ar71xx: add support for TL-WR802N Version 2
This patch adds support for the TP-Link TL-WR802N Version 2. Specification: - SoC: Qualcomm Atheros QCA9533 (560 MHz, MIPS 24Kc) - RAM: 32 MiB - Storage: 4 MiB of FLash on board - Wireless: Built into QCA9533 (Honey Bee), PHY modes b/g/n - Ethernet: 1x100M (port0) Installation through OEM Web Interface: - Connect to TL-WR802N by Ethernet or Wi-Fi - Go to http://192.168.0.1 (default user is "admin" & password is "admin) - Go to "System Tools -> Firmware Upgrade" - Browse for firmware "*.factory-us.bin" or "*.factory-eu.bin" for eu model - Click upgrade Installation through tftp: Note: T_OUT, T_IN and GND on the board must be connected to USB TTL Serial Configuration 115200 8n1 - Boot the TL-WR802N - When "Autobooting in 1 seconds" appears type "tpl" followed by enter - Connect to the board Ethernet port (IPADDR: 192.168.1.1, ServerIP: 192.168.1.10) - tftpboot 0x80000000 <Firmware Image Name> - Record the result of "printenv bootcmd" - Enter "erase <Result of 'printenv bootcmd'> +0x3c0000" (e.g erase 0x9f020000 +0x3c0000) - Enter "cp.b 0x80000000 <Result of 'printenv bootcmd'> 0x3c0000" (e.g cp.b 0x80000000 0x9f020000 0x3c0000) - Enter "bootm <Result of 'printenv bootcmd'>" (e.g bootm 0x9f020000) Signed-off-by: Thomas Roberts <tom.p.roberts@gmail.com>
This commit is contained in:
parent
7c9f5c7e6b
commit
f9278337cf
12 changed files with 136 additions and 2 deletions
|
@ -667,6 +667,9 @@ tl-wpa8630)
|
|||
tl-wr802n-v1)
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:system" "phy0tpt"
|
||||
;;
|
||||
tl-wr802n-v2)
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:system" "phy0tpt"
|
||||
;;
|
||||
tl-wr940n-v4|\
|
||||
tl-wr941nd-v6)
|
||||
ucidef_set_led_netdev "wan" "WAN" "tp-link:blue:wan" "eth0"
|
||||
|
|
|
@ -116,6 +116,7 @@ ar71xx_setup_interfaces()
|
|||
tl-wa901nd-v4|\
|
||||
tl-wr703n|\
|
||||
tl-wr802n-v1|\
|
||||
tl-wr802n-v2|\
|
||||
tube2h|\
|
||||
unifiac-lite|\
|
||||
wndap360|\
|
||||
|
|
|
@ -26,6 +26,7 @@ get_status_led() {
|
|||
minibox-v1|\
|
||||
som9331|\
|
||||
sr3200|\
|
||||
tl-wr802n-v2|\
|
||||
xd3200)
|
||||
status_led="$board:green:system"
|
||||
;;
|
||||
|
|
|
@ -220,6 +220,10 @@ tplink_board_detect() {
|
|||
;;
|
||||
"080200"*)
|
||||
model="TP-Link TL-WR802N"
|
||||
|
||||
if [ "$hwid" = '08020002' -a "$mid" = '00000002' ]; then
|
||||
hwver=' v2'
|
||||
fi
|
||||
;;
|
||||
"083000"*)
|
||||
model="TP-Link TL-WA830RE"
|
||||
|
@ -1031,6 +1035,9 @@ ar71xx_board_detect() {
|
|||
*"TL-WR802N v1")
|
||||
name="tl-wr802n-v1"
|
||||
;;
|
||||
*"TL-WR802N v2")
|
||||
name="tl-wr802n-v2"
|
||||
;;
|
||||
*TL-WA901ND)
|
||||
name="tl-wa901nd"
|
||||
;;
|
||||
|
|
|
@ -430,6 +430,7 @@ platform_check_image() {
|
|||
tl-wr741nd-v4|\
|
||||
tl-wr741nd|\
|
||||
tl-wr802n-v1|\
|
||||
tl-wr802n-v2|\
|
||||
tl-wr810n|\
|
||||
tl-wr841n-v11|\
|
||||
tl-wr841n-v1|\
|
||||
|
|
|
@ -193,6 +193,7 @@ CONFIG_ATH79_MACH_TL_WR720N_V3=y
|
|||
