Commit graph

3362 commits

Author SHA1 Message Date
Felix Fietkau
0191a06985 mt76: update to the latest version
4734108 mt7603: use mt7603_wtbl_clear on station removal
9428e34 mt7603: fix watchdog reset sequence
b3f82a3 mt7603: report PSE reset failures via debugfs
a301dec mt7603: add back PSE client reset code
94cebfc mt7603: fix handling lost interrupt events during watchdog reset
b38fe7d mt7603: only issue PSE reset on PSE stuck
da666a7 mt7603: issue PSE reset if firmware debug register indicates stuck queues

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-21 15:15:05 +01:00
Felix Fietkau
8184bdddc4 mt76: update to the latest version
471d397 mt7603: fix priority for buffered multicast packets
3873e82 mt7603: fix MT_BMAP_0/MT_GROUP_THD_0 register initializion for mt7628
749d5c3 mt7603: fix reserved page handling for mt7628
d22799b mt7603: reduce reserved pages for beacons
42c5281 mt7603: fix maximum frame size in scheduler init
fa7335b mt76: fix potential NULL pointer dereference in mt76_stop_tx_queues
84aa12a mt76: fix potential null pointer deref in mt76_sta_add
7c4c33c mt7603: skip efuse tx power data for mt7628
ca2c875 mt7603: add support for accessing remapped registers via ops
b44d793 mt7603: clear PSE redirections before MCU init
82363ab mt7603: move tx status to rx queue 0
c09e8a4 mt7603: fix buffering of tx packets for powersave clients

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-20 16:56:11 +01:00
Felix Fietkau
251c350727 mt76: update to the latest version
96b3b3d mt76x2u: main: fix typo setting sta_state mac80211 callback

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-16 13:43:33 +01:00
Felix Fietkau
86fc443f8b mt76: update to the latest version
009ab91 mt76: clean up more unused EXPORT_SYMBOLs
963768d mt76x02: fix regression in tx station race condition fix
d7788cc mt76: mt76x02: make group_wcid the first member in struct mt76x02_vif
e65ad4c mt7603: make group_wcid the first member in struct mt7603_vif
7b1373e mt76: mt76x02: remove mt76x02_txq_init
a97127b mt76: replace sta_add/remove ops with common sta_state function
13f1e82 mt7603: clear wtbl entry for removed stations
90e2c1b mt7603: add mt7603_wtbl_set_skip_tx, change mt7603_wtbl_set_ps users
41931e4 mt7603: toggle skip_tx on station add/remove
d0fdf01 mt7603: avoid unnecessary wtbl writes for ps-filter

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-16 12:44:01 +01:00
Felix Fietkau
d965f41ac8 mt76: update to the latest version
6745830 mt76: fix race condition in station removal
7e5c819 mt76: add mt76_sta_remove helper
75aa36e mt7603: use wcid/wcid_mask from struct mt76_dev
fd85ff9 mt7603: use mt76_sta_remove helper
0848d2d mt7603: simplify mt7603_mcu_msg_send, remove skb_ret handling
83a80ca mt76: request tx status for powersave released EOSP packet
df5c797 mt76: fix uninitialized mutex access setting rts threshold
0bfa98e mt76: introduce mt76x02_config_mac_addr_list routine
4248446 mt76x0: pci: enable VHT rates in IBSS mode
f75efd8 mt76x2u: phy: add TX_SHAPING calibration
c1d67b4 mt76x2u: phy: run phy_channel_calibrate after channel switch
9fe0fe8 mt76x2u: main: use mt76x02_bss_info_changed utility routine
3fc95d7 mt76x2u: init: remove mt76x2u_init_beacon_offsets routine
88f6883 mt76: remove wait argument from mt76x02_mcu_calibrate

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-13 21:22:28 +01:00
Felix Fietkau
3879fc2b1a mac80211: fix spurious disconnections with powersave clients
Affects all drivers using ieee80211_tx_status_noskb, e.g. ath9k and mt76

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-13 20:35:29 +01:00
Stijn Tintel
43e1b38e4a kernel: drop old bluetooth config symbols
They do not exist in any of the supported kernel versions.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-11-12 19:11:54 +02:00
Felix Fietkau
7dd42aa592 mt76: update to the latest version
ffccb48 mt76: do not wake tx queues during flush

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-09 15:26:44 +01:00
Felix Fietkau
68b43270f9 mt76: update to the latest version, fix a typo
29d9532 mt7603: fix faulty variable initialization in last commit

