95f0f1	base-files: remove rdate integration, add busybox ntpd init script and server list in /etc/config/system The rdate applet proved to be too unreliable to obtain the current time on boot: - public time servers are rare and often unreachable or overloaded - rdate does not daemonize, it needs a network connection the moment it is started, leading to race conditions - the /etc/config/timeserver configuration is overly complex and there is no reliable way to disable rdate invocations - the time protocol as specified in RFC 868 is considered obsolete This commit adds an init script /etc/init.d/sysntpd which starts and stops the busybox ntpd accordingly. The builtin ntpd can be disabled by either disabling the init script, removing the symlink to busybox or by clearing the timeserver list in /etc/config/system. SVN-Revision: 28612	2011-10-27 00:21:53 +00:00
Felix Fietkau	c2b5767572	base-files: move network related scripts to a separate package to make the transition to netifd easier SVN-Revision: 28495	2011-10-20 15:01:06 +00:00
Jo-Philipp Wich	59c13202e0	base-files: introduce "igmp_snooping" option to toggle IGMP snooping on bridge interfaces SVN-Revision: 28412	2011-10-11 13:43:08 +00:00
Jo-Philipp Wich	bfbbe5893f	base-files: use "zonename" system option to symlink /etc/localtime via /tmp/localtime to /usr/share/zoneinfo for glibc and eglibc SVN-Revision: 28306	2011-09-26 02:28:04 +00:00
Felix Fietkau	4246c6a6b5	base-files: apply network interface settings such as macaddr, mtu and txqueuelen in prepare_interface instead of setup_interface. setting the mtu after the interface is up is unreliable on some drivers such as gianfar SVN-Revision: 28297	2011-09-24 20:34:17 +00:00
Jo-Philipp Wich	41838f4585	base-files: make ip matching in dns add/remove functions more explicit, avoids overmatching pairs like 1.2.3.35 and 1.2.3.3 SVN-Revision: 28291	2011-09-23 08:35:50 +00:00
Vasilis Tsiligiannis	98372a8eb5	base-files: Fix IPv6 address and route adding on aliases with no IPv4 address configured SVN-Revision: 28241	2011-09-14 13:37:44 +00:00
Vasilis Tsiligiannis	200fd7bce1	Revert "[package] base-files: Add support for assigning multiple IPv6 addresses on an interface" Multiple IPv6 addresses should be handled with alias sections SVN-Revision: 28240	2011-09-14 13:37:40 +00:00
Vasilis Tsiligiannis	718c8ab940	base-files: Add support for assigning multiple IPv6 addresses on an interface SVN-Revision: 28222	2011-09-12 21:07:00 +00:00
Felix Fietkau	dea36724a4	base-files: remove an old network tunable tweak which is messing up network stack performance on modern systems SVN-Revision: 28126	2011-08-29 23:34:11 +00:00
Jo-Philipp Wich	aab33e2e9a	base-files: fix arp() procedure to properly detect /usr/bin/arp SVN-Revision: 27965	2011-08-12 14:34:39 +00:00
Felix Fietkau	8ff7756e82	base-files: warn when calling /etc/init.d/<script> enable and neither START nor STOP is defined SVN-Revision: 27797	2011-07-27 09:02:10 +00:00
Jo-Philipp Wich	94c728dc39	base-files: use "reboot -f" after sysupgrade to prevent executing deleted init scripts SVN-Revision: 27776	2011-07-25 22:19:55 +00:00
Jo-Philipp Wich	365f76551a	base-files: attempt bring up related wifi devices when calling ifup If a user invoked /sbin/ifup to bring up an interface, the setup used to fail in case of wireless networks tied to a non-bridged interface definition. Likewise, the bringup of "lan" in the default configuration will reinitialize the bridge but do not re-join the wireless network to it, requiring an extra call to /sbin/wifi (which might not be possible anymore due to a severed link if connected wirelessly). The changeset modifies the "ifup" command to search for related wireless devices and call "wifi up" on them if applicable. This way the commands for wireless and non-wireless interfaces are unified from a cli point of view. The "ifup -a" case has not been changed to keep the logic of the /etc/init.d/network boot sequence. This might be changed later. Solves #9763. SVN-Revision: 27720	2011-07-22 00:21:20 +00:00
Jo-Philipp Wich	0de28706ca	base-files: implement a generic mechanism to map per-interface sysctls to uci. - option ipv4_xyz is mapped to /proc/sys/net/ipv4/{conf,neigh}/xyz - option ipv6_xyz is mapped to /proc/sys/net/ipv6/{conf,neigh}/xyz This allows e.g. "option ipv6_proxy_ndp 1" to enable NDP proxying on wan. Fixes ticket #8699 . SVN-Revision: 27653	2011-07-17 17:10:30 +00:00
Jo-Philipp Wich	1e34c02e3e	base-files: add -h and --help options to sysupgrade (#9728 ) SVN-Revision: 27630	2011-07-17 09:27:14 +00:00
Jo-Philipp Wich	e0e6d1029e	base-files: use uci_toggle_state() to prevent unwanted aggregation of state vars (#9711 ) SVN-Revision: 27616	2011-07-15 14:57:44 +00:00
Daniel Dickinson	1f69f4cf64	base-files: preinit: Fixed sourcing of diag.sh in /etc/preinit. This caused errors due to frequent use of /proc/cpuinfo to determine board name to pick led layout. Now diag.sh (which only defines set_state and any helper functions) is sourced by a proper preinit function during preinit_main, which is after /proc has been brought up, unlike in /etc/preinit SVN-Revision: 27501	2011-07-07 02:52:02 +00:00
Jo-Philipp Wich	32731a72c2	base-files: pass conloglevel to syslogd (#9463 , #9647 ) SVN-Revision: 27400	2011-07-03 15:11:58 +00:00
Jo-Philipp Wich	344445715a	base-files: assume a default ipv6 prefix size of /64, thats what the majority of users mean when they just specify an ip address SVN-Revision: 27147	2011-06-09 12:36:30 +00:00
Jo-Philipp Wich	fd8ec24187	base-files: if an ip6addr without a prefix is given, assume /128 - otherwise the busybox utilities will interpret it as /0 and create an invalid default route SVN-Revision: 27145	2011-06-09 12:25:48 +00:00
Jo-Philipp Wich	97ee10d691	base-files: fix error reporting for unsupported protocols on virtual interfaces SVN-Revision: 27132	2011-06-07 23:25:43 +00:00
Felix Fietkau	9a227d88dd	base-files: do not write to /etc/config/wireless at boot time unless a new interface was found eliminates unnecessary flash write cycles at every boot patch by Peter Wagner (tripolar) SVN-Revision: 27127	2011-06-07 17:00:43 +00:00
Felix Fietkau	60f66ded72	base-files: make the MAC address of bridge interfaces sticky to avoid ARP issues on wifi re-configuration SVN-Revision: 26990	2011-05-24 09:31:37 +00:00
Jo-Philipp Wich	ed8f726dab	ipcalc.sh CIDR notation Hi, the attached patch makes ipcalc.sh accept IP/Netmask combinations in CIDR notation. Before you could only do: # sh ipcalc.sh 192.168.0.0 255.255.255.0 1 10 IP=192.168.0.0 NETMASK=255.255.255.0 BROADCAST=192.168.0.255 NETWORK=192.168.0.0 PREFIX=24 START=192.168.0.1 END=192.168.0.11 with this patch you can also execute it with: sh ipcalc.sh 192.168.0.0/24 1 10 IP=192.168.0.0 NETMASK=255.255.255.0 BROADCAST=192.168.0.255 NETWORK=192.168.0.0 PREFIX=24 START=192.168.0.1 END=192.168.0.11 The patch is based on #1260 [1], i just changed one line to calculate the START end END ips right. I wonder why that never got included. If there is no reason not to do i would like to ask you to commit that patch, because its a functionality i (and probably others) miss quite often. Btw, i also fixed 4 useless tabs, that might look a bit strange in the patch. Regards, Manuel SVN-Revision: 26930	2011-05-18 09:50:06 +00:00
Jo-Philipp Wich	ba1c1e9016	base-files: retrigger usb coldplug after module loading, solves usb_modeswitch on boot and possibly others (#9352 ) SVN-Revision: 26848	2011-05-08 10:25:58 +00:00
