add dirclean targets, add jffs2root compile

SVN-Revision: 277
This commit is contained in:
Waldemar Brodkorb 2005-02-21 04:42:12 +00:00
parent 4d6bb280f0
commit f90704841d

View file

@ -34,6 +34,8 @@ linksys-shared: $(TARGET_DIR)/$(LINKSYS_SHARED_TARGET_BINARY)
linksys-shared-clean:
-$(MAKE) -C $(LINKSYS_SHARED_DIR) clean
linksys-shared-dirclean:
rm -rf $(LINKSYS_SHARED_DIR)
# nvram tool extracted from linksys firmware GPL sourcetree
# WRT54GS_3_37_2_1109_US
@ -59,6 +61,9 @@ linksys-nvram: $(TARGET_DIR)/$(LINKSYS_NVRAM_TARGET_BINARY)
linksys-nvram-clean:
-$(MAKE) -C $(LINKSYS_NVRAM_BUILD_DIR) clean
linksys-nvram-dirclean:
rm -rf $(LINKSYS_NVRAM_BUILD_DIR)
# wlconf tool extracted from linksys firmware GPL sourcetree
# WRT54GS_3_37_2_1109_US
LINKSYS_WLCONF_TGZ=linksys-wlconf.tar.gz
@ -88,6 +93,8 @@ linksys-wlconf: $(TARGET_DIR)/$(LINKSYS_WLCONF_TARGET_BINARY)
linksys-wlconf-clean:
-$(MAKE) -C $(LINKSYS_WLCONF_BUILD_DIR) clean
linksys-wlconf-dirclean:
rm -rf $(LINKSYS_WLCONF_BUILD_DIR)
# mtd tool
OPENWRT_MTD_SOURCE=package/openwrt/mtd.c
@ -98,6 +105,21 @@ $(TARGET_DIR)/$(OPENWRT_MTD_TARGET_BINARY):
openwrt-mtd: $(TARGET_DIR)/$(OPENWRT_MTD_TARGET_BINARY)
openwrt-mtd-clean:
rm $(TARGET_DIR)/$(OPENWRT_MTD_TARGET_BINARY)
# jffs2root tool
OPENWRT_JFFS2ROOT_SOURCE=package/openwrt/jffs2root.c
OPENWRT_JFFS2ROOT_TARGET_BINARY:=sbin/jffs2root
$(TARGET_DIR)/$(OPENWRT_JFFS2ROOT_TARGET_BINARY):
$(TARGET_CC) -o $(TARGET_DIR)/$(OPENWRT_JFFS2ROOT_TARGET_BINARY) $(OPENWRT_JFFS2ROOT_SOURCE)
openwrt-jffs2root: $(TARGET_DIR)/$(OPENWRT_JFFS2ROOT_TARGET_BINARY)
openwrt-jffs2root-clean:
rm $(TARGET_DIR)/$(OPENWRT_JFFS2ROOT_TARGET_BINARY)
# trx tool
OPENWRT_TRX_SOURCE=package/openwrt/trx.c
OPENWRT_TRX_TARGET=$(STAGING_DIR)/bin/trx
@ -107,6 +129,9 @@ $(OPENWRT_TRX_TARGET):
openwrt-trx: $(OPENWRT_TRX_TARGET)
openwrt-trx-clean:
rm $(OPENWRT_TRX_TARGET)
# addpattern tool
OPENWRT_ADDPATTERN_SOURCE=package/openwrt/addpattern.c
OPENWRT_ADDPATTERN_TARGET=$(STAGING_DIR)/bin/addpattern
@ -116,5 +141,8 @@ $(OPENWRT_ADDPATTERN_TARGET):
openwrt-addpattern: $(OPENWRT_ADDPATTERN_TARGET)
openwrt-addpattern-clean:
rm $(OPENWRT_ADDPATTERN_TARGET)
openwrt: linksys-shared linksys-nvram linksys-wlconf openwrt-mtd openwrt-trx openwrt-addpattern