ar71xx: nuke 2.6.28 support

SVN-Revision: 18750
This commit is contained in:
Gabor Juhos 2009-12-11 15:56:38 +00:00
parent d38fd20cb7
commit fce3ebbff8
28 changed files with 0 additions and 934 deletions

View file

@ -1,216 +0,0 @@
CONFIG_32BIT=y
# CONFIG_64BIT is not set
# CONFIG_8139TOO is not set
CONFIG_AG71XX=y
CONFIG_AG71XX_AR8216_SUPPORT=y
# CONFIG_AG71XX_DEBUG is not set
CONFIG_AR71XX_MACH_AP81=y
CONFIG_AR71XX_MACH_AP83=y
CONFIG_AR71XX_MACH_AW_NR580=y
CONFIG_AR71XX_MACH_DIR_825_B1=y
CONFIG_AR71XX_MACH_GENERIC=y
CONFIG_AR71XX_MACH_MZK_W04NU=y
CONFIG_AR71XX_MACH_MZK_W300NH=y
CONFIG_AR71XX_MACH_PB42=y
CONFIG_AR71XX_MACH_PB44=y
CONFIG_AR71XX_MACH_RB_4XX=y
CONFIG_AR71XX_MACH_TEW_632BRP=y
CONFIG_AR71XX_MACH_TL_WR1043ND=y
CONFIG_AR71XX_MACH_TL_WR741ND=y
CONFIG_AR71XX_MACH_TL_WR941ND=y
CONFIG_AR71XX_MACH_UBNT=y
CONFIG_AR71XX_MACH_WNDR3700=y
CONFIG_AR71XX_MACH_WNR2000=y
CONFIG_AR71XX_MACH_WP543=y
CONFIG_AR71XX_MACH_WRT160NL=y
CONFIG_AR71XX_MACH_WRT400N=y
CONFIG_AR71XX_WDT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ATHEROS_AR71XX=y
# CONFIG_BCM47XX is not set
CONFIG_BITREVERSE=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
CONFIG_CLASSIC_RCU=y
CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200"
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
# CONFIG_CPU_LOONGSON2 is not set
CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
CONFIG_CPU_MIPSR2=y
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R10000 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_VR41XX is not set
CONFIG_CSRC_R4K=y
CONFIG_DEVPORT=y
# CONFIG_DM9000 is not set
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
CONFIG_GPIOLIB=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_SYSFS=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_HAVE_IDE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HW_HAS_PCI=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_GPIO=y
CONFIG_ICPLUS_PHY=y
# CONFIG_IDE is not set
CONFIG_IMAGE_CMDLINE_HACK=y
CONFIG_INITRAMFS_ROOT_GID=0
CONFIG_INITRAMFS_ROOT_UID=0
CONFIG_INITRAMFS_SOURCE="../../root"
CONFIG_IRQ_CPU=y
# CONFIG_ISDN is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_M25PXX_USE_FAST_READ is not set
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_EMMA is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MACH_TX39XX is not set
# CONFIG_MACH_TX49XX is not set
# CONFIG_MACH_VR41XX is not set
CONFIG_MICREL_PHY=y
# CONFIG_MIKROTIK_RB532 is not set
CONFIG_MIPS=y
# CONFIG_MIPS_COBALT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
CONFIG_MIPS_MACHINE=y
# CONFIG_MIPS_MALTA is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_SIM is not set
CONFIG_MTD_AR91XX_FLASH=y
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_MYLOADER_PARTS=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_RB4XX=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_WRT160NL_PARTS=y
CONFIG_MYLOADER=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_MV88E6060=y
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_TAG_DSA is not set
# CONFIG_NET_DSA_TAG_EDSA is not set
CONFIG_NET_DSA_TAG_TRAILER=y
# CONFIG_NO_IOPORT is not set
# CONFIG_NXP_STB220 is not set
# CONFIG_NXP_STB225 is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PHYLIB=y
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PROBE_INITRD_HEADER is not set
# CONFIG_R6040 is not set
CONFIG_RTL8306_PHY=y
CONFIG_RTL8366_SMI=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_SWARM is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SPI=y
CONFIG_SPI_AP83=y
CONFIG_SPI_AR71XX=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_PB44=y
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_VSC7385 is not set
CONFIG_SWCONFIG=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
# CONFIG_TC35815 is not set
CONFIG_TRAD_SIGNALS=y
CONFIG_USB_SUPPORT=y
# CONFIG_VGASTATE is not set
# CONFIG_VIA_RHINE is not set
CONFIG_YAFFS_9BYTE_TAGS=y
CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED=y
CONFIG_YAFFS_AUTO_YAFFS2=y
# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
CONFIG_YAFFS_FS=y
CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
CONFIG_YAFFS_YAFFS1=y
CONFIG_YAFFS_YAFFS2=y
CONFIG_ZONE_DMA_FLAG=0