Gabor Juhos	3b1b49a49b	base-files: fix a typo in etc/banner SVN-Revision: 26841	2011-05-07 09:23:33 +00:00
Jo-Philipp Wich	ff4203b9bd	base-files: cleanup permissions of device files in common hotplug rules (#9211 ) SVN-Revision: 26808	2011-05-03 19:37:59 +00:00
Vasilis Tsiligiannis	980190367c	base-files: Use -h instead of deprecated -L for symlink check SVN-Revision: 26485	2011-04-05 15:09:43 +00:00
Vasilis Tsiligiannis	48465d3d63	base-files: fix minor problem in init.d/boot The script tests for the existance of /dev/root with test -e which fails if /dev/root is a dangling symlink making the call to ln fail. Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de> SVN-Revision: 26483	2011-04-05 15:09:32 +00:00
Daniel Dickinson	d5542b4f59	block-mount base-files: Added additional check to pi_include to ensure that a directory used with pi_include actually contains files matching the souring pattern because if not the shell dies due to an empty string in for statement. Added /lib/functions/fsck as an empty dir to block-mount. This combination fixes a warning which generates a lot of bug reports, without panicking the kernel like the last attempt. SVN-Revision: 26479	2011-04-05 12:12:57 +00:00
Felix Fietkau	e4e63b9c1b	base-files: bridge config, avoid having a random ipv6 ll address So far, we are setting the bridge interface up before having added any bridge interface ports. This results in the bridge assigning a random mac address to its bridge interface and therefore IPv6 assigning a matching link local address to the bridge interface as soon as the bridge interface is up. After adding the first bridge port interface, the bridge's mac address is reset correctly, however the IPv6 link local address stays the same. This commit ensures that we are at least having the IPv6 link local address of the first interface added to the bridge instead of a random one. Signed-off-by: Linus Lüssing <linus.luessing@web.de> SVN-Revision: 26426	2011-04-03 01:23:45 +00:00
Jo-Philipp Wich	fe8b9d5232	base-files: properly handle vlans on top of wireless interfaces SVN-Revision: 26230	2011-03-18 18:24:51 +00:00
Felix Fietkau	a3b9971d84	base-files: overlayfs whiteouts depend on a specific xattr entry, which does not get preserved by the tmpfs->overlay copy. work around this by cleaning all copied "(overlay-whiteout)" symlinks after the switch to jffs2 SVN-Revision: 26208	2011-03-17 19:09:43 +00:00
Felix Fietkau	66bcd1d049	base-files: add initial support for mounting overlayfs SVN-Revision: 26207	2011-03-17 19:09:39 +00:00
Jo-Philipp Wich	629e73938e	base-files: update sysctl.conf for modern kernels SVN-Revision: 26204	2011-03-17 15:35:41 +00:00
Vasilis Tsiligiannis	1b66204ccd	base-files: Autodetect newly added wireless hardware SVN-Revision: 26166	2011-03-15 00:44:15 +00:00
Felix Fietkau	71e83bd2e1	base-files: add a default /etc/services files SVN-Revision: 26142	2011-03-13 19:47:42 +00:00
Felix Fietkau	c33f2efbb2	base-files: add users ftp (for ftp servers), network (network related daemons such as tor, quagga, ...) SVN-Revision: 26138	2011-03-13 19:10:28 +00:00
Felix Fietkau	f5c130cfda	base-files: add an ftp group as well SVN-Revision: 26136	2011-03-13 19:04:32 +00:00
Felix Fietkau	554cbe7f18	base-files: add a few default groups to /etc/group so that we can get rid of a few postinst scripts SVN-Revision: 26133	2011-03-13 18:56:34 +00:00
Jo-Philipp Wich	73468de8d1	base-files: fix sysctl handling, do not react on fake ifaces in route hotplug handler SVN-Revision: 25713	2011-02-25 22:44:37 +00:00
Michael Büsch	e6100a161b	boot.sh: Tabs are used for indent. Also use tabs in jffs2_ready() SVN-Revision: 25635	2011-02-20 22:40:47 +00:00
Michael Büsch	16a300ea66	base-files: Add "-o noatime" to mount wrapper noatime is cheaper than default relatime. SVN-Revision: 25634	2011-02-20 22:39:08 +00:00
Michael Büsch	3a12229c1d	Fix whitespace SVN-Revision: 25632	2011-02-20 21:25:45 +00:00
Felix Fietkau	9f7f8110e7	base-files: remove a stale reference to /usr/lib/common.awk (thx, swalker) SVN-Revision: 25528	2011-02-13 19:06:20 +00:00
Imre Kaloz	e4589a2e5f	it's time for some attitude adjustment ;) SVN-Revision: 25514	2011-02-13 11:20:09 +00:00
Felix Fietkau	803e9ceb90	base-files: /usr/lib/common.awk is only used by /bin/ipcalc.sh, move the code there SVN-Revision: 25495	2011-02-13 01:44:57 +00:00
Jo-Philipp Wich	74ab5be3d7	base-files: remove ptbtime3 rdate server, its dead SVN-Revision: 25479	2011-02-12 17:54:01 +00:00
Jo-Philipp Wich	8b1b99ba73	base-files: update rdate server list SVN-Revision: 25478	2011-02-12 17:46:36 +00:00
Jo-Philipp Wich	ee3a4c2ee9	base-file: cleanup ipv6 enabling in unbridge SVN-Revision: 25473	2011-02-12 16:14:15 +00:00
Jo-Philipp Wich	875ff44592	base-files: - properly disable IPv6 on bridge ports - introduce accept_ra option, defaults to true for dhcp interfaces, false for others - introduce send_rs option, defaults to true for static interfaces, false for others SVN-Revision: 25454	2011-02-11 00:39:11 +00:00
Jo-Philipp Wich	4e34fc521c	base-files: derive lease_acquired dhcp state var from /proc/uptime SVN-Revision: 25452	2011-02-10 20:05:05 +00:00
Vasilis Tsiligiannis	d063af3fcf	base-files: Add include for target specific hotplug rules SVN-Revision: 25415	2011-02-07 22:28:09 +00:00
Michael Büsch	99c66237f0	hotplug2 rules: Run /etc/hotplug.d/firmware/ scripts (if any) on firmware load events SVN-Revision: 25383	2011-02-06 14:35:07 +00:00
Jo-Philipp Wich	3d82109add	base-files: don't stop hotplug events for ppp interfaces, similar fix like the earlier one for tun/tap interfaces SVN-Revision: 25355	2011-02-03 22:43:11 +00:00
Jo-Philipp Wich	79b22b246b	base-files: make the skipping of ppp interfaces in 10-net hotplug more explicit, this allows users to rely on hotplug events for ppp0 .. ppp9 interfaces spawned by other programs SVN-Revision: 25354	2011-02-03 22:34:30 +00:00
Vasilis Tsiligiannis	bd8a1549eb	base-files: Fix alsa raw audio device hotplug rule SVN-Revision: 25301	2011-02-02 01:23:34 +00:00
Vasilis Tsiligiannis	824331a594	hotplug2: Use stricter matching for rule regular expressions SVN-Revision: 25282	2011-02-01 16:37:53 +00:00
Vasilis Tsiligiannis	3a3d95b191	base-files: Remove deprecated hotplug2 commands, update old commands to new SVN-Revision: 25268	2011-01-31 22:29:31 +00:00
Jo-Philipp Wich	a0b2eba08c	base-files: fix a typo in processing of additional dhcp request opts SVN-Revision: 25239	2011-01-29 17:06:07 +00:00
Jo-Philipp Wich	a8edd9d50e	base-files: fix handling of dhcp "reqopts" option SVN-Revision: 25237	2011-01-29 13:45:16 +00:00
Florian Fainelli	d7fe921089	base-files: support port_state in led config (#6763 ) Signed-off-by: Alexey Torkhov <atorkhov@gmail.com> SVN-Revision: 25172	2011-01-27 21:49:46 +00:00
Gabor Juhos	25feec0c9c	package/base-files: add get_magic_long() to common upgrade script Patch-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 25117	2011-01-26 20:35:37 +00:00
Jo-Philipp Wich	3b6851aa82	base-files: implement "reqopts" parameter for dhcp interfaces to specify additional dhcp options to request SVN-Revision: 24780	2010-12-22 07:20:24 +00:00
Jo-Philipp Wich	3bd7985a0b	base-files: the busybox update to v1.15.3 completely broke udhcpc route option handling, repair default.script to work with the new format (#6435 ) SVN-Revision: 24778	2010-12-22 07:07:15 +00:00
Jo-Philipp Wich	deb9661785	Âbase-files: don't mark /etc/banner as conffile SVN-Revision: 24742	2010-12-20 19:51:05 +00:00
