kernel: fix some mistakes in ssb patch refresh in r22766, r22767 and r22768.

SVN-Revision: 22774

target/linux/generic/patches-2.6.32/975-ssb_update.patch

@@ -322,31 +322,6 @@
  	}
  
  	return err;
---- a/drivers/ssb/pci.c
-+++ b/drivers/ssb/pci.c
-@@ -17,6 +17,7 @@
- 
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_regs.h>
-+#include <linux/slab.h>
- #include <linux/pci.h>
- #include <linux/delay.h>
- 
-@@ -642,6 +643,14 @@ static int ssb_pci_sprom_get(struct ssb_
- 	}
- 	ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
- 
-+	if (!ssb_is_sprom_available(bus)) {
-+		ssb_printk(KERN_ERR PFX "No SPROM available!\n");
-+		return -ENODEV;
-+	}
-+
-+	bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ?
-+		SSB_SPROM_BASE1 : SSB_SPROM_BASE31;
-+
- 	buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
- 	if (!buf)
- 		goto out;
 --- a/drivers/ssb/pcihost_wrapper.c
 +++ b/drivers/ssb/pcihost_wrapper.c
 @@ -12,6 +12,7 @@
@@ -664,26 +639,6 @@
  	if (err)
  		ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
  out_unlock:
-@@ -192,5 +189,19 @@ bool ssb_is_sprom_available(struct ssb_b
- 	    bus->chipco.dev->id.revision >= 31)
- 		return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
- 
-+	return true;
-+}
-+
-+/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
-+bool ssb_is_sprom_available(struct ssb_bus *bus)
-+{
-+	/* status register only exists on chipcomon rev >= 11 and we need check
-+	   for >= 31 only */
-+	/* this routine differs from specs as we do not access SPROM directly
-+	   on PCMCIA */
-+	if (bus->bustype == SSB_BUSTYPE_PCI &&
-+	    bus->chipco.dev->id.revision >= 31)
-+		return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
-+
- 	return true;
- }
 --- a/drivers/ssb/ssb_private.h
 +++ b/drivers/ssb/ssb_private.h
 @@ -176,19 +176,27 @@ extern const struct ssb_sprom *ssb_get_f
@@ -762,16 +717,6 @@
  
  	/* See enum ssb_quirks */
  	unsigned int quirks;
-@@ -393,6 +397,9 @@ extern void ssb_bus_unregister(struct ss
- 
- /* Does the device have an SPROM? */
- extern bool ssb_is_sprom_available(struct ssb_bus *bus);
-+
-+/* Does the device have an SPROM? */
-+extern bool ssb_is_sprom_available(struct ssb_bus *bus);
- 
- /* Set a fallback SPROM.
-  * See kdoc at the function definition for complete documentation. */
 --- a/include/linux/ssb/ssb_regs.h
 +++ b/include/linux/ssb/ssb_regs.h
 @@ -198,63 +198,63 @@

target/linux/generic/patches-2.6.32/977-ssb_export_fallback_sprom.patch

@@ -10,7 +10,7 @@
  bool ssb_is_sprom_available(struct ssb_bus *bus)
 --- a/include/linux/ssb/ssb.h
 +++ b/include/linux/ssb/ssb.h
-@@ -404,6 +404,7 @@ extern bool ssb_is_sprom_available(struc
+@@ -401,6 +401,7 @@ extern bool ssb_is_sprom_available(struc
  /* Set a fallback SPROM.
   * See kdoc at the function definition for complete documentation. */
  extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);

target/linux/generic/patches-2.6.33/975-ssb_update.patch

@@ -115,26 +115,6 @@
  	}
  
  	return err;
---- a/drivers/ssb/sprom.c
-+++ b/drivers/ssb/sprom.c
-@@ -190,3 +190,17 @@ bool ssb_is_sprom_available(struct ssb_b
- 
- 	return true;
- }
-+
-+/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
-+bool ssb_is_sprom_available(struct ssb_bus *bus)
-+{
-+	/* status register only exists on chipcomon rev >= 11 and we need check
-+	   for >= 31 only */
-+	/* this routine differs from specs as we do not access SPROM directly
-+	   on PCMCIA */
-+	if (bus->bustype == SSB_BUSTYPE_PCI &&
-+	    bus->chipco.dev->id.revision >= 31)
-+		return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
-+
-+	return true;
-+}
 --- a/drivers/ssb/ssb_private.h
 +++ b/drivers/ssb/ssb_private.h
 @@ -196,7 +196,7 @@ extern int ssb_devices_thaw(struct ssb_f
@@ -154,26 +134,6 @@
 +#endif /* CONFIG_SSB_B43_PCI_BRIDGE */
  