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-08 09:17:35 +01:00
Felix Fietkau
df1191bcea mt76: update to the latest version
417cf49 mt7603: improve recovery from MCU hang

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-07 20:36:50 +01:00
Rafał Miłecki
4d5b0efc09 mac80211: brcmfmac: backport the last accepted 4.21 changes
It's a typo fix & patch that helps debugging possible WARN-ings.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-07 11:17:00 +01:00
Rafał Miłecki
3eab6b8275 mac80211: brcmfmac: backport NVRAM loading improvements
This adds support for storing board specific NVRAM files as firmware.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-07 11:11:08 +01:00
Rafał Miłecki
5932eb690f mac80211: brcmfmac: backport firmware loading cleanup
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-07 09:43:32 +01:00
Rafał Miłecki
b50f162b3c mac80211: brcmfmac: backport the latest 4.20 changes
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-07 09:14:55 +01:00
Rafał Miłecki
f7a3459ab9 mac80211: brcmfmac: rename 4.20 backport patches
Include kernel version to help tracking changes.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-07 08:54:16 +01:00
Felix Fietkau
4fd9a5667e mt76: update to the latest version
172f081 mt76x0: do not overwrite other MT_BBP(AGC, 8) fields
2ae2046 mt76x0: phy: use mt76_poll_msec in mt76x0_phy_temp_sensor
add66a0 mt76x0: init: use mt76x02_mac_shared_key_setup in mt76x0_init_hardware
1f24db9 mt76x2: move wcid_tx_rate conf at bootstrap
097b2bd mt76x0: init: use mt76x02_mac_wcid_setup for wcid configuration
d0eb03e mt76x2u: init: remove not useful configuration
c7aa8f4 mt76x2u: init: use common routines for wcid/key initialization
bd568d9 mt76: move mt76x02_eeprom_copy in mt76x02-lib module
57b441d mt76x0: phy: introduce tssi calibration support
a78802c mt76x0: phy: use tssi reported value to configure tx power if available
94ad030 mt76: remove mcu_msg_alloc
15cb426 mt76: remove wait argument from mt76x02_mcu_function_select
cd76a83 mt76: remove wait argument from mt76x02_mcu_set_radio_state
9b97e0f mt76x02: run calibration after scanning
663b197 mt76x02: assure we update gain after scan
eb53745 mt76x0: dfs: fix IBI_R11 configuration on non-radar channels
ef06c30 mt76: avoid queue/status spinlocks while passing tx status to mac80211
5195257 mt7603: fix maximum rx frame size
01815e9 mt7603: use mutex from struct mt76_dev
3c8e8a7 mt7603: use irq_lock/irqmask from struct mt76_dev
8b7f50d mt76: add size check for additional rx fragments
87bad3a mt7603: stop MAC on watchdog reset
c34baab mt7603: add missing unlock in case changing the channel fails
ac6fc78 mt7603: add debugfs file to trigger watchdog resets
d9b5324 mt7603: add SPDX license identifiers
498d716 mt7603: fix checkpatch issues
a1afefd mt7603: fix handling of fixed rate packets
5ee0523 mt7603: fix tx status rate reporting for fixed-rate packets

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-06 22:25:49 +01:00
Koen Vandeputte
5ac34818f9 ath9k: fix dynack in IBSS mode
Currently, dynack was only tested upstream using AP/STA mode.
Testing it on IBSS, showed that late-ack detection was broken.

This is caused due to dynack using Association Request/Response
frames for late-ack detection, which IBSS does not use.
Also allowing Authentication frames here solves this.

A second issue also got fixed, which was also seen AP/STA mode:

When a station was added, the estimated value would be exponentially averaged
using 0 as a starting point.

This means that on larger distances, the ack timeout was still not high
enough before synchronizing would run out of late-ack's for estimation.

Fix this by using the initial estimated value as a baseline
and only start averaging in the following estimation rounds.

Test setup:
- 2x identical devices:  RB912UAG-5HPnD + 19dB sector
- IBSS
- 2x2 802.11an (ar9340), HT20, long GI
- RSSI's  -70 / -71
- Real distance: 23910 meter

Results (60s iperf runs):

Fixed coverage class 54 (up to 24300m):
* 21.5 Mbits/sec

Dynack:
* 28.9 Mbits/sec

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-06 11:49:27 +01:00
Rosen Penev
8fc187a76e kernel: Remove dependencies on old kernels
Kernels 4.1 and 4.4 are not part of the tree anymore.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-11-01 17:16:52 +01:00
Kabuli Chana
390158bd2b mwlwifi: update to version 10.3.8.0-20181029
compile / test target mvebu / mamba

Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
2018-11-01 13:48:49 +01:00
Thomas Fuzeau
87e1894d59 kernel: add kmod-usb-serial-mos7840
Enable build of kernel module for mos7840 usb-serial devices.