Gabor Juhos	63c786dde7	base-files: add support for the usbdev LED trigger SVN-Revision: 24647	2010-12-17 17:10:14 +00:00
Felix Fietkau	5a351509aa	base-files: use shutdown instead of stop when the system goes down (patch by tripolar) SVN-Revision: 24540	2010-12-13 08:01:21 +00:00
Florian Fainelli	ebe7bdba88	adds a --help option to /sbin/wifi Signed-off-by: Sebastian Philipp <sebastian@spawnhost.de> SVN-Revision: 24258	2010-12-05 11:22:56 +00:00
Jo-Philipp Wich	9a996248d4	base-files: derive connect_time from uptime as local system time may warp due to rdate, ntp and other means SVN-Revision: 24212	2010-12-01 19:55:24 +00:00
Jo-Philipp Wich	a8c3d1ab6d	base-files: save the connect time of interfaces in uci state SVN-Revision: 24206	2010-12-01 17:37:32 +00:00
Jo-Philipp Wich	ca829e805b	base-files: disable ipv6 on bridge ports, this prevents stray RA assigned and link local addresses on bridge member devices SVN-Revision: 24194	2010-11-30 00:46:21 +00:00
Jo-Philipp Wich	d0ab35c115	base-file: add metric option for static and dhcp protos, this simplifies the management of multiple default routes SVN-Revision: 24020	2010-11-17 19:11:50 +00:00
Jo-Philipp Wich	c5711cadd3	base-files: change /dev permissions to 0755 when hotplug2 is used (#6039 ) SVN-Revision: 23908	2010-11-07 00:28:15 +00:00
Jo-Philipp Wich	a8efa34da3	Fix permissions for /etc and other dirs after clean flash (#6039 ) During the first OpenWrt boot after a clean flash (when the jffs2 partition is not yet initialized) tmpfs is used instead of the usual jffs2 overlay filesystem. If this tmpfs is mounted with default options, all directories created there (/etc, /etc/config, other subdirectories in /etc) get permissions 1777 by default, and these permissions then persist in the created jffs2 at least until subsequent sysupgrade. Mounting tmpfs with mode=0755 fixes the permission problem. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> SVN-Revision: 23906	2010-11-07 00:26:00 +00:00
Jo-Philipp Wich	d856ed78ad	base-files: add udhcpc vendorid option (#7744 ) SVN-Revision: 23279	2010-10-06 21:21:28 +00:00
Jo-Philipp Wich	d80f82d7a4	base-files: - add sysupgrade support for keepfile hints * introduces /lib/upgrade/keep.d/ for per-package keepfile lists * introduces /etc/sysupgrade.conf for user defined keepfile hints - prime /lib/upgrade/keep.d/base-files-essential to keep sysupgrade usable for images without opkg - change sysupgrade to build the keepfile list from /lib/upgrade/keep.d/, /etc/sysupgrade.conf and opkg list-changed-conffiles SVN-Revision: 23258	2010-10-05 19:24:12 +00:00
Jo-Philipp Wich	978ecae685	base-files: sysupgrade: merge info from "opkg list-changed-conffiles" to backup file list SVN-Revision: 23233	2010-10-05 07:40:25 +00:00
Jo-Philipp Wich	0fda5f7507	base-files: utilize uci_get_state to read the previous dhcp router address in udhcpc default script. The setup_switch() procedure provided by swconfig calls config_load() during network restart and thus confuses udhcpc's uci state keeping resulting in a missing default route on each second network restart. Bypass the cached state vars and query uci directly to make the script immune against unwanted runtime changes. SVN-Revision: 23211	2010-10-04 00:07:07 +00:00
Jo-Philipp Wich	6bcdab79b6	base-files: prevent possible sourcing of JFFS2 meta files when merging overlay hooks SVN-Revision: 23114	2010-09-23 17:32:58 +00:00
Daniel Dickinson	b125e3f68e	Fixed duplicated content in file in commit 23111 SVN-Revision: 23112	2010-09-23 14:06:47 +00:00
Daniel Dickinson	7fe34123d6	Missed file committing previous change 23110 SVN-Revision: 23111	2010-09-23 14:03:22 +00:00
Daniel Dickinson	18b473ca9b	base/block-extroot, base/block-mount: Modified preinit and block-extroot and block-mount so that use of block-mount and block-extroot do not require that block-extroot, block-mount, nor the kernel modules they depend, on are required to included in the image. That is block-extroot and dependencies may now be installed as modules onto the jffs2 part of a squashfs system and it will work. In addition packages which are installed into the jffs2 of a squashfs system may now affect preinit, so long as they do not require execution of commands that occur before the merging of the jffs2 and built-in (squashfs) preinit scripts is done. Thanks jow for the preinit merge stuff! SVN-Revision: 23110	2010-09-23 13:58:05 +00:00
Daniel Dickinson	1385904dfa	base-files: Add function pi_include the /lib/functions/boot.sh used by preinit, which safely sources files as well as working correctly whether the script using it is a package added to the jffs2 part of a squashfs or built into an image or on some other root filesystem. SVN-Revision: 23099	2010-09-19 23:29:40 +00:00
Jo-Philipp Wich	52531f4eb6	base-files: kill possibly existing udhcpc instance when bringing up a dhcp iface, utilize service_kill() in dhcp shutdown. Based on patch by Stijn Tintel. Possibly related to #7314 SVN-Revision: 23092	2010-09-19 15:13:06 +00:00
Jo-Philipp Wich	84b7b812f3	base-files: cached state vars after scan_interfaces might be out of sync when binding dhcp leases, this could lead to an unconfigured wan interface in certain circumstances. Replace config_get calls with uci_get_state SVN-Revision: 23091	2010-09-19 15:04:08 +00:00
Jo-Philipp Wich	4815de3f26	base-files: introduce service_kill() into functions.sh - a convenience wrapper for killing services by pid or pidfile with a grace period for termination before kill SVN-Revision: 23087	2010-09-19 14:03:32 +00:00
Jo-Philipp Wich	91118a9500	base-files: add an experimental "-c" flag which tries to preserve all changed files in /overlay/etc minus some system files SVN-Revision: 22977	2010-09-07 22:20:26 +00:00
Jo-Philipp Wich	63991ba875	base-files, uci: properly revert list state on config_load This fixes a bug where lists end up with duplicate values if config_load was invoked multiple times. SVN-Revision: 22629	2010-08-14 00:45:15 +00:00
Hamish Guthrie	cbc8b3968c	base_files: Remove . from end of localhost entry SVN-Revision: 22508	2010-08-06 08:00:40 +00:00
Jo-Philipp Wich	8c4ac87e8f	base-files: r22444 caused interfaces to remain down if the macaddr option is used, fix it. Also localize the txqueuelen option variable SVN-Revision: 22467	2010-08-02 20:45:52 +00:00
Florian Fainelli	56aa129fed	add txqueuelen option, patch from Roberto Riggio SVN-Revision: 22444	2010-07-31 22:32:28 +00:00
Jo-Philipp Wich	9bf9ea9802	base-files: localize variable in do_move_devtmpfs(), remove extra temporary variable and shorten conditional SVN-Revision: 22380	2010-07-24 19:33:11 +00:00
Alexandros C. Couloumbis	6a85a3b53b	package/base-files: add support for devtmpfs (thank you rauchwolke at gmx.net) SVN-Revision: 22379	2010-07-24 19:21:27 +00:00
Jo-Philipp Wich	e1a654dd9f	base-files: unconditionally unlock the rootfs_data partition (#7437 ) SVN-Revision: 22377	2010-07-24 15:47:15 +00:00
Jo-Philipp Wich	1dd824a358	base-files, busybox: fix 22279, simplify code and get rid of awk SVN-Revision: 22282	2010-07-18 18:36:12 +00:00
Daniel Dickinson	8974bc6ae2	base-files & telnet: Fixed telnet starting even with root password when shadow passwords in use. SVN-Revision: 22279	2010-07-18 15:18:38 +00:00
Felix Fietkau	3e75044a95	wifi: fix duplicate ht capabilities in the hostapd config file by clearing the list at config load time SVN-Revision: 22099	2010-07-08 18:36:12 +00:00
Jo-Philipp Wich	506db2a57e	base-files: add "mtu" option for route sections, allows setting per-route mtu values SVN-Revision: 22003	2010-06-30 23:46:34 +00:00
