KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

remove 2.6.26 specific stuff

Browse source 
SVN-Revision: 14493
This commit is contained in:
Gabor Juhos 2009-02-13 08:56:13 +00:00
parent eda8310293
commit f245bc83f2
19 changed files with 0 additions and 767 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

266
target/linux/ar71xx/config-2.6.26
View file

@ -1,266 +0,0 @@
CONFIG_32BIT=y
# CONFIG_64BIT is not set
# CONFIG_8139TOO is not set
CONFIG_ADM6996_PHY=y
CONFIG_AG71XX=y
# CONFIG_AR71XX_EARLY_SERIAL is not set
CONFIG_AR71XX_MACH_AP83=y
CONFIG_AR71XX_MACH_AW_NR580=y
CONFIG_AR71XX_MACH_GENERIC=y
CONFIG_AR71XX_MACH_MZK_W04NU=y
CONFIG_AR71XX_MACH_MZK_W300NH=y
CONFIG_AR71XX_MACH_PB42=y
CONFIG_AR71XX_MACH_RB_4XX=y
CONFIG_AR71XX_MACH_TEW_632BRP=y
CONFIG_AR71XX_MACH_UBNT=y
CONFIG_AR71XX_MACH_WNR2000=y
CONFIG_AR71XX_MACH_WP543=y
CONFIG_AR71XX_WDT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ATHEROS_AR71XX=y
CONFIG_BASE_SMALL=0
# CONFIG_BCM47XX is not set
CONFIG_BITREVERSE=y
# CONFIG_BROADCOM_PHY is not set
CONFIG_CEVT_R4K=y
CONFIG_CLASSIC_RCU=y
CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 init=/etc/preinit"
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
# CONFIG_CPU_LOONGSON2 is not set
CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
CONFIG_CPU_MIPSR2=y
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R10000 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_VR41XX is not set
CONFIG_CSRC_R4K=y
CONFIG_DEVPORT=y
# CONFIG_DM9000 is not set
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_E1000E_ENABLED is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_FIXED_PHY is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
CONFIG_GPIO_SYSFS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_HAVE_GPIO_LIB=y
CONFIG_HAVE_IDE=y
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=m
# CONFIG_I2C is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
CONFIG_ICPLUS_PHY=y
# CONFIG_IDE is not set
CONFIG_INITRAMFS_ROOT_GID=0
CONFIG_INITRAMFS_ROOT_UID=0
CONFIG_INITRAMFS_SOURCE="../../root"
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IRQ_CPU=y
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_LEDS_ALIX is not set
CONFIG_LEDS_GPIO=y
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_M25PXX_USE_FAST_READ is not set
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_MICREL_PHY=y
CONFIG_MIPS=y
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_COBALT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
CONFIG_MIPS_MACHINE=y
# CONFIG_MIPS_MALTA is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
CONFIG_MTD=y
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_MTD_BLOCK2MTD is not set
# CONFIG_MTD_CFI is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CHAR=y
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_CONCAT=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_M25P80=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_MYLOADER_PARTS=y
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_NAND_RB4XX=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_RAM is not set
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_SLRAM is not set
CONFIG_MYLOADER=y
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NO_IOPORT is not set
CONFIG_PAGEFLAGS_EXTENDED=y
# CONFIG_PAGE_SIZE_16KB is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_PAGE_SIZE_8KB is not set
CONFIG_PCI=y
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_PCI_DOMAINS=y
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_PHYLIB=y
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
CONFIG_PROM_EMU=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_R6040 is not set
# CONFIG_REALTEK_PHY is not set
CONFIG_RFKILL_LEDS=y
CONFIG_RTC_LIB=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_SWARM is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPI=y
CONFIG_SPI_AR71XX=y
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_SPIDEV is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
# CONFIG_TC35815 is not set
CONFIG_TICK_ONESHOT=y
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_TRAD_SIGNALS=y
CONFIG_USB=m
CONFIG_USB_EHCI_AR71XX=y
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_OHCI_AR71XX=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_SUPPORT=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIA_RHINE is not set
CONFIG_VIDEO_MEDIA=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_YAFFS_9BYTE_TAGS=y
CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED=y
CONFIG_YAFFS_AUTO_YAFFS2=y
CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=0
# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
CONFIG_YAFFS_FS=y
CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
CONFIG_YAFFS_YAFFS1=y
CONFIG_YAFFS_YAFFS2=y
CONFIG_ZONE_DMA_FLAG=0

