John Crispin
09c4b0e8f3
ar71xx/image: move TPLINK-LZMA image to new build code
...
There are 2 images missing: TLWR2543 TLWR1043V2 which have special properties
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45490
2015-04-18 10:19:23 +00:00
John Crispin
13204f6a35
ar71xx/image: add template tplink-16mlzma
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45489
2015-04-18 10:19:14 +00:00
John Crispin
1efdccc055
ar71xx/image: fix imagesize of template tplink-8mlzma
...
The new image size is verified by a running tplink device and checked
against mktplinkfw source code.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45488
2015-04-18 10:19:09 +00:00
Jonas Gorski
6232e845da
brcm63xx: fix bcm96318ref_p300 profile name
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45486
2015-04-18 09:34:17 +00:00
Felix Fietkau
c73adc80a3
bcm53xx: add profiling support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45480
2015-04-17 18:52:15 +00:00
Luka Perkov
22045c383d
imx6: put uboot-envtools in DEFAULT_PACKAGES
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45478
2015-04-17 13:47:13 +00:00
Luka Perkov
cc8628a6a3
kirkwood: put uboot-envtools in DEFAULT_PACKAGES
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45477
2015-04-17 13:47:09 +00:00
Rafał Miłecki
9c02b23a77
brcm47xx: add buttons support for WRT310N v2
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45474
2015-04-17 08:12:00 +00:00
Rafał Miłecki
9e03c36259
bcm53xx: fix handling absolute paths in sysupgrade (for vendor formats)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45473
2015-04-17 06:03:00 +00:00
Rafał Miłecki
b12e85a451
brcm47xx: fix handling absolute paths in sysupgrade (for vendor formats)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45472
2015-04-17 05:45:46 +00:00
Rafał Miłecki
e85294a957
brcm47xx: rework vendor fw handling to don't duplicate upgrade calls
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45470
2015-04-16 21:43:27 +00:00
Rafał Miłecki
c8eed9a50a
brcm47xx: explicitly select CPU_MIPS32_R2 and CPU_MIPSR2 for mips74k
...
The mips74k subtarget of brcm47xx configures gcc to compile for mips32r2;
however, the generated kernel config for 3.14 and later kernels ends up
with CPU_MIPS32_R1 and CPU_MIPSR1 selected. The generated kernel config
for the 3.10 kernel (Barrier Breaker) properly selected CPU_MIPS32_R2 and
CPU_MIPSR2. Modify the default kernel config for mips74k to explicitly
select CPU_MIPS32_R2 and CPU_MIPSR2.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45469
2015-04-16 21:20:37 +00:00
Felix Fietkau
582b20c4e2
kernel: accidentally committed a few patches in the wrong place, move them
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45468
2015-04-16 20:43:11 +00:00
Felix Fietkau
b860db2c63
bcm53xx: add power button for WXR-1900DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45467
2015-04-16 20:09:55 +00:00
Felix Fietkau
c9aeb21405
bcm53xx: add power button for Buffalo WZR-1750DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45466
2015-04-16 20:09:48 +00:00
Felix Fietkau
a7f768bdc8
bcm53xx: add USB LED for Buffalo WZR-1750DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45465
2015-04-16 20:09:42 +00:00
Felix Fietkau
f6cbbe1332
bcm53xx: make NAND flash timeouts non-interruptible to fix corruption issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45464
2015-04-16 20:09:36 +00:00
Felix Fietkau
d51420eedc
bcm53xx: increate trx maxlen to prevent build failures with bigger images
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45461
2015-04-16 20:09:15 +00:00
Felix Fietkau
f8d499fd3f
bcm53xx: fix WXR-1900DHP power led name and add usb led
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45460
2015-04-16 20:09:08 +00:00
Luka Perkov
76330e9b57
mvebu: better integrate xp-gp
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45459
2015-04-16 13:53:57 +00:00
Felix Fietkau
c64fdadea7
bcm53xx: make use of the new board detection layer
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45458
2015-04-16 12:18:34 +00:00
Imre Kaloz
2705cda813
mvebu: add support for the Linksys Caiman and Cobra
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45456
2015-04-16 09:54:39 +00:00
Luka Perkov
0926e4c22f
mvebu: bring back CONFIG_CPU_THERMAL
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45455
2015-04-16 00:23:34 +00:00
Luka Perkov
a635c0a04e
mvebu: refresh kernel config
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45454
2015-04-16 00:10:42 +00:00
Luka Perkov
dade4535bb
mvebu: fix typo in marvell profile
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45453
2015-04-15 16:23:20 +00:00
Luka Perkov
a046ce235f
mvebu: better integrate 385-ap-db
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45452
2015-04-15 16:23:10 +00:00
Felix Fietkau
147e005fcf
bcm53xx: add USB 2.0 power control for WXR-1900DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45451
2015-04-15 16:06:20 +00:00
Felix Fietkau
83e31eb7e7
bcm53xx: add USB 2.0 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45450
2015-04-15 16:06:14 +00:00
Rafał Miłecki
3edb55143d
bcm53xx: add (disabled) support for upgrading kernel during sysupgrade
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45445
2015-04-14 20:50:59 +00:00
Rafał Miłecki
3cb8bf44e6
otrx: change command line API to start with a mode
...
