load the mac address from flash where it is possible

SVN-Revision: 12357
This commit is contained in:
Gabor Juhos 2008-08-20 17:20:58 +00:00
parent 6922a3692d
commit d9b755b3dc
19 changed files with 198 additions and 31 deletions

View file

@ -11,9 +11,14 @@
#include "cellvision.h" #include "cellvision.h"
#include <prom/admboot.h>
#define CELLVISION_GPIO_FLASH_A20 ADM5120_GPIO_PIN5 #define CELLVISION_GPIO_FLASH_A20 ADM5120_GPIO_PIN5
#define CELLVISION_GPIO_DEV_MASK (1 << CELLVISION_GPIO_FLASH_A20) #define CELLVISION_GPIO_DEV_MASK (1 << CELLVISION_GPIO_FLASH_A20)
#define CELLVISION_CONFIG_OFFSET 0x8000
#define CELLVISION_CONFIG_SIZE 0x1000
#ifdef CONFIG_MTD_PARTITIONS #ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition cas6xx_partitions[] = { static struct mtd_partition cas6xx_partitions[] = {
{ {
@ -84,6 +89,20 @@ static void __init cellvision_flash_setup(void)
adm5120_add_device_flash(0); adm5120_add_device_flash(0);
} }
void __init cellvision_mac_setup(void)
{
u8 mac_base[6];
int err;
err = admboot_get_mac_base(CELLVISION_CONFIG_OFFSET,
CELLVISION_CONFIG_SIZE, mac_base);
if ((err) || !is_valid_ether_addr(mac_base))
random_ether_addr(mac_base);
adm5120_setup_eth_macs(mac_base);
}
void __init cas6xx_flash_setup(void) void __init cas6xx_flash_setup(void)
{ {
#ifdef CONFIG_MTD_PARTITIONS #ifdef CONFIG_MTD_PARTITIONS
@ -118,6 +137,8 @@ ADM5120_BOARD(MACH_ADM5120_CAS670, "Cellvision CAS-670/670W", cas6xx_setup);
void __init cas7xx_setup(void) void __init cas7xx_setup(void)
{ {
cas7xx_flash_setup(); cas7xx_flash_setup();
cellvision_mac_setup();
adm5120_add_device_switch(1, NULL); adm5120_add_device_switch(1, NULL);
} }

View file

@ -12,6 +12,7 @@
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/etherdevice.h>
#include <asm/bootinfo.h> #include <asm/bootinfo.h>
@ -20,6 +21,8 @@
#include <asm/mach-adm5120/adm5120_platform.h> #include <asm/mach-adm5120/adm5120_platform.h>
#include <asm/mach-adm5120/adm5120_irq.h> #include <asm/mach-adm5120/adm5120_irq.h>
extern void cellvision_mac_setup(void) __init;
extern void cas6xx_flash_setup(void) __init; extern void cas6xx_flash_setup(void) __init;
extern void cas7xx_flash_setup(void) __init; extern void cas7xx_flash_setup(void) __init;
extern void cas6xx_setup(void) __init; extern void cas6xx_setup(void) __init;

View file

@ -18,6 +18,8 @@ static u8 nfs101_vlans[6] __initdata = { /* TODO: not tested */
static void __init nfs101_setup(void) static void __init nfs101_setup(void)
{ {
cas6xx_flash_setup(); cas6xx_flash_setup();
cellvision_mac_setup();
adm5120_add_device_switch(5, nfs101_vlans); adm5120_add_device_switch(5, nfs101_vlans);
} }

View file

@ -50,6 +50,26 @@ unsigned char adm5120_eth_vlans[6] = {
EXPORT_SYMBOL_GPL(adm5120_eth_vlans); EXPORT_SYMBOL_GPL(adm5120_eth_vlans);
#endif #endif
void __init adm5120_setup_eth_macs(u8 *mac_base)
{
u32 t;
int i, j;
t = ((u32) mac_base[3] << 16) | ((u32) mac_base[4] << 8)
| ((u32) mac_base[5]);
for (i = 0; i < ARRAY_SIZE(adm5120_eth_macs); i++) {
for (j = 0; j < 3; j++)
adm5120_eth_macs[i][j] = mac_base[j];
adm5120_eth_macs[i][3] = (t >> 16) & 0xff;
adm5120_eth_macs[i][4] = (t >> 8) & 0xff;
adm5120_eth_macs[i][5] = t & 0xff;
t++;
}
}
/* /*
* Built-in ethernet switch * Built-in ethernet switch
*/ */