51
target/linux/ar71xx/patches-2.6.26/001-ar71xx_core.patch
View file

@ -1,51 +0,0 @@
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -597,6 +597,13 @@ core-$(CONFIG_TOSHIBA_RBTX4938) += arch/
cflags-$(CONFIG_TOSHIBA_RBTX4938) += -Iinclude/asm-mips/mach-tx49xx
load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000
+#
+# Atheros AR71xx
+#
+core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/
+cflags-$(CONFIG_ATHEROS_AR71XX) += -Iinclude/asm-mips/mach-ar71xx
+load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000
+
# temporary until string.h is fixed
cflags-y += -ffreestanding
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -21,6 +21,24 @@ choice
config MACH_ALCHEMY
bool "Alchemy processor based machines"
+config ATHEROS_AR71XX
+ bool "Atheros AR71xx based boards"
+ select CEVT_R4K
+ select CSRC_R4K
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select GENERIC_GPIO
+ select HAVE_GPIO_LIB
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_HAS_EARLY_PRINTK
+ select MIPS_MACHINE
+ help
+ Support for Atheros AR71xx based boards.
+
config BASLER_EXCITE
bool "Basler eXcite smart camera"
select CEVT_R4K
@@ -687,6 +705,7 @@ config WR_PPMC
endchoice
+source "arch/mips/ar71xx/Kconfig"
source "arch/mips/au1000/Kconfig"
source "arch/mips/basler/excite/Kconfig"
source "arch/mips/jazz/Kconfig"

10
target/linux/ar71xx/patches-2.6.26/002-ar71xx_pci.patch
View file

@ -1,10 +0,0 @@
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.
obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o
obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
+obj-$(CONFIG_ATHEROS_AR71XX) += pci-ar71xx.o
#
# These are still pretty much in the old state, watch, go blind.

70
target/linux/ar71xx/patches-2.6.26/003-ar71xx_usb_host.patch
View file

@ -1,70 +0,0 @@
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -81,6 +81,12 @@ config USB_EHCI_BIG_ENDIAN_DESC
depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX)
default y
+config USB_EHCI_AR71XX
+ bool "USB EHCI support for AR71xx"
+ depends on USB_EHCI_HCD && ATHEROS_AR71XX
+ help
+ Support for Atheros AR71xx built-in EHCI controller
+
config USB_EHCI_FSL
bool "Support for Freescale on-chip EHCI USB controller"
depends on USB_EHCI_HCD && FSL_SOC
@@ -152,6 +158,12 @@ config USB_OHCI_HCD
To compile this driver as a module, choose M here: the
module will be called ohci-hcd.
+config USB_OHCI_AR71XX
+ bool "USB OHCI support for Atheros AR71xx"
+ depends on USB_OHCI_HCD && ATHEROS_AR71XX
+ help
+ Support for Atheros AR71xx built-in OHCI controller
+
config USB_OHCI_HCD_PPC_SOC
bool "OHCI support for on-chip PPC USB controller"
depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1034,6 +1034,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ixp4xx_ehci_driver
#endif
+#ifdef CONFIG_USB_EHCI_AR71XX
+#include "ehci-ar71xx.c"
+#define PLATFORM_DRIVER ehci_ar71xx_driver
+#endif
+
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
#error "missing bus glue for ehci-hcd"
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -538,6 +538,11 @@ static inline struct usb_hcd *ohci_to_hc
#define writel_be(val, addr) out_be32((__force unsigned *)addr, val)
#endif
+#if defined(CONFIG_ATHEROS_AR71XX)
+#define readl_be(addr) __raw_readl(addr)
+#define writel_be(val, addr) __raw_writel(addr, val)
+#endif
+
static inline unsigned int _ohci_readl (const struct ohci_hcd *ohci,
__hc32 __iomem * regs)
{
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1057,6 +1057,11 @@ MODULE_LICENSE ("GPL");
#define SM501_OHCI_DRIVER ohci_hcd_sm501_driver
#endif
+#ifdef CONFIG_USB_OHCI_AR71XX
+#include "ohci-ar71xx.c"
+#define PLATFORM_DRIVER ohci_hcd_ar71xx_driver
+#endif
+
#if !defined(PCI_DRIVER) && \
!defined(PLATFORM_DRIVER) && \
!defined(OF_PLATFORM_DRIVER) && \