Jo-Philipp Wich	ce5d644ac1	base-files: enable IPv6 forwarding by default since the default firewall supports ip6tables now SVN-Revision: 21766	2010-06-12 16:59:12 +00:00
Jo-Philipp Wich	93c2c81bcf	base-files: introduce option "broadcast" for proto=dhcp interface to enable the broadcast flag in DHCP requests, required by certain providers SVN-Revision: 21661	2010-06-02 20:21:41 +00:00
Jo-Philipp Wich	fa244a1265	base-files: remove IPv6 LL addr from interfaces before adding them to a bridge SVN-Revision: 21659	2010-06-02 17:18:38 +00:00
Jo-Philipp Wich	94db915196	base-files: - add aliases to device by default (not ifname) - introduce option "layer" to select the target ifname to attach the alias to: - 3 use tun device (tun over bridge over device) fallback to bridge or device - 2 use bridge (bridge over device) fallback to device - 1 use device SVN-Revision: 21655	2010-06-02 00:22:13 +00:00
Jo-Philipp Wich	75941a19ac	base-file: move alias setup to route hotplug, this fixes alias sections for non-static interfaces like ppp, dhcp, 6in4 etc. SVN-Revision: 21652	2010-06-01 21:43:52 +00:00
Jo-Philipp Wich	c14e8be337	base-files: don't skip subsequent hotplug rules when doing makedev for tun or tap interfaces - this fixes support for uci managed OpenVPN interfaces and other externally created tuntap devices SVN-Revision: 21641	2010-05-31 01:22:36 +00:00
Jo-Philipp Wich	261d41a906	base-files: - use add_dns() and remove_dns() for when changing resolv.conf.auto for static or dhcp interfaces - force 0644 permissions when creating resolv.conf.auto, fixes dnsmasq permissions denied problem with pppd interfaces - revert dns servers in /sbin/ifdown - bump package revision SVN-Revision: 21638	2010-05-30 18:23:43 +00:00
Jo-Philipp Wich	09df0523fd	base-files: revert r21595 SVN-Revision: 21597	2010-05-28 10:52:02 +00:00
Jo-Philipp Wich	482b8385d2	base-files: bring bridge port iface down before changing the mac (#7111 ) SVN-Revision: 21595	2010-05-28 00:59:19 +00:00
Jo-Philipp Wich	8bc961239b	base-files: 3g connection interfaces are now called "3g-*" - adjust 10-net hotplug handler to match them SVN-Revision: 21591	2010-05-28 00:35:54 +00:00
Jo-Philipp Wich	c0820d3261	base-files: respect .auto option when running coldplug_interface_*() hooks on boot SVN-Revision: 21588	2010-05-27 23:04:56 +00:00
Felix Fietkau	6df2ad3e70	when changing the mac address of a bridge interface, keep member interface addresses in sync (patch from #7111 ) SVN-Revision: 21577	2010-05-27 14:04:28 +00:00
Jo-Philipp Wich	d6a142375b	base-files: fix a preinit hang in jffs2_ready() when no rootfs_data partition is found (#7362 ) SVN-Revision: 21511	2010-05-20 05:57:54 +00:00
Jo-Philipp Wich	da55c9639a	base-files (#7316 ) - improve rdate reliability - make rdate config more ntp like - move time server list to /etc/config/timeserver - bump package revision SVN-Revision: 21495	2010-05-17 19:54:35 +00:00
Jo-Philipp Wich	ea06a67eac	base-files: use uci_get() wrapper (#7312 ) SVN-Revision: 21490	2010-05-17 19:34:08 +00:00
Jo-Philipp Wich	be41fdd01a	base-files: add add_dns() and remove_dns() helpers to network config, useful to merge dns entries from multiple interfaces SVN-Revision: 21391	2010-05-07 01:17:47 +00:00
Jo-Philipp Wich	6a3cbba92e	base-files: add a coldplug_interface_* hook to bring up non-hotpluggable interfaces on boot SVN-Revision: 21389	2010-05-06 19:50:22 +00:00
Jo-Philipp Wich	dd38b15b75	base-files, ppp: fix interface shutdown SVN-Revision: 21386	2010-05-06 01:14:24 +00:00
Jo-Philipp Wich	66ab73d01f	base-files, ppp: remove protocol specific cleanup code from /sbin/ifdown and move it to protocol stop callbacks SVN-Revision: 21383	2010-05-05 23:24:11 +00:00
Felix Fietkau	f9591d229a	base-files: do not bring up wlan interfaces from hotplug events, so that wrong network/wireless configs are more noticeable SVN-Revision: 21379	2010-05-05 15:56:58 +00:00
Vasilis Tsiligiannis	a481cafb55	base-files: Remove redundant stopping of watchdog busybox watchdog applet should stop the watchdog before shutting down SVN-Revision: 21341	2010-05-03 10:56:58 +00:00
Florian Fainelli	20da5f495f	add stop() to watchdog init script, patch from Yury Polyanskiy SVN-Revision: 21334	2010-05-03 09:05:35 +00:00
Florian Fainelli	1847940688	Fix bug in foregrounding in /etc/init.d/rcS Not using the config_xxx functions correctly. Amended. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 20928	2010-04-16 18:14:08 +00:00
Florian Fainelli	eafa2ec962	option to allow boot to run to completion before starting shell Setting the system variable "foreground" to yes causes the system to run the init scripts in series and wait for completion. This is useful if (a) you don't want the user getting into the console until the system is initialized, or (b) you have things going on in your scripts that require strict ordering (and no possible race conditions). Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 20841	2010-04-13 19:57:25 +00:00
Felix Fietkau	c82bcb2a29	fix jffs2 and mini_fo mount in failsafe (patch from #7134 ) SVN-Revision: 20838	2010-04-13 14:24:58 +00:00
Florian Fainelli	135c4b8d05	add debugging entry to hotplug config This is useful for seeing what devices are detected by the system. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 20785	2010-04-10 18:35:14 +00:00
Vasilis Tsiligiannis	a1e4c66c16	base-files: Use hotplug2 to download firmware SVN-Revision: 20683	2010-04-03 18:21:02 +00:00
Jo-Philipp Wich	10c00a6368	base-files: also regenerate wifi config if existing config contains only whitespace SVN-Revision: 20669	2010-04-03 13:31:59 +00:00
Vasilis Tsiligiannis	043b77a460	base-files: Cancel firmware loading if file doesn't exist SVN-Revision: 20649	2010-04-01 15:22:13 +00:00
Nicolas Thill	b34bba25d2	base-files: fix shell syntax (prevent error messages when activating initscripts in IB) SVN-Revision: 20571	2010-03-29 03:58:17 +00:00
Jo-Philipp Wich	63f49e43e6	base-files: add a hotplug handler for rdate SVN-Revision: 20518	2010-03-27 17:13:33 +00:00
Jo-Philipp Wich	163b15f5bb	base-files: make press key message more explicit in preinit SVN-Revision: 20392	2010-03-23 22:56:12 +00:00
Florian Fainelli	7af8ee0481	change from /jffs to /overlay, patch from Daniel Dickinson SVN-Revision: 20356	2010-03-21 17:16:50 +00:00
Felix Fietkau	3ab30b486f	base-files: reload switch settings on /etc/init.d/network start as well SVN-Revision: 20232	2010-03-15 14:02:49 +00:00
Felix Fietkau	73f61a64eb	fix error output of brctl if bridging is not supported. The following error is displayed during network configuration on any device that has DEVICE_TYPE set to something else then router, or has brctl functionality disabled through some other method: "brctl: SIOCGIFBR: Package not installed" This is due to the unbridge function being called, which uses "brctl show" to determine if the interface is bridged. Signed-off-by: Ithamar R. Adema <ithamar.adema@team-embedded.nl> SVN-Revision: 20218	2010-03-14 21:10:07 +00:00
Jo-Philipp Wich	1968fb8da3	base-files: force preinit to use busybox mount (#6797 ) SVN-Revision: 20176	2010-03-13 02:59:05 +00:00
Gabor Juhos	32be7f7605	package/base-files: call preinit_ip_deconfig before processing init on initramfs images SVN-Revision: 20159	2010-03-12 14:37:19 +00:00
Nicolas Thill	d08b2b02cf	base-files: fix preinit code typos Signed-off-by: Ithamar R. Adema <ithamar.adema@team-embedded.nl> Acked-by: Daniel Dickinson <cshore@csolve.net> SVN-Revision: 20124	2010-03-10 18:09:53 +00:00
