ipq806x: clean up dts files

Set the pinmux to the values found in the GPL tarballs of the boards.
Remove pinmux which are is not used (like nand pinmux for spi
flash boards).

This allows to use the wan orange led of the C2600 which had a wrong
pinmux before. Might fix buttons or leds of other boards as well.

Fix the LED color and the ledswitch key code of the C2600. Rename the
ledgnr to ledswitch.

Add support for indication the boot state using LEDs to the D7800,
NBG6817, R7500 and R7500v2.

Change GPIO active to readable values in D7800, EA8500, R7500,
R7500v2 and R7800.

Change gpioexport to gpio pinmux.

Add proper "drive strenght" to i2c4_pins and use it for RPM on
C2600, D7800, EA8500, R7500, R7500v2.

Remove pcie pinmux from D7800.

Move pinctrl to correct place in NBG6817 and R7800.

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
This commit is contained in:
Henryk Heisig 2016-11-21 21:04:52 +01:00 committed by Mathias Kresin
parent 97eff5cba5
commit e3caadc69d
9 changed files with 536 additions and 287 deletions

View file

@ -16,7 +16,7 @@ c2600)
ucidef_set_led_usbport "usb2" "USB 2" "${board}:white:usb_4" "usb3-port1" "usb4-port1"
ucidef_set_led_switch "wan" "wan" "${board}:white:wan" "switch0" "0x20"
ucidef_set_led_switch "lan" "lan" "${board}:white:lan" "switch0" "0x1e"
ucidef_set_led_default "general" "general" "${board}:white:ledgnr" "1"
ucidef_set_led_default "general" "general" "${board}:white:general" "1"
;;
d7800 |\
r7500 |\

View file

@ -1,4 +1,5 @@
#include "qcom-ipq8064-v1.0.dtsi"
#include <dt-bindings/input/input.h>
/ {
@ -25,9 +26,9 @@
mdio-gpio0 = &mdio0;
led-boot = &power;
led-failsafe = &ledgnr;
led-failsafe = &general;
led-running = &power;
led-upgrade = &ledgnr;
led-upgrade = &general;
};
chosen {
@ -36,10 +37,32 @@
soc {
pinmux@800000 {
button_pins: button_pins {
mux {
pins = "gpio16", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
pins = "gpio12", "gpio13";
function = "gsbi4";
bias-disable;
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33",
"gpio53", "gpio66";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
spi_pins: spi_pins {
@ -56,6 +79,7 @@
cs {
pins = "gpio20";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
};
@ -66,31 +90,6 @@
};
};
nand_pins: nand_pins {
mux {
pins = "gpio34", "gpio35", "gpio36",
"gpio37", "gpio38", "gpio39",
"gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
function = "nand";
drive-strength = <10>;
bias-disable;
};
pullups {
pins = "gpio39";
bias-pull-up;
};
hold {
pins = "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
bias-bus-hold;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
@ -109,6 +108,26 @@
bias-disable;
};
};
usb0_pwr_en_pin: usb0_pwr_en_pin {
mux {
pins = "gpio25";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
output-high;
};
};
usb1_pwr_en_pin: usb1_pwr_en_pin {
mux {
pins = "gpio23";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
output-high;
};
};
};
gsbi@16300000 {
@ -314,10 +333,16 @@
usb30@0 {
status = "ok";
pinctrl-0 = <&usb0_pwr_en_pin>;
pinctrl-names = "default";
};
usb30@1 {
status = "ok";
pinctrl-0 = <&usb1_pwr_en_pin>;
pinctrl-names = "default";
};
pcie0: pci@1b500000 {
@ -387,10 +412,17 @@
full-duplex;
};
};
rpm@108000 {
pinctrl-0 = <&i2c4_pins>;
pinctrl-names = "default";
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
@ -410,15 +442,17 @@
linux,code = <KEY_WPS_BUTTON>;
};
ledgeneral {
label = "ledgeneral";
ledswitch {
label = "ledswitch";
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_DOLLAR>;
linux,code = <KEY_LIGHTS_TOGGLE>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
lan {
label = "c2600:white:lan";
@ -441,7 +475,7 @@
};
wan_red {
label = "c2600:red:wan";
label = "c2600:orange:wan";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
};
@ -453,29 +487,14 @@
power: status {
label = "c2600:white:status";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
ledgnr: ledgnr {
label = "c2600:white:ledgnr";
general: general {
label = "c2600:white:general";
gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
usb1_power {
gpio-export,name = "usb1_power";
gpio-export,output = <1>;
gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
};
usb2_power {
gpio-export,name = "usb2_power";
gpio-export,output = <1>;
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
};
};
&adm_dma {