View file

@ -9,21 +9,10 @@
* *
*/ */
#include <linux/kernel.h> #include "compex.h"
#include <linux/init.h>
#include <linux/gpio.h>
#include <asm/bootinfo.h>
#include <asm/mach-adm5120/adm5120_info.h>
#include <asm/mach-adm5120/adm5120_board.h>
#include <asm/mach-adm5120/adm5120_platform.h>
#include <asm/mach-adm5120/adm5120_irq.h>
#include <asm/mach-adm5120/prom/myloader.h> #include <asm/mach-adm5120/prom/myloader.h>
#include "compex.h"
#define COMPEX_GPIO_DEV_MASK (1 << ADM5120_GPIO_PIN5) #define COMPEX_GPIO_DEV_MASK (1 << ADM5120_GPIO_PIN5)
static void switch_bank_gpio5(unsigned bank) static void switch_bank_gpio5(unsigned bank)
@ -40,14 +29,22 @@ static void switch_bank_gpio5(unsigned bank)
void __init compex_mac_setup(void) void __init compex_mac_setup(void)
{ {
int i, j; if (myloader_present()) {
int i;
if (!myloader_present()) for (i = 0; i < 6; i++) {
return; if (is_valid_ether_addr(myloader_info.macs[i]))
memcpy(myloader_info.macs[i],
adm5120_eth_macs[i], ETH_ALEN);
else
random_ether_addr(adm5120_eth_macs[i]);
}
} else {
u8 mac[ETH_ALEN];
for (i = 0; i < 6; i++) random_ether_addr(mac);
for (j = 0; j < 6; j++) adm5120_setup_eth_macs(mac);
adm5120_eth_macs[i][j] = myloader_info.macs[i][j]; }
} }
void __init compex_generic_setup(void) void __init compex_generic_setup(void)

View file

@ -11,9 +11,10 @@
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/gpio.h>
#include <linux/etherdevice.h>
#include <asm/bootinfo.h> #include <asm/bootinfo.h>
#include <linux/gpio.h>
#include <asm/mach-adm5120/adm5120_info.h> #include <asm/mach-adm5120/adm5120_info.h>
#include <asm/mach-adm5120/adm5120_board.h> #include <asm/mach-adm5120/adm5120_board.h>

View file

@ -11,8 +11,13 @@
#include "br-61xx.h" #include "br-61xx.h"
#include <prom/admboot.h>
#define BR61XX_GPIO_DEV_MASK 0 #define BR61XX_GPIO_DEV_MASK 0
#define BR61XX_CONFIG_OFFSET 0x8000
#define BR61XX_CONFIG_SIZE 0x1000
#ifdef CONFIG_MTD_PARTITIONS #ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition br61xx_partitions[] = { static struct mtd_partition br61xx_partitions[] = {
{ {
@ -46,6 +51,20 @@ static u8 br61xx_vlans[6] __initdata = {
0x41, 0x42, 0x44, 0x48, 0x50, 0x00 0x41, 0x42, 0x44, 0x48, 0x50, 0x00
}; };
static void __init br61xx_mac_setup(void)
{
u8 mac_base[6];
int err;
err = admboot_get_mac_base(BR61XX_CONFIG_OFFSET,
BR61XX_CONFIG_SIZE, mac_base);
if ((err) || !is_valid_ether_addr(mac_base))
random_ether_addr(mac_base);
adm5120_setup_eth_macs(mac_base);
}
void __init br61xx_generic_setup(void) void __init br61xx_generic_setup(void)
{ {
@ -56,9 +75,10 @@ void __init br61xx_generic_setup(void)
adm5120_add_device_flash(0); adm5120_add_device_flash(0);
adm5120_add_device_gpio(BR61XX_GPIO_DEV_MASK); adm5120_add_device_gpio(BR61XX_GPIO_DEV_MASK);
adm5120_add_device_switch(5, br61xx_vlans); adm5120_add_device_switch(5, br61xx_vlans);
adm5120_add_device_gpio_buttons(ARRAY_SIZE(br61xx_gpio_buttons), adm5120_add_device_gpio_buttons(ARRAY_SIZE(br61xx_gpio_buttons),
br61xx_gpio_buttons); br61xx_gpio_buttons);
/* TODO: setup mac addresses */ br61xx_mac_setup();
} }