Nicolas Thill	71886caf3f	firstboot: detect mtd, rom & jffs parts first, fix jffs mounted test SVN-Revision: 19980	2010-03-05 00:53:51 +00:00
Travis Kemen	32f6e6c44d	revert r19964 for now, there are issues with opkg/ipkg.py generating the status db SVN-Revision: 19970	2010-03-04 02:42:23 +00:00
Travis Kemen	249d48a68e	grab all config files for installed packages, closes #3718 SVN-Revision: 19964	2010-03-03 18:19:19 +00:00
Nicolas Thill	45f7dc9459	firstboot: fix typo (closes: #6738 ) SVN-Revision: 19944	2010-03-01 23:54:45 +00:00
Felix Fietkau	524303b849	base-files: fix enter failsafe message SVN-Revision: 19937	2010-03-01 18:20:39 +00:00
Felix Fietkau	9be4598569	add block-extroot, a package for using an external filesystem as rootfs (patch by cshore) SVN-Revision: 19880	2010-02-26 22:46:10 +00:00
Felix Fietkau	bfeb96126d	add the block-mount package by Daniel Dickinson (cshore), replacing existing automount functionality SVN-Revision: 19877	2010-02-26 22:45:39 +00:00
Jo-Philipp Wich	2e0d14f9c2	base-files: add /dev/hvcX to hotplug common rules SVN-Revision: 19608	2010-02-12 18:57:01 +00:00
Jo-Philipp Wich	250b52f673	base-files: revert dhcp state information on ifdown and restore pre-r19530 behaviour in udhcp default.script SVN-Revision: 19597	2010-02-12 02:06:57 +00:00
Travis Kemen	9e5844fda2	Here is LVM support for OpenWRT. It introduces 3 new packages: - kmod-dm for the device mapper kernel module. - kmod-libdevmapper for the device-mapper library. - kmod-lvm2 for the lvm tool. Note that it currently does not create the symlinks for all the lvm tools, so you have to use lvm pvs rather than just pvs. Thanks Stefan Monnier SVN-Revision: 19595	2010-02-12 01:37:02 +00:00
Lars-Peter Clausen	275b0d8cd4	Don't do lazy unmounting of filessystems at reboot/poweroff. It is unneeded and could couse a broken filesystem if unmounting takes to long. Thanks to Peter Wagner SVN-Revision: 19568	2010-02-09 18:07:36 +00:00
Jo-Philipp Wich	520ea8e5f9	base-files: fix udhcpc address acquisition on network restart (patch by Scott Dudley) SVN-Revision: 19530	2010-02-05 07:57:07 +00:00
Felix Fietkau	19555b702e	/sbin/wifi: improve reliability of restarts by resetting the state properly SVN-Revision: 19495	2010-02-02 02:19:10 +00:00
Jo-Philipp Wich	7ad9c8615f	base-file: revert unrelated change accidentally committed in r19478 SVN-Revision: 19488	2010-02-01 02:00:57 +00:00
Jo-Philipp Wich	e367f5434a	base-files: preinit: get rid of /dev/null redirections and use grep -q where applicable SVN-Revision: 19478	2010-02-01 00:32:46 +00:00
Florian Fainelli	b93682af14	quieten the check for devs, thanks nbd SVN-Revision: 19473	2010-01-31 21:09:53 +00:00
Florian Fainelli	7480065917	/dev/null was used before it was created, so an empty file was created. This prevented the actual device node from being created. The attached patch fixes that, patch from cshore SVN-Revision: 19472	2010-01-31 21:01:21 +00:00
Felix Fietkau	10ec4fa292	when rebooting, use lazy umounts as fallback (patch by puchu) SVN-Revision: 19429	2010-01-30 18:17:57 +00:00
Felix Fietkau	541725ce18	stop syslogd before rebooting, otherwise umount might not work properly when logging to a file (thx, puchu) SVN-Revision: 19428	2010-01-30 18:17:52 +00:00
Felix Fietkau	d46a32fa60	when rebooting, stop the network interfaces last (just before umount) to allow services to shut down properly (thx, puchu) SVN-Revision: 19427	2010-01-30 18:17:48 +00:00
Felix Fietkau	a254a9ff08	base-files: do not warn about nonexistant sysctl overrides (some of them are config dependent) SVN-Revision: 19375	2010-01-29 02:17:11 +00:00
Felix Fietkau	b88fc11e2a	preinit: Remove Ctrl-C prompt...impossible on /dev/console (patch by cshore) SVN-Revision: 19367	2010-01-28 19:27:49 +00:00
Felix Fietkau	56bc02a305	add preinit modularization work by Daniel Dickinson (cshore) SVN-Revision: 19331	2010-01-25 17:11:17 +00:00
Felix Fietkau	62d7bb6ecd	fix a typo in the hwmode handling in /sbin/wifi (thx, maddes) SVN-Revision: 19313	2010-01-24 14:27:27 +00:00
Jo-Philipp Wich	8d0bb8f5dd	base-files: ensure that the ip6addr of the main interface stays the primary ip by re-adding it after alias setup is completed - patch by Alina Friedrichsen SVN-Revision: 19303	2010-01-23 22:56:07 +00:00
Jo-Philipp Wich	3634de3b80	base-files: try to activate hotplugged partitions as swap and fall back to lazy mount (#6517 ) SVN-Revision: 19300	2010-01-23 21:58:01 +00:00
Jo-Philipp Wich	bf9917d651	base-files: disable bridge firewalling by default SVN-Revision: 19214	2010-01-18 05:38:44 +00:00
Jo-Philipp Wich	39f2b6d957	base-files: sysupgade library coomon.sh has "bug" in glibc enviorement. For some reason ld-linux.so.3 is not installed at ramfs and sysupgrade always fails. Signed-off-by: Zintis Petersons <zintis.petersons@e-mail.lv> SVN-Revision: 19167	2010-01-16 13:39:13 +00:00
Jo-Philipp Wich	cb30b52ec1	base-files, mac80211 (#6491 ) - fix wep key handling in iw with mac80211 based drivers - sanitize keys where necessary - put a procedure prepare_key_wep() into /sbin/wifi for use by other driver backends SVN-Revision: 19118	2010-01-13 18:39:44 +00:00
Felix Fietkau	8ec79b460c	run led init after /etc/init.d/done to keep the configured led settings active after the system has finished booting Signed-off-by: Nuno Goncalves <nunojpg@gmail.com> SVN-Revision: 19050	2010-01-06 02:34:20 +00:00
Hamish Guthrie	406a4a885d	Add udhcpc command-line argument to request rootpath SVN-Revision: 18876	2009-12-21 10:25:15 +00:00
Felix Fietkau	91a8f2334a	add missing argument to debug/mount wrappers (thx, matteo) SVN-Revision: 18718	2009-12-09 17:13:16 +00:00
Felix Fietkau	889532d1fd	do not start multiple subshells for applying /etc/uci-defaults. use sh -x for hush compatibility SVN-Revision: 18717	2009-12-09 15:15:25 +00:00
Felix Fietkau	f1649982e2	functions.sh: use functions instead of aliases for the debug, mount wrappers - hush does not have aliases SVN-Revision: 18715	2009-12-09 13:36:43 +00:00
Felix Fietkau	4ab57b9e0f	fix firmware loading broken by the busybox upgrade SVN-Revision: 18705	2009-12-08 20:04:38 +00:00
Felix Fietkau	e39038f688	mount debugfs by default SVN-Revision: 18502	2009-11-23 20:35:05 +00:00
Jo-Philipp Wich	4d9b1d6c75	base-files: sysupgrade: restrict find command to plain files to avoid duplicates when generating the conffiles tgz archive SVN-Revision: 18455	2009-11-20 23:02:35 +00:00
Felix Fietkau	e9aa394113	remove obsolete uci validation awk code SVN-Revision: 18110	2009-10-20 21:48:40 +00:00
Felix Fietkau	e69a6f1b82	base-files: remove obsolete stuff from common.awk SVN-Revision: 18109	2009-10-20 21:45:57 +00:00
Jo-Philipp Wich	cfe1bc11ad	base-files: only try to execute watchdog if binary is present SVN-Revision: 18102	2009-10-20 17:07:08 +00:00
Felix Fietkau	8183d10d17	check for sysfs before bypassing normal hotplug calls for firmware events (fixes #5200 ) SVN-Revision: 17839	2009-10-03 11:28:02 +00:00
Jo-Philipp Wich	f44e4dcb4b	base-files: add hotplug rules for /dev/lpX (#863 ) SVN-Revision: 17792	2009-09-28 20:05:50 +00:00
Felix Fietkau	2da13936e9	firstboot: add support for union mounts SVN-Revision: 17778	2009-09-27 22:56:21 +00:00
Felix Fietkau	0f9f23aebe	base-files: move firstboot to /sbin SVN-Revision: 17775	2009-09-27 22:56:11 +00:00
Nicolas Thill	6478e24f7d	accommodate for 5 digits svn revisions :) SVN-Revision: 17670	2009-09-22 03:05:45 +00:00
Jo-Philipp Wich	2f921cb48d	base-files: clear ip addresses on interfaces that are about to be added to a bridge SVN-Revision: 17596	2009-09-16 14:21:19 +00:00