View file

@ -24,6 +24,11 @@
aliases {
serial0 = &uart4;
mdio-gpio0 = &mdio0;
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
chosen {
@ -33,26 +38,39 @@
soc {
pinmux@800000 {
i2c4_pins: i2c4_pinmux {
pins = "gpio12", "gpio13";
function = "gsbi4";
bias-disable;
button_pins: button_pins {
mux {
pins = "gpio6", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
pcie0_pins: pcie0_pinmux {
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio3";
function = "pcie1_rst";
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
pcie1_pins: pcie1_pinmux {
led_pins: led_pins {
mux {
pins = "gpio48";
function = "pcie2_rst";
drive-strength = <12>;
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
"gpio24","gpio26", "gpio53", "gpio64", "gpio67";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
@ -80,15 +98,6 @@
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
@ -98,6 +107,26 @@
bias-disable;
};
};
usb0_pwr_en_pins: usb0_pwr_en_pins {
mux {
pins = "gpio15";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
usb1_pwr_en_pins: usb1_pwr_en_pins {
mux {
pins = "gpio16", "gpio68";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
};
gsbi@16300000 {
@ -140,22 +169,28 @@
usb30@0 {
status = "ok";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
usb30@1 {
status = "ok";
pinctrl-0 = <&usb1_pwr_en_pins>;
pinctrl-names = "default";
};
pcie0: pci@1b500000 {
status = "ok";
reset-gpio = <&qcom_pinmux 3 0>;
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&pcie0_pins>;
pinctrl-names = "default";
};
pcie1: pci@1b700000 {
status = "ok";
reset-gpio = <&qcom_pinmux 48 0>;
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
};
@ -228,14 +263,13 @@
label = "firmware";
reg = <0x1480000 0x2000000>;
};
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
@ -283,82 +317,91 @@
full-duplex;
};
};
rpm@108000 {
pinctrl-0 = <&i2c4_pins>;
pinctrl-names = "default";
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 6 1>;
linux,code = <KEY_WLAN>;
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 1>;
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 1>;
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
usb1 {
label = "d7800:amber:usb1";
gpios = <&qcom_pinmux 7 0>;
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb3 {
label = "d7800:amber:usb3";
gpios = <&qcom_pinmux 8 0>;
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
status {
label = "d7800:amber:status";
gpios = <&qcom_pinmux 9 0>;
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
internet {
label = "d7800:white:internet";
gpios = <&qcom_pinmux 22 0>;
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
wan {
label = "d7800:white:wan";
gpios = <&qcom_pinmux 23 0>;
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
wps {
label = "d7800:white:wps";
gpios = <&qcom_pinmux 24 0>;
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
esata {
label = "d7800:white:esata";
gpios = <&qcom_pinmux 26 0>;
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
power {
power: power {
label = "d7800:white:power";
gpios = <&qcom_pinmux 53 0>;
default-state = "on";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
rfkill {
label = "d7800:white:rfkill";
gpios = <&qcom_pinmux 64 0>;
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
wifi5g {
label = "d7800:white:wifi5g";
gpios = <&qcom_pinmux 67 0>;
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_HIGH>;
};
};
};