Signed-off-by: Thomas Fuzeau <tfuzeau@loocla.com>
2018-11-01 13:44:48 +01:00
Felix Fietkau
8edce6014a mt76: update to the latest version
fdc63f1 mt76: fix regression in tx status handling

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-27 17:54:37 +02:00
Daniel Engberg
4056be58f3 mt76: Fix dependencies for PCI support
USB support doesn't necessarily mean that there's
PCI support available so move that to the drivers
which requires PCI support. This applies to the
sunxi platform for instance.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [fix mt76x0e]
2018-10-26 17:23:38 +02:00
Felix Fietkau
6026356578 mt76: update to the latest version
0b8b15f mt7603: use common mmio mcu struct
d612e2e mt76: mt76x02: skip station tx status for non-sta wcid entries
d89d84b mt76: mt76x02: only override control->sta on sw-encrypted tx
9d59d2a mt76: add support for reporting tx status with skb
ed17ba2 mt7603: use common tx status handling code
14b6c59 mt76x0: use band parameter for LC calibration

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-25 22:49:08 +02:00
Jonathan Lancett
9ac7350240 mwlwifi: driver version to 10.3.8.0-20181022
Upgrade 88W8997 firmware to 8.4.0.52.
Removed unnecessary firmware settings.
Added vendor events.
Fixed crash problem when module is removed.
Modified the code to protect tx queues.

Signed-off-by: Jonathan Lancett <j.lancett@ntlworld.com>
[tidy commit message]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-10-24 17:55:14 +01:00
Felix Fietkau
2f9179419c mt76: update to the latest version
d033272 mt76: mt76x0: handle chip specific initval differences
1a2b2dc mt76: usb: fix static tracepoints
11151f4 mt76x0: antenna select corrections
dade109 mt76x0: init: simplify mt76x0_init_mac_registers
3c54612 mt76x0: pci: add missing MODULE_FIRMWARE macro
97e0269 mt76x0: mac: remove mt76x0_mac_set_ampdu_factor
5d8c4bf mt76x0: align mt76x0u and mt76x0e fw version
d4391ae mt76: move mt76x02_mac_set_short_preamble in mt76x02_mac.c
aa6ebf9 mt76: move mt76x02_init_device in mt76x02-lib module
a4a08c3 mt76: move mac beacon routines in mt76x02-lib module
6b69650 mt76: move tx beacon routines in mt76x02-lib module
8486047 mt76x0: pci: add pre_tbtt_tasklet support
acd4c99 mt76: move mt76x02_sw_scan and mt76x02_sw_scan_complete in mt76x02-lib module
2d736cf mt76: move mt76x02_get_txpower in mt76x02_util.c
aa1d6bd mt76: move mt76x02_sta_ps in mt76x02-lib module
e684281 mt76: introduce mt76x02_init_beacon_config routine
c181d97 mt76x0: pci: enable AP support
3b86d99 mt76: move mt76x02_set_tx_ackto in mt76x02-lib module
41d7ef7 mt76x0: update init vals for MT_TX_PROT registers
fe5a149 mt76: move tx protection routines in mt76x02-lib module
5bca2de mt76: move mt76x02_bss_info_changed in mt76x02-lib module
d21a835 mt76: move dfs support in mt76x02-lib module
ba9d424 mt76x0: pci: add DFS support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-23 11:18:06 +02:00
Hauke Mehrtens
9fcfcd49f8 mac80211: hermes-pcmcia: add missing dependency to kmod-pcmcia-core
This fixes a build problem on x86.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-21 16:46:16 +02:00
Yufei Miao
260be8a579 mwlwifi: driver version to 10.3.8.0-20181008
Signed-off-by: Yufei Miao <myf@myf.cloud>
2018-10-20 16:24:29 +02:00
Roman Bazalevskiy
47e7a3904d kernel/modules: Aosong AM2315/AM2320 IIO kernel module support enabled.
Signed-off-by: Roman Bazalevskiy <rvb@rvb.name>
2018-10-20 16:24:29 +02:00
Deng Qingfang
858a8acf3e kernel/modules: add kmod-fou6 package
IPv6 support for Foo-over-UDP tunnel

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2018-10-20 16:24:23 +02:00
Linus Walleij
10ec966f7b gemini: Break out USB to packages
This creates a new kernel package for the fotg210 host
controller and uses that with the gemini to shrink the
kernel. The SQ201 needs the USB2 PCI package as well.