View file

@ -12,6 +12,7 @@
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/etherdevice.h>
#include <asm/bootinfo.h> #include <asm/bootinfo.h>

View file

@ -11,6 +11,11 @@
#include "infineon.h" #include "infineon.h"
#include <prom/admboot.h>
#define EASY_CONFIG_OFFSET 0x10000
#define EASY_CONFIG_SIZE 0x1000
#ifdef CONFIG_MTD_PARTITIONS #ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition easy_partitions[] = { static struct mtd_partition easy_partitions[] = {
{ {
@ -30,6 +35,20 @@ static struct mtd_partition easy_partitions[] = {
}; };
#endif /* CONFIG_MTD_PARTITIONS */ #endif /* CONFIG_MTD_PARTITIONS */
static __init void easy_setup_mac(void)
{
u8 mac_base[6];
int err;
err = admboot_get_mac_base(EASY_CONFIG_OFFSET,
EASY_CONFIG_SIZE, mac_base);
if ((err) || !is_valid_ether_addr(mac_base))
random_ether_addr(mac_base);
adm5120_setup_eth_macs(mac_base);
}
static void switch_bank_gpio3(unsigned bank) static void switch_bank_gpio3(unsigned bank)
{ {
switch (bank) { switch (bank) {
@ -55,6 +74,8 @@ void __init easy_setup_pqfp(void)
#endif /* CONFIG_MTD_PARTITIONS */ #endif /* CONFIG_MTD_PARTITIONS */
adm5120_add_device_flash(0); adm5120_add_device_flash(0);
easy_setup_mac();
} }
static void switch_bank_gpio5(unsigned bank) static void switch_bank_gpio5(unsigned bank)
@ -82,4 +103,6 @@ void __init easy_setup_bga(void)
#endif /* CONFIG_MTD_PARTITIONS */ #endif /* CONFIG_MTD_PARTITIONS */
adm5120_add_device_flash(0); adm5120_add_device_flash(0);
easy_setup_mac();
} }

View file

@ -11,9 +11,10 @@
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/gpio.h>
#include <linux/etherdevice.h>
#include <asm/bootinfo.h> #include <asm/bootinfo.h>
#include <linux/gpio.h>
#include <asm/mach-adm5120/adm5120_defs.h> #include <asm/mach-adm5120/adm5120_defs.h>
#include <asm/mach-adm5120/adm5120_irq.h> #include <asm/mach-adm5120/adm5120_irq.h>

View file

@ -101,15 +101,13 @@ struct gpio_button rb1xx_gpio_buttons[] __initdata = {
static void __init rb1xx_mac_setup(void) static void __init rb1xx_mac_setup(void)
{ {
int i, j; if (rb_hs.mac_base != NULL && is_valid_ether_addr(rb_hs.mac_base)) {
adm5120_setup_eth_macs(rb_hs.mac_base);
} else {
u8 mac[ETH_ALEN];
if (!rb_hs.mac_base) random_ether_addr(mac);
return; adm5120_setup_eth_macs(mac);
for (i = 0; i < 6; i++) {
for (j = 0; j < 5; j++)
adm5120_eth_macs[i][j] = rb_hs.mac_base[j];
adm5120_eth_macs[i][5] = rb_hs.mac_base[5]+i;
} }
} }

View file

@ -13,6 +13,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/etherdevice.h>
#include <asm/bootinfo.h> #include <asm/bootinfo.h>

View file

@ -2,6 +2,7 @@
# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel # Makefile for the ADMtek ADM5120 SoC specific parts of the kernel
# #
lib-y += admboot.o
lib-y += bootbase.o lib-y += bootbase.o
lib-y += cfe.o lib-y += cfe.o
lib-y += generic.o lib-y += generic.o

