Commit graph

42094 commits

Author SHA1 Message Date
Felix Fietkau
e7397eef69 ppp: compile with LTO enabled
Reduces .ipk size on MIPS from 98.5k to 98k

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-13 17:22:53 +02:00
Felix Fietkau
dfbd49bd22 ppp: fix linker flags for the radius plugin
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-13 17:22:53 +02:00
Felix Fietkau
07940acc34 netifd: compile with LTO enabled
Reduces .ipk size from 65k to 63k on MIPS

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-13 17:22:53 +02:00
Felix Fietkau
8c11133c9d busybox: compile with LTO enabled
In the default configuration on MIPS, it reduces the .ipk size
from 214k to 207k

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-13 17:22:53 +02:00
Felix Fietkau
4e56af5ab4 mt76: update to the latest version
08719b1 mt76: use a per rx queue page fragment cache
4d2c565 mt76x2: reset HW before probe
f622975 mt76x2: fix CCK protection control frame rate
6780375 mt76x2: add frame protection support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-13 16:36:56 +02:00
Matthias Schiffer
16035a7dd3
include/feeds.mk: rework generation of opkg distfeeds.conf
Allow enabling/commenting/disabling each feed individually by using a
tristate config symbol.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-07-12 21:18:41 +02:00
Matthias Schiffer
6dac434c00
base-files: fix feed list in PKG_CONFIG_DEPENDS
FEEDS_ENABLED and FEEDS_DISABLED are derived from FEEDS_AVAILABLE, not
FEEDS_INSTALLED.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-07-12 21:18:41 +02:00
Matthias Schiffer
9af22f1ac9
include/feeds.mk: always add available feeds to PACKAGE_SUBDIRS
Setting CONFIG_FEED_... symbols combined two different effects: Disabling
a feed in the generated opkg distfeeds.conf, and omitting the feed from
PACKAGE_SUBDIRS.

It does not make sense to omit built feeds from PACKAGE_SUBDIRS, as it will
only lead to packages that can be enabled in .config (and that will
consequently be built) not to be found during rootfs creation, breaking
the build. All feeds that packages are emitted to should simply always be
added to PACKAGE_SUBDIRS instead; the CONFIG_FEED_... only configure the
generated distfeeds.conf like this.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-07-12 21:18:41 +02:00
Matthias Schiffer
6bdd5d8459
scripts/feeds: add src-dummy method
The src-dummy method does not actually obtain any feed, but it can be used
to insert addtional entries into the opkg distfeeds.conf. This is useful to
make package feeds available to users without requiring the corresponding
source feeds to be available during build.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-07-12 21:16:40 +02:00
Felix Fietkau
0c285bd081 ramips: ethernet: use own page_frag_cache
Using the NAPI or netdev frag cache along with other drivers can lead to
32 KiB pages being held for a long time, despite only being used for
very few page fragment.
This can happen if the ethernet driver grabs one or two fragments for rx
ring refill, while other drivers use (and free up) the remaining
fragments. The 32 KiB higher-order page can only be freed once all users
have freed their fragments, which only happens after the rings of all
drivers holding the fragments have wrapped around.

Depending on the traffic patterns, this can waste a lot of memory and
look a lot like a memory leak

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-12 18:43:53 +02:00
Felix Fietkau
01df4a2565 ramips: ethernet: use skb_free_frag to free fragments
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-12 18:43:53 +02:00
Peter Lundkvist
2eeb4b78c6 ramips: TP-Link TL-WR902AC v3: add missing wps button
Signed-off-by: Peter Lundkvist <peter.lundkvist@gmail.com>
2018-07-12 18:15:33 +02:00
Peter Lundkvist
33321ebefa ramips: TP-Link TL-WR902AC v3: don't build factory image
The line that produces factory image was accidentally left by me while
testing before inital commit.

I came to the conclusion that flashing from OEM firmware does not work
(seems to share this behavior with other tplinks based on mt7628).

I have not done any further analysis, as I was unable to open the
case and attach a serial port (too much glue). Maybe i will try once
more.