Jo-Philipp Wich	bc37b2e831	base-files: dispatch ifdown events for proto=none interfaces and fix a race condition between revert state and hotplug handlers SVN-Revision: 17582	2009-09-14 16:14:27 +00:00
Jo-Philipp Wich	8962270fec	base-files: add /etc/rc.local to the default save file list SVN-Revision: 17572	2009-09-12 15:57:31 +00:00
Jo-Philipp Wich	bdaeaafbef	base-files: introduce a ready-to-use /etc/rc.local to let users run custom commands on init without creating custom init scripts SVN-Revision: 17571	2009-09-11 21:35:03 +00:00
Felix Fietkau	91d40a14af	Revert "fix nonhotpluggable networks not being brought up. Closes #2781 " (r17527) until we've solved the race conditions it creates SVN-Revision: 17544	2009-09-09 00:16:55 +00:00
Travis Kemen	27915ac778	fix nonhotpluggable networks not being brought up. Closes #2781 SVN-Revision: 17527	2009-09-06 17:02:14 +00:00
Gabor Juhos	f494bcc222	package/base-files: set state to 'preinit' before preinit.arch is used, and set state to 'failsafe' when entering failsafe mode SVN-Revision: 17517	2009-09-05 18:44:48 +00:00
Felix Fietkau	7d67818ab1	Revert "add ifup -a to boot(), closes #4543 #2781 " (r17515) Hotpluggable interfaces are already brought up before /etc/init.d/network boot and this change can break them, if the ifup -a command runs at the wrong time, also starts many interfaces twice, which can lead to issues with PPPoE. SVN-Revision: 17516	2009-09-05 13:05:59 +00:00
Travis Kemen	1776830e64	add ifup -a to boot(), closes #4543 #2781 SVN-Revision: 17515	2009-09-05 05:33:23 +00:00
Travis Kemen	4c47562a37	extend logging functions SVN-Revision: 17514	2009-09-04 21:09:13 +00:00
Felix Fietkau	6155fdf5d3	preinit: fix failsafe mode through ctrl+c on devices that do not provide a preinit.arch file SVN-Revision: 17470	2009-09-02 15:14:53 +00:00
Geoff Levand	525d86686e	udev: Update udev package from udev-106 to udev-142 Update the init scripts have to use udevadm where appropriate. The udev package no longer provides separate udev utilities like udevtrigger and udevsettle. These have been incorporated into the udev admin program udevadm. Replace the udevextras sub package with config options to the udev package. Update the preinit script to check for '/lib/udev/devices', and copy it to '/dev/ if it is found, then to conditionaly setup /dev the old way with mknod etc. Udev now recommends using the directory '/lib/udev/devices' to initialize the '/dev' directory at startup. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> SVN-Revision: 17378	2009-08-24 20:19:26 +00:00
Jo-Philipp Wich	7d1c2a0612	base-files: fix sysupgrade get_magic_word() function to return proper values if the first two bytes are identical SVN-Revision: 17319	2009-08-19 19:12:34 +00:00
Jo-Philipp Wich	27da9d1984	base-files: move ipv6 module loading from setup_interface() to addif() in the hotplug call, this ensures that ipv6 is loaded before any interfaces or aliases with ip6addr option are configured (#5356 ) SVN-Revision: 17217	2009-08-10 23:48:10 +00:00
Felix Fietkau	91f98f1756	base-files: some /lib/network/config.sh refactoring * Localize a lot more variables than before. * Do stuff or localize variables at later points or inner blocks so less commands are executed in some cases. * Use the default option of config_get where it makes sense. Signed-off-by: Malte S. Stretz <mss@apache.org> SVN-Revision: 17160	2009-08-07 00:08:06 +00:00
Felix Fietkau	7c32f45749	base-files: clean up init.d/fstab and port it to the new config_get ... also remove the unused noauto variable in swapon. Signed-off-by: Malte S. Stretz <mss@apache.org> SVN-Revision: 17159	2009-08-07 00:08:01 +00:00
Felix Fietkau	ae0745e240	base-files: port init.d/led to new config_get ... and don't call logger directly, rcS takes care of the correct redirection Signed-off-by: Malte S. Stretz <mss@apache.org> SVN-Revision: 17158	2009-08-07 00:07:56 +00:00
Felix Fietkau	2892e2f1d5	base-files: port init.d/boot to new config_get ... and localize some variables. Signed-off-by: Malte S. Stretz <mss@apache.org> SVN-Revision: 17157	2009-08-07 00:07:51 +00:00
Felix Fietkau	387b221aa1	base-files: port functions.sh to new config_get Signed-off-by: Malte S. Stretz <mss@apache.org> SVN-Revision: 17156	2009-08-07 00:07:46 +00:00
Felix Fietkau	4dbaccf0cd	base-files: allow default value for config_get Signed-off-by: Malte S. Stretz <mss@apache.org> Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 17155	2009-08-07 00:07:42 +00:00
Jo-Philipp Wich	3bb5ea71eb	base-files: ensure that ipv6 is loaded if interfaces have an ip6addr defined, clean trailing whitespace, bump pkg revision (#5356 ) SVN-Revision: 17118	2009-08-04 00:06:47 +00:00
Florian Fainelli	de3a491240	simplify action handling in rc.common (#5558 ) SVN-Revision: 17012	2009-07-26 12:34:09 +00:00
Vasilis Tsiligiannis	e5b097425d	udhcpc: Pass all events to udhcpc.user Petitboot and maybe other apps need to know when the dhcp lease is lost. Move the udhcpc.user call to send it all udhcpc events. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> SVN-Revision: 16815	2009-07-12 15:38:04 +00:00
Felix Fietkau	7a576b004e	allow udhcpc to work properly for interfaces that are not configured through uci SVN-Revision: 16664	2009-07-03 22:12:40 +00:00
Vasilis Tsiligiannis	baa9053e7a	base-files: Fix sysupgrade .tar.gz configuration restoring SVN-Revision: 16626	2009-06-29 21:13:05 +00:00
Jo-Philipp Wich	19c12174ee	base-files: ipcalc.sh: fix off-by-one in range-calculation SVN-Revision: 16619	2009-06-29 11:35:33 +00:00
Felix Fietkau	038807906f	change sysctl.conf to disable tcp ecn by default (based on discussion with marek who stumbled upon this, it creates hard-to-debug connectivity issues with providers/servers that still use buggy equipment) SVN-Revision: 16499	2009-06-17 21:57:07 +00:00
Jo-Philipp Wich	c6fe201fb6	sysupgrade: sync before mtd write, only fallback to sysrq-trigger if standard reboot fails SVN-Revision: 16488	2009-06-17 11:09:10 +00:00
Felix Fietkau	d196e4087e	udhcpc: add cidr routes support (patch from #5299 ) SVN-Revision: 16433	2009-06-13 14:42:47 +00:00
Vasilis Tsiligiannis	f4a81139b7	base-files: Add support for bzipped images in sysupgrade SVN-Revision: 16408	2009-06-10 22:34:14 +00:00
Vasilis Tsiligiannis	57d7cc7666	base-files: Detect and decompressed gzipped images automatically when flashing with sysupgrade SVN-Revision: 16407	2009-06-10 22:22:48 +00:00
Vasilis Tsiligiannis	d1f5700e78	base-files: format hexdump output instead of using awk for sysupgrade SVN-Revision: 16405	2009-06-10 21:52:07 +00:00
Vasilis Tsiligiannis	5b72dc3d8f	base-files: fix test experession for sysupgrade SVN-Revision: 16310	2009-06-03 18:15:04 +00:00
Felix Fietkau	642870d0cc	network: prevent unnecessary interface down/up cycles if no mac address change is requested SVN-Revision: 16269	2009-06-01 18:09:05 +00:00
Felix Fietkau	154ebf9380	network: do not unnecessarily touch interfaces configured as proto=none; bring down old aliases before setting up new ones SVN-Revision: 16266	2009-06-01 18:07:44 +00:00
Hamish Guthrie	590f3042fb	Removed extra ; in exec rule SVN-Revision: 16243	2009-06-01 08:48:37 +00:00
Florian Fainelli	0be2193e40	fix drivers firmware loading with the new hotplug2, patch from Russell Senior SVN-Revision: 16231	2009-05-31 12:08:15 +00:00
Gabor Juhos	9b5e65f101	base-files: set rules file for hotplug2 in the boot script (closes #5235 ) SVN-Revision: 16215	2009-05-30 17:09:41 +00:00