The build system required me to make kernel_oldconfig
beofore it would build without errors so some minor
unrelated Kconfig entries are changed.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-20 16:13:39 +02:00
Felix Fietkau
a91d82303c mt76: update to the latest version
b51337a mt76: clean up unused leftover EXPORT_SYMBOLs
383b228 mt76x0: reduce duplication in setting rf bandwidth parameters
a1a4528 mt76: mt76x0: handle chip specific initval differences
f473340 mt76: usb: fix static tracepoints
3a975b4 mt76x0: antenna select corrections
37c1150 mt76x0: init: simplify mt76x0_init_mac_registers

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-18 16:29:25 +02:00
Felix Fietkau
202ac58ca2 mt76: update to the latest version, add mt76x0 firmware, enable mt76x0e
96fa353 mt76: do not store aggregation sequence number for null-data frames
c50dca8 mt76x0: print BBP version only for debug
ddc9e05 mt76x0: correct RF access via RF_CSR register.
02d2385 mt76: allow to identify bus
c438e67 mt76x0: correct RF reg pairs write for PCIe
c83abb8 mt76x0: use bus helper to identify rf access method
9c272ff mt76x0: phy: fix bank check in mt76x0_rf_csr_{wr,rr}
1945d57 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mcu.c
214eab7 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_phy.c
29bc2ae mt76: use mt76x02_dev instead of mt76_dev in mt76x02_util.c
08ecb5f mt76: use mt76x02_dev instead of mt76_dev in mt76x02_usb_mcu.c
fd9b2b0 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mac.c
f37bd25 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_txrx.c
48950cb mt76: use mt76x02_dev instead of mt76_dev in mt76x02_eeprom.c
06276cc mt76x0: pci: report firmware version using ethtool
72546ed mt76x0: pci: add missing mac80211 callbacks
4de98cd mt76: disable ldpc coding for mt76x0 devices
f0951c2 mt76x0: pci: add mt76x0_register_device in mt76x0e_register_device
4f3685e mt76: reserve enough room for USB tx skbs
5e6907f mt76x0: remove dma.h
acfc5a9 mt76x0: pci: fix set external PA I/O current
2b79bb7 mt76: mt76x0e: another fix for the external PA current setting
8a0acfd mt76x0: phy: fix restore phase in mt76x0_phy_recalibrate_after_assoc
e9e949b mt76x0: phy: remove channel parameter from mt76x0_phy_set_chan_bbp_params
1775717 mt76: move mt76x02_phy_set_bw in mt76x02-lib module
f82134f mt76: move mt76x02_phy_set_band in mt76x02-lib module
3eaa34f mt76x0: pci: rename mt76x0_phy_calibrate
7269fb4 mt76x0: pci: introduce mt76x0_phy_calirate routine
a514b75 mt76x0: phy: update set_channel for mt76x0e devices
62a1bc5 mt76x0: eeprom: introduce mt76x0_tssi_enabled routine
a48481d mt76x0: phy: add phy/vco temperature compensation
cc34ce9 mt76: move rssi_gain_thresh routines in mt76x02-lib module
eaf9751 mt76: move mt76x02_phy_adjust_vga_gain in mt76/mt76x02_phy.c
2715e7c mt76: introduce mt76x02_init_agc_gain routine
87fcb31 mt76x0: phy: align channel gain logic to mt76x2 one
98f8ef7 mt76x0: phy: do not run calibration during channel switch
cf859ad mt76x2: align mt76x2 and mt76x2u firmware
1f3f767 mt76x2u: align channel gain logic to mt76x2 one
d1c1454 treewide: Replace more open-coded allocation size multiplications
bcbecd2 mt76x0: phy: use proper name convention
b6694e6 mt76x0: phy: simplify rf configuration routines
da129c9 mt76x0: phy: improve code readability in initvals_phy.h
eab7ab1 mt76x0: pci: add get_survey support
9e493f7 mt76: move mt76x02_mac_work routine in mt76x02-lib module
ecec6ba mt76: move mt76x02_debugfs in mt76x02-lib module
4f3b608 mt76x0: use shared debugfs implementation
6aae25b mt76x0: use mt76x02_mac_work as stats handler
b228a45 mt76x2u: introduce mac workqueue support
4671af4 mt76x0: phy: unify calibration between mt76x0u and mt76x0e
5ed28f3 mt76x0: do not perform MCU calibration for MT7630
9b844da add mt7610e firmware