So the way to do initial flashing (or un-bricking) is to use the
tftp-recover image. It is possible to revert to OEM firmware with tftp
recovery; in this case the first 512 bytes the image file need to be
cut off.

Signed-off-by: Peter Lundkvist <peter.lundkvist@gmail.com>
[add explaination provided via mail as commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-07-12 18:15:33 +02:00
Mathias Kresin
a07e1126bc tools: kernel2minor: update to latest version
9fa9190 create reproducible images

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-07-12 18:15:33 +02:00
Alex Maclean
11d6547455 config: extend small_flash feature
Extend the small_flash feature to disable swap, core dumps, and
kernel debug info, and change the squashfs block size to 1024KiB.

Also change squashfs fragment cache to 2 for small_flash to ease memory
usage.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2018-07-12 18:15:33 +02:00
Mathias Kresin
cf7154db07 kernel: only optimized for size if small_flash
Add a new config option to allow to select the default compile
optimization level for the kernel.

Select the optimization for size by default if the small_flash feature is
set. Otherwise "Optimize for performance" is set.

Add the small_flash feature flag to all (sub)targets which had the
optimization for size in their default kernel config.

Remove CC_OPTIMIZE_FOR_* symbols from all kernel configs to apply the new
setting.

Exceptions to the above are:

  - lantiq, where the optimization for size is only required for the
    xway_legacy subtarget but was set for the whole target
  - mediatek, ramips/mt7620 & ramips/mt76x8 where boards should have
    plenty of space and an optimization for size doesn't make much sense
  - rb532, which has 128MByte flash

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-07-12 18:15:32 +02:00
Mathias Kresin
621fa91a82 ar71xx: move boards to tiny subtarget
Move boards to the tiny subtarget which break the build if the kernel is
set to "Optimize for performance".

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-07-12 18:15:19 +02:00
李国
671999157d verbose.mk: quote SUBMAKE options
build openwrt on centos 6 I should use devtoolset-3 to get gcc 4.9, but
it fail when make menuconfig. so I have to give option HOSTCC='gcc
-Wl,--copy-dt-needed-entries' to make. But it passed to sub make to
HOSTCC=gcc as micro SUBMAKE expand to HOSTCC=gcc
-Wl,--copy-dt-needed-entries. This patch fix this issue.

make -C build menuconfig HOSTCC='gcc -Wl,--copy-dt-needed-entries' V='1'
make: Entering directory `/work/openwrt/openwrt/build'
/opt/rh/devtoolset-3/root/usr/libexec/gcc/x86_64-redhat-linux/4.9.2/ld:
lxdialog/checklist.o: undefined reference to symbol 'acs_map'
//lib64/libtinfo.so.5: error adding symbols: DSO missing from command line
collect2: error: ld returned 1 exit status
make[1]: *** [mconf] Error 1
make -s -C scripts/config all CC=gcc -Wl,--copy-dt-needed-entries: build
failed. Please re-run make with -j1 V=s to see what's going on
make: *** [scripts/config/mconf] Error 1
make: Leaving directory `/work/openwrt/openwrt/build'

Signed-off-by: 李国 <uxgood.org@gmail.com>
2018-07-12 10:24:36 +02:00
Evgeniy Didin
12915b105a arc: Update variables substitutions in u-boot env files
In the latest version of u-boot (2018.05) there was a swith to
Hush shell for ARC AXS10x boards(arc770/archs38):
commit 9249d74781e1 ("ARC: AXS10x: Enable hush shell").
In Hush shell using "$()" to declare envitonment variables is forbidden,
instead of this "${}" need to be used.

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: John Crispin <john@phrozen.org>
2018-07-12 10:24:31 +02:00
Kristian Evensen
d238c7f995 mediatek: Fix memory node for U7623
The changed applied to BananaPi R2 in upstream commit c0b0d540db1a,
which was backported to 4.14 in 4.14.53, is also required for the U7623.
Without updating the memory node, the board refuses to boot.

