Commit graph

29396 commits

Author SHA1 Message Date
John Crispin
9d11a9e832 uqmi: update to latest git HEAD
this adds support for pin set/unlock/... and iccid.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43127
2014-10-31 11:02:06 +00:00
John Crispin
7589f4baef kernel/modules: add native vxlan package
More recent kernel versions (>= 3.12) support native VXLAN
support.

The Open VSwitch kernel module tries to build using native VXLAN
support if it detects a kernel version >=3.12.

The build works fine, but during startup the OVS kernel module
does not load.
dmesg output is something like this:
    [ 1201.262842] openvswitch: Unknown symbol vxlan_sock_release
    [ 1201.262949] openvswitch: Unknown symbol vxlan_xmit_skb
    [ 1201.263161] openvswitch: Unknown symbol vxlan_sock_add

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

SVN-Revision: 43126
2014-10-31 11:01:28 +00:00
John Crispin
1183af0c48 lantiq: vr9-vdsl-fw: properly write firmware to flash
Using a redirect to a non-empty mtd partition will not erase the
blocks prior to writing to them resulting in broken dsl_fw.
Fix this by piping to mtd write - /dev/mtdX instead.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43125
2014-10-31 11:00:42 +00:00
Steven Barth
8f877ff42b 6in4: https support for he.net tunnel api
HE.net tunnel update API requests are now made via https if an
SSL-capable wget is installed.  Certificate validation is
conditionally enabled if the CA certs are available.

Signed-off-by: Andrew Skalski <askalski@gmail.com>

SVN-Revision: 43124
2014-10-30 13:15:18 +00:00
Steven Barth
6a4a437e04 openssl: optimize build options, disable old SSL versions
Based on a patchset by Etienne CHAMPETIER <champetier.etienne@gmail.com>
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 43123
2014-10-30 13:11:04 +00:00
Zoltan Herpai
d7e981ca4c kernel: add missing symbols for 3.18
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43121
2014-10-30 10:15:20 +00:00
John Crispin
2f30ba5328 ralink: make sure a mii_bus is loaded before accesing its state
this caused a crash on boot

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43120
2014-10-30 10:10:57 +00:00
John Crispin
0b64dca49d ralink: load mt7530 driver on the 3 buffalo units
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43119
2014-10-30 10:10:51 +00:00
John Crispin
4654319964 procd: Allow boot messages to be sent to console
update to latest git HEAD, adds "log to console"

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43118
2014-10-30 10:10:45 +00:00
John Crispin
0b19244498 ralink: mt7530 - force wan port up
some bootloaders (linksys e1700) set wonky hw trap values. reset this upon boot to make all ports work.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43117
2014-10-30 08:44:00 +00:00
John Crispin
c466262d53 vgv7519: fix profile, this board have a rt2800-pci board
SVN-Revision: 43115
2014-10-30 08:08:09 +00:00
John Crispin
26e308019d ltq-vdsl-app: use VDSL tone-setup if annex is unset
I had to use a VDSL-only tone-setup to get show-time.
Handle this in uci by checking if annex is unset.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43114
2014-10-30 08:08:01 +00:00
John Crispin
38692d14f2 ralink: fix mt7530 for newer silicon revisions
latest mt7530 silicon seems to have a different phy id.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43113
2014-10-30 08:07:49 +00:00
John Crispin
ca28f9c515 mac80211: configuration: Better handling of LIB80211 configuration
OpenWRT patch 255-lib80211_kconfig_hacks gives user possiblity to select
LIB80211 dependant settings (LIB80211_CRYPT_*) without having LIB80211
selected which is wrong.
My patch changes OpenWRT patch so LIB80211 is vissible and all
LIB80211_CRYPT_* options selects LIB80211 automatically.