View file

@ -0,0 +1,46 @@
/*
* ADMBoot specific prom routines
*
* Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <asm/addrspace.h>
#include <asm/byteorder.h>
#include <asm/mach-adm5120/adm5120_defs.h>
#include <prom/admboot.h>
#include "prom_read.h"
#define ADMBOOT_MAGIC_MAC_BASE 0x636D676D /* 'mgmc' */
int __init admboot_get_mac_base(u32 offset, u32 len, u8 *mac)
{
u8 *cfg;
int i;
cfg = (u8 *) KSEG1ADDR(ADM5120_SRAM0_BASE + offset);
for (i = 0; i < len; i += 4) {
u32 magic;
magic = prom_read_le32(cfg + i);
if (magic == ADMBOOT_MAGIC_MAC_BASE) {
int j;
for (j = 0; j < 6; j++)
mac[j] = cfg[i + 4 + j];
return 0;
}
}
return -ENXIO;
}

View file

@ -53,6 +53,14 @@ static inline u32 bootbase_get_bootext_addr(void)
return prom_read_be32(&board_info->bootext_addr); return prom_read_be32(&board_info->bootext_addr);
} }
static inline void bootbase_get_mac(u8 *mac)
{
int i;
for (i = 0; i < 6; i++)
mac[i] = board_info->mac[i];
}
static inline u16 bootbase_get_vendor_id(void) static inline u16 bootbase_get_vendor_id(void)
{ {
#define CHECK_VENDOR(n) (strnicmp(board_info->vendor, (n), strlen(n)) == 0) #define CHECK_VENDOR(n) (strnicmp(board_info->vendor, (n), strlen(n)) == 0)
@ -102,6 +110,7 @@ int __init bootbase_present(void)
bootbase_info.vendor_id = bootbase_get_vendor_id(); bootbase_info.vendor_id = bootbase_get_vendor_id();
bootbase_info.board_id = bootbase_get_board_id(); bootbase_info.board_id = bootbase_get_board_id();
bootbase_get_mac(bootbase_info.mac);
bootbase_found = 1; bootbase_found = 1;

View file

@ -11,6 +11,8 @@
#include "p-33x.h" #include "p-33x.h"
#include <prom/zynos.h>
#define P33X_GPIO_FLASH_A20 ADM5120_GPIO_PIN5 #define P33X_GPIO_FLASH_A20 ADM5120_GPIO_PIN5
#define P33X_GPIO_DEV_MASK (1 << P33X_GPIO_FLASH_A20) #define P33X_GPIO_DEV_MASK (1 << P33X_GPIO_FLASH_A20)
@ -76,6 +78,8 @@ void __init p33x_generic_setup(void)
adm5120_add_device_flash(0); adm5120_add_device_flash(0);
adm5120_add_device_gpio(P33X_GPIO_DEV_MASK); adm5120_add_device_gpio(P33X_GPIO_DEV_MASK);
adm5120_setup_eth_macs(bootbase_info.mac);
adm5120_add_device_switch(5, p33x_vlans); adm5120_add_device_switch(5, p33x_vlans);
adm5120_pci_set_irq_map(ARRAY_SIZE(p33x_pci_irqs), p33x_pci_irqs); adm5120_pci_set_irq_map(ARRAY_SIZE(p33x_pci_irqs), p33x_pci_irqs);

View file

@ -11,12 +11,12 @@
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/gpio.h>
#include <asm/bootinfo.h> #include <asm/bootinfo.h>
#include <linux/gpio.h>
#include <asm/mach-adm5120/adm5120_board.h> #include <asm/mach-adm5120/adm5120_board.h>
#include <asm/mach-adm5120/adm5120_platform.h> #include <asm/mach-adm5120/adm5120_platform.h>
#include <asm/mach-adm5120/adm5120_irq.h> #include <asm/mach-adm5120/adm5120_irq.h>
extern void p33x_generic_setup(void) __init; extern void p33x_generic_setup(void) __init;

View file

@ -57,6 +57,8 @@ static inline void adm5120_pci_set_irq_map(unsigned int nr_irqs,
} }
#endif #endif
extern void adm5120_setup_eth_macs(u8 *mac_base) __init;
extern struct adm5120_flash_platform_data adm5120_flash0_data; extern struct adm5120_flash_platform_data adm5120_flash0_data;
extern struct adm5120_flash_platform_data adm5120_flash1_data; extern struct adm5120_flash_platform_data adm5120_flash1_data;

View file

@ -0,0 +1,17 @@
/*
* ADMBoot specific definitions
*
* Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
*/
#ifndef _ADMBOOT_H
#define _ADMBOOT_H
extern int admboot_get_mac_base(u32 offset, u32 len, u8 *mac) __init;
#endif /* _ADMBOOT_H */