View file

@ -39,20 +39,42 @@
soc {
pinmux@800000 {
i2c4_pins: i2c4_pinmux {
pins = "gpio12", "gpio13";
function = "gsbi4";
bias-disable;
};
spi_pins: spi_pins {
button_pins: button_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
drive-strength = <10>;
bias-none;
pins = "gpio65", "gpio67", "gpio68";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio6", "gpio53", "gpio54";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
nand_pins: nand_pins {
mux {
pins = "gpio34", "gpio35", "gpio36",
@ -76,15 +98,6 @@
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
@ -94,9 +107,6 @@
bias-disable;
};
};
};
gsbi@16300000 {
@ -271,14 +281,13 @@
label = "syscfg";
reg = <0x5f80000 0x2080000>;
};
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
@ -332,17 +341,23 @@
};
};
rpm@108000 {
pinctrl-0 = <&i2c4_pins>;
pinctrl-names = "default";
};
adm_dma: dma@18300000 {
status = "ok";
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
rfkill {
label = "rfkill"; /* WIFI on-off*/
wifi {
label = "wifi";
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
@ -358,29 +373,27 @@
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
wps {
label = "ea8500:green:wps";
gpios = <&qcom_pinmux 53 0>;
default-state = "off";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
};
power: power {
label = "ea8500:white:power";
gpios = <&qcom_pinmux 6 1>;
default-state = "off";
linux,default-trigger = "heartbeat";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
wifi {
label = "ea8500:green:wifi";
gpios = <&qcom_pinmux 54 0>;
default-state = "off";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
};
};
};

View file

@ -24,6 +24,11 @@
aliases {
serial0 = &uart4;
mdio-gpio0 = &mdio0;
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
chosen {
@ -33,10 +38,41 @@
soc {
pinmux@800000 {
button_pins: button_pins {
mux {
pins = "gpio6", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
pins = "gpio12", "gpio13";
function = "gsbi4";
bias-disable;
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
"gpio24","gpio26", "gpio53", "gpio64", "gpio67";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
nand_pins: nand_pins {
@ -62,15 +98,6 @@
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
@ -205,7 +232,7 @@
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
@ -257,82 +284,91 @@
full-duplex;
};
};
rpm@108000 {
pinctrl-0 = <&i2c4_pins>;
pinctrl-names = "default";
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 6 1>;
linux,code = <KEY_WLAN>;
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 1>;
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 1>;
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
usb1 {
label = "r7500:amber:usb1";
gpios = <&qcom_pinmux 7 0>;
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb3 {
label = "r7500:amber:usb3";
gpios = <&qcom_pinmux 8 0>;
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
status {
label = "r7500:amber:status";
gpios = <&qcom_pinmux 9 0>;
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
internet {
label = "r7500:white:internet";
gpios = <&qcom_pinmux 22 0>;
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
wan {
label = "r7500:white:wan";
gpios = <&qcom_pinmux 23 0>;
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
wps {
label = "r7500:white:wps";
gpios = <&qcom_pinmux 24 0>;
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
esata {
label = "r7500:white:esata";
gpios = <&qcom_pinmux 26 0>;
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
power {
power: power {
label = "r7500:white:power";
gpios = <&qcom_pinmux 53 0>;
default-state = "on";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
rfkill {
label = "r7500:white:rfkill";
gpios = <&qcom_pinmux 64 0>;
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
wifi5g {
label = "r7500:white:wifi5g";
gpios = <&qcom_pinmux 67 0>;
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_HIGH>;
};
};
};