  #endif /* LINUX_SSB_PRIVATE_H_ */
---- a/include/linux/ssb/ssb.h
-+++ b/include/linux/ssb/ssb.h
-@@ -305,6 +305,7 @@ struct ssb_bus {
- 	/* ID information about the Chip. */
- 	u16 chip_id;
- 	u16 chip_rev;
-+	u16 sprom_offset;
- 	u16 sprom_size;		/* number of words in sprom */
- 	u16 sprom_offset;
- 	u8 chip_package;
-@@ -395,6 +396,9 @@ extern int ssb_bus_sdiobus_register(stru
- 
- extern void ssb_bus_unregister(struct ssb_bus *bus);
- 
-+/* Does the device have an SPROM? */
-+extern bool ssb_is_sprom_available(struct ssb_bus *bus);
-+
- /* Set a fallback SPROM.
-  * See kdoc at the function definition for complete documentation. */
- extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
 --- a/include/linux/ssb/ssb_driver_chipcommon.h
 +++ b/include/linux/ssb/ssb_driver_chipcommon.h
 @@ -54,6 +54,7 @@

target/linux/generic/patches-2.6.34/975-ssb_update.patch

@@ -527,35 +527,6 @@
  /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
  #define SPEX16(_outvar, _offset, _mask, _shift)	\
  	out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
-@@ -623,6 +623,28 @@ static int ssb_pci_sprom_get(struct ssb_
- 
- 	if (!ssb_is_sprom_available(bus)) {
- 		ssb_printk(KERN_ERR PFX "No SPROM available!\n");
-+		return -ENODEV;
-+	}
-+	if (bus->chipco.dev) {	/* can be unavailible! */
-+		/*
-+		 * get SPROM offset: SSB_SPROM_BASE1 except for
-+		 * chipcommon rev >= 31 or chip ID is 0x4312 and
-+		 * chipcommon status & 3 == 2
-+		 */
-+		if (bus->chipco.dev->id.revision >= 31)
-+			bus->sprom_offset = SSB_SPROM_BASE31;
-+		else if (bus->chip_id == 0x4312 &&
-+			 (bus->chipco.status & 0x03) == 2)
-+			bus->sprom_offset = SSB_SPROM_BASE31;
-+		else
-+			bus->sprom_offset = SSB_SPROM_BASE1;
-+	} else {
-+		bus->sprom_offset = SSB_SPROM_BASE1;
-+	}
-+	ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
-+
-+	if (!ssb_is_sprom_available(bus)) {
-+		ssb_printk(KERN_ERR PFX "No SPROM available!\n");
- 		return -ENODEV;
- 	}
- 	if (bus->chipco.dev) {	/* can be unavailible! */
 --- a/include/linux/ssb/ssb.h
 +++ b/include/linux/ssb/ssb.h
 @@ -167,7 +167,7 @@ struct ssb_device {
@@ -567,17 +538,7 @@
  
  	struct ssb_bus *bus;
  	struct ssb_device_id id;
-@@ -398,6 +398,9 @@ extern void ssb_bus_unregister(struct ss
+@@ -470,14 +470,6 @@ extern u32 ssb_dma_translation(struct ss
- /* Does the device have an SPROM? */
- extern bool ssb_is_sprom_available(struct ssb_bus *bus);
- 
-+/* Does the device have an SPROM? */
-+extern bool ssb_is_sprom_available(struct ssb_bus *bus);
-+
- /* Set a fallback SPROM.
-  * See kdoc at the function definition for complete documentation. */
- extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
-@@ -470,14 +473,6 @@ extern u32 ssb_dma_translation(struct ss
  #define SSB_DMA_TRANSLATION_MASK	0xC0000000
  #define SSB_DMA_TRANSLATION_SHIFT	30
  
@@ -592,7 +553,7 @@
  static inline void __cold __ssb_dma_not_implemented(struct ssb_device *dev)
  {
  #ifdef CONFIG_SSB_DEBUG
-@@ -486,155 +481,6 @@ static inline void __cold __ssb_dma_not_
+@@ -486,155 +478,6 @@ static inline void __cold __ssb_dma_not_
  #endif /* DEBUG */
  }
  

target/linux/generic/patches-2.6.34/977-ssb_export_fallback_sprom.patch

@@ -10,7 +10,7 @@
  bool ssb_is_sprom_available(struct ssb_bus *bus)
 --- a/include/linux/ssb/ssb.h
 +++ b/include/linux/ssb/ssb.h
-@@ -404,6 +404,7 @@ extern bool ssb_is_sprom_available(struc
+@@ -401,6 +401,7 @@ extern bool ssb_is_sprom_available(struc
  /* Set a fallback SPROM.
   * See kdoc at the function definition for complete documentation. */
  extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);