View file

@ -1,50 +0,0 @@
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -593,6 +593,13 @@ core-$(CONFIG_TOSHIBA_RBTX4927) += arch/
core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/rbtx4938/
core-$(CONFIG_TOSHIBA_RBTX4939) += arch/mips/txx9/rbtx4939/
+#
+# Atheros AR71xx
+#
+core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/
+cflags-$(CONFIG_ATHEROS_AR71XX) += -I$(srctree)/arch/mips/include/asm/mach-ar71xx
+load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000
+
# temporary until string.h is fixed
cflags-y += -ffreestanding
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -22,6 +22,23 @@ choice
config MACH_ALCHEMY
bool "Alchemy processor based machines"
+config ATHEROS_AR71XX
+ bool "Atheros AR71xx based boards"
+ select CEVT_R4K
+ select CSRC_R4K
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select ARCH_REQUIRE_GPIOLIB
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_HAS_EARLY_PRINTK
+ select MIPS_MACHINE
+ help
+ Support for Atheros AR71xx based boards.
+
config BASLER_EXCITE
bool "Basler eXcite smart camera"
select CEVT_R4K
@@ -598,6 +615,7 @@ config WR_PPMC
endchoice
source "arch/mips/alchemy/Kconfig"
+source "arch/mips/ar71xx/Kconfig"
source "arch/mips/basler/excite/Kconfig"
source "arch/mips/emma/Kconfig"
source "arch/mips/jazz/Kconfig"

View file

@ -1,10 +0,0 @@
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o
obj-$(CONFIG_NEC_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o
obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
+obj-$(CONFIG_ATHEROS_AR71XX) += pci-ar71xx.o pci-ar724x.o
#
# These are still pretty much in the old state, watch, go blind.

View file

@ -1,58 +0,0 @@
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -81,6 +81,13 @@ config USB_EHCI_BIG_ENDIAN_DESC
depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX)
default y
+config USB_EHCI_AR71XX
+ bool "USB EHCI support for AR71xx"
+ depends on USB_EHCI_HCD && ATHEROS_AR71XX
+ default y
+ help
+ Support for Atheros AR71xx built-in EHCI controller
+
config USB_EHCI_FSL
bool "Support for Freescale on-chip EHCI USB controller"
depends on USB_EHCI_HCD && FSL_SOC
@@ -140,6 +147,13 @@ config USB_OHCI_HCD
To compile this driver as a module, choose M here: the
module will be called ohci-hcd.
+config USB_OHCI_AR71XX
+ bool "USB OHCI support for Atheros AR71xx"
+ depends on USB_OHCI_HCD && ATHEROS_AR71XX
+ default y
+ help
+ Support for Atheros AR71xx built-in OHCI controller
+
config USB_OHCI_HCD_PPC_SOC
bool "OHCI support for on-chip PPC USB controller"
depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1036,6 +1036,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ixp4xx_ehci_driver
#endif
+#ifdef CONFIG_USB_EHCI_AR71XX
+#include "ehci-ar71xx.c"
+#define PLATFORM_DRIVER ehci_ar71xx_driver
+#endif
+
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
#error "missing bus glue for ehci-hcd"
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1080,6 +1080,11 @@ MODULE_LICENSE ("GPL");
#define TMIO_OHCI_DRIVER ohci_hcd_tmio_driver
#endif
+#ifdef CONFIG_USB_OHCI_AR71XX
+#include "ohci-ar71xx.c"
+#define PLATFORM_DRIVER ohci_hcd_ar71xx_driver
+#endif
+
#if !defined(PCI_DRIVER) && \
!defined(PLATFORM_DRIVER) && \
!defined(OF_PLATFORM_DRIVER) && \