View file

@ -29,6 +29,11 @@
aliases {
serial0 = &uart4;
mdio-gpio0 = &mdio0;
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
chosen {
@ -38,10 +43,41 @@
soc {
pinmux@800000 {
button_pins: button_pins {
mux {
pins = "gpio6", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
pins = "gpio12", "gpio13";
function = "gsbi4";
bias-disable;
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
"gpio24","gpio26", "gpio53", "gpio64";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
nand_pins: nand_pins {
@ -67,15 +103,6 @@
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
@ -85,6 +112,26 @@
bias-disable;
};
};
usb0_pwr_en_pins: usb0_pwr_en_pins {
mux {
pins = "gpio15";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
usb1_pwr_en_pins: usb1_pwr_en_pins {
mux {
pins = "gpio16", "gpio68";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
};
gsbi@16300000 {
@ -127,10 +174,16 @@
usb30@0 {
status = "ok";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
usb30@1 {
status = "ok";
pinctrl-0 = <&usb1_pwr_en_pins>;
pinctrl-names = "default";
};
pcie0: pci@1b500000 {
@ -222,7 +275,7 @@
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
@ -274,79 +327,87 @@
full-duplex;
};
};
rpm@108000 {
pinctrl-0 = <&i2c4_pins>;
pinctrl-names = "default";
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 6 1>;
linux,code = <KEY_WLAN>;
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 1>;
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 1>;
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
usb1 {
label = "r7500v2:amber:usb1";
gpios = <&qcom_pinmux 7 0>;
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb3 {
label = "r7500v2:amber:usb3";
gpios = <&qcom_pinmux 8 0>;
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
status {
label = "r7500v2:amber:status";
gpios = <&qcom_pinmux 9 0>;
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
internet {
label = "r7500v2:white:internet";
gpios = <&qcom_pinmux 22 0>;
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
wan {
label = "r7500v2:white:wan";
gpios = <&qcom_pinmux 23 0>;
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
wps {
label = "r7500v2:white:wps";
gpios = <&qcom_pinmux 24 0>;
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
esata {
label = "r7500v2:white:esata";
gpios = <&qcom_pinmux 26 0>;
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
power {
power: power {
label = "r7500v2:white:power";
gpios = <&qcom_pinmux 53 0>;
default-state = "on";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
rfkill {
label = "r7500v2:white:rfkill";
gpios = <&qcom_pinmux 64 0>;
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
};
};

View file

@ -38,11 +38,13 @@
soc {
pinmux@800000 {
led_pins: led_pins {
pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
"gpio26", "gpio53", "gpio56", "gpio66";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
"gpio26", "gpio53", "gpio56", "gpio66";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
@ -55,10 +57,12 @@
};
button_pins: button_pins {
pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
mux {
pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
spi_pins: spi_pins {
@ -103,7 +107,6 @@
bias-disable;
};
};
};
gsbi@16300000 {
@ -227,7 +230,6 @@
reg = <0xfc0000 0x40000>;
read-only;
};
};
};
};

View file

@ -25,6 +25,11 @@
serial0 = &uart4;
mdio-gpio0 = &mdio0;
sdcc1 = &sdcc1;
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
chosen {
@ -34,8 +39,14 @@
soc {
pinmux@800000 {
pinctrl-0 = <&mdio0_pins &rgmii2_pins>;
pinctrl-names = "default";
button_pins: button_pins {
mux {
pins = "gpio6", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
@ -46,6 +57,22 @@
};
};
led_pins: led_pins {
off {
pins = "gpio26", "gpio33", "gpio64";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
on {
pins = "gpio9";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
@ -88,6 +115,42 @@
drive-strength = <12>;
};
};
usb0_pwr_en_pins: usb0_pwr_en_pins {
pwr {
pins = "gpio14";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
ovc {
pins = "gpio15";
function = "gpio";
drive-strength = <12>;
bias-pull-up;
output-high;
};
};
usb1_pwr_en_pins: usb1_pwr_en_pins {
pwr {
pins = "gpio17";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
ovc {
pins = "gpio16";
function = "gpio";
drive-strength = <12>;
bias-pull-up;
output-high;
};
};
};
gsbi@16300000 {
@ -146,10 +209,16 @@
usb30@0 {
status = "ok";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
usb30@1 {
status = "ok";
pinctrl-0 = <&usb1_pwr_en_pins>;
pinctrl-names = "default";
};
pcie0: pci@1b500000 {
@ -170,7 +239,9 @@
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_LOW &qcom_pinmux 0 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
device_type = "ethernet-phy";
@ -222,6 +293,9 @@
qcom,irq = <255>;
mdiobus = <&mdio0>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
fixed-link {
speed = <1000>;
full-duplex;
@ -253,18 +327,18 @@
amba {
sdcc1: sdcc@12400000 {
status = "okay";
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
dma-names = "tx", "rx";
status = "okay";
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
dma-names = "tx", "rx";
};
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
@ -286,15 +360,17 @@
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
internet {
label = "nbg6817:white:internet";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
power {
power: power {
label = "nbg6817:white:power";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
wifi {
@ -307,33 +383,6 @@
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
usb0_status {
gpio-export,name = "usb0";
gpio-export,output = <1>;
gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
};
usb1_status {
gpio-export,name = "usb1";
gpio-export,output = <1>;
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
};
usb1_power {
gpio-export,name = "usb1_power";
gpio-export,output = <1>;
gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
};
usb2_power {
gpio-export,name = "usb2_power";
gpio-export,output = <1>;
gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
};
};
};
&adm_dma {