CONFIG_ATH79_MACH_TL_WR741ND=y
|
||||
CONFIG_ATH79_MACH_TL_WR741ND_V4=y
|
||||
CONFIG_ATH79_MACH_TL_WR802N_V1=y
|
||||
CONFIG_ATH79_MACH_TL_WR802N_V2=y
|
||||
CONFIG_ATH79_MACH_TL_WR810N=y
|
||||
CONFIG_ATH79_MACH_TL_WR841N_V1=y
|
||||
CONFIG_ATH79_MACH_TL_WR841N_V8=y
|
||||
|
|
|
@ -1533,6 +1533,14 @@ config ATH79_MACH_TL_WR802N_V1
|
|||
select ATH79_DEV_LEDS_GPIO
|
||||
select ATH79_DEV_M25P80
|
||||
|
||||
config ATH79_MACH_TL_WR802N_V2
|
||||
bool "TP-LINK TL-WR802N v2 support"
|
||||
select SOC_QCA953X
|
||||
select ATH79_DEV_ETH
|
||||
select ATH79_DEV_GPIO_BUTTONS
|
||||
select ATH79_DEV_LEDS_GPIO
|
||||
select ATH79_DEV_M25P80
|
||||
|
||||
config ATH79_MACH_TL_WR810N
|
||||
bool "TP-LINK TL-WR810N support"
|
||||
select SOC_QCA953X
|
||||
|
|
|
@ -198,6 +198,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3) += mach-tl-wr720n-v3.o
|
|||
obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o
|
||||
obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o
|
||||
obj-$(CONFIG_ATH79_MACH_TL_WR802N_V1) += mach-tl-wr802n.o
|
||||
obj-$(CONFIG_ATH79_MACH_TL_WR802N_V2) += mach-tl-wr802n-v2.o
|
||||
obj-$(CONFIG_ATH79_MACH_TL_WR810N) += mach-tl-wr810n.o
|
||||
obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
|
||||
obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o
|
||||
|
|
|
@ -0,0 +1,97 @@
|
|||
/*
|
||||
* TP-LINK TL-WR802N v2
|
||||
*
|
||||
* Copyright (C) 2016 Thomas Roberts <tom.p.roberts@gmail.com <mailto:tom.p.roberts@gmail.com>>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#include <asm/mach-ath79/ath79.h>
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-wmac.h"
|
||||
#include "machtypes.h"
|
||||
|
||||
#define TL_WR802N_V2_GPIO_LED_SYSTEM 13
|
||||
#define TL_WR802N_V2_GPIO_BTN_RESET 11
|
||||
|
||||
#define TL_WR802N_V2_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||
#define TL_WR802N_V2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR802N_V2_KEYS_POLL_INTERVAL)
|
||||
|
||||
static const char *tl_wr802n_v2_part_probes[] = {
|
||||
"tp-link",
|
||||
NULL,
|
||||
};
|
||||
|
||||
static struct flash_platform_data tl_wr802n_v2_flash_data = {
|
||||
.part_probes = tl_wr802n_v2_part_probes,
|
||||
};
|
||||
|
||||
static struct gpio_led tl_wr802n_v2_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "tl-wr802n-v2:green:system",
|
||||
.gpio = TL_WR802N_V2_GPIO_LED_SYSTEM,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_button tl_wr802n_v2_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "reset",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = TL_WR802N_V2_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = TL_WR802N_V2_GPIO_BTN_RESET,
|
||||
.active_low = 0,
|
||||
}
|
||||
};
|
||||
|
||||
static void __init tl_ap143_setup(void)
|
||||
{
|
||||
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
|
||||
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
|
||||
u8 tmpmac[ETH_ALEN];
|
||||
|
||||
ath79_register_m25p80(&tl_wr802n_v2_flash_data);
