Commit graph

42769 commits

Author SHA1 Message Date
Mathias Kresin
287b7aa583 ramips: drop obsolete sd card driver code
The pinmux for all SoCs using this driver is now set via the pinmux. It
makes this code obsolete.

Some of the code targeting the mt76x8 SoCs is still required. The sd
card pins share the pads with the EPHY. These pads need to be switched
to digital mode if the pins are used for sd cards.

The eMMC 8-bit mode has to be enabled via pinmux instead of a kernel
option. The uart2 group need to be set to function "sdxc d5 d4", pwm1
to "sdxc d6" and pwm0 to "sdxc d7" to do so. It can't be done by as
part of a default pinmux, as it would break the normal operation of
uart2.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-09-06 21:35:53 +02:00
Mathias Kresin
563a5b5f94 ramips: add mt7620/1 sdhci pinmux
Set the pins to the required mode via the pinmux driver. It allows to
get rid of the pinmux related code in the sd card driver.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-09-06 21:35:53 +02:00
Mathias Kresin
a14097e8e0 ramips: fix mt7620a ND/SD pins pinmuxes
Drop the nd_sd gpio pinmux in case sdcard is used. They're mutually
exclusive and for most of the boards not even used as GPIOs.

If the pins are in sdcard mode, the pins ND_WE_N and ND_CS_N are still
GPIOs (#45 and #46).

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-09-06 21:35:53 +02:00
Mathias Kresin
2cc7980dcb ramips: reference node by label
Reference the HC5661A sdhci node by label instead of by the full path.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-09-06 21:35:53 +02:00
Mathias Kresin
1d08951628 ramips: add rt3352 SPI_CS1 pinmux
The rt3352 has a pin that can be used as second spi chip select,
watchdog reset or GPIO. The pinmux setup was missing the definition of
said pin but it is already used in the SoC dtsi.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-09-06 21:35:53 +02:00
Henrique de Moraes Holschuh
ca1b347691 dnsmasq: allow dnsmasq variants to be included in image
The dnsmasq variants should provide dnsmasq, otherwise it is impossible
to include them in the image.

This change allows one to have CONFIG_PACKAGE_dnsmasq=m and
CONFIG_PACKAGE_dnsmasq-full=y, e.g. because you want DNSSEC support, or
IPSETs suport on your 3000-devices fleet ;-)

Signed-off-by: Henrique de Moraes Holschuh <henrique@nic.br>
2018-09-06 17:57:59 +02:00
Hans Dedecker
3d377f4375 dnsmasq: bump to dnsmasq v2.80test5
Refresh patches
Remove 240-ubus patch as upstream accepted.
Add uci option ubus which allows to enable/disable ubus support (enabled
by default)

Upstream commits since last bump:

da8b651 Implement --address=/example.com/#
c5db8f9 Tidy 7f876b64c22b2b18412e2e3d8506ee33e42db7c
974a6d0 Add --caa-record
b758b67 Improve logging of RRs from --dns-rr.
9bafdc6 Tidy up file parsing code.
97f876b Properly deal with unaligned addresses in DHCPv6 packets.
cbfbd17 Fix broken DNSSEC records in previous.
b6f926f Don't return NXDOMAIN to empty non-terminals.
c822620 Add --dhcp-name-match
397c050 Handle case of --auth-zone but no --auth-server.
1682d15 Add missing EDNS0 section. EDNS0 section missing in replies to EDNS0-containing queries where answer generated from --local=/<domain>/
dd33e98 Fix crash parsing a --synth-domain with no prefix. Problem introduced in 2.79/6b2b564ac34cb3c862f168e6b1457f9f0b9ca69c
c16d966 Add copyright to src/metrics.h
1dfed16 Remove C99 only code.
6f835ed Format fixes - ubus.c
9d6fd17 dnsmasq.c fix OPT_UBUS option usage
8c1b6a5 New metrics and ubus files.
8dcdb33 Add --enable-ubus option.
aba8bbb Add collection of metrics
caf4d57 Add OpenWRT ubus patch

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-09-06 15:48:13 +02:00
Stijn Tintel
067e2f5f1d strace: fix build on aarch64
As of version 4.21, strace enforces mpers by default. The current
implementation of aarch64 compat in strace assumes it's identical to
ARMv7 EABI and therefore tries to enable m32 personality support. As
there is no -m32 support on aarch64, this causes the build to fail.