26
target/linux/ar71xx/patches-2.6.26/004-ar71xx_spi_controller.patch
View file

@ -1,26 +0,0 @@
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -52,6 +52,13 @@ config SPI_MASTER
comment "SPI Master Controller Drivers"
depends on SPI_MASTER
+config SPI_AR71XX
+ tristate "Atheros AR71xx SPI Controller"
+ depends on SPI_MASTER && ATHEROS_AR71XX
+ select SPI_BITBANG
+ help
+ This is the SPI contoller driver for Atheros AR71xx.
+
config SPI_ATMEL
tristate "Atmel SPI Controller"
depends on (ARCH_AT91 || AVR32) && SPI_MASTER
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -11,6 +11,7 @@ endif
obj-$(CONFIG_SPI_MASTER) += spi.o
# SPI master controller drivers (bus)
+obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o
obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o

21
target/linux/ar71xx/patches-2.6.26/005-ar71xx_mac_driver.patch
View file

@ -1,21 +0,0 @@
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2060,6 +2060,8 @@ config ACENIC_OMIT_TIGON_I
The safe and default value for this is N.
+source drivers/net/ag71xx/Kconfig
+
config DL2K
tristate "DL2000/TC902x-based Gigabit Ethernet support"
depends on PCI
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -2,6 +2,7 @@
# Makefile for the Linux network (ethercard) device drivers.
#
+obj-$(CONFIG_AG71XX) += ag71xx/
obj-$(CONFIG_E1000) += e1000/
obj-$(CONFIG_E1000E) += e1000e/
obj-$(CONFIG_IBM_EMAC) += ibm_emac/

26
target/linux/ar71xx/patches-2.6.26/006-ar71xx_wdt_driver.patch
View file

@ -1,26 +0,0 @@
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -683,6 +683,13 @@ config TXX9_WDT
help
Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+config AR71XX_WDT
+ tristate "Atheros AR71xx Watchdog Timer"
+ depends on ATHEROS_AR71XX
+ help
+ Hardware driver for the built-in watchdog timer on the Atheros
+ AR71xx SoCs.
+
# PARISC Architecture
# POWERPC Architecture
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -97,6 +97,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o
# PARISC Architecture

13
target/linux/ar71xx/patches-2.6.26/100-mtd_m25p80_add_pm25lv_flash_support.patch
View file

@ -1,13 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -455,6 +455,10 @@ static struct flash_info __devinitdata m
{ "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, },
{ "at26df321", 0x1f4701, 64 * 1024, 64, SECT_4K, },
+ /* PMC -- pm25x "blocks" are 32K, sectors are 4K */
+ { "pm25lv512", 0, 32 * 1024, 2, SECT_4K },
+ { "pm25lv010", 0, 32 * 1024, 4, SECT_4K },
+
/* Spansion -- single (large) sector size only, at least
* for the chips listed here (without boot sectors).
*/

23
target/linux/ar71xx/patches-2.6.26/101-ksz8041_phy_driver.patch
View file

@ -1,23 +0,0 @@
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -82,6 +82,11 @@ config MVSWITCH_PHY
---help---
Currently supports the Marvell 88E6060 switch.
+config MICREL_PHY
+ tristate "Drivers for Micrel/Kendin PHYs"
+ ---help---
+ Currently has a driver for the KSZ8041
+
config FIXED_PHY
bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
depends on PHYLIB=y
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -16,5 +16,6 @@ obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_ADM6996_PHY) += adm6996.o
obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
+obj-$(CONFIG_MICREL_PHY) += micrel.o
obj-$(CONFIG_FIXED_PHY) += fixed.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o

22
target/linux/ar71xx/patches-2.6.26/102-mtd_m25p80_add_myloader_parser.patch
View file