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-16 13:01:11 +02:00
Felix Fietkau
055fb0ba83 mt76: move mt76x2e firmware to kmod-mt76x2-common and use it for mt76x2u
USB and PCIe devices can run the same firmware

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-14 18:47:44 +02:00
Felix Fietkau
e220ffb533 mac80211: fix A-MSDU packet handling with TCP retransmission
Improves local TCP throughput and fixes use-after-free bugs that could lead
to crashes.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-11 18:42:54 +02:00
Robert Marko
b1ab8fac5a ath10k-ct: Update to 29-09-2018
Update ath10k-ct to be able to drop 210-ath10k-fix-recent-bandwidth-conversion-bug.patch
as its upstream.

b9989fbd5d6e ath10k-ct: Add upstream patch to fix peer rate reporting.
ac9224344dbf ath10k-ct: Support sending custom frames with no-ack flag.
bc938bc2021e ath10k-ct: Support sending pkts with specific rate on 10.4 firmware.

Runtime tested on:
- GL-iNet GL-B1300
- Mikrotik RB912 + QCA9882

Signed-off-by: Robert Marko <robimarko@gmail.com>
[Added list of all changes from previous version + add own test device]
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-10-11 12:52:27 +02:00
Koen Vandeputte
f4b7dfcc4b netfilter: add missing dependency for kernel 4.14
Since kernel 4.14.75 commit ("netfilter: xt_cluster: add dependency on conntrack module")
a dependency is required on kmod-nf-conntrack.

It seems this was already present for kmod-ipt-clusterip
but not yet for kmod-ipt-cluster

Add it fixing a build error when including kmod-ipt-cluster:

Package kmod-ipt-cluster is missing dependencies for the following libraries:
nf_conntrack.ko
modules/netfilter.mk:665: recipe for target '/mnt/ramdisk/koen/firmware/builds/openwrt/bin/targets/cns3xxx/generic/packages/kmod-ipt-cluster_4.14.75-1_arm_mpcore_vfp.ipk' failed
make[3]: *** [/mnt/ramdisk/koen/firmware/builds/openwrt/bin/targets/cns3xxx/generic/packages/kmod-ipt-cluster_4.14.75-1_arm_mpcore_vfp.ipk] Error 1
make[3]: Leaving directory '/mnt/ramdisk/koen/firmware/builds/openwrt/package/kernel/linux'
Command exited with non-zero status 2
time: package/kernel/linux/compile#1.80#0.05#2.07
package/Makefile:107: recipe for target 'package/kernel/linux/compile' failed
make[2]: *** [package/kernel/linux/compile] Error 2
make[2]: Leaving directory '/mnt/ramdisk/koen/firmware/builds/openwrt'
package/Makefile:103: recipe for target '/mnt/ramdisk/koen/firmware/builds/openwrt/staging_dir/target-arm_mpcore+vfp_musl_eabi/stamp/.package_compile' failed
make[1]: *** [/mnt/ramdisk/koen/firmware/builds/openwrt/staging_dir/target-arm_mpcore+vfp_musl_eabi/stamp/.package_compile] Error 2
make[1]: Leaving directory '/mnt/ramdisk/koen/firmware/builds/openwrt'
/mnt/ramdisk/koen/firmware/builds/openwrt/include/toplevel.mk:216: recipe for target 'world' failed
make: *** [world] Error 2

Fixes: f983956a8b ("kernel: bump 4.14 to 4.14.75")
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v4.14.75&id=b969656b46626a674232c0eadf92a394b89df07c
2018-10-10 17:33:04 +02:00
Felix Fietkau
567fe53230 mt76: fix typo in kmod-mt76x0u package description
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-09 14:16:03 +02:00
Daniel Engberg
6e6e7adc8c mac80211: Use @KERNEL alias instead of hardlink
Use @KERNEL alias provided by toolchain instead of relying on a specific site.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-10-07 02:10:15 +02:00
Felix Fietkau
ffe824e912 mt76: fix dependencies
- make kmod-mt76-core hidden
- select kmod-mt76-core and kmod-usb-core from mt76-usb