View file

@ -1,26 +0,0 @@
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -53,6 +53,13 @@ if SPI_MASTER
comment "SPI Master Controller Drivers"
+config SPI_AR71XX
+ tristate "Atheros AR71xx SPI Controller"
+ depends on SPI_MASTER && ATHEROS_AR71XX
+ select SPI_BITBANG
+ help
+ This is the SPI contoller driver for Atheros AR71xx.
+
config SPI_ATMEL
tristate "Atmel SPI Controller"
depends on (ARCH_AT91 || AVR32)
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -11,6 +11,7 @@ endif
obj-$(CONFIG_SPI_MASTER) += spi.o
# SPI master controller drivers (bus)
+obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o
obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o

View file

@ -1,21 +0,0 @@
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2039,6 +2039,8 @@ config ACENIC_OMIT_TIGON_I
The safe and default value for this is N.
+source drivers/net/ag71xx/Kconfig
+
config DL2K
tristate "DL2000/TC902x-based Gigabit Ethernet support"
depends on PCI
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -93,6 +93,7 @@ obj-$(CONFIG_SH_ETH) += sh_eth.o
obj-$(CONFIG_MII) += mii.o
obj-$(CONFIG_PHYLIB) += phy/
+obj-$(CONFIG_AG71XX) += ag71xx/
obj-$(CONFIG_SUNDANCE) += sundance.o
obj-$(CONFIG_HAMACHI) += hamachi.o
obj-$(CONFIG_NET) += Space.o loopback.o

View file

@ -1,26 +0,0 @@
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -747,6 +747,13 @@ config TXX9_WDT
help
Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+config AR71XX_WDT
+ tristate "Atheros AR71xx Watchdog Timer"
+ depends on ATHEROS_AR71XX
+ help
+ Hardware driver for the built-in watchdog timer on the Atheros
+ AR71xx SoCs.
+
# PARISC Architecture
# POWERPC Architecture
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o
# PARISC Architecture

View file

@ -1,26 +0,0 @@
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -257,6 +257,13 @@ config MTD_ALCHEMY
help
Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
+config MTD_AR91XX_FLASH
+ tristate "Atheros AR91xx parallel flash support"
+ depends on ATHEROS_AR71XX
+ select MTD_COMPLEX_MAPPINGS
+ help
+ Parallel flash driver for the Atheros AR91xx based boards.
+
config MTD_DILNETPC
tristate "CFI Flash device mapped on DIL/Net PC"
depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
obj-$(CONFIG_MTD_PCI) += pci.o
obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
+obj-$(CONFIG_MTD_AR91XX_FLASH) += ar91xx_flash.o
obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
obj-$(CONFIG_MTD_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_IMPA7) += impa7.o

View file

@ -1,13 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -503,6 +503,10 @@ static struct flash_info __devinitdata m
{ "at26df161a", 0x1f4601, 0, 64 * 1024, 32, SECT_4K, },
{ "at26df321", 0x1f4701, 0, 64 * 1024, 64, SECT_4K, },
+ /* PMC -- pm25x "blocks" are 32K, sectors are 4K */
+ { "pm25lv512", 0, 32 * 1024, 2, SECT_4K },
+ { "pm25lv010", 0, 32 * 1024, 4, SECT_4K },
+
/* Spansion -- single (large) sector size only, at least
* for the chips listed here (without boot sectors).
*/