Signed-off-by: Tomasz Wasiak <tjwasiak@gmail.com>

SVN-Revision: 43112
2014-10-29 21:04:30 +00:00
John Crispin
9205c6da4b ca-certificates: Update to Version 20141019
Update to Version 20141019

Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>

SVN-Revision: 43111
2014-10-29 21:01:26 +00:00
John Crispin
36e862da17 lantiq: vgv7519: fix board_config on dts, read mac address and set
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 43109
2014-10-29 20:50:40 +00:00
John Crispin
152d692a1f ramips: improve ralink ethernet driver
Change list:
* add tx scatter gather function.
* add software rx vlan offload to let GRO work.
* add jumbo frame support. because use build_skb so max MTU is 3812.
* enable hardware tx vlan.
* enable GRO and remove LRO. because it can improve performance and can work on forwarding.
* enable/fix tx padding function.
* let napi handle tx clean up.
* support ethtool operation. now support message level, hardware status and coalesce.
* ethtool support use mdio to get phy status only on mt7620. need modify dts file and add phy info to support it.

Notes:
* build and test on rt2880, rt3052, rt3352, rt3662, rt5350 and mt7620a.
* TCP NAT performance improve. test with netperf.
  - rt2880(gigabit) from 5x to 12x Mbps.
  - rt3x5x from 6x to 94 Mbps.
  - rt5250 from 5x to 8x Mbps.
  - rt3662(gigabit) from 6x to 42x Mbps with GRO. 23x Mbps without GRO. 66x Mbps with jumbo frame.
  - mt7620 still 94Mbps.
* TSO function not tested. because i don't have mt7620 with eco >= 5. and the hardware don't support to set MSS. it will have problem.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 43108
2014-10-29 19:43:59 +00:00
John Crispin
62107ff367 swconfig: last vs tail
sorry .....

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43107
2014-10-29 19:24:16 +00:00
John Crispin
ab5d70e046 swconfig: "swconfig list" shows devices in reverse order
Boards that have more than one swconfig enabled switch will show the devices in
reverse order when call swconfig list. Fix this by using list_add_tail().

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43106
2014-10-29 18:51:06 +00:00
John Crispin
c0bf47232a ralink: fix switch config on mt7530 evb
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43105
2014-10-29 18:51:02 +00:00
John Crispin
8223e78121 ralink: fix a off by 4 bug in mt7530
0x8100000c vs 0x810000c0 int he pvc register this caused the cascade with an external mt7530 to fail.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43104
2014-10-29 18:49:46 +00:00
John Crispin
fd5873eb33 Add support for DHT11 driver
The DHT11 is a temperature and humidity sensor supported by linux
since 3.14.

This patch is tested on recent mxs with kernel 3.14.18.

Signed-off-by: Harald Geyer <harald@ccbib.org>

SVN-Revision: 43103
2014-10-29 15:02:38 +00:00
John Crispin
d0bf15f235 ramips: add support for A5-V11 board (resubmit)
(Reposted due to an issue with the patchwork server during original submission)

Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by Bococom (or at least uses Bococom image encryption - as used on poray devices - but different key)

Signed-off-by: Gareth Bryan <gareth@mx9.org>

SVN-Revision: 43102
2014-10-29 11:01:17 +00:00
John Crispin
9762c54914 lantiq_dsl.sh: properly detect vdsl_cpe_control and add missing quotes
lantiq_dsl.sh didn't work with VDSL chipsets for now, fix that by
detecting whether vdsl_cpe_control or dsl_cpe_control should be used.
Also add missing quotes around shell string comparision.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43101
2014-10-29 08:23:47 +00:00
Rafał Miłecki
0100a8a68e brcm47xx: initial support for kernel 3.18
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43100
2014-10-28 10:26:00 +00:00
Hauke Mehrtens
fb543b63a9 kernel: add closing " to REGMAP_I2C's tristate
Thanks swalker for reporting.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43099
2014-10-27 23:14:21 +00:00
Hauke Mehrtens
f12c4b0815 bcm53xx: remove support for fpu
This SoC does not have a vfpv3 FPU.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43098
2014-10-27 23:04:07 +00:00
Hauke Mehrtens
7fc9bb1aca bcm53xx: initial support for kernel 3.18
This adds initial support for kernel 3.18.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43097
2014-10-27 23:02:08 +00:00
Hauke Mehrtens
d8d692342f kernel: add generic config for kernel 3.18
There are still many options missing.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43096
2014-10-27 22:58:12 +00:00
Hauke Mehrtens
a76ee3b1d5 kernel: make the kernel 3.18 patches apply and boot on arm.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43095
2014-10-27 22:55:39 +00:00
Rafał Miłecki
cea2b5299b kernel: make it possible to select experimental 3.18 (3.18-rc2)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43094
2014-10-27 18:16:45 +00:00
Rafał Miłecki
1513b39a8c kernel: start working on 3.18 support
This commit:
1) Copies 3.14 patches
2) Drops mainlined stuff
3) Modifies some patches to apply