Fixes: d0839e020d ("kernel: bump 4.14 to 4.14.53")

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
2018-07-12 08:53:02 +02:00
Lukáš Mrtvý
d3b8e6b2a7 kernel: gpio-nct5104d remove boardname check
'In different versions of coreboot are different names of apu boardname.
No need to check boardname to load module.'

Signed-off-by: Lukáš Mrtvý <lukas.mrtvy@gmail.com>
2018-07-12 08:51:27 +02:00
Hans Dedecker
af70d86d62 netifd: update to latest git HEAD
5cf7975 iprule: rework interface based rules to handle dynamic interfaces
57f87ad Introduce new interface event "create" (IFEV_CREATE)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-07-11 21:55:23 +02:00
Felix Fietkau
33553a11ab ramips: clean up and fix MT7621 NAND driver issues
- remove misaligned custom buffer allocation in the NAND driver
- remove broken bounce buffer implementation for 16-byte align

Let the MTD core take care of both

Fixes messages like these:
[  102.820541] Data buffer not 16 bytes aligned: 87daf08c

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-11 20:59:44 +02:00
Felix Fietkau
21ee8ce9b5 kernel: replace bridge port isolate hack with upstream patch backport on 4.14
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-11 20:59:05 +02:00
Felix Fietkau
68f9921ed8 netifd: update to the latest version
c1f6a82 system-linux: add autoneg and link-partner output
e9eff34 system-linux: extend link mode speed definitions
d1251e1 system-linux: adjust bridge isolate mode for upstream attribute naming
03785fb system-linux: fix build error on older kernels

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-11 20:59:05 +02:00
Felix Fietkau
41a1c1af4b kernel: adjust bridge port isolate patch to match upstream attribute naming
Newer kernels have a patch that implements compatible functionality
directly. Adjust the attribute of our own patch in preparation for
dropping it later

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-11 20:59:05 +02:00
Felix Fietkau
e07ad61aec procd: update to the latest version, fixes gcc 8 build error
a0372ac procd: increase watchdog fd_buf storage size to fix gcc8 build error

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-11 18:34:59 +02:00
Koen Vandeputte
8b42a260ed mac80211: Expose support for ath9k Dynack
Enables support for Dynack feature.

When a remote station is far away, we need to compensate for the distance
by allowing more time for an ACK to arrive back before issueing a retransmission.
Currently, it needs to be set fixed to indicate the maximum distance the remote
station will ever be.

While this mostly works for static antennae, it introduces 2 issues:
- If the actual distance is less, speed is reduced due to a lot of wates wait-time
- If the distance becomes greater, retries start to occur and comms can get lost.

Allowing to set it dynamically using dynack ensures the best possible tradeoff
between speed vs distance.

This feature is currently only supported in ath9k.
it is also disabled by default.

Enabling it can be done in 2 ways:
- issue cmd:  iw phy0 set distance auto
- sending the NL80211_ATTR_WIPHY_DYN_ACK flag to mac80211 driver using netlink

Disabling it can be done by providing a valid fixed value.

To give an idea of a practical example:

In my usecase, we have mesh wifi device installed on ships/platforms.
Currently, the coverage class is set at 12000m fixed.

When a vessel moved closer (ex. 1500m), the measured link capacity was a lot
lower compared to setting the coverage class fixed to 1500m

Dynack completely solved this, nearly providing double the bandwidth at closer range
compared to the fixed setting of 12000m being used.

Also when a vessel sailed to a distance greater than the fixed setting,
communication was lost as the ACK's never arrived within the max allowed timeframe.

Actual distance: 6010m
iperf 60s run avg

Fixed 12150m:  31 Mbit/s
Dynack:        58 Mbit/s

Fixed 6300m:   51 Mbit/s
Dynack:        59 Mbit/s

Fixed 3000m:   13 Mbit/s  (lots of retries)
Dynack:        58 Mbit/s

Actual distance: 1504m
iperf 60s run avg

Fixed 12150m:  31 Mbit/s
Dynack:        86 Mbit/s

Fixed 6300m:   55 Mbit/s
Dynack:        87 Mbit/s

Fixed 3000m:   67 Mbit/s
Dynack:        87 Mbit/s

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-07-11 16:23:51 +02:00
Koen Vandeputte
ba2b0f0ac6 kernel: bump 4.14 to 4.14.54
Rereshed all patches