View file

@ -1,24 +0,0 @@
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -85,6 +85,11 @@ config RTL8306_PHY
tristate "Driver for Realtek RTL8306S switches"
select SWCONFIG
+config MICREL_PHY
+ tristate "Drivers for Micrel/Kendin PHYs"
+ ---help---
+ Currently has a driver for the KSZ8041
+
config FIXED_PHY
bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
depends on PHYLIB=y
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_ADM6996_PHY) += adm6996.o
obj-$(CONFIG_IP175C_PHY) += ip175c.o
obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
+obj-$(CONFIG_MICREL_PHY) += micrel.o
obj-$(CONFIG_FIXED_PHY) += fixed.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
obj-$(CONFIG_MDIO_OF_GPIO) += mdio-ofgpio.o

View file

@ -1,22 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -711,12 +711,17 @@ static int __devinit m25p_probe(struct s
struct mtd_partition *parts = NULL;
int nr_parts = 0;
+ static const char *part_probes[] = {
#ifdef CONFIG_MTD_CMDLINE_PARTS
- static const char *part_probes[] = { "cmdlinepart", NULL, };
+ "cmdlinepart",
+#endif
+#ifdef CONFIG_MTD_MYLOADER_PARTS
+ "MyLoader",
+#endif
+ NULL, };
nr_parts = parse_mtd_partitions(&flash->mtd,
part_probes, &parts, 0);
-#endif
if (nr_parts <= 0 && data && data->parts) {
parts = data->parts;

View file

@ -1,13 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -503,6 +503,10 @@ static struct flash_info __devinitdata m
{ "at26df161a", 0x1f4601, 0, 64 * 1024, 32, SECT_4K, },
{ "at26df321", 0x1f4701, 0, 64 * 1024, 64, SECT_4K, },
+ /* EON -- en25pxx */
+ { "en25p32", 0x1c2016, 0, 64 * 1024, 64, },
+ { "en25p64", 0x1c2017, 0, 64 * 1024, 128, },
+
/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
{ "pm25lv512", 0, 32 * 1024, 2, SECT_4K },
{ "pm25lv010", 0, 32 * 1024, 4, SECT_4K },

View file

@ -1,12 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -722,6 +722,9 @@ static int __devinit m25p_probe(struct s
#ifdef CONFIG_MTD_MYLOADER_PARTS
"MyLoader",
#endif
+#ifdef CONFIG_MTD_REDBOOT_PARTS
+ "RedBoot",
+#endif
NULL, };
nr_parts = parse_mtd_partitions(&flash->mtd,

View file

@ -1,14 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -507,6 +507,11 @@ static struct flash_info __devinitdata m
{ "en25p32", 0x1c2016, 0, 64 * 1024, 64, },
{ "en25p64", 0x1c2017, 0, 64 * 1024, 128, },
+ /* Macronix -- mx25lxxx */
+ { "mx25l32", 0xc22016, 0, 64 * 1024, 64, },
+ { "mx25l64", 0xc22017, 0, 64 * 1024, 128, },
+ { "mx25l128", 0xc22018, 0, 64 * 1024, 256, },
+
/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
{ "pm25lv512", 0, 32 * 1024, 2, SECT_4K },
{ "pm25lv010", 0, 32 * 1024, 4, SECT_4K },

View file

@ -1,14 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -512,6 +512,11 @@ static struct flash_info __devinitdata m
{ "mx25l64", 0xc22017, 0, 64 * 1024, 128, },
{ "mx25l128", 0xc22018, 0, 64 * 1024, 256, },
+ /* Numonyx -- xxxs33b */
+ { "160s33b", 0x898911, 0, 64 * 1024, 64, },
+ { "320s33b", 0x898912, 0, 64 * 1024, 128, },
+ { "640s33b", 0x898913, 0, 64 * 1024, 256, },
+
/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
{ "pm25lv512", 0, 32 * 1024, 2, SECT_4K },
{ "pm25lv010", 0, 32 * 1024, 4, SECT_4K },