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43093
2014-10-27 18:14:39 +00:00
Jo-Philipp Wich
38e72c779e iwinfo: add cli support for phy lookup from uci section
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 43092
2014-10-27 16:35:41 +00:00
Rafał Miłecki
e168852ed9 kernel: 3.14: use patch that is really upstreamed for hso 0af0:9200
Patch 060 we had in repo was never sent/accepted.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43091
2014-10-27 16:00:36 +00:00
John Crispin
51f8a1cfc5 fstools: update to latest git head
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43090
2014-10-27 15:51:33 +00:00
John Crispin
6dc6e4ed08 libiconv: do not replace untranslatable characters with * or ?
Instead throw an -EILSEQ error.

Signed-off-by: Tjalling Hattink <t.hattink@fugro.nl>

SVN-Revision: 43089
2014-10-27 15:51:25 +00:00
John Crispin
5a6433cc6c base-files: config_generate did not handle setups with more than 1 switch properly
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43088
2014-10-27 15:51:17 +00:00
Jo-Philipp Wich
6149caf01e iwinfo: switch to external git repo, support lookup by phyname & macaddr
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 43087
2014-10-27 14:35:44 +00:00
Jo-Philipp Wich
1eb6640612 config: use PARTUUID by default on x86_64
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 43086
2014-10-27 14:35:39 +00:00
Jo-Philipp Wich
2ab0dae991 busybox: make high ASCII chars printable (#7993)
Currently busybox utils like "ls" fail to display filenames containing UTF-8
characters, replacing any special characters with "?".

Change libbb's printable_string() function to allow high ASCII characters so
that unicode filenames are displayed correctls.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 43084
2014-10-27 11:22:15 +00:00
Jo-Philipp Wich
9b1ad94f1c px5g-standalone: use /dev/urandom to initialize serial (#18232)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 43080
2014-10-27 11:07:38 +00:00
Felix Fietkau
e6da32c086 mac80211: fix key flush handling in AP+STA
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43079
2014-10-27 11:02:23 +00:00
Jo-Philipp Wich
ba48074622 uhttpd: fix HTTP incompatibilities in file handler
* Fixes sending an extraneous message body for 204 and 304 resoponses which
   breaks Chrome in keep-alive mode.

 * Adds mimetypes for JSON and JSONP.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 43078
2014-10-27 10:25:07 +00:00
John Crispin
f967a49dd0 e2fsprogs: fix description, tune2fs is not part of the e2fsprogs package
https://dev.openwrt.org/ticket/18209

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43076
2014-10-26 18:15:25 +00:00
John Crispin
c997410461 mpc85xx: fix WAN/LAN-MAC for TP-LINK TL-WDR4900 v1
This works around a bootloader issue where every device
has the same lan/wan-mac 00:04:9f:ef:01:01 - with this patch
we read the macs from config-partition during initial network
setup. We have 9 valid macs stored in the partition, the
1st two are used for the radios, 3 and 4 are now used for WAN/LAN.