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-06 14:26:32 +02:00
Felix Fietkau
d51cbefe86 mt76: update to the latest version
053de5c mt76x0: pci: add mt76x0e_cleanup routine
c6b1926 mt76x2: move mt76x2 source files to mt76x2 folder
6afb1b8 mt76: fix header guard macro define names
05c7f24 mt76: fix frag length allocation for usb
6856ef6 mt76: usb: fix hw initialization sequence
3d43146 mt76x0: usb: stop cal/mac workqueues at hw stop
bef08cc mt76: move mt76x02_tx_get_max_txpwr_adj in mt76x02_util.c
cd42111 mt76: add get_tx_txpwr_adj function pointer to mt76_driver_ops
c49a3ae mt76: move mt76x02_mac_write_txwi in mt76x02-lib module
4bae980 mt76: usb: use mt76x02u_tx_prepare_skb to fill txwi
e0847b4 mt76x0: init: remove unnecessary configurations
e802b5c mt76: move mt76x02_phy_get_min_avg_rssi in mt76x02_phy.c
2742847 mt76: move mt76x02_rx_get_sta and mt76x02_rx_get_sta_wcid in mt76x02_util.h
c26f9fd mt76x0: mac: use sta ewma estimation for rssi tracking
330fbe3 mt76x0: remove unused variable in mt76x0_dev
a56efc5 mt76x0: remove hw_atomic_mutex mutex in mt76x0_dev
abd1daa mt76x2: move mt76x2_dev in mt76x02_util.h
d5d1e59 mt76x0: merge mt76x0_dev in mt76x02_dev
e236ba5 mt76: move mt76x02_mac_process_rx in mt76x02-lib module
724d547 mt76: unify rxwi parsing between mt76x2 and mt76x0 drivers
ec3d829 mt76: move mt76x02_tx in mt76x02-lib module
159f767 mt76: move txrx shared routines in mt76x02_txrx.c
9c874cd mt76: rename mt76x02_util.h in mt76x02.h
fd9174f mt76x2: remove leftover function declatarions
608708a mt76: move tpc routines in mt76x02-lib module
45b8f5e mt76: move mt76x02_tx_prepare_skb in mt76x02_txrx.c
9a39521 mt76: usb: move mt76x02u_tx_complete_skb in mt76x02_usb_core.c
3770c54 mt76: move mt76x02_mac_poll_tx_status in mt76x02-lib moudle
9730290 mt76: move mt76x02_tx_complete in mt76x02-lib module
99e0486 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mmio.c
3d2cfe3 mt76: move tx_tasklet management in mt76x02-lib moudle
e61671e mt76: move irq handler in mt76x02-lib moudle
d533f13 mt76x0: pci: report firmware version using ethtool

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-06 13:02:29 +02:00
Felix Fietkau
502bcd93fe mac80211: move marvell packaging code to marvell.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-06 13:02:29 +02:00
Felix Fietkau
2804a7f13e mac80211: move intel packaging code to intel.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-06 13:02:29 +02:00
Felix Fietkau
1f14ac9a0c mac80211: move realtek packaging code to realtek.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-06 13:02:29 +02:00
Felix Fietkau
7f984dab1c mac80211: move broadcom packaging code to broadcom.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-06 13:02:29 +02:00
Felix Fietkau
bde8ddf1ad mac80211: move atheros/qca packaging code to ath.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-06 13:02:29 +02:00
Felix Fietkau
ece90fc9df mac80211: move rt2x00 packaging code to ralink.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-06 13:02:29 +02:00
Felix Fietkau
fe6606c7ba mac80211: remove duplicated lines for building packages, use PKG_DRIVERS instead
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-06 13:02:29 +02:00
Kevin Darbyshire-Bryant
885052fbfb kmod-sched-cake: bump to 20181002
Revert "Add workaround for wrong skb->mac_len values after splitting GSO"

Remove our local patch which did the same thing.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-10-02 19:59:05 +01:00
Kevin Darbyshire-Bryant
b47614f9f1 kmod-sched-cake: don't gso fixup on fixed kernels
Kernels 4.14.73 & 4.9.140 include the gso fixup fix, so cake
doesn't need to do it.  Let's not waste cpu cycles by doing it in
cake which could be really important on cpu constrained devices.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-10-02 12:04:11 +01:00
Felix Fietkau
031c31ccdb mt76: update to the latest version, fixes mt76x2 beacon issue
94d4445 mt76: mt76x2: fix multi-interface beacon configuration

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01 13:36:17 +02:00