View file

@ -1,29 +0,0 @@
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -159,6 +159,7 @@
#define SST39LF800 0x2781
#define SST39LF160 0x2782
#define SST39VF1601 0x234b
+#define SST39VF6401B 0x236d
#define SST39LF512 0x00D4
#define SST39LF010 0x00D5
#define SST39LF020 0x00D6
@@ -1502,6 +1503,18 @@ static const struct amd_flash_info jedec
ERASEINFO(0x10000,64),
}
}, {
+ .mfr_id = MANUFACTURER_SST,
+ .dev_id = SST39VF6401B,
+ .name = "SST 39VF6401B",
+ .devtypes = CFI_DEVICETYPE_X16,
+ .uaddr = MTD_UADDR_0xAAAA_0x5555,
+ .dev_size = SIZE_8MiB,
+ .cmd_set = P_ID_AMD_STD,
+ .nr_regions = 1,
+ .regions = {
+ ERASEINFO(0x10000,128)
+ }
+ }, {
.mfr_id = MANUFACTURER_ST,
.dev_id = M29F800AB,
.name = "ST M29F800AB",

View file

@ -1,20 +0,0 @@
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1558,7 +1558,7 @@ static int __xipram do_erase_chip(struct
chip->erase_suspended = 0;
}
- if (chip_ready(map, adr))
+ if (chip_good(map, adr, map_word_ff(map)))
break;
if (time_after(jiffies, timeo)) {
@@ -1646,7 +1646,7 @@ static int __xipram do_erase_oneblock(st
chip->erase_suspended = 0;
}
- if (chip_ready(map, adr)) {
+ if (chip_good(map, adr, map_word_ff(map))) {
xip_enable(map, chip, adr);
break;
}

View file

@ -1,37 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -735,6 +735,9 @@ static int __devinit m25p_probe(struct s
#ifdef CONFIG_MTD_REDBOOT_PARTS
"RedBoot",
#endif
+#ifdef CONFIG_MTD_WRT160NL_PARTS
+ "wrt160nl",
+#endif
NULL, };
nr_parts = parse_mtd_partitions(&flash->mtd,
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -172,6 +172,12 @@ config MTD_AR7_PARTS
---help---
TI AR7 partitioning support
+config MTD_WRT160NL_PARTS
+ tristate "Linksys WRT160NL partitioning support"
+ depends on MTD_PARTITIONS && AR71XX_MACH_WRT160NL
+ ---help---
+ Linksys WRT160NL partitioning support
+
config MTD_MYLOADER_PARTS
tristate "MyLoader partition parsing"
depends on MTD_PARTITIONS && (ADM5120 || ATHEROS || ATHEROS_AR71XX)
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
+obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o

View file

@ -1,22 +0,0 @@
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -1082,6 +1082,9 @@ static void end_unlink_async (struct ehc
ehci->reclaim = NULL;
start_unlink_async (ehci, next);
}
+
+ if (ehci->has_synopsys_hc_bug)
+ writel((u32)ehci->async->qh_dma, &ehci->regs->async_next);
}
/* makes sure the async qh will become idle */
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -124,6 +124,7 @@ struct ehci_hcd { /* one per controlle
unsigned has_fsl_port_bug:1; /* FreeScale */
unsigned big_endian_mmio:1;
unsigned big_endian_desc:1;
+ unsigned has_synopsys_hc_bug:1; /* Synopsys HC */
u8 sbrn; /* packed release number */