@ -1,22 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -645,12 +645,17 @@ static int __devinit m25p_probe(struct s
struct mtd_partition *parts = NULL;
int nr_parts = 0;
+ static const char *part_probes[] = {
#ifdef CONFIG_MTD_CMDLINE_PARTS
- static const char *part_probes[] = { "cmdlinepart", NULL, };
+ "cmdlinepart",
+#endif
+#ifdef CONFIG_MTD_MYLOADER_PARTS
+ "MyLoader",
+#endif
+ NULL, };
nr_parts = parse_mtd_partitions(&flash->mtd,
part_probes, &parts, 0);
-#endif
if (nr_parts <= 0 && data && data->parts) {
parts = data->parts;

12
target/linux/ar71xx/patches-2.6.26/103-mtd_m25p80_add_en25p32_support.patch
View file

@ -1,12 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -455,6 +455,9 @@ static struct flash_info __devinitdata m
{ "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, },
{ "at26df321", 0x1f4701, 64 * 1024, 64, SECT_4K, },
+ /* EON -- en25px */
+ { "en25p32", 0x1c2016, 64 * 1024, 64, },
+
/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
{ "pm25lv512", 0, 32 * 1024, 2, SECT_4K },
{ "pm25lv010", 0, 32 * 1024, 4, SECT_4K },

12
target/linux/ar71xx/patches-2.6.26/104-mtd_m25p80_add_redboot_parser.patch
View file

@ -1,12 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -655,6 +655,9 @@ static int __devinit m25p_probe(struct s
#ifdef CONFIG_MTD_MYLOADER_PARTS
"MyLoader",
#endif
+#ifdef CONFIG_MTD_REDBOOT_PARTS
+ "RedBoot",
+#endif
NULL, };
nr_parts = parse_mtd_partitions(&flash->mtd,

14
target/linux/ar71xx/patches-2.6.26/105-mtd_m25p80_add_mx25lxxx_support.patch
View file

@ -1,14 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -458,6 +458,11 @@ static struct flash_info __devinitdata m
/* EON -- en25px */
{ "en25p32", 0x1c2016, 64 * 1024, 64, },
+ /* Macronix -- mx25lxxx */
+ { "mx25l32", 0xc22016, 64 * 1024, 64, },
+ { "mx25l64", 0xc22017, 64 * 1024, 128, },
+ { "mx25l128", 0xc22018, 64 * 1024, 256, },
+
/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
{ "pm25lv512", 0, 32 * 1024, 2, SECT_4K },
{ "pm25lv010", 0, 32 * 1024, 4, SECT_4K },

54
target/linux/ar71xx/patches-2.6.26/140-redboot_partition_scan.patch
View file

@ -1,54 +0,0 @@
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -62,31 +62,32 @@ static int parse_redboot_partitions(stru
static char nullstring[] = "unallocated";
#endif
+ buf = vmalloc(master->erasesize);
+ if (!buf)
+ return -ENOMEM;
+
+ restart:
if ( directory < 0 ) {
offset = master->size + directory * master->erasesize;
- while (master->block_isbad &&
+ while (master->block_isbad &&
master->block_isbad(master, offset)) {
if (!offset) {
nogood:
printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
+ vfree(buf);
return -EIO;
}
offset -= master->erasesize;
}
} else {
offset = directory * master->erasesize;
- while (master->block_isbad &&
+ while (master->block_isbad &&
master->block_isbad(master, offset)) {
offset += master->erasesize;
if (offset == master->size)
goto nogood;
}
}
- buf = vmalloc(master->erasesize);
-
- if (!buf)
- return -ENOMEM;
-
printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
master->name, offset);
@@ -158,6 +159,11 @@ static int parse_redboot_partitions(stru
}
if (i == numslots) {
/* Didn't find it */
+ if (offset + master->erasesize < master->size) {
+ /* not at the end of the flash yet, maybe next block :) */
+ directory++;
+ goto restart;
+ }
printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
master->name);
ret = 0;

21
target/linux/ar71xx/patches-2.6.26/200-rb4xx_nand_driver.patch
View file

@ -1,21 +0,0 @@
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -386,4 +386,8 @@ config MTD_NAND_FSL_UPM
Enables support for NAND Flash chips wired onto Freescale PowerPC
processor localbus with User-Programmable Machine support.
+config MTD_NAND_RB4XX
+ tristate "NAND flash driver for RouterBoard 4xx series"
+ depends on MTD_NAND && ATHEROS_AR71XX
+
endif # MTD_NAND
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27
obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
obj-$(CONFIG_MTD_ALAUDA) += alauda.o
obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o

