Commit graph

15 commits

Author SHA1 Message Date
Jonas Gorski
bc4dd8e119 brcm63xx: refresh patches
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43576
2014-12-08 16:11:26 +00:00
Jonas Gorski
b0ae41f849 brcm63xx: add DT support for TD-W8900GB
According to the vendor tarball, the TD-w8900GB's flash has 64k erase
block size, but CFE spans two blocks. So fixup the image offset
accordingly but keep block size at its default (64k).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: add commit message, add image offset, change nvram offset]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43572
2014-12-08 16:10:46 +00:00
Jonas Gorski
fb2a44df50 brcm63xx: refresh patches
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43363
2014-11-24 14:44:40 +00:00
Jonas Gorski
2bab3e2796 brcm63xx: move board compatible strings into a table
Move compatible strings from board structs into separate table. This
allows for several board compatibles to match to the same board in case
e.g. only the flash size / partitions differ.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43341
2014-11-22 12:25:52 +00:00
Jonas Gorski
14ebb012a4 brcm63xx: fix wrong fixups pointer
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42756
2014-10-03 11:03:58 +00:00
Jonas Gorski
2fa8a656a6 brcm63xx: update spw500v sprom to values from gpl tarball
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42740
2014-10-02 12:26:36 +00:00
Jonas Gorski
770ba9d40f brcm63xx: enable fallback sprom for Speedport W500 V
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42211
2014-08-18 21:50:45 +00:00
Jonas Gorski
43029544e2 brcm63xx: remove now obsolete board fixup code
Now that we migrated all users to dtb based detection, we can drop the
board fixup code.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42129
2014-08-11 11:37:26 +00:00
Jonas Gorski
74ec41ef59 brcm63xx: use dtb board detection for neufbox 4
This splits up neufbox 4 for now into two images, one for each OEM.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42128
2014-08-11 11:37:21 +00:00
Jonas Gorski
0aa242fe20 brcm63xx: replace CFEFIXUP usage with dtb based detection
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42125
2014-08-11 11:37:09 +00:00
Jonas Gorski
de8e3f2f86 brcm63xx: add and enable support for loading an appended dtb
Allow appending a dtb blob to the binary and use it for identifying the
board. Fall back to nvram based identification in case of no dtb passed.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42119
2014-08-11 11:36:48 +00:00
Jonas Gorski
97d0ed4faa brcm63xx: make board patch context less ambiguous
Make it less likely for quilt/patch to put boards into the "wrong"
section.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42117
2014-08-11 11:36:38 +00:00
Jonas Gorski
76746026b3 brcm63xx: rework fallback sprom support
Rework fallback sprom support by providing different sproms for
different chips. Also make it optional to use.

This likely causes sprom fallback support to break on a few boards.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41942
2014-08-01 21:56:38 +00:00
Jonas Gorski
43cc8c3ebe brcm63xx: allow bcm963xx and livebox support at the same time
Use the CFE_EPTSEAL to tell them apart at runtime. Added for now only
for the 3.14 until properly tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41296
2014-06-21 19:23:38 +00:00
Jonas Gorski
b519908e84 brcm63xx: update development kernel to linux 3.14
Now that 3.13 will be EOL soon, switch to 3.14.

Known issues:
 * 74x164 is not available because upstream dropped non-DT support
 * jffs2 breaks with SMP

Unknown issues:
 * probably plenty

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 40380
2014-04-04 10:17:08 +00:00
Renamed from target/linux/brcm63xx/patches-3.13/505-board_spw500v.patch (Browse further)