Gabor Juhos	463a6f4bda	base-files: update command line for the new hotplug2 SVN-Revision: 16154	2009-05-28 18:48:54 +00:00
Jo-Philipp Wich	2ee67f7272	base-files: fixup resolv.conf check in udhcpc script SVN-Revision: 15903	2009-05-17 17:56:26 +00:00
Nicolas Thill	06413b783e	base-files: initialize GZIPED to 0 in sysupgrade since it's used later in numeric comparisons SVN-Revision: 15890	2009-05-17 11:54:44 +00:00
Jo-Philipp Wich	af8500e97d	sysupgrade: use sysrq-trigger if available SVN-Revision: 15865	2009-05-15 12:10:26 +00:00
Jo-Philipp Wich	33c38fba27	base-files: - restore device, ifname and aliases state in dhcp script - make sure that resolv.conf.tmp is written once at least for statically configured dns SVN-Revision: 15753	2009-05-10 15:53:02 +00:00
Jo-Philipp Wich	d8aee6e471	base-files: show reboot notification is sysupgrade SVN-Revision: 15730	2009-05-09 01:54:09 +00:00
Jo-Philipp Wich	7da25b844c	Don't try to pivot to new ramfs if already running on one This patch allows the sysupgrade script to continue with the upgrade if openwrt is already running on a ramfs. This allows the use of the sysupgrade script as an _installer_ when running from an iso image. A user could boot the system from a bootable cd and invoke sysupgrade -n <URL> to write an image to the hard disk or CF. Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr> SVN-Revision: 15683	2009-05-07 13:51:45 +00:00
Jo-Philipp Wich	71e0f59b80	Add option in sysupgrade to flash gzipped images SVN-Revision: 15672	2009-05-07 13:27:10 +00:00
Jo-Philipp Wich	ca609a2431	base-files: replace udhcpc script with an improved version SVN-Revision: 15635	2009-05-06 12:51:12 +00:00
Felix Fietkau	cbd52550bd	rcS: wait for init scripts to complete before initiating the shutdown (patch from #5032 ) SVN-Revision: 15530	2009-04-30 22:59:18 +00:00
Jo-Philipp Wich	1c41493d74	base-files: make diag.sh stub working in bash SVN-Revision: 15527	2009-04-30 21:00:57 +00:00
Nicolas Thill	2fdeecdb47	add an explicit 'sysinit' tag for logging initscripts output, instead of '' that was logged as is SVN-Revision: 15323	2009-04-21 12:02:34 +00:00
Jo-Philipp Wich	f40eaba4df	fix broken logic in r15272, r15273 SVN-Revision: 15274	2009-04-19 17:12:02 +00:00
Jo-Philipp Wich	b0ea64c211	base-files: (#4928 ) handle "option gateway 0.0.0.0" and "option gateway interface" in route sections as "no gateway given" to allow defining gateway-less routes while still keeping the possibility to have static routes with a proper gateway on interfaces with# dynamic ips SVN-Revision: 15272	2009-04-19 16:51:58 +00:00
Felix Fietkau	34939cad39	get rid of $Id$ - it has never helped us and it has broken too many patches ;) SVN-Revision: 15242	2009-04-17 14:09:46 +00:00
Felix Fietkau	6397e188af	do not run hotplug event for aliases SVN-Revision: 15224	2009-04-13 00:43:23 +00:00
Jo-Philipp Wich	a03e00bbcf	base-files: remove redundant netmask handling in 10-routes SVN-Revision: 15219	2009-04-12 16:39:29 +00:00
Hauke Mehrtens	90fc200a60	In wifi_fixup_hwmode the value 11bg for hwmode was not transfered to bg. SVN-Revision: 15180	2009-04-09 20:16:01 +00:00
Felix Fietkau	cf152cff39	tweak some sysctl values for better performance SVN-Revision: 15129	2009-04-07 02:51:04 +00:00
Felix Fietkau	de0332f86a	rename our /bin/login script to /bin/login.sh to avoid collisions with busybox - we always use -l on telnetd anyway SVN-Revision: 15097	2009-04-04 09:35:55 +00:00
Felix Fietkau	714ffa3260	fix failsafe mode SVN-Revision: 15096	2009-04-04 09:35:49 +00:00
Felix Fietkau	6a50bf433a	udhcpc: run dhcp hotplug events after dns has been set SVN-Revision: 15095	2009-04-04 07:07:25 +00:00
Felix Fietkau	ca749bea97	wifi: fix hostapd + autochannel SVN-Revision: 15055	2009-03-27 21:14:59 +00:00
Jo-Philipp Wich	9a72419724	- fix mac assignment for broadcom vifs in bridging mode - thanks abramoff1 for spotting this - fix possible regression with different interface protocols - bump PKG_RELEASE SVN-Revision: 15042	2009-03-25 19:13:15 +00:00
Jo-Philipp Wich	7e6c947e4b	sync macs with vif bssids in broadcom.sh, fixes multi-ssid with wpa SVN-Revision: 15028	2009-03-24 23:42:09 +00:00
Michael Büsch	20b5626363	Allow running without "logger" installed SVN-Revision: 14938	2009-03-18 13:05:18 +00:00
Michael Büsch	088ea2fb6e	Support configurations without syslogd/klogd. SVN-Revision: 14937	2009-03-18 12:20:21 +00:00
Felix Fietkau	11cf9ea728	move input device nodes to /dev/input SVN-Revision: 14809	2009-03-09 15:06:15 +00:00
Jo-Philipp Wich	8a6acee2e2	sysupgrade: install /bin/sleep into ramdisk too and add completition notice (#4747 ) SVN-Revision: 14784	2009-03-08 00:21:25 +00:00
Hauke Mehrtens	3ac154fc9c	On shutdown disabled every mounted swap device. Fixes #4721 Thanks to Angel Marin SVN-Revision: 14770	2009-03-07 12:58:08 +00:00
Jo-Philipp Wich	2d672ef2f5	base-files: allow option dns to override dhcp assigned dns servers SVN-Revision: 14562	2009-02-19 05:27:36 +00:00
Florian Fainelli	1716050f0c	allow specifying port where to log (#2019 ) SVN-Revision: 14396	2009-02-03 20:26:00 +00:00
Jose Vasconcellos	58b8cdb5fd	Use block events for the mounting/unmounting of external storage devices. This handles both USB and IEEE1394 devices. It removes /sbin/usb-storage in favor of using the block hotplug event. There are dummy scripts to handle the plug in/out of USB and IEEE1394 devices for updating LEDs. Storage devices are mount as a sub-directory under /mnt. SVN-Revision: 14289	2009-01-30 20:48:42 +00:00
Florian Fainelli	b065bc5310	increase default size of the connection tracking table, thanks Marc SVN-Revision: 14283	2009-01-30 14:13:09 +00:00
Felix Fietkau	6d27b16e2b	fix $HOME in /etc/profile (#4424 ) SVN-Revision: 13914	2009-01-07 04:38:57 +00:00
Jo-Philipp Wich	341c1dbdf5	package/base-files: fix chmod of /tmp/.uci, bump package revision SVN-Revision: 13903	2009-01-06 21:53:45 +00:00
Jo-Philipp Wich	1cdaa2d3dc	allow ipv4 routes without gateway in configuration SVN-Revision: 13714	2008-12-22 02:21:25 +00:00
Jo-Philipp Wich	7c4f0fcbe7	package/base-files: allow ipv6 routes without gateway specified SVN-Revision: 13419	2008-11-28 22:45:16 +00:00
Felix Fietkau	5cc72a2874	fix up the network ifname in the network state when receiving iface/ifup events SVN-Revision: 13399	2008-11-28 16:18:11 +00:00
Felix Fietkau	7ac69660fe	fix ifup (no longer use the to-be-reverted state of the previous config) SVN-Revision: 13398	2008-11-28 16:13:23 +00:00
Jo-Philipp Wich	789848d327	Prevent "SIOCSIFHWADDR: Device or resource busy" when trying to change mac address SVN-Revision: 13258	2008-11-17 10:47:02 +00:00
Nicolas Thill	ac915623a6	make network config script work with brctl from both bridge-utils & busybox SVN-Revision: 13165	2008-11-09 22:48:56 +00:00
Travis Kemen	6103f88358	remove /tmp/resolv.conf.auto when ifup -a is called so that any old dns servers no longer in the config get cleared SVN-Revision: 13082	2008-10-29 20:31:14 +00:00
Felix Fietkau	9b75b9e35c	don't bring down interfaces when preparing them SVN-Revision: 13079	2008-10-29 17:26:59 +00:00
Felix Fietkau	a4f11ca22e	use pidfiles for hostapd/wpa_supplicant instead of killing all processes when bringing an interface down - fixes an issue with random hostapd death SVN-Revision: 13078	2008-10-29 17:26:49 +00:00
Felix Fietkau	c0e753bcdc	make sure that the dhcp client (or other processes necessary to get a connection) gets restarted when the wifi is restarted SVN-Revision: 13026	2008-10-23 01:07:35 +00:00
