KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
14186 commits 3 branches 0 tags 154 MiB
Commit graph

5161 commits

Author SHA1 Message Date
Gabor Juhos
09aec474af ramips: add diag support 
SVN-Revision: 20799
 2010-04-11 17:47:23 +00:00
Gabor Juhos
2872bade69 ramips: enable image commandline hack and cmdline partition parsing 
SVN-Revision: 20798
 2010-04-11 17:47:20 +00:00
Gabor Juhos
af05b16c98 ramips: add default profiles 
SVN-Revision: 20797
 2010-04-11 17:47:17 +00:00
Lars-Peter Clausen
d1031cd861 time.c: Timer enable registers are only 8bit width. 
SVN-Revision: 20796
 2010-04-11 16:24:06 +00:00
Florian Fainelli
15e8d2e0b7 add net5501 support 
This patch brings up the net5501 platform.

Note that the x86/ target included support for all x86/ class
processors.  That's not technically correct.  This should be constrained
only to the "generic" subtarget.  Every x86-class target that isn't
generic should be able to select only the optimizations/capabilities
applicable to that architectural variant.

It's also assumed that all x86 processors have keyboard & mouse ports,
ISA, DMI, ACPI... the embedded ones typically don't.  Again, moving
that to the generic subtarget.

Fortunately, this was a fairly benign tweak.

The net5501 board includes the following logic:

Geode/LX processor
CS5535 super-I/O chip
PC87360 sensor chip
Via Rhine Ethernet controllers
Via Sata controllers
USB, LEDS, I2C

Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 20794
 2010-04-11 12:36:55 +00:00
Alexandros C. Couloumbis
62b96185c3 ixp4xx: add Titan Wireless TW-266-2 support (thanks juhosg & florian) 
SVN-Revision: 20793
 2010-04-11 09:03:10 +00:00
Alexandros C. Couloumbis
3c48fb6ff9 ixp4xx: add 2.6.33 support 
SVN-Revision: 20792
 2010-04-11 09:01:36 +00:00
Florian Fainelli
f4d71f5e81 create two endian-specific subtargets, as malta can run both 
SVN-Revision: 20790
 2010-04-10 21:02:51 +00:00
John Crispin
b4d0b6cbb3 adss 2.6.33 kernel patches, not defult yet as linux-atm breaks on 2.6.33 
SVN-Revision: 20789
 2010-04-10 20:11:28 +00:00
Florian Fainelli
6d12bc20ce remove 2.6.32 files, out of sync and going to be replaced differently 
SVN-Revision: 20787
 2010-04-10 18:44:44 +00:00
Lars-Peter Clausen
1d8823ae61 Add mx2 target with very basic support for the vp6500 voip phone 
SVN-Revision: 20786
 2010-04-10 18:37:34 +00:00
Felix Fietkau
1633dd6b6c ar71xx: add a profile for PB92 
SVN-Revision: 20778
 2010-04-10 16:50:20 +00:00
Jo-Philipp Wich
8f25fb6086 add script to fixup the wireless mac (#7102) 
SVN-Revision: 20775
 2010-04-10 14:29:01 +00:00
Gabor Juhos
3491026cbb Generic: Clean up output of AR8216 driver. 
This patch is rather a cosmetic patch. It fixes the following issues:

 * Demote the unknown device message to debug level to not spam
   the log.
 * Fix the version print of the unknown device message.
 * Output the 'attach' message only when attaching as switch driver,
   not when attaching as phy driver.
 * Correctly return NET_RX_DROP when dropping packets.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
Cc: bacfire@openwrt.org

SVN-Revision: 20773
 2010-04-10 11:34:11 +00:00
Florian Fainelli
222390bafc refresh patches 
SVN-Revision: 20767
 2010-04-09 19:26:57 +00:00
Florian Fainelli
b87e590b24 do not overwrite ENET_CTL_REG, fixes ethernet on bcm6338 
SVN-Revision: 20765
 2010-04-09 18:43:36 +00:00
Gabor Juhos
6139571932 ar71xx: nuke clocksource init patches, it is not required since 2.6.27 
SVN-Revision: 20764
 2010-04-09 13:33:03 +00:00
Alexandros C. Couloumbis
33bcbab6a4 x86: generic: fix soekris support (closes #7081) 
SVN-Revision: 20757
 2010-04-09 11:31:19 +00:00
Gabor Juhos
dd7304ec6d ar71xx: update phy masks for the Planex boards 
This avoids probing of the AR8216 chip on the eth0 interface.

Cc: backfire@openwrt.org

SVN-Revision: 20754
 2010-04-09 08:40:14 +00:00
Gabor Juhos
72d4353728 generic: make chip detection more reliable in the AR8216 driver 
Fixes broken ethernet on the Planex MZK-W04NU/W300NH boards.

Cc: bacfire@openwrt.org

SVN-Revision: 20753
 2010-04-09 08:40:12 +00:00
Gabor Juhos
d6c0363884 ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards 
Cc: backfire@openwrt.org

SVN-Revision: 20752
 2010-04-09 08:40:09 +00:00
Gabor Juhos
4c29a2c263 ar71xx: ag71xx: avoid unalinged accesses when using the phy specific receive functions 
Cc: backfire@openwrt.org

SVN-Revision: 20751
 2010-04-09 08:40:06 +00:00
Gabor Juhos
4a28844d80 ar71xx: ag71xx: call the phy driver's netif_receive_skb() 
Ag71xx needs to call the phy's netif_receive_skb() to allow phy drivers
to mangle rx packets. This patch fixes it.