Reworked patches to match upstream:
335-v4.16-netfilter-nf_tables-add-single-table-list-for-all-fa.patch

Compile-tested on: cns3xxx, imx6, x86_64
Runtime-tested on: cns3xxx, imx6, x86_64

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-07-11 16:02:24 +02:00
Moritz Warning
954faac7bc qos-scripts: fix indentation
Signed-off-by: Moritz Warning <moritzwarning@web.de>
2018-07-11 09:40:40 +02:00
Jason A. Donenfeld
4630159294 wireguard: bump to 0.0.20180708
* device: print daddr not saddr in missing peer error
* receive: style

Debug messages now make sense again.

* wg-quick: android: support excluding applications

Android now supports excluding certain apps (uids) from the tunnel.

* selftest: ratelimiter: improve chance of success via retry
* qemu: bump default kernel version
* qemu: decide debug kernel based on KERNEL_VERSION

Some improvements to our testing infrastructure.

* receive: use NAPI on the receive path

This is a big change that should both improve preemption latency (by not
disabling it unconditionally) and vastly improve rx performance on most
systems by using NAPI. The main purpose of this snapshot is to test out this
technique.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2018-07-11 09:04:03 +02:00
Hans Dedecker
7e82418372 iproute2: update to 4.17.0
Update to the latest version of iproute2; see https://lwn.net/Articles/756991/
for a full overview of the changes in 4.17.
Remove upstream patch 002-json_print-fix-hidden-64-bit-type-promotion.
Backport upstream patch 001-rdma-sync-some-IP-headers-with-glibc fixing
rdma compile issue.
At the same time re-organize patch numbering so the OpenWRT specific
patches start at 100.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-07-10 19:30:12 +02:00
Felix Fietkau
6dac92a42e hostapd: build with LTO enabled (using jobserver for parallel build)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-10 14:26:35 +02:00
Felix Fietkau
9b965d3b71 binutils: remove version 2.27
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-10 14:26:35 +02:00
Felix Fietkau
7c3e3eb098 binutils: update to version 2.30, resolves issues with LTO
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-10 14:26:35 +02:00
Felix Fietkau
55055aee50 binutils: backport an upstream fix for a linker bug that triggers with LTO
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-10 14:26:35 +02:00
Rafał Miłecki
7ddba08d87 kernel: bcm47xxpart: fix getting user-space data partition name
Partition name is picked by a parser_trx_data_part_name(). It has to
get correct partition offset (taking care of bad blocks) to work
properly.

This fixes UBI support for devices that have kernel flashed on partition
with a bad block.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-10 14:05:02 +02:00
Felix Fietkau
a5188eb258 nasm: disable LTO, remove host specific workarounds
The recent build failures on various platforms were apparently caused by
the fact that LTO build support in the configure script does not check
if it has a suitable version of gcc and simply assumes that gcc-ar is
available and can be used for intermediate files.

Since we really don't need to build nasm with LTO, simply disable it and
keep the whole build more portable

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-10 13:09:57 +02:00
Hans Dedecker
98a6bee09a odhcpd: update to latest git HEAD
345bba0 dhcpv4: improve error checking in handle_dhcpv4()
c0f6390 odhcpd: Check if open the ioctl socket failed

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-07-09 09:28:55 +02:00
Hauke Mehrtens
e204717ef2 toolchain/nasm: force ar and ranlib only on macOSX
On Debian 9 nasm does not build when we force it to use ranlib, for
macOSX this is needed. Only force this on macOSX and not on any other
OS, this should fix the build of nasm on Linux systems. On my Debian
system the nasm configure script selects  gcc-ranlib and gcc-ar instead.

Fixes: d3a7587eb9 ("toolchain/nasm: fix missing AR/RANLIB variables")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-07-08 14:22:54 +02:00
Kevin Darbyshire-Bryant
79b38047b9 build: README punctuation pendantry
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-07-08 12:05:16 +01:00
Kevin Darbyshire-Bryant
5781fc6b3f build: Update README & github help
Update README to include Openwrt branding and improve wording.