View file

@ -42,8 +42,14 @@
soc {
pinmux@800000 {
pinctrl-0 = <&mdio0_pins &rgmii2_pins>;
pinctrl-names = "default";
button_pins: button_pins {
mux {
pins = "gpio6", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
@ -54,6 +60,14 @@
};
};
led_pins: led_pins {
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
"gpio24","gpio26", "gpio53", "gpio64", "gpio67";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
nand_pins: nand_pins {
mux {
pins = "gpio34", "gpio35", "gpio36",
@ -165,6 +179,26 @@
output-high;
};
};
usb0_pwr_en_pins: usb0_pwr_en_pins {
mux {
pins = "gpio15";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
usb1_pwr_en_pins: usb1_pwr_en_pins {
mux {
pins = "gpio16", "gpio68";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
};
gsbi@16300000 {
@ -191,7 +225,7 @@
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 0>;
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash: m25p80@0 {
compatible = "jedec,spi-nor";
@ -214,7 +248,7 @@
pinctrl-0 = <&spi6_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 57 0>;
cs-gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
spi-nor@0 {
compatible = "spi-nor";
@ -251,10 +285,16 @@
usb30@0 {
status = "ok";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
usb30@1 {
status = "ok";
pinctrl-0 = <&usb1_pwr_en_pins>;
pinctrl-names = "default";
};
pcie0: pci@1b500000 {
@ -336,14 +376,16 @@
label = "firmware";
reg = <0x1480000 0x2000000>;
};
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
device_type = "ethernet-phy";
@ -399,6 +441,9 @@
qcom,irq = <255>;
mdiobus = <&mdio0>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mtd-mac-address = <&art 6>;
fixed-link {
@ -435,10 +480,12 @@
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 6 1>;
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
debounce-interval = <60>;
wakeup-source;
@ -446,7 +493,7 @@
reset {
label = "reset";
gpios = <&qcom_pinmux 54 1>;
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
@ -454,7 +501,7 @@
wps {
label = "wps";
gpios = <&qcom_pinmux 65 1>;
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
wakeup-source;
@ -463,79 +510,58 @@
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
power_white: power_white {
label = "r7800:white:power";
gpios = <&qcom_pinmux 53 0>;
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
power_amber: power_amber {
label = "r7800:amber:power";
gpios = <&qcom_pinmux 9 0>;
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
wan_white {
label = "r7800:white:wan";
gpios = <&qcom_pinmux 22 0>;
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
wan_amber {
label = "r7800:amber:wan";
gpios = <&qcom_pinmux 23 0>;
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
usb1 {
label = "r7800:white:usb1";
gpios = <&qcom_pinmux 7 0>;
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb2 {
label = "r7800:white:usb2";
gpios = <&qcom_pinmux 8 0>;
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
esata {
label = "r7800:white:esata";
gpios = <&qcom_pinmux 26 0>;
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
rfkill {
label = "r7800:white:rfkill";
gpios = <&qcom_pinmux 64 0>;
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
wps {
label = "r7800:white:wps";
gpios = <&qcom_pinmux 24 0>;
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
wifi {
label = "r7800:white:wifi";
gpios = <&qcom_pinmux 67 0>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
usb1-power {
gpio-export,name = "usb1";
gpio-export,output = <1>;
gpios = <&qcom_pinmux 15 0>;
};
usb2-power {
gpio-export,name = "usb2";
gpio-export,output = <1>;
gpios = <&qcom_pinmux 16 0>;
};
usb-power {
gpio-export,name = "usb_p";
gpio-export,output = <1>;
gpios = <&qcom_pinmux 68 0>;
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_HIGH>;
};
};
};