ramips: add support for Youku YK1

Changes since V1:
I resend this patch for current trunk.The former V1 patch is for CC branch.

Signed-off-by: Shonn Lu <countrysideboy@qq.com>

SVN-Revision: 47617
This commit is contained in:
John Crispin 2015-11-24 18:29:02 +00:00
parent 12b6f4cf71
commit e9baf8265b
6 changed files with 141 additions and 2 deletions

View file

@ -268,6 +268,11 @@ zbt-wr8305rt)
zte-q7)
set_wifi_led "$board:blue:status"
;;
youku-yk1)
ucidef_set_led_default "power" "power" "$board:blue:power" "1"
set_wifi_led "$board:blue:air"
set_usb_led "$board:blue:usb"
;;
esac
board_config_flush

View file

@ -84,7 +84,8 @@ ramips_setup_interfaces()
wsr-600|\
wt1520|\
y1|\
zbt-wg2626)
zbt-wg2626|\
youku-yk1)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t"

View file

@ -460,6 +460,9 @@ ramips_board_detect() {
*"ZBT-WR8305RT")
name="zbt-wr8305rt"
;;
*"YK1")
name="youku-yk1"
;;
*)
name="generic"
;;

View file

@ -134,7 +134,8 @@ platform_check_image() {
zbt-wa05|\
zbt-wg2626|\
zbt-wr8305rt|\
zte-q7)
zte-q7|\
youku-yk1)
[ "$magic" != "27051956" ] && {
echo "Invalid image type."
return 1

View file

@ -0,0 +1,127 @@
/dts-v1/;
/include/ "mt7620a.dtsi"
/ {
compatible = "YOUKU-YK1", "ralink,mt7620a-soc";
model = "YOUKU YK1";
palmbus@10000000 {
gpio0: gpio@600 {
status = "okay";
};
gpio1: gpio@638 {
status = "okay";
};
gpio2: gpio@660 {
status = "okay";
};
gpio3: gpio@688 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25q256";
reg = <0 0>;
linux,modalias = "m25p80", "w25q256";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x1fb0000>;
};
};
};
};
pinctrl {
state_default: pinctrl0 {
default {
ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
ralink,function = "gpio";
};
};
};
ethernet@10100000 {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&factory 0x4>;
ralink,port-map = "llllw";
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
};
sdhci@b0130000 {
status = "okay";
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
gpio-leds {
compatible = "gpio-leds";
wan {
label = "youku-yk1:blue:wan";
gpios = <&gpio2 4 1>;
};
air {
label = "youku-yk1:blue:air";
gpios = <&gpio3 0 1>;
};
usb {
label = "youku-yk1:blue:usb";
gpios = <&gpio1 11 1>;
};
power {
label = "youku-yk1:blue:power";
gpios = <&gpio1 5 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x198>;
};
};
};

View file

@ -900,6 +900,7 @@ Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WR
Image/Build/Profile/WT3020=$(call BuildFirmware/PorayDualSize/$(1),$(1),wt3020,WT3020)
Image/Build/Profile/MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1),miwifi-mini,MIWIFI-MINI)
Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7)
Image/Build/Profile/YOUKU-YK1=$(call BuildFirmware/Default16M/$(1),$(1),youku-yk1,YOUKU-YK1)
Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
Image/Build/Profile/ZBT-WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wr8305rt,ZBT-WR8305RT)
Image/Build/Profile/ArcherC20i=$(call BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i)
@ -939,6 +940,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/WT3020,$(1))
$(call Image/Build/Profile/MIWIFI-MINI,$(1))
$(call Image/Build/Profile/ZTE-Q7,$(1))
$(call Image/Build/Profile/YOUKU-YK1,$(1))
$(call Image/Build/Profile/ZBT-WA05,$(1))
$(call Image/Build/Profile/ZBT-WR8305RT,$(1))
$(call Image/Build/Profile/ArcherC20i,$(1))