on an already setup / running device we can get the real macs with
. /lib/functions.sh
. /lib/functions/system.sh
echo "LAN = $(mtd_get_mac_binary config 338)"
echo "WAN = $(mtd_get_mac_binary config 344)"

see:
https://dev.openwrt.org/ticket/14714

from the ticket / user klondike:
U-Boot passed this commit ecd1a09b81
http://u-boot.10912.n7.nabble.com/U-Boot-PATCH-mpc83xx-remove-hardcoded-network-addresses-from-config-files-td44372.html
I suppose to prevent this particular issue, but the WDR4900 may be using an old bootloader still affected.
                                                                   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

I have been checking the contents of the dtb on the flash, this particular bit is quite revealing:

ethernet@b0000 {
                        #address-cells = <0x1>;
                        #size-cells = <0x1>;
                        device_type = "network";
                        model = "eTSEC";
                        compatible = "fsl,etsec2";
                        fsl,num_rx_queues = <0x8>;
                        fsl,num_tx_queues = <0x8>;
                        local-mac-address = [00 00 00 00 00 00];
                                             ^^^^^^^^^^^^^^^^^

                        interrupt-parent = <0x2>;
                        phy-handle = <0x3>;
                        phy-connection-type = "rgmii-id";
                        ptimer-handle = <0x4>;

                        queue-group@0 {
                                #address-cells = <0x1>;
                                #size-cells = <0x1>;
                                reg = <0xb0000 0x1000>;
                                rx-bit-map = <0xff>;
                                tx-bit-map = <0xff>;
                                interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
                        };
                };

I also have been checking the live device map to find this:

root@GHS-AP3:~# hexdump -C /proc/device-tree/soc@ffe00000/ethernet@b0000/local-mac-address
00000000  00 04 9f ef 01 01                                 |......|
00000006
root@GHS-AP3:~# hexdump -C /proc/device-tree/soc@ffe00000/ethernet@b1000/local-mac-address
*
root@GHS-AP3:~# hexdump -C /proc/device-tree/soc@ffe00000/ethernet@b2000/local-mac-address
*

My conclussion is that U-Boot most likely finds the device and (as no valid MAC-address is provided)
falls back to the default MAC provided by the old code, the kernel then receives thee modified
device map from U-Boot and assumes this is the correct MAC for the device despite it obviously isn't.

This can be seen at
target/linux/mpc85xx/patches-3.10/140-powerpc-85xx-tl-wdr4900-v1-support.patch

The enetaddr is filled up by using the device tree data by the process_boot_dtb
function and used by the platform_fixups function to set the eth0 address
(by calling dt_fixup_mac_address_by_alias("ethernet0", enetaddr); ).
But instead we should be used the device address which to my understanding is
provided in the mtd.

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43074
2014-10-26 17:58:53 +00:00
John Crispin
d1a1ad3e66 ramips: fix filenames in PorayDualSize factory images
SVN-Revision: 43073
2014-10-26 17:18:45 +00:00
John Crispin
4d7ae64b73 vgv7519: support more recent board release with vrx288 v1.2
The existance of this new board has been confirmed and tested by the guy on this commit

76fdd8e638

SVN-Revision: 43072
2014-10-26 17:18:41 +00:00
John Crispin
27570407f4 comgt: fix typo in the ncm proto handler
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43071
2014-10-26 16:57:38 +00:00
John Crispin
eb738f5275 generate list of license information for packages
Many packages define already metadata about their license (PKG_LICENSE),
but this is only included in the ipk files.

This change allows to create the information also on the build-host,
to get an overview on the used licenses.
In the full list, also all packages without this info are shown

Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>

SVN-Revision: 43070
2014-10-26 16:57:33 +00:00
John Crispin
f9a06347df util-linux-dmesg: Add missing install section
Package util-linux-dmesg is broken (at least) in Barrier Breaker git repo
as you can select it within menuconfig, it will compile (as a part of
util-linux) but it will not install as install section is missing from
package Makefile.

Signed-off-by: Tomasz Wasiak <tjwasiak@gmail.com>

SVN-Revision: 43069
2014-10-26 16:57:27 +00:00