Commit graph

26430 commits

Author SHA1 Message Date
Gabor Juhos
f85231257e ar71xx: fix bad RX sensitivity on newer TL-WDR4300 boards
On recent TL-WDR4300 boards the external LNAs of the 2.4GHz
interface are connected to GPIO lines. Because these GPIO
lines are disabled by default, the RX sensitivity of the
device is quite bad.

Setup the GPIOs of the external LNAs to fix the issue.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39392
2014-01-24 17:40:17 +00:00
Gabor Juhos
09bf46d418 ar71xx: image: generate sysupgrade images for the Compex boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39391
2014-01-24 17:15:03 +00:00
Gabor Juhos
252e906dda ar71xx: add sysupgrade support for the Compex boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39390
2014-01-24 17:15:02 +00:00
Gabor Juhos
0c0b87293e ar71xx: image: use a single firmware partition on Compex devices
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39389
2014-01-24 17:15:01 +00:00
Gabor Juhos
2995030b47 ar71xx: enable MTD_SPLIT_LZMA_FW option
It will be used for Compex devices.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39388
2014-01-24 17:15:01 +00:00
Gabor Juhos
89d60314e7 kernel/3.1x: add split code for LZMA compressed kernel based firmwares
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39387
2014-01-24 17:14:59 +00:00
Luka Perkov
64f3676a25 config: lxc: enable KERNEL_POSIX_MQUEUE
Recent lxc versions are not useful if this option is not enabled. That said,
enable KERNEL_POSIX_MQUEUE by default when KERNEL_LXC_MISC is selected.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39385
2014-01-24 13:49:39 +00:00
Gabor Juhos
998c89a9a6 ar71xx: image: detect partition sizes in the Image/Build/Ath macro
Get the size of the mtd partitions directly from the
MTD layout and remove the superfluous macro parameters.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39384
2014-01-24 11:59:35 +00:00
Gabor Juhos
4556632578 ar71xx: image: fix size verification in the CatFiles macro
The macro checks the size of the rootfs image even if
the second parameter of the macro contains the size of
an eraseblock. It is wrong because the size of the
kernel image will be adjusted to the next eraseblock
and the resulting image might be too large.

Fix the macro to check the size of the final image
instead of the rootfs image.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39383
2014-01-24 11:59:32 +00:00
Gabor Juhos
e89476e0a8 Revert "kernel: create firmware partition from MyLoader partition parser"
This reverts r38197.

The automatically created firmware partition includes
the partition_table partition. Apart from the partition
table, this partition contains sensitive data on some
Compex devices which data can be destroyed when the
firmware partition gets modified. Revert the change to
prevent that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39382
2014-01-24 08:48:10 +00:00
Luka Perkov
ad48ba11db uboot-envtools: add support for wndr3700
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39380
2014-01-24 00:07:48 +00:00
Gabor Juhos
56136c0f34 ar71xx: ap83: define mtd layout via command line
Also use the RKuImage macro becasue the original
firmware starts with the rootfs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39379
2014-01-23 16:47:42 +00:00
Gabor Juhos
a59e82761f ar71xx: ap81: define mtd layout via command line
Also use the RKuImage macro becasue the original
firmware starts with the rootfs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39378
2014-01-23 16:47:41 +00:00
Gabor Juhos
9f4e2bf326 ar71xx: image: show size limit in warning messages
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39376
2014-01-23 12:27:28 +00:00
Gabor Juhos
447530995a ar71xx: add initramfs image support for Compex devices
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39375
2014-01-23 12:23:10 +00:00
Gabor Juhos
b629009eaa ar71xx: wp543: use KEY_RESET code for the sw4 button
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39374
2014-01-23 12:23:08 +00:00
Luka Perkov
cbc892a549 ar71xx: create wndr3700 network config from uci-defaults
Since that was the last configuration in defconfig directory we can drop the
defconfig init script too.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39373
2014-01-23 11:33:42 +00:00
Luka Perkov
d66d2ad104 base-files: add ucidef_add_switch_port function
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39372
2014-01-23 11:33:41 +00:00
Steven Barth
3787078b26 odhcpd: fix certain config values being overwritten
Thanks to Hans Dedecker for the fix.

SVN-Revision: 39371
2014-01-23 11:02:18 +00:00
Steven Barth
e1c5111997 6rd: Make don't fragment bit (df) a configurable variable
Make the IPv4 "do not fragment" bit a configurable variable for the 6rd
tunnel interface as the bit should not be set in the encapsulating IPv4
header according to RFC3056.
On top the config variable allows to enable/disable path mtu discovery
for tunnel interfaces.
Config variable can be passed to netifd as tunnel config support is
already present for the "do not fragment" bit.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

SVN-Revision: 39370
2014-01-23 10:59:04 +00:00
Gabor Juhos
bbe086873a kernel/3.10: update pci_disable_usb_common_quirks patch
Fix build errors caused by undefined 'usb_disable_xhci_ports'
symbol.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39369
2014-01-23 09:07:49 +00:00
Gabor Juhos
53512a1961 mpc85xx: Fix building ramdisk images
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39368
2014-01-23 06:55:58 +00:00
Gabor Juhos
30af45d19a mpc85xx: Remove inittab workaround
The default inittab uses "askconsole" which is implemented by procd
and uses the console provided by the kernel command line.