22
target/linux/ar71xx/patches-2.6.26/300-mips_fw_myloader.patch
View file

@ -1,22 +0,0 @@
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -158,6 +158,7 @@ endif
#
libs-$(CONFIG_ARC) += arch/mips/fw/arc/
libs-$(CONFIG_CFE) += arch/mips/fw/cfe/
+libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/
libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/
libs-y += arch/mips/fw/lib/
libs-$(CONFIG_SIBYTE_CFE) += arch/mips/sibyte/cfe/
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -874,6 +874,9 @@ config MIPS_NILE4
config MIPS_DISABLE_OBSOLETE_IDE
bool
+config MYLOADER
+ bool
+
config SYNC_R4K
bool

10
target/linux/ar71xx/patches-2.6.26/301-enable_prom_emulator.patch
View file

@ -1,10 +0,0 @@
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -36,6 +36,7 @@ config ATHEROS_AR71XX
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_HAS_EARLY_PRINTK
select MIPS_MACHINE
+ select PROM_EMU
help
Support for Atheros AR71xx based boards.

29
target/linux/ar71xx/patches-2.6.26/901-get_c0_compare_irq_function.patch
View file

@ -1,29 +0,0 @@
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -43,6 +43,7 @@
#include <asm/mmu_context.h>
#include <asm/types.h>
#include <asm/stacktrace.h>
+#include <asm/time.h>
extern asmlinkage void handle_int(void);
extern asmlinkage void handle_tlbm(void);
@@ -1464,6 +1465,8 @@ void __cpuinit per_cpu_trap_init(void)
*/
if (cpu_has_mips_r2) {
cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
+ if (get_c0_compare_irq)
+ cp0_compare_irq = get_c0_compare_irq();
cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
if (cp0_perfcount_irq == cp0_compare_irq)
cp0_perfcount_irq = -1;
--- a/include/asm-mips/time.h
+++ b/include/asm-mips/time.h
@@ -53,6 +53,7 @@ extern int (*perf_irq)(void);
#ifdef CONFIG_CEVT_R4K
extern int mips_clockevent_init(void);
extern unsigned int __weak get_c0_compare_int(void);
+extern unsigned int __weak get_c0_compare_irq(void);
#else
static inline int mips_clockevent_init(void)
{

65
target/linux/ar71xx/patches-2.6.26/902-mips_clocksource_init_war.patch
View file

@ -1,65 +0,0 @@
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -13,6 +13,22 @@
#include <asm/smtc_ipi.h>
#include <asm/time.h>
+/*
+ * Compare interrupt can be routed and latched outside the core,
+ * so a single execution hazard barrier may not be enough to give
+ * it time to clear as seen in the Cause register. 4 time the
+ * pipeline depth seems reasonably conservative, and empirically
+ * works better in configurations with high CPU/bus clock ratios.
+ */
+
+#define compare_change_hazard() \
+ do { \
+ irq_disable_hazard(); \
+ irq_disable_hazard(); \
+ irq_disable_hazard(); \
+ irq_disable_hazard(); \
+ } while (0)
+
static int mips_next_event(unsigned long delta,
struct clock_event_device *evt)
{
@@ -28,6 +44,7 @@ static int mips_next_event(unsigned long
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
+ compare_change_hazard();
res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
#ifdef CONFIG_MIPS_MT_SMTC
evpe(vpflags);
@@ -187,7 +204,7 @@ static int c0_compare_int_usable(void)
*/
if (c0_compare_int_pending()) {
write_c0_compare(read_c0_count());
- irq_disable_hazard();
+ compare_change_hazard();
if (c0_compare_int_pending())
return 0;
}
@@ -196,7 +213,7 @@ static int c0_compare_int_usable(void)
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
- irq_disable_hazard();
+ compare_change_hazard();
if ((int)(read_c0_count() - cnt) < 0)
break;
/* increase delta if the timer was already expired */
@@ -205,11 +222,12 @@ static int c0_compare_int_usable(void)
while ((int)(read_c0_count() - cnt) <= 0)
; /* Wait for expiry */
+ compare_change_hazard();
if (!c0_compare_int_pending())
return 0;
write_c0_compare(read_c0_count());
- irq_disable_hazard();
+ compare_change_hazard();
if (c0_compare_int_pending())
return 0;