Point at the Openwrt wiki in .github templates.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-07-08 09:41:53 +01:00
Kevin Darbyshire-Bryant
edf338f248 basefiles: Reword sysupgrade message
sysupgrade 'upgrade' message more verbose than needs be.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-07-08 09:41:53 +01:00
David Bauer
6476148034 ath79: add support for OCEDO Raccoon
This commit adds support for the OCEDO Raccoon

SOC:	Atheros AR9344
RAM:    128MB
FLASH:  16MiB
WLAN1:  AR9344 2.4 GHz 802.11bgn 2x2
WLAN2:  AR9382 5 GHz 802.11an 2x2
INPUT:  RESET button
LED:    Power, LAN, WiFi 2.4, WiFi 5
Serial: Header Next to Black metal shield
        Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V)
        The Serial setting is 115200-8-N-1.

	NOTE: The U-Boot won't boot with the serial attached.
	Boot the device without serial attached and attach it
	after 3 seconds.

Tested and working:
 - Ethernet
 - 2.4 GHz WiFi
 - 5 GHz WiFi
 - TFTP boot from ramdisk image
 - Installation via ramdisk image
 - OpenWRT sysupgrade
 - Buttons
 - LEDs

Installation seems to be possible only through booting an OpenWRT
ramdisk image.

Hold down the reset button while powering on the device. It will load a
ramdisk image named 'raccoon-uImage-initramfs-lzma.bin' from 192.168.100.8.

Note: depending on the present software, the device might also try to
pull a file called 'raccoon-uimage-factory'. Only the name differs, it
is still used as a ramdisk image.

Wait for the ramdisk image to boot. OpenWRT can be written to the flash
via sysupgrade or mtd.

Due to the flip-flop bootloader which we not (yet) support, you need to
set the partition the bootloader is selecting. It is possible from the
initramfs image with

 > fw_setenv bootcmd run bootcmd_1

Afterwards you can reboot the device.

Signed-off-by: David Bauer <mail@david-bauer.net>
2018-07-08 00:04:27 +02:00
Hauke Mehrtens
da6c09eff4 kernel: move CONFIG_USB_MTU3 to generic config
CONFIG_USB_MTU3 is not visible for the mediatek target by default, but
only when CONFIG_USB_GADGET is set. This will config option will be
remove with when running "make kernel_oldconfig", move this option to
the generic config to prevent this.

This fixes the build of the mt7623 subtarget of the mediatek target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-07-07 23:53:04 +02:00
Hauke Mehrtens
29fa9ac559 kernel: disable some DRM_PANEL config options
The modules should not be build by default.
This fixes the build of the zynq target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-07-07 23:53:04 +02:00
Ted Hess
328ddcf628 toolchain/nasm: Backport GCC8 compatibility fix from upstream repo
Signed-off-by: Ted Hess <thess@kitschensync.net>
2018-07-07 16:15:02 -04:00
Lucian Cristian
2d268c0710 ath79: disable unused drivers for tiny target
Shrink the tiny kernel by moving all switch and ethernet phy drivers to
the generic kernel config instead of the target kernel config.

All boards in the tiny and nand target are either ar7240 or ar9331 based,
which don't support external xMII and therefore no external ethernet phy
can be connected. None of the boards uses a realtek switch either.

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2018-07-07 21:07:40 +02:00
Lucian Cristian
80e3a16fda ath79: optimize ath79 tiny target for size
the speed impact on tiny target is minimal and worth the size gained

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2018-07-07 21:07:40 +02:00
Christoph Krapp
e420b7b5c5 ath79: add support for UniFi AC-Mesh Pro
The Unifi AC-Mesh Pro has identical hardware to the Unifi AC-Pro except
USB support.
Furthermore for setting parameters like antenna gain it is helpful to
know the exact device variant.

Signed-off-by: Christoph Krapp <achterin@googlemail.com>
2018-07-07 21:07:40 +02:00