Felix Fietkau	2b2884293a	add option in sysupgrade to restore config from file or URL (patch from #4043 ) SVN-Revision: 12772	2008-09-28 19:45:59 +00:00
Felix Fietkau	e2daafdb1d	fix typo from last sysupgrade commit SVN-Revision: 12715	2008-09-26 08:58:43 +00:00
Travis Kemen	3770c99cf8	add switch to not save configuration over the reflash in noninteractive mode SVN-Revision: 12714	2008-09-26 00:10:01 +00:00
Felix Fietkau	7300d22877	install missing busybox symlinks for sysupgrade (patch by Frédéric Moulins) SVN-Revision: 12695	2008-09-25 11:31:35 +00:00
Felix Fietkau	35b92f0c99	don't emit ifup hotplug events on dhcp renew - use a new iface hotplug type 'update' instead; fixes #3906 SVN-Revision: 12671	2008-09-23 17:29:22 +00:00
Nicolas Thill	7218e6326f	make links to statup scripts in /etc/rc.d relative SVN-Revision: 12659	2008-09-23 12:35:34 +00:00
Felix Fietkau	f47a4a58c5	fix sysupgrade support for brcm-2.4 and brcm47xx make mtd refresh based config append optional (leave enabled on x86) SVN-Revision: 12657	2008-09-23 11:05:54 +00:00
Travis Kemen	91d3e6b05b	make option name optional SVN-Revision: 12585	2008-09-13 00:08:39 +00:00
Felix Fietkau	22585e578b	sysupgrade: add optional delay before rebooting SVN-Revision: 12572	2008-09-12 19:51:30 +00:00
Steven Barth	5a4e88710b	Prevent unwanted shell expansion SVN-Revision: 12568	2008-09-11 12:23:20 +00:00
John Crispin	6eefb5071d	fixes script that mounts usd storage when it gets attached SVN-Revision: 12548	2008-09-08 09:30:57 +00:00
John Crispin	38516cd780	fixes usb storage mounting SVN-Revision: 12465	2008-09-01 17:42:35 +00:00
Felix Fietkau	2176ae1a6f	fix a race condition which would leave dnsmasq in infinite resolving recursion nirvana SVN-Revision: 12424	2008-08-28 14:10:55 +00:00
John Crispin	12df593510	fixes broken if-then in led init script SVN-Revision: 12411	2008-08-27 20:33:13 +00:00
Florian Fainelli	1673462564	Use busybox mount, could be overriden to use util-linux-ng for instance, thanks sn9 SVN-Revision: 12386	2008-08-25 05:21:42 +00:00
Felix Fietkau	8a08f95e42	upgrade to uci 0.5.0, adds list handling support SVN-Revision: 12353	2008-08-20 15:38:51 +00:00
Nicolas Thill	257ee32b7d	disable ipv6 systcl call, as ipv6 is not enabled by default SVN-Revision: 12351	2008-08-20 15:29:11 +00:00
John Crispin	fd26ece7f1	fixes variables, oops SVN-Revision: 12344	2008-08-20 11:45:23 +00:00
John Crispin	3cf1a8932b	adds the option to have no proto for a interface, usefull if the uci states need to be set, but interface bring up is handled somewhere else SVN-Revision: 12343	2008-08-20 11:17:40 +00:00
Felix Fietkau	f27fd2ecc3	enable TCP ECN by default (see #3001 for more information) SVN-Revision: 12334	2008-08-17 13:01:59 +00:00
Travis Kemen	b3b5e54099	add /etc/firewall.user to be backed up becuase it is an example in /etc/config/firewall SVN-Revision: 12326	2008-08-16 18:01:18 +00:00
Travis Kemen	0b2111d1fb	remove /etc/firewall.* from being kept as they no longer are used in trunk SVN-Revision: 12320	2008-08-16 16:04:51 +00:00
Travis Kemen	99dd3e13fc	make opkg the default package manager, disable busybox ipkg from building by default SVN-Revision: 12319	2008-08-16 06:35:14 +00:00
Florian Fainelli	38d1cb8cbd	Fix negative calculation of the tmpfs for devices with few RAM (#3557 ) SVN-Revision: 12315	2008-08-14 22:21:35 +00:00
John Crispin	3403cbe948	remove /etc/functions.sh call from led hotplug script SVN-Revision: 12312	2008-08-14 19:07:22 +00:00
Felix Fietkau	c05eb4ba63	add basic interface alias support. for now (since we don't use ip in our network scripts yet), it adds :1, :2, ... alias interfaces this will change when we add support for the ip utility, but the config format will remain the same. example: config alias test option interface lan option ipaddr 192.168.1.1 option netmask 255.255.0.0 SVN-Revision: 12241	2008-08-07 15:28:48 +00:00
Steven Barth	6b6d027172	added support for the timer-trigger to uci LED support SVN-Revision: 12236	2008-08-07 11:01:46 +00:00
Mike Baker	1139608784	allow ctrl-c to trigger preinit SVN-Revision: 12231	2008-08-07 07:17:03 +00:00
John Crispin	72396bd614	add uci led support - /etc/config/system can hold led info which is applied at boot - adds /sbin/led.sh to set/clear leds via a name defined in /etc/config/system SVN-Revision: 12104	2008-08-04 22:56:46 +00:00
John Crispin	b73eedd62b	work aroung error message during boot if swapon is nt installed SVN-Revision: 12087	2008-08-04 08:50:16 +00:00
Felix Fietkau	8ff90e326e	network scripts: revert the network state after running ifdown, not before SVN-Revision: 12081	2008-08-03 21:00:01 +00:00
Felix Fietkau	aee15469df	use the same hotplug2 parameters for initramfs and regular SVN-Revision: 12059	2008-08-01 03:09:20 +00:00
Felix Fietkau	37c7e13a5f	move the hotplug2 kill command from preinit to /etc/init.d/boot, so that it works for initramfs as well SVN-Revision: 12058	2008-08-01 03:01:42 +00:00
Felix Fietkau	d98002bd59	avoid duplicate vlan add events SVN-Revision: 12057	2008-08-01 03:01:25 +00:00
Felix Fietkau	6a4edcadc1	fix config_clear(), see #3054 SVN-Revision: 12036	2008-07-31 03:04:32 +00:00
Felix Fietkau	11df62d176	link default routes added by the network scripts to the appropriate interface (#2621 ) SVN-Revision: 12027	2008-07-30 22:49:25 +00:00
Felix Fietkau	ee56e9ec59	network scripts: properly maintain the network state's list of assigned interfaces SVN-Revision: 12026	2008-07-30 22:39:56 +00:00
Felix Fietkau	8c453b693c	functions.sh: add list_contains function for checking whether a list contains a specific element SVN-Revision: 12025	2008-07-30 22:39:43 +00:00
Felix Fietkau	4d883da9bf	functions.sh: add a function for removing an item from a list in a shell variable SVN-Revision: 12024	2008-07-30 20:35:22 +00:00
Felix Fietkau	e606b1603b	properly keep track of bridged interfaces in the network state SVN-Revision: 12004	2008-07-30 05:22:02 +00:00
Andy Boyett	2ddbb426c8	Move packages lists to the ramdisk to save flash space - Lists now stored in /var/ipkg-lists/, `ipkg update' must be run after each boot before packages can be installed from feeds SVN-Revision: 11982	2008-07-29 03:36:23 +00:00
Travis Kemen	0425daa86d	keep /etc/group over reflash as well SVN-Revision: 11919	2008-07-24 16:36:39 +00:00
Travis Kemen	f20dd0803c	add dropbear keys, passwd and firewall configuration to be saved during reflash SVN-Revision: 11912	2008-07-24 02:24:59 +00:00
Nicolas Thill	a760ff5861	fix variable names in tests SVN-Revision: 11911	2008-07-22 21:19:05 +00:00
Travis Kemen	7346ef83e1	fix sysupgrade endian issues SVN-Revision: 11900	2008-07-22 01:11:30 +00:00
Yuji Mano	0b5f602421	Revert previous bad commit r11512 SVN-Revision: 11513	2008-06-16 19:37:00 +00:00
Yuji Mano	5ee48c0b00	Add the PS3 specific utility bl-option, a helper sctipt to get and set bootloader options in flash memory. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> SVN-Revision: 11512	2008-06-16 19:14:13 +00:00
John Crispin	0bf765b362	system now knows which timezone it is in SVN-Revision: 11445	2008-06-11 19:59:16 +00:00
John Crispin	51b28d44a9	use default gateway for routes that have no gw specified, Signed off by: Brian J. Murrell SVN-Revision: 11380	2008-06-06 18:49:23 +00:00
Felix Fietkau	036b397595	fix sysupgrade 'do_upgrade: not found' error SVN-Revision: 11362	2008-06-04 23:20:56 +00:00
Matteo Croce	ac8bf03f8e	create /etc/fstab on boot (closes #3458 ) SVN-Revision: 11225	2008-05-20 19:02:19 +00:00

... 6 7 8 9 10 ...

929 commits