Restore previous strace behavior to fix build on aarch64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Tested-by: Karl Palsson <karlp@tweak.net.au>
2018-09-05 23:49:15 +02:00
Hans Dedecker
ecc3165cbc odhcpd: bump to git HEAD (detect broken hostnames)
881f66b odhcpd: detect broken hostnames
3e17fd9 config: fix odhcpd_attrs array size

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-09-05 11:04:19 +02:00
Felix Fietkau
36c6ba3735 imx6: use BUILD_DEVICES in uboot-imx6 for mx6cuboxi
Fixes build with the default profile

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-05 10:00:01 +02:00
Felix Fietkau
b9f926e151 imx6: rename Generic profile to Default, fixes u-boot image build issue
u-boot.mk checks for the Default profile to build images for all targets.
This brings the target default profile in sync with other targets

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-05 10:00:01 +02:00
Jason A. Donenfeld
4ccbe7de6c wireguard: bump to 0.0.20180904
* Kconfig: use new-style help marker
* global: run through clang-format
* uapi: reformat
* global: satisfy check_patch.pl errors
* global: prefer sizeof(*pointer) when possible
* global: always find OOM unlikely

Tons of style cleanups.

* crypto: use unaligned helpers

We now avoid unaligned accesses for generic users of the crypto API.

* crypto: import zinc

More style cleanups and a rearrangement of the crypto routines to fit how this
is going to work upstream. This required some fairly big changes to our build
system, so there may be some build errors we'll have to address in subsequent
snapshots.

* compat: rng_is_initialized made it into 4.19

We therefore don't need it in the compat layer anymore.

* curve25519-hacl64: use formally verified C for comparisons

The previous code had been proved in Z3, but this new code from upstream
KreMLin is directly generated from the F*, which is preferable. The
assembly generated is identical.

* curve25519-x86_64: let the compiler decide when/how to load constants

Small performance boost.

* curve25519-arm: reformat
* curve25519-arm: cleanups from lkml
* curve25519-arm: add spaces after commas
* curve25519-arm: use ordinary prolog and epilogue
* curve25519-arm: do not waste 32 bytes of stack
* curve25519-arm: prefix immediates with #

This incorporates ASM nits from upstream review.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2018-09-05 08:52:36 +02:00
Matthias Schiffer
b452af23a8
mpc85xx: add migration script for TP-Link TL-WDR4900 v1 WLAN PCI paths
PCI paths of the WLAN devices have changed between kernel 4.4 and 4.9;
migrate config so existing wifi-iface definitions don't break.

This is implemented as a hotplug handler rather than a uci-defaults script
as the migration script must run before the 10-wifi-detect hotplug handler.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-09-04 21:27:27 +02:00
Alexander Couzens
967d6460c0
hostapd: fix build of wpa-supplicant-p2p
VARIANT:= got removed by accident.

Fixes: 3838b16943 ("hostapd: fix conflicts hell")
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2018-09-03 21:51:06 +02:00
Felix Fietkau
ded905ce43 imx6: extend cubox support to hummingboard, add support for building full images
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-03 12:06:24 +02:00
Felix Fietkau
8c41f1f81c imx6: enable f2fs and loopback support in preparation for squashfs with overlay support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-03 12:06:24 +02:00
Felix Fietkau
00f030a9c6 build: add support for enabling the rootfs/boot partition size option via target feature
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-03 12:06:24 +02:00
Felix Fietkau
7165378d19 uboot-imx6: fall back to MMC for SPL if boot mode is invalid
Fixes boot on Hummingboard

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-03 12:06:24 +02:00
Felix Fietkau
aa3efca8d9 uboot-imx6: remove obsolete patch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-03 12:06:24 +02:00
Felix Fietkau
eab7bcc8e1 uboot-imx6: install images into STAGING_DIR_IMAGE
Will be used by a new combined image for cubox