This fixes the header mangling of the AR8216 driver.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
Cc:backfire@openwrt.org

SVN-Revision: 20750
 2010-04-09 08:38:46 +00:00
Florian Fainelli
722e75f066 fix kexec for mips, patch from Adrian Byszuk (#7115) 
SVN-Revision: 20745
 2010-04-08 07:53:14 +00:00
Jo-Philipp Wich
44810702d2 fix failsafe ip deconfig on AR23xx devices without ADM or Marvell switch 
SVN-Revision: 20733
 2010-04-06 22:46:15 +00:00
Felix Fietkau
df463abb18 ar71xx: fix ethernet on final pb92 board (previous value was based on a preliminary version) 
SVN-Revision: 20725
 2010-04-06 00:12:50 +00:00
Jo-Philipp Wich
23bebe33a7 Add support for the ar8316 switch. This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices. 
[PATCH 2/2] ar71xx: Add the ar8316 driver to rs pro/rb-450g.
Add the ar8216 driver to the ar71xx target, and add network
configurations for the RouterStation Pro and the RouterBoard RB-450G.

SVN-Revision: 20722
 2010-04-05 23:03:16 +00:00
Jo-Philipp Wich
22e3bd0d8b add kernel support for iptables comment match 
SVN-Revision: 20720
 2010-04-05 22:38:40 +00:00
Nicolas Thill
83bf10cb3f target/rdc: revert [20653], the proper fix for #7005 is in [20712] 
SVN-Revision: 20714
 2010-04-05 02:38:59 +00:00
Felix Fietkau
ddb677e13d ixp4xx: add back the patch for avoiding dma bounce buffers for network buffers, which was lost on the kernel upgrade to 2.6.32. fixes ath9k and improves other drivers' performance on boards with >64M ram 
SVN-Revision: 20708
 2010-04-04 17:43:13 +00:00
Nicolas Thill
1fc7da0306 sysupgrade: fix typo in platform_do_upgrade() on x86 (closes: #7068), thanks to acinonyx 
SVN-Revision: 20703
 2010-04-04 15:47:26 +00:00
Lars-Peter Clausen
f8275576d9 jzcodec: Only support 16bit formats for now 
SVN-Revision: 20701
 2010-04-04 15:39:15 +00:00
Mirko Vogt
e60b9b9b35 do not disable netfilter support for xburst target (some packages require netfilter support) 
SVN-Revision: 20698
 2010-04-04 13:01:50 +00:00
Gabor Juhos
c874513cfa ar71xx: fix broken LAN ports on the boards with AR8216 switch (closes #7024) 
* cc: backfire@openwrt.org

SVN-Revision: 20673
 2010-04-03 13:59:08 +00:00
Florian Fainelli
e3a9d80e8f do not set CONFIG_NET_DEV_OPS (#7005) 
SVN-Revision: 20653
 2010-04-02 10:34:40 +00:00
Florian Fainelli
2a4fb82289 flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. 
SVN-Revision: 20652
 2010-04-01 21:20:43 +00:00
Hauke Mehrtens
bbe4a57177 brcm-2.4: fix commit r18413 "128MB ram problem" 
This was missing in commit r20072

SVN-Revision: 20651
 2010-04-01 17:27:59 +00:00
Imre Kaloz
d3b9b93dd3 add a subtarget and drivers for the Intel Tolapai SoC 
SVN-Revision: 20648
 2010-04-01 12:05:27 +00:00
John Crispin
bfc37a1a19 improve extract code 
SVN-Revision: 20641
 2010-03-31 21:12:02 +00:00
Gabor Juhos
0abc7e6d53 ramips: add wpad-mini to the default packages 
SVN-Revision: 20632
 2010-03-31 09:58:33 +00:00
Gabor Juhos
a423c3abee ramips: annotate device register function prototypes with __init 
SVN-Revision: 20627
 2010-03-31 08:40:28 +00:00
Gabor Juhos
a9f313edea ramips: register wifi device for the RT2880 based boards 
SVN-Revision: 20625
 2010-03-31 08:40:23 +00:00
Gabor Juhos
9f3d673dbc ramips: add wifi device for the RT2880 as well 
SVN-Revision: 20624
 2010-03-31 08:40:20 +00:00
Gabor Juhos
1c25cfcde0 ramips: register wifi device on the rt305x based boards 
SVN-Revision: 20616
 2010-03-30 21:24:10 +00:00
Gabor Juhos
ce2ac05602 ramips: sync kernel config 
SVN-Revision: 20614
 2010-03-30 21:24:05 +00:00
John Crispin
60ca90e08b prepare kernel for voip 
SVN-Revision: 20613
 2010-03-30 21:06:27 +00:00
John Crispin
6f4052abe0 The ralink rt305x board has a wireless card that can be used with the rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> 
SVN-Revision: 20599
 2010-03-30 12:04:05 +00:00
Nicolas Thill
ceaff7a566 imagebuilder: don't disable on uml 
SVN-Revision: 20598
 2010-03-30 11:42:41 +00:00
Nicolas Thill
8c2b753329 imagebuilder: various fixes * only copy host tools from $(STAGING_DIR_HOST)/bin * remove more target patches, and also target files * combine the 3 find commands into a single one 
SVN-Revision: 20597
 2010-03-30 11:41:51 +00:00
John Crispin
3ad14f304e Fix the base address of the wireless card. Otherwise it is not possible to register a platform wireless device as it overlaps with something else. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> 
SVN-Revision: 20596
 2010-03-30 10:06:05 +00:00