View file

@ -1,54 +0,0 @@
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -60,31 +60,32 @@ static int parse_redboot_partitions(stru
static char nullstring[] = "unallocated";
#endif
+ buf = vmalloc(master->erasesize);
+ if (!buf)
+ return -ENOMEM;
+
+ restart:
if ( directory < 0 ) {
offset = master->size + directory * master->erasesize;
- while (master->block_isbad &&
+ while (master->block_isbad &&
master->block_isbad(master, offset)) {
if (!offset) {
nogood:
printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
+ vfree(buf);
return -EIO;
}
offset -= master->erasesize;
}
} else {
offset = directory * master->erasesize;
- while (master->block_isbad &&
+ while (master->block_isbad &&
master->block_isbad(master, offset)) {
offset += master->erasesize;
if (offset == master->size)
goto nogood;
}
}
- buf = vmalloc(master->erasesize);
-
- if (!buf)
- return -ENOMEM;
-
printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
master->name, offset);
@@ -156,6 +157,11 @@ static int parse_redboot_partitions(stru
}
if (i == numslots) {
/* Didn't find it */
+ if (offset + master->erasesize < master->size) {
+ /* not at the end of the flash yet, maybe next block :) */
+ directory++;
+ goto restart;
+ }
printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
master->name);
ret = 0;

View file

@ -1,21 +0,0 @@
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -420,4 +420,8 @@ config MTD_NAND_SH_FLCTL
Several Renesas SuperH CPU has FLCTL. This option enables support
for NAND Flash using FLCTL. This driver support SH7723.
+config MTD_NAND_RB4XX
+ tristate "NAND flash driver for RouterBoard 4xx series"
+ depends on MTD_NAND && ATHEROS_AR71XX
+
endif # MTD_NAND
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) +=
obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
obj-$(CONFIG_MTD_ALAUDA) += alauda.o
obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o

View file

@ -1,27 +0,0 @@
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -11,6 +11,7 @@ endif
obj-$(CONFIG_SPI_MASTER) += spi.o
# SPI master controller drivers (bus)
+obj-$(CONFIG_SPI_AP83) += ap83_spi.o
obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o
obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -53,6 +53,14 @@ if SPI_MASTER
comment "SPI Master Controller Drivers"
+config SPI_AP83
+ tristate "Atheros AP83 specific SPI Controller"
+ depends on SPI_MASTER && AR71XX_MACH_AP83
+ select SPI_BITBANG
+ help
+ This is a specific SPI controller driver for the Atheros AP83
+ reference board.
+
config SPI_AR71XX
tristate "Atheros AR71xx SPI Controller"
depends on SPI_MASTER && ATHEROS_AR71XX

View file

@ -1,24 +0,0 @@
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -283,6 +283,11 @@ config SPI_TLE62X0
sysfs interface, with each line presented as a kind of GPIO
exposing both switch control and diagnostic feedback.
+config SPI_VSC7385
+ tristate "Vitesse VSC7385 ethernet switch driver"
+ help
+ SPI driver for the Vitesse VSC7385 ethernet switch.
+
#
# Add new SPI protocol masters in alphabetical order above this line
#
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.
# SPI protocol drivers (device/link on bus)
obj-$(CONFIG_SPI_AT25) += at25.o
obj-$(CONFIG_SPI_SPIDEV) += spidev.o
+obj-$(CONFIG_SPI_VSC7385) += spi_vsc7385.o
obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o
# ... add above this line ...

View file

@ -1,27 +0,0 @@
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -68,6 +68,14 @@ config SPI_AR71XX
help
This is the SPI contoller driver for Atheros AR71xx.
+config SPI_PB44
+ tristate "Atheros PB44 board specific SPI controller"
+ depends on SPI_MASTER && AR71XX_MACH_PB44
+ select SPI_BITBANG
+ help
+ This is a specific SPI controller driver for the Atheros PB44
+ reference board.
+
config SPI_ATMEL
tristate "Atmel SPI Controller"
depends on (ARCH_AT91 || AVR32)
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_SPI_GPIO) += spi_gpio.o
obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o
obj-$(CONFIG_SPI_IMX) += spi_imx.o
obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o
+obj-$(CONFIG_SPI_PB44) += pb44_spi.o
obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o
obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o