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-03 12:06:24 +02:00
Felix Fietkau
b605a84a74 ramips: ethernet: unify tx descriptor buffer splitting
A buffer is split into multiple descriptors if it exceeds 16 KB.
Apply the same split for the skb head as well (to deal with corner cases
on fraglist support)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-03 12:06:24 +02:00
Hans Dedecker
17c9b72046 nghttp2: bump to 1.33.0
9d843334 Update bash_completion
23cb3f38 Update manual pages
1d682dcd Bump up version number to 1.33.0, LT revision to 31:0:17
601fbbb4 Update doc
f44aa246 Update AUTHORS
dd74a6dd Update manual pages
e959e733 src: Refactor utos
fb9a204d nghttpx: Fix compile error without mruby
cd096802 Update doc
7417fd71 nghttpx: Per-pattern not per-backend
2d1a981c Merge branch 'akonskarm-master'
45acc922 clang-format
214d0899 Merge branch 'master' of https://github.com/akonskarm/nghttp2 into akonskarm-master
31fd707d nghttpx: Fix broken healthmon frontend
9a2e38e0 fix code for reuse addr on asio client
d24527e7 Bump up LT revision due to v1.32.1 release
6195d747 nghttpx: Share mruby context if it is compiled from same file
fb97f596 nghttpx: Allocate mruby file because fopen requires NULL terminated string
0ccc7a77 nghttpx: Move blocked request data to request buffer for API request
32826466 nghttpx: Fix crash with API request
0422f8a8 nghttpx: Fix worker process crash with neverbleed write error
e329479a Merge pull request #1215 from nghttp2/mruby-per-backend
f80a7873 Merge branch 'akonskarm-reuse_addr'
866ac6ab add option reuse addr in local endpoint configuration of asio client
b574ae6a nghttpx: Support per-backend mruby script
de4fd7cd doc: Update doc
32d7883c nghttpx: Downstream::request_buf_full: take into account blocked_request_buf_
9b24e197 nghttpx: Choose h1 protocol if headers have been sent to backend on retry
13ffece1 Merge pull request #1214 from nghttp2/fix-rst-without-dconn
9d5b781d Fix stream reset if data from client is arrived before dconn is attached

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-09-03 10:46:20 +02:00
Kevin Darbyshire-Bryant
dc9388ac55 iproute2: update cake man page
CAKE supports overriding of its internal classification of
packets through the tc filter mechanism.

Update the man page in our package, even though we don't
build them.  Someone may find the documentation useful.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(cherry picked from commit 30598a05385b0ac2380dd4f30037a9f9d0318cf2)
2018-08-31 15:30:28 +07:00
Kevin Darbyshire-Bryant
721dfd4eb8 kmod-sched-cake: bump to 20180827
Expand filter flow mapping to include hosts as well

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(cherry picked from commit d14ffdc307d36bd9abe908b46ff7baece54c9551)
2018-08-31 15:30:27 +07:00
Jo-Philipp Wich
555c592304 ppp: remove hardcoded lcp-echo-failure, lcp-echo-interval values
OpenWrt used to ship hardcoded defaults for lcp-echo-failure and
lcp-echo-interval in the non-uci /etc/ppp/options file.

These values break uci support for *disabling* LCP echos through
the use of "option keepalive 0" as either omitting the keepalive
option or setting it to 0 will result in no lcp-echo-* flags
getting passed to the pppd cmdline, causing the pppd process to
revert to the defaults in /etc/ppp/options.

Address this issue by letting the uci "keepalive" option default
to the former hardcoded values "5, 1" and by removing the fixed
lcp-echo-failure and lcp-echo-interval settings from the
/etc/ppp/options files.

Ref: https://github.com/openwrt/luci/issues/2112
Ref: https://dev.archive.openwrt.org/ticket/2373.html
Ref: https://bugs.openwrt.org/index.php?do=details&task_id=854
Ref: https://bugs.openwrt.org/index.php?do=details&task_id=1259
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-08-30 15:19:45 +02:00
Jo-Philipp Wich
4302c917cc Revert "ramips: mmc: Fix init for MT7628AN"
This reverts commit 3a8efaef00.

The change reportedly breaks UART2 on some boards. Furthermore it uses
bitwise logic on an uninitialized variable and fails to explain what it
is fixing exactly.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-08-30 13:19:26 +02:00
Jo-Philipp Wich
77e2bccde8 ramips: only limit lzma dictionary size on mt7621
The changed dictionary size leads to a different LZMA header which breaks
sysupgrade image magic checkibng on at least some RT288x boards.

Since the commit message only mentions testing on MT7621 and since the
change appears to break at least one other ramips subtarget, do not take
any chances and restrict the size limitation to only MT7621.