Hence, this platform specific workaround is not necessary anymore.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39367
2014-01-23 06:55:50 +00:00
John Crispin
eceea6d6e1 ubox: revert log buffer size changes
the fix horribly broke existing setups

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39366
2014-01-22 15:33:16 +00:00
John Crispin
9dc6030316 ubox: update to latest git head
make sure log buffer size is not bigger than the ubus message size

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39365
2014-01-21 20:59:04 +00:00
Florian Fainelli
a747611fe3 brcm63xx: enable support for BCM63268
Support for the BCM63268 is usable, enable it by default.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39364
2014-01-21 18:50:26 +00:00
Florian Fainelli
eaa3e9ec6e brcm63xx: add support for BCM963269BHR board
Add kernel support for the BCM963269BHR board, USB and Ethernet switch,
LEDs and buttons are working.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39363
2014-01-21 18:50:11 +00:00
Florian Fainelli
fed4b02a68 brcm63xx: improve BCM63268 support
Allow using the HSSPI controller since it works just fine, as well as
the integrated switch core, since that one works too.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39362
2014-01-21 18:49:50 +00:00
Gabor Juhos
0b599c51cc ar71xx: mynet-n750: define LEDs connected to the AR8327 switch
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Patchwork: http://patchwork.openwrt.org/patch/4743/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39361
2014-01-21 17:17:42 +00:00
Zoltan Herpai
f3c07b8621 modules: swconfig.c: update the error path on 3.13, and behave nicely with return
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39360
2014-01-21 14:43:50 +00:00
Zoltan Herpai
4d26250db1 modules: update swconfig.c to compile on 3.13 (compile-tested)
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39359
2014-01-21 14:24:45 +00:00
Zoltan Herpai
a7a890d9e8 add missing symbols
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39358
2014-01-21 14:23:00 +00:00
Jonas Gorski
d5b4292032 kernel: ocf: add missing dependency for hifn driver
The HIFN driver is a PCI driver, thus requires PCI support to be enabled
to compile. Therefore let it depend on PCI..

Should fix mvebu builds.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39357
2014-01-21 12:11:18 +00:00
John Crispin
384a662e05 lantiq: fix unaligned access in vdsl firmware extractor
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39356
2014-01-21 09:51:16 +00:00
Zoltan Herpai
7ee639a81c add missing symbols
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39355
2014-01-21 07:53:11 +00:00
Hauke Mehrtens
1f4e6394ed b53: use drvdata to store driver data
we should not abuse the platform_data pointer.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39354
2014-01-20 20:01:22 +00:00
Hauke Mehrtens
de266cd1c1 b53: make b53_switch_reset_gpio() static
SVN-Revision: 39353
2014-01-20 19:07:18 +00:00
John Crispin
58dc9f593b procd: update to latest git head
Fixes OpenWrt bug #14832

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39352
2014-01-20 18:42:58 +00:00
Steven Barth
229d186490 netifd: don't add unnecessary NOP policy rules
SVN-Revision: 39351
2014-01-20 18:23:02 +00:00
Zoltan Herpai
2cf8391b75 update ocf patches - as ENT_DEBUG is removed, move the messages into pr_notice
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39350
2014-01-20 15:23:27 +00:00
Imre Kaloz
c89e789913 update/fixup overlayfs patch
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39349
2014-01-20 14:46:29 +00:00
Imre Kaloz
6bd1a37001 add initial 3.13 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39348
2014-01-20 13:56:24 +00:00
Steven Barth
c67ec51c85 6in4: fix typo in config variable (fixes #14830)
SVN-Revision: 39347
2014-01-20 12:53:15 +00:00
Gabor Juhos
506b40b628 ar71xx: tl-wr1043nd-v2: define LEDs connected to the AR8327 switch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39346
2014-01-20 10:23:06 +00:00
Gabor Juhos
c17cfab560 ar71xx: tl-wdr4300: define LEDs connected to the AR8327 switch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39345
2014-01-20 10:23:05 +00:00
Gabor Juhos
db5f22a2d7 ar71xx: set default LED config for the RB2011* boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39344
2014-01-20 10:23:04 +00:00
Gabor Juhos
927809e59b ar71xx: set status_led for the RB2011* boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39343
2014-01-20 10:23:03 +00:00
Gabor Juhos
07f76a164a ar71xx: fix indentation in diag.sh
Replace the leading spaces with tabs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39342
2014-01-20 10:23:02 +00:00
Gabor Juhos
4c54635106 ar71xx: rb2011: define LEDs connected to the AR8327 switch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39341
2014-01-20 10:23:01 +00:00
Gabor Juhos
31d6ad289f ar71xx: enable AR8327 LED support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39340
2014-01-20 10:23:00 +00:00