|
||||
|
||||
ath79_setup_ar933x_phy4_switch(false, false);
|
||||
|
||||
ath79_register_mdio(0, 0x0);
|
||||
|
||||
/* LAN */
|
||||
ath79_switch_data.phy4_mii_en = 1;
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
||||
ath79_eth0_data.duplex = DUPLEX_FULL;
|
||||
ath79_eth0_data.speed = SPEED_100;
|
||||
ath79_eth0_data.phy_mask = BIT(4);
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
|
||||
ath79_register_eth(0);
|
||||
|
||||
ath79_init_mac(tmpmac, mac, 0);
|
||||
ath79_register_wmac(ee, tmpmac);
|
||||
};
|
||||
|
||||
static void __init tl_wr802n_v2_setup(void)
|
||||
{
|
||||
tl_ap143_setup();
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr802n_v2_leds_gpio),
|
||||
tl_wr802n_v2_leds_gpio);
|
||||
|
||||
ath79_register_gpio_keys_polled(1, TL_WR802N_V2_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(tl_wr802n_v2_gpio_keys),
|
||||
tl_wr802n_v2_gpio_keys);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_TL_WR802N_V2, "TL-WR802N-v2", "TP-LINK TL-WR802N v2",
|
||||
tl_wr802n_v2_setup);
|
|
@ -237,6 +237,7 @@ enum ath79_mach_type {
|
|||
ATH79_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */
|
||||
ATH79_MACH_TL_WR741ND_V4, /* TP-LINK TL-WR741ND v4 */
|
||||
ATH79_MACH_TL_WR802N_V1, /* TP-LINK TL-WR802N v1 */
|
||||
ATH79_MACH_TL_WR802N_V2, /* TP-LINK TL-WR802N v2 */
|
||||
ATH79_MACH_TL_WR810N, /* TP-LINK TL-WR810N */
|
||||
ATH79_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */
|
||||
ATH79_MACH_TL_WR841N_V11, /* TP-LINK TL-WR841N/ND v11 */
|
||||
|
|
|
@ -631,12 +631,24 @@ TARGET_DEVICES += tl-wr740n-v1 tl-wr740n-v3 tl-wr740n-v4 tl-wr740n-v5 tl-wr740n-
|
|||
define Device/tl-wr802n-v1
|
||||
$(Device/tplink-4mlzma)
|
||||
DEVICE_TITLE := TP-LINK TL-WR802N v1
|
||||
BOARDNAME := TL-WR802N-v1
|
||||
BOARDNAME := TL-WR802N-v1
|
||||
DEVICE_PROFILE := TLWR802
|
||||
TPLINK_HWID := 0x08020001
|
||||
TPLINK_HWREV := 1
|
||||
endef
|
||||
TARGET_DEVICES += tl-wr802n-v1
|
||||
|
||||
define Device/tl-wr802n-v2
|
||||
$(Device/tplink-4mlzma)
|
||||
DEVICE_TITLE := TP-LINK TL-WR802N v2
|
||||
BOARDNAME := TL-WR802N-v2
|
||||
DEVICE_PROFILE := TLWR802
|
||||
TPLINK_HWID := 0x08020002
|
||||
TPLINK_HWREV := 2
|
||||
IMAGES += factory-us.bin factory-eu.bin
|
||||
IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US
|
||||
IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
|
||||
endef
|
||||
TARGET_DEVICES += tl-wr802n-v1 tl-wr802n-v2
|
||||
|
||||
define Device/tl-wr841-v1.5
|
||||
$(Device/tplink-4m)
|
||||
|
|
|
@ -158,6 +158,7 @@ CONFIG_ATH79_MACH_RBSXTLITE=y
|
|||
# CONFIG_ATH79_MACH_TL_WR741ND is not set
|
||||
# CONFIG_ATH79_MACH_TL_WR741ND_V4 is not set
|
||||
# CONFIG_ATH79_MACH_TL_WR802N_V1 is not set
|
||||
# CONFIG_ATH79_MACH_TL_WR802N_V2 is not set
|
||||
# CONFIG_ATH79_MACH_TL_WR810N is not set
|
||||
# CONFIG_ATH79_MACH_TL_WR841N_V1 is not set
|
||||
# CONFIG_ATH79_MACH_TL_WR841N_V8 is not set
|
||||
|
|
Loading…
Reference in a new issue