Fixes FS#1797
Fixes 09b6755946 ("ramips: limit dictionary size for lzma compression")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-08-30 10:57:35 +02:00
Mathias Kresin
a6e11ccb13 ramips: fix rt3883 pinmux for second SPI
The rt3883 doesn't have a pinmux group named spi_cs1. The cs1 is part
of the pci group. The function pci-func enables the second chip select.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-29 21:00:58 +02:00
Mathias Kresin
dcdc6d9dad ramips: fix rt3883 pci pinmux
The PCI pins need to be set to "PCI Host support one device" to allow
the use of one PCI device and flash memory.

The pci-fnc function is intended to be used if no PCI is used but
flash, nand or the codec functionality is.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-29 21:00:58 +02:00
Jo-Philipp Wich
5ebcd32997 scripts: bundle-libraries: fix logic flaw
Previous refactoring of the script moved the LDSO detection into a
file-not-exists condition, causing onyl the very first executable to
get bundled.

Solve the problem by unconditionally checking for LDSO again.

Fixes: 9030a78a71 ("scripts: bundle-libraries: prevent loading host locales")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-08-29 14:19:43 +02:00
Thomas Equeter
acedce1d79 uqmi: wait for the control device too
The control device /dev/cdc-wdm0 is not available immediately on the
D-Link DWR-921 Rev.C3, therefore the wwan interface fails to start at
boot with a "The specified control device does not exist" error.

This patch alters /lib/netifd/proto/qmi.sh to wait for
network.wwan.delay earlier, before checking for the control device,
instead of just before interacting with the modem.

One still has to use network.wwan.proto='qmi', as the "wwan" proto
performs that sort of check before any delay is possible, failing with a
"No valid device was found" error.

Signed-off-by: Thomas Equeter <tequeter@users.noreply.github.com>
2018-08-29 13:10:12 +02:00
Freddy Leitner
7aa5dc46ee apm821xx: MBL: load kernel/dtb from SATA 0:1 first
This remedies an issue with the MBL Duo if both disks are inserted
and contain OpenWrt. kernel and dtb would be loaded from SATA 1:1
while rootfs (/dev/sda2) would be mounted on SATA 0:1.

Such a mix&match would obviously only work if both OpenWrt versions/
builds are identical, and especially fail after sysupgrade upgraded
the system disk on SATA 0:1.

The fallback to SATA 1:1 needs to be kept for MBL Single (only has
SATA 1:1) and MBL Duo with one disk inserted on SATA 1:1. To speed
up booting in those cases, the unneccesarily doubled "sata init"
will only be called once. (In theory it could be omitted completely
since the on-flash boot script already initializes SATA to load the
on-disk boot script.)

Tested on MBL Duo (all possible combination of disks) and MBL Single

Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Freddy Leitner <hello@square.wf>
2018-08-29 09:43:10 +02:00
Mathias Kresin
c134210b8f ramips: drop pointless default led definitions
The LEDs should be triggered/lit by any kind of state change instead of
turned on/off unconditional.

If LEDs really need to be turned off by default, it should be done via
the default-state devicetree led property.

The handling of the wndr3700v5 and wt3020 power led is at least
strange. Something is for sure wrong with them. Either the leds are
misnamed, the default off trigger is a typo or the polarity of the
gpios is wrong. Drop the power led from userspace and wait for someone
with access to the hardware to fix it properly.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-29 09:39:32 +02:00
Mathias Kresin
43df31f64d ramips: add missing zbt-cpe102 diag led
Based on the userspace led configuration it's quite obvious that the
4g-0 led should be used for boot status indication.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-29 09:34:09 +02:00
Mathias Kresin
99045dfc59 ramips: express diag led handling via devicetree
Use the default-state property to express the desired led handling in
the devicetree source file instead of the userspace.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-29 09:34:07 +02:00
Mathias Kresin
111907e8d3 ramips: remove default on userspace trigger for diag leds
All the LEDs are turned on by diag.sh at the end of the boot process.
No need to do the same via userspace configuration again.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-29 09:26:24 +02:00
Mathias Kresin
56e6ebdea4 ramips: fix multi colour led handling
All boards either have a multi colour led or a single lightpipe. It
makes it impossible to handle the LEDs individual. Change the LED
config for these boards to take it into account.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-29 09:24:49 +02:00
Mathias Kresin
fe1e90deb4 ramips: rt-n12p: use the boardname helper variable
Use the helper variable for the Asus RT-N12P as it is done by all
boards.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-29 09:23:11 +02:00
Giuseppe Lippolis
774d7fc9f2 comgt: increase timeout on runcommands
Some combination of modem/wireless operator requires more time to
execute the commands.
Tested on DWR-512 embedded wwan modem and italian operator iliad (new
virtual operator).