This will allow adding more modes without options conflict.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45443
2015-04-14 20:50:46 +00:00
John Crispin
911cf6da60
ar71xx: Enable AT803X_PHY to set special flags
...
Open-Mesh OM5P-AN use a AT8035 (F1E) behind one of the ethernet ports. This PHY
requires special flags to work correctly. Otherwise massive packet loss happens
with active POE or when switching the link speed from gigabit ethernet to fast
ethernet. The generic PHY doesn't have support to change these settings.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45439
2015-04-14 19:00:57 +00:00
John Crispin
efbdc168ff
ar71xx: fix ethernet packet loss issues on OM5P-AN
...
The OM5P-AN boards are suffering from ethernet packet loss when booting with
some active POE setups or when switching to Fast Ethernet when previously
booted with Gigabit ethernet attached.
The cause of the problem is that the AR8035 PHYs requires special register
settings to work reliably on these boards. Enable the RGMII TX, RX delays and
disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD and RDV
delay in the ETH_CFG register to fix the issue.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45438
2015-04-14 19:00:51 +00:00
Felix Fietkau
5c9c670616
kernel: update bgmac patches to the latest version submitted
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45431
2015-04-14 12:17:20 +00:00
Felix Fietkau
923bef1678
bcm53xx: refresh kernel patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45426
2015-04-13 22:23:37 +00:00
Felix Fietkau
d0ba3bb1e2
kernel: finally remove layer7 filter support
...
it has been non-functional for years and caused numerous memleaks and
crashes for people that tried to enable it.
it has no maintained upstream source, and it does not look like it's
going to be fixed any time soon
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45423
2015-04-13 22:23:14 +00:00
Felix Fietkau
87f854059a
kernel: fix more bgmac dma init/cleanup issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45422
2015-04-13 20:08:30 +00:00
Imre Kaloz
232c61742e
mvebu: copy the initramfs files to the bin dir
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45421
2015-04-13 20:06:47 +00:00
Felix Fietkau
1bf8e555bb
kernel: sync bgmac changes with latest upstream submission
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45420
2015-04-13 17:32:33 +00:00
Felix Fietkau
24e9f52106
bcm53xx: add support for the Buffalo WXR-1900DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45419
2015-04-13 17:32:25 +00:00
Felix Fietkau
1e48a48915
bcm53xx: fix GPIO pins > 16
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45418
2015-04-13 17:32:18 +00:00
Felix Fietkau
6bc743ef6f
kernel: add bgmac fixes for bcm53xx (fix ethernet bringup on a bcm4709 based device)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45417
2015-04-13 17:32:12 +00:00
Felix Fietkau
1f70f452cc
bcm53xx: add missing l2 cache controller AUXCTL bit
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45416
2015-04-13 17:32:05 +00:00
Imre Kaloz
8c684f42e5
mvebu: add support for the in-CPU RTC on the Armada 38x
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45415
2015-04-13 13:06:34 +00:00
Imre Kaloz
c9e6c7c836
mvebu: add comments to image generation
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45414
2015-04-13 12:15:40 +00:00
Imre Kaloz
e3bd4f0969
mvebu: stop legacy image generation
...
If you can't find the firmware for you board, send proper patches.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45413
2015-04-13 12:08:42 +00:00
Imre Kaloz
96c793f529
mvebu: generate a single firmware for the 385-db-ap
...
This has been done without having a board, but should work.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45412
2015-04-13 12:06:56 +00:00
Imre Kaloz
4da8f96754
mvebu: reflect Armada 38x support in the name
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45411
2015-04-13 11:30:39 +00:00
Felix Fietkau
d24388da44
bcm53xx: add a comment about the gpio base patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45408
2015-04-12 22:10:44 +00:00
Felix Fietkau
afafbc0d74
kernel: bgmac: add more DMA related fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45407
2015-04-12 22:10:40 +00:00
Imre Kaloz
09722d0bdc
ppc40x: upgrade to 3.18
...
left "broken" as I'm not sure if my only board is to blame.. testers welcomed
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45406
2015-04-12 20:48:13 +00:00