View file

@ -1,21 +0,0 @@
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -114,4 +114,8 @@ config MDIO_OF_GPIO
---help---
Supports GPIO lib-based MDIO busses.
+config RTL8366_SMI
+ tristate "Support for RTL8366 switch via SMI interface"
+ depends on GENERIC_GPIO
+
endif # PHYLIB
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_ADM6996_PHY) += adm6996.o
obj-$(CONFIG_IP175C_PHY) += ip175c.o
obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
+obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
obj-$(CONFIG_MICREL_PHY) += micrel.o
obj-$(CONFIG_FIXED_PHY) += fixed.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o

View file

@ -1,22 +0,0 @@
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -167,6 +167,7 @@ endif
#
libs-$(CONFIG_ARC) += arch/mips/fw/arc/
libs-$(CONFIG_CFE) += arch/mips/fw/cfe/
+libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/
libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/
libs-y += arch/mips/fw/lib/
libs-$(CONFIG_SIBYTE_CFE) += arch/mips/sibyte/cfe/
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -789,6 +789,9 @@ config MIPS_NILE4
config MIPS_DISABLE_OBSOLETE_IDE
bool
+config MYLOADER
+ bool
+
config SYNC_R4K
bool

View file

@ -1,29 +0,0 @@
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -47,6 +47,7 @@
#include <asm/mmu_context.h>
#include <asm/types.h>
#include <asm/stacktrace.h>
+#include <asm/time.h>
extern void check_wait(void);
extern asmlinkage void r4k_wait(void);
@@ -1514,6 +1515,8 @@ void __cpuinit per_cpu_trap_init(void)
*/
if (cpu_has_mips_r2) {
cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
+ if (get_c0_compare_irq)
+ cp0_compare_irq = get_c0_compare_irq();
cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
if (cp0_perfcount_irq == cp0_compare_irq)
cp0_perfcount_irq = -1;
--- a/arch/mips/include/asm/time.h
+++ b/arch/mips/include/asm/time.h
@@ -53,6 +53,7 @@ extern int (*perf_irq)(void);
#ifdef CONFIG_CEVT_R4K
extern int mips_clockevent_init(void);
extern unsigned int __weak get_c0_compare_int(void);
+extern unsigned int __weak get_c0_compare_irq(void);
#else
static inline int mips_clockevent_init(void)
{

View file

@ -1,56 +0,0 @@
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -15,6 +15,22 @@
#include <asm/cevt-r4k.h>
/*
+ * Compare interrupt can be routed and latched outside the core,
+ * so a single execution hazard barrier may not be enough to give
+ * it time to clear as seen in the Cause register. 4 time the
+ * pipeline depth seems reasonably conservative, and empirically
+ * works better in configurations with high CPU/bus clock ratios.
+ */
+
+#define compare_change_hazard() \
+ do { \
+ irq_disable_hazard(); \
+ irq_disable_hazard(); \
+ irq_disable_hazard(); \
+ irq_disable_hazard(); \
+ } while (0)
+
+/*
* The SMTC Kernel for the 34K, 1004K, et. al. replaces several
* of these routines with SMTC-specific variants.
*/
@@ -30,6 +46,7 @@ static int mips_next_event(unsigned long
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
+ compare_change_hazard();
res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
return res;
}
@@ -99,22 +116,6 @@ static int c0_compare_int_pending(void)
return (read_c0_cause() >> cp0_compare_irq) & 0x100;
}
-/*
- * Compare interrupt can be routed and latched outside the core,
- * so a single execution hazard barrier may not be enough to give
- * it time to clear as seen in the Cause register. 4 time the
- * pipeline depth seems reasonably conservative, and empirically
- * works better in configurations with high CPU/bus clock ratios.
- */
-
-#define compare_change_hazard() \
- do { \
- irq_disable_hazard(); \
- irq_disable_hazard(); \
- irq_disable_hazard(); \
- irq_disable_hazard(); \
- } while (0)
-
int c0_compare_int_usable(void)
{
unsigned int delta;