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
2018-08-29 08:34:10 +02:00
Paul Wassi
1bd6b91e0f base-files: provide more tolerant xterm detection
Set the window title not only in "xterm", but also in
e.g. "xterm-256color", "xterm-color", etc.
The case statement is taken from Debian / Ubuntu.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2018-08-29 08:33:54 +02:00
Bruno Randolf
fe960cead7 ugps: Update to fix position calculation
This is necessary to get my position right.
Without this my longitude is incorrecty -15.85xxxx instead of -16.52yyyy

Signed-off-by: Bruno Randolf <br1@einfach.org>
2018-08-29 08:31:10 +02:00
Bruno Randolf
6b14a73f4f ugps: Add option disabled
Like many other packages, an option to disable can be practical.

Signed-off-by: Bruno Randolf <br1@einfach.org>
2018-08-29 08:31:10 +02:00
Koen Vandeputte
01793e8752 kernel: bump 4.14 to 4.14.67
Refreshed all patches.

Removed upstreamed patches:
- 037-v4.18-0008-ARM-dts-BCM5301x-Fix-i2c-controller-interrupt-type.patch

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-08-28 23:05:39 +02:00
Koen Vandeputte
22f899c6dd kernel: bump 4.9 to 4.9.124
Refreshed all patches.

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-08-28 23:05:39 +02:00
Koen Vandeputte
23366b6dc6 mediatek: remove duplicate RPS patch
Commit 7af1fb9faa ("kernel: add a RPS balancer") introduces a RPS balancer
for all targets.

In the past however, this patch was already introduced for target "mediatek"
in commit 7762c07c88 ("mediatek: bump to v4.14")

Remove the separate copy of the patch within the mediatek target,
which otherwise is applied twice and results in a build error.

Fixes: 7af1fb9faa ("kernel: add a RPS balancer")

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-08-28 14:57:15 +02:00
Robert Marko
a9d7353192 ethtool: Update to 4.18
Tested on 8devices Jalapeno(ipq40xx)
Introduces following changes:
Feature: Add support for WAKE_FILTER (WoL using filters)
Feature: Add support for action value -2 (wake-up filter)
Fix: document WoL filters option also in help message
Feature: ixgbe dump strings for security registers

Signed-off-by: Robert Marko <robimarko@gmail.com>
2018-08-28 13:46:16 +02:00
John Crispin
fd20fdd0b8 ath79: fix remove irq code from pci driver patch
This patch got mangled in the void while rebasing it.

Signed-off-by: John Crispin <john@phrozen.org>
2018-08-28 11:58:50 +02:00
John Crispin
1d4d156a7c generic: add flow_offload accounting
This patch makes the flow offloading layer account for the traffic inside
the conntack entries.

Signed-off-by: John Crispin <john@phrozen.org>
2018-08-28 11:30:39 +02:00
John Crispin
7af1fb9faa kernel: add a RPS balancer
By default the RPS delegation will happen by masking the last few bits of
skb->hash. This patch adds an inermediate hash bucket that maps the masked
hash to a RPS core. This makes RPS results much more deterministic on SMP
systems.

Signed-off-by: John Crispin <john@phrozen.org>
2018-08-28 11:30:26 +02:00
David Bauer
8e9a59a6b9 build: add mkrasimage
The current make-ras.sh image generation script for the ZyXEL NBG6617
has portability issues with bash. Because of this, factory images are
currently not built correctly by the OpenWRT buildbots.

This commit replaces the make-ras.sh by C-written mkrasimage.

The new mkrasimage is also compatible with other ZyXEL devices using
the ras image-format.
This is not tested with the NBG6616 but it correctly builds the
header for ZyXEL factory image.

Signed-off-by: David Bauer <mail@david-bauer.net>
2018-08